src/target/target/lpc2148.cfg

   1 #delays on reset lines
   2 jtag_nsrst_delay 200
   3 jtag_ntrst_delay 200
   4
   5 #use combined on interfaces or targets that can't set TRST/SRST separately
   6 reset_config trst_and_srst srst_pulls_trst
   7
   8 #LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough
   9 jtag_reset 1 1
  10 jtag_reset 0 0
  11
  12 #jtag scan chain
  13 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
  14 jtag_device 4 0x1 0xf 0xe
  15
  16 #target <type> <startup mode>
  17 #target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
  18 target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
  19 run_and_halt_time 0 30
  20
  21 working_area 0 0x40000000 0x4000 nobackup
  22
  23 #flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
  24 flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765
  25
  26 # For more information about the configuration files, take a look at:
  27 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger