cfg: add STM32F3-DISCOVERY board support
[openocd.git] / tcl / board / stm32f3discovery.cfg
1 # This is an STM32F3 discovery board with a single STM32F303VCT6 chip.
2 # http://www.st.com/internet/evalboard/product/254044.jsp
3
4 source [find interface/stlink-v2.cfg]
5
6 source [find target/stm32f3x_stlink.cfg]
7
8 # use hardware reset, connect under reset
9 reset_config srst_only srst_nogate