build: fix make dist

[openocd.git] / src / transport / transport.c

/*
 * Copyright (c) 2010 by David Brownell
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.

 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.

 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

/** @file
 * Infrastructure for specifying and managing the transport protocol
 * used in a given debug or programming session.
 *
 * Examples of "debug-capable" transports are JTAG or SWD.
 * Additionally, JTAG supports boundary scan testing.
 *
 * Examples of "programming-capable" transports include SPI or UART;
 * those are used (often mediated by a ROM bootloader) for ISP style
 * programming, to perform an initial load of code into flash, or
 * sometimes into SRAM.  Target code could use "variant" options to
 * decide how to use such protocols.  For example, Cortex-M3 cores
 * from TI/Luminary and from NXP use different protocols for for
 * UART or SPI based firmware loading.
 *
 * As a rule, there are protocols layered on top of the transport.
 * For example, different chip families use JTAG in different ways
 * for debugging.  Also, each family that supports programming over
 * a UART link for initial firmware loading tends to define its own
 * messaging and error handling.
 */

#include <helper/log.h>

#include <transport/transport.h>

extern struct command_context *global_cmd_ctx;


/*-----------------------------------------------------------------------*/

/*
 * Infrastructure internals
 */

/** List of transports known to OpenOCD. */
static struct transport *transport_list;

/**
 * NULL-terminated Vector of names of transports which the
 * currently selected debug adapter supports.  This is declared
 * by the time that adapter is fully set up.
 */
static const char **allowed_transports;

/** * The transport being used for the current OpenOCD session.  */
static struct transport *session;

static  int transport_select(struct command_context *ctx, const char *name)
{
        /* name may only identify a known transport;
         * caller guarantees session's transport isn't yet set.*/
        for (struct transport *t = transport_list; t; t = t->next) {
                        if (strcmp(t->name, name) == 0) {
                                int retval = t->select(ctx);
                        /* select() registers commands specific to this
                         * transport, and may also reset the link, e.g.
                         * forcing it to JTAG or SWD mode.
                         */
                        if (retval == ERROR_OK)
                                session = t;
                        else
                                LOG_ERROR("Error selecting '%s' as "
                                        "transport", t->name);
                        return retval;
                }
        }

        LOG_ERROR("No transport named '%s' is available.", name);
        return ERROR_FAIL;
}

/**
 * Called by debug adapter drivers, or affiliated Tcl config scripts,
 * to declare the set of transports supported by an adapter.  When
 * there is only one member of that set, it is automatically selected.
 */
int allow_transports(struct command_context *ctx, const char **vector)
{
        /* NOTE:  caller is required to provide only a list
         * of *valid* transport names
         *
         * REVISIT should we validate that?  and insist there's
         * at least one non-NULL element in that list?
         *
         * ... allow removals, e.g. external strapping prevents use
         * of one transport; C code should be definitive about what
         * can be used when all goes well.
         */
        if (allowed_transports != NULL || session) {
                LOG_ERROR("Can't modify the set of allowed transports.");
                return ERROR_FAIL;
        }


        allowed_transports = vector;

        /* autoselect if there's no choice ... */
        if (!vector[1]) {
                LOG_INFO("only one transport option; autoselect '%s'",
                                vector[0]);
                return transport_select(ctx, vector [0]);
        } else {
                /* guard against user config errors */
                LOG_WARNING("must select a transport.");
                while (*vector) {
                        LOG_DEBUG("allow transport '%s'", *vector);
                        vector++;
                }
                return ERROR_OK;
        }
}


/**
 * Used to verify corrrect adapter driver initialization.
 *
 * @returns true iff the adapter declared one or more transports.
 */
bool transports_are_declared(void)
{
        return allowed_transports != NULL;
}

/**
 * Registers a transport.  There are general purpose transports
 * (such as JTAG), as well as relatively proprietary ones which are
 * specific to a given chip (or chip family).
 *
 * Code implementing a transport needs to register it before it can
 * be selected and then activated.  This is a dynamic process, so
 * that chips (and families) can define transports as needed (without
 * nneeding error-prone static tables).
 *
 * @param new_transport the transport being registered.  On a
 * successful return, this memory is owned by the transport framework.
 *
 * @returns ERROR_OK on success, else a fault code.
 */
int transport_register(struct transport *new_transport)
{
        struct transport *t;

        for (t = transport_list; t; t = t->next) {
                if (strcmp(t->name, new_transport->name) == 0) {
                        LOG_ERROR("transport name already used");
                        return ERROR_FAIL;
                }
        }

        if (!new_transport->select || !new_transport->init) {
                LOG_ERROR("invalid transport %s", new_transport->name);
        }

        /* splice this into the list */
        new_transport->next = transport_list;
        transport_list = new_transport;
        LOG_DEBUG("register '%s'", new_transport->name);

        return ERROR_OK;
}

/**
 * Returns the transport currently being used by this debug or
 * programming session.
 *
 * @returns handle to the read-only transport entity.
 */
struct transport *get_current_transport(void)
{

        /* REVISIT -- constify */
        return session;
}


/*-----------------------------------------------------------------------*/

/*
 * Infrastructure for Tcl interface to transports.
 */

/**
 * Makes and stores a copy of a set of transports passed as
 * parameters to a command.
 *
 * @param vector where the resulting copy is stored, as an argv-style
 *      NULL-terminated vector.
 */
COMMAND_HELPER(transport_list_parse, char ***vector)
{
        char **argv;
        unsigned n = CMD_ARGC;
        unsigned j = 0;

        *vector = NULL;

        if (n < 1)
                return ERROR_COMMAND_SYNTAX_ERROR;

        /* our return vector must be NULL terminated */
        argv = (char **) calloc(n + 1, sizeof(char *));
        if (argv == NULL)
                return ERROR_FAIL;

        for (unsigned i = 0; i < n; i++) {
                struct transport *t;

                for (t = transport_list; t; t = t->next) {
                        if (strcmp(t->name, CMD_ARGV[i]) != 0)
                                continue;
                        argv[j++] = strdup(CMD_ARGV[i]);
                        break;
                }
                if (!t) {
                        LOG_ERROR("no such transport '%s'", CMD_ARGV[i]);
                        goto fail;
                }
        }

        *vector = argv;
        return ERROR_OK;

fail:
        for (unsigned i = 0; i < n; i++)
                free(argv[i]);
        free(argv);
        return ERROR_FAIL;
}

COMMAND_HANDLER(handle_transport_init)
{
        LOG_DEBUG("%s", __func__);
        if (!session) {
                LOG_ERROR("session's transport is not selected.");
                return ERROR_FAIL;
        }

        return session->init(CMD_CTX);
}

COMMAND_HANDLER(handle_transport_list)
{
        if (CMD_ARGC != 0)
                return ERROR_COMMAND_SYNTAX_ERROR;

        command_print(CMD_CTX, "The following transports are available:");

        for (struct transport *t = transport_list; t; t = t->next)
                command_print(CMD_CTX, "\t%s", t->name);

        return ERROR_OK;
}

/**
 * Implements the Tcl "transport select" command, choosing the
 * transport to be used in this debug session from among the
 * set supported by the debug adapter being used.  Return value
 * is scriptable (allowing "if swd then..." etc).
 */
static int jim_transport_select(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
{
        switch (argc) {
        case 1:                 /* return/display */
                if (!session) {
                        LOG_ERROR("session's transport is not selected.");
                        return JIM_ERR;
                } else {
                        Jim_SetResultString(interp, session->name, -1);
                        return JIM_OK;
                }
                break;
        case 2:                 /* assign */
        if (session) {
                /* can't change session's transport after-the-fact */
                LOG_ERROR("session's transport is already selected.");
                return JIM_ERR;
        }

        /* Is this transport supported by our debug adapter?
         * Example, "JTAG-only" means SWD is not supported.
         *
         * NOTE:  requires adapter to have been set up, with
         * transports declared via C.
         */
        if (!allowed_transports) {
                LOG_ERROR("Debug adapter doesn't support any transports?");
                return JIM_ERR;
        }

        for (unsigned i = 0; allowed_transports[i]; i++) {

                if (strcmp(allowed_transports[i], argv[1]->bytes) == 0)
                return transport_select(global_cmd_ctx, argv[1]->bytes);
        }

                LOG_ERROR("Debug adapter doesn't support '%s' "
                        "transport", argv[1]->bytes);
                return JIM_ERR;
                break;
        default:
                Jim_WrongNumArgs(interp, 1, argv, "[too many parameters]");
                return JIM_ERR;
        }
}

static const struct command_registration transport_commands[] = {
        {
                .name = "init",
                .handler = handle_transport_init,
                /* this would be COMMAND_CONFIG ... except that
                 * it needs to trigger event handlers that may
                 * require COMMAND_EXEC ...
                 */
                .mode = COMMAND_ANY,
                .help = "Initialize this session's transport",
        },
        {
                .name = "list",
                .handler = handle_transport_list,
                .mode = COMMAND_ANY,
                .help = "list all built-in transports",
        },
        {
                .name = "select",
                .jim_handler = jim_transport_select,
                .mode = COMMAND_ANY,
                .help = "Select this session's transport",
                .usage = "[transport_name]",
        },
        COMMAND_REGISTRATION_DONE
};

static const struct command_registration transport_group[] = {
        {
                .name = "transport",
                .mode = COMMAND_ANY,
                .help = "Transport command group",
                .chain = transport_commands,
        },
        COMMAND_REGISTRATION_DONE
};


int transport_register_commands(struct command_context *ctx)
{
        return register_commands(ctx, NULL, transport_group);
}