tcl/interface/sysfsgpio-raspberrypi.cfg

   1 #
   2 # Config for using RaspberryPi's expansion header
   3 #
   4 # This is best used with a fast enough buffer but also
   5 # is suitable for direct connection if the target voltage
   6 # matches RPi's 3.3V
   7 #
   8 # Do not forget the GND connection, pin 6 of the expansion header.
   9 #
  10
  11 interface sysfsgpio
  12
  13 # Each of the JTAG lines need a gpio number set: tck tms tdi tdo
  14 # Header pin numbers: 23 22 19 21
  15 sysfsgpio_jtag_nums 11 25 10 9
  16
  17 # Each of the SWD lines need a gpio number set: swclk swdio
  18 # Header pin numbers: 23 22
  19 sysfsgpio_swd_nums 11 25
  20
  21 # If you define trst or srst, use appropriate reset_config
  22 # Header pin numbers: TRST - 26, SRST - 18
  23
  24 # sysfsgpio_trst_num 7
  25 # reset_config trst_only
  26
  27 # sysfsgpio_srst_num 24
  28 # reset_config srst_only srst_push_pull
  29
  30 # or if you have both connected,
  31 # reset_config trst_and_srst srst_push_pull