tcl/interface/imx-native.cfg

   1 #
   2 # Config for using NXP IMX CPU
   3 #
   4 # This is best used with a fast enough buffer but also
   5 # is suitable for direct connection if the target voltage
   6 # matches to host voltage and the cable is short enough.
   7 #
   8 #
   9
  10 interface imx_gpio
  11
  12 # For most IMX processors 0x0209c000
  13 imx_gpio_peripheral_base 0x0209c000
  14
  15 # Transition delay calculation: SPEED_COEFF/khz - SPEED_OFFSET
  16 # These depend on system clock, calibrated for IMX6UL@528MHz
  17 # imx_gpio_speed SPEED_COEFF SPEED_OFFSET
  18 imx_gpio_speed_coeffs 50000 50
  19
  20 # Each of the JTAG lines need a gpio number set: tck tms tdi tdo.
  21 # Example configuration:
  22 # imx_gpio_jtag_nums 6 7 8 9
  23
  24 # SWD interface pins: swclk swdio
  25 # Example configuration:
  26 imx_gpio_swd_nums 1 6
  27
  28 # imx_gpio_trst_num 10
  29 # reset_config trst_only
  30
  31 # imx_gpio_srst_num 11
  32 # reset_config srst_only srst_push_pull
  33
  34 # or if you have both connected,
  35 # reset_config trst_and_srst srst_push_pull