2 * Support for RISC-V, debug version 0.11. This was never an officially adopted
3 * spec, but SiFive made some silicon that uses it.
14 #include "target/target.h"
15 #include "target/algorithm.h"
16 #include "target/target_type.h"
18 #include "jtag/jtag.h"
19 #include "target/register.h"
20 #include "target/breakpoints.h"
21 #include "helper/time_support.h"
27 * Since almost everything can be accomplish by scanning the dbus register, all
28 * functions here assume dbus is already selected. The exception are functions
29 * called directly by OpenOCD, which can't assume anything about what's
30 * currently in IR. They should set IR to dbus explicitly.
36 * At the bottom of the stack are the OpenOCD JTAG functions:
41 * There are a few functions to just instantly shift a register and get its
47 * Because doing one scan and waiting for the result is slow, most functions
48 * batch up a bunch of dbus writes and then execute them all at once. They use
49 * the scans "class" for this:
54 * Usually you new(), call a bunch of add functions, then execute() and look
55 * at the results by calling scans_get...()
57 * Optimized functions will directly use the scans class above, but slightly
58 * lazier code will use the cache functions that in turn use the scans
63 * cache_set... update a local structure, which is then synced to the target
64 * with cache_write(). Only Debug RAM words that are actually changed are sent
65 * to the target. Afterwards use cache_get... to read results.
68 #define get_field(reg, mask) (((reg) & (mask)) / ((mask) & ~((mask) << 1)))
69 #define set_field(reg, mask, val) (((reg) & ~(mask)) | (((val) * ((mask) & ~((mask) << 1))) & (mask)))
71 #define DIM(x) (sizeof(x)/sizeof(*x))
73 /* Constants for legacy SiFive hardware breakpoints. */
74 #define CSR_BPCONTROL_X (1<<0)
75 #define CSR_BPCONTROL_W (1<<1)
76 #define CSR_BPCONTROL_R (1<<2)
77 #define CSR_BPCONTROL_U (1<<3)
78 #define CSR_BPCONTROL_S (1<<4)
79 #define CSR_BPCONTROL_H (1<<5)
80 #define CSR_BPCONTROL_M (1<<6)
81 #define CSR_BPCONTROL_BPMATCH (0xf<<7)
82 #define CSR_BPCONTROL_BPACTION (0xff<<11)
84 #define DEBUG_ROM_START 0x800
85 #define DEBUG_ROM_RESUME (DEBUG_ROM_START + 4)
86 #define DEBUG_ROM_EXCEPTION (DEBUG_ROM_START + 8)
87 #define DEBUG_RAM_START 0x400
89 #define SETHALTNOT 0x10c
91 /*** JTAG registers. ***/
93 #define DTMCONTROL 0x10
94 #define DTMCONTROL_DBUS_RESET (1<<16)
95 #define DTMCONTROL_IDLE (7<<10)
96 #define DTMCONTROL_ADDRBITS (0xf<<4)
97 #define DTMCONTROL_VERSION (0xf)
100 #define DBUS_OP_START 0
101 #define DBUS_OP_SIZE 2
108 DBUS_STATUS_SUCCESS
= 0,
109 DBUS_STATUS_FAILED
= 2,
112 #define DBUS_DATA_START 2
113 #define DBUS_DATA_SIZE 34
114 #define DBUS_ADDRESS_START 36
128 /*** Debug Bus registers. ***/
130 #define DMCONTROL 0x10
131 #define DMCONTROL_INTERRUPT (((uint64_t)1)<<33)
132 #define DMCONTROL_HALTNOT (((uint64_t)1)<<32)
133 #define DMCONTROL_BUSERROR (7<<19)
134 #define DMCONTROL_SERIAL (3<<16)
135 #define DMCONTROL_AUTOINCREMENT (1<<15)
136 #define DMCONTROL_ACCESS (7<<12)
137 #define DMCONTROL_HARTID (0x3ff<<2)
138 #define DMCONTROL_NDRESET (1<<1)
139 #define DMCONTROL_FULLRESET 1
142 #define DMINFO_ABUSSIZE (0x7fU<<25)
143 #define DMINFO_SERIALCOUNT (0xf<<21)
144 #define DMINFO_ACCESS128 (1<<20)
145 #define DMINFO_ACCESS64 (1<<19)
146 #define DMINFO_ACCESS32 (1<<18)
147 #define DMINFO_ACCESS16 (1<<17)
148 #define DMINFO_ACCESS8 (1<<16)
149 #define DMINFO_DRAMSIZE (0x3f<<10)
150 #define DMINFO_AUTHENTICATED (1<<5)
151 #define DMINFO_AUTHBUSY (1<<4)
152 #define DMINFO_AUTHTYPE (3<<2)
153 #define DMINFO_VERSION 3
155 /*** Info about the core being debugged. ***/
157 #define DBUS_ADDRESS_UNKNOWN 0xffff
159 #define DRAM_CACHE_SIZE 16
166 bool read
, write
, execute
;
170 struct memory_cache_line
{
177 /* Number of address bits in the dbus register. */
179 /* Number of words in Debug RAM. */
180 unsigned int dramsize
;
185 /* The value that mstatus actually has on the target right now. This is not
186 * the value we present to the user. That one may be stored in the
188 uint64_t mstatus_actual
;
190 struct memory_cache_line dram_cache
[DRAM_CACHE_SIZE
];
192 /* Number of run-test/idle cycles the target requests we do after each dbus
194 unsigned int dtmcontrol_idle
;
196 /* This value is incremented every time a dbus access comes back as "busy".
197 * It's used to determine how many run-test/idle cycles to feed the target
198 * in between accesses. */
199 unsigned int dbus_busy_delay
;
201 /* This value is incremented every time we read the debug interrupt as
202 * high. It's used to add extra run-test/idle cycles after setting debug
203 * interrupt high, so ideally we never have to perform a whole extra scan
204 * before the interrupt is cleared. */
205 unsigned int interrupt_high_delay
;
207 bool need_strict_step
;
216 /*** Necessary prototypes. ***/
218 static int poll_target(struct target
*target
, bool announce
);
219 static int riscv011_poll(struct target
*target
);
220 static int get_register(struct target
*target
, riscv_reg_t
*value
, int hartid
,
223 /*** Utility functions. ***/
225 #define DEBUG_LENGTH 264
227 static riscv011_info_t
*get_info(const struct target
*target
)
229 riscv_info_t
*info
= (riscv_info_t
*) target
->arch_info
;
230 return (riscv011_info_t
*) info
->version_specific
;
233 static unsigned int slot_offset(const struct target
*target
, slot_t slot
)
235 riscv011_info_t
*info
= get_info(target
);
236 switch (riscv_xlen(target
)) {
239 case SLOT0
: return 4;
240 case SLOT1
: return 5;
241 case SLOT_LAST
: return info
->dramsize
-1;
246 case SLOT0
: return 4;
247 case SLOT1
: return 6;
248 case SLOT_LAST
: return info
->dramsize
-2;
251 LOG_ERROR("slot_offset called with xlen=%d, slot=%d",
252 riscv_xlen(target
), slot
);
254 return 0; /* Silence -Werror=return-type */
257 static uint32_t load_slot(const struct target
*target
, unsigned int dest
,
260 unsigned int offset
= DEBUG_RAM_START
+ 4 * slot_offset(target
, slot
);
261 return load(target
, dest
, ZERO
, offset
);
264 static uint32_t store_slot(const struct target
*target
, unsigned int src
,
267 unsigned int offset
= DEBUG_RAM_START
+ 4 * slot_offset(target
, slot
);
268 return store(target
, src
, ZERO
, offset
);
271 static uint16_t dram_address(unsigned int index
)
276 return 0x40 + index
- 0x10;
279 static uint32_t dtmcontrol_scan(struct target
*target
, uint32_t out
)
281 struct scan_field field
;
283 uint8_t out_value
[4];
285 buf_set_u32(out_value
, 0, 32, out
);
287 jtag_add_ir_scan(target
->tap
, &select_dtmcontrol
, TAP_IDLE
);
290 field
.out_value
= out_value
;
291 field
.in_value
= in_value
;
292 jtag_add_dr_scan(target
->tap
, 1, &field
, TAP_IDLE
);
294 /* Always return to dbus. */
295 jtag_add_ir_scan(target
->tap
, &select_dbus
, TAP_IDLE
);
297 int retval
= jtag_execute_queue();
298 if (retval
!= ERROR_OK
) {
299 LOG_ERROR("failed jtag scan: %d", retval
);
303 uint32_t in
= buf_get_u32(field
.in_value
, 0, 32);
304 LOG_DEBUG("DTMCONTROL: 0x%x -> 0x%x", out
, in
);
309 static uint32_t idcode_scan(struct target
*target
)
311 struct scan_field field
;
314 jtag_add_ir_scan(target
->tap
, &select_idcode
, TAP_IDLE
);
317 field
.out_value
= NULL
;
318 field
.in_value
= in_value
;
319 jtag_add_dr_scan(target
->tap
, 1, &field
, TAP_IDLE
);
321 int retval
= jtag_execute_queue();
322 if (retval
!= ERROR_OK
) {
323 LOG_ERROR("failed jtag scan: %d", retval
);
327 /* Always return to dbus. */
328 jtag_add_ir_scan(target
->tap
, &select_dbus
, TAP_IDLE
);
330 uint32_t in
= buf_get_u32(field
.in_value
, 0, 32);
331 LOG_DEBUG("IDCODE: 0x0 -> 0x%x", in
);
336 static void increase_dbus_busy_delay(struct target
*target
)
338 riscv011_info_t
*info
= get_info(target
);
339 info
->dbus_busy_delay
+= info
->dbus_busy_delay
/ 10 + 1;
340 LOG_DEBUG("dtmcontrol_idle=%d, dbus_busy_delay=%d, interrupt_high_delay=%d",
341 info
->dtmcontrol_idle
, info
->dbus_busy_delay
,
342 info
->interrupt_high_delay
);
344 dtmcontrol_scan(target
, DTMCONTROL_DBUS_RESET
);
347 static void increase_interrupt_high_delay(struct target
*target
)
349 riscv011_info_t
*info
= get_info(target
);
350 info
->interrupt_high_delay
+= info
->interrupt_high_delay
/ 10 + 1;
351 LOG_DEBUG("dtmcontrol_idle=%d, dbus_busy_delay=%d, interrupt_high_delay=%d",
352 info
->dtmcontrol_idle
, info
->dbus_busy_delay
,
353 info
->interrupt_high_delay
);
356 static void add_dbus_scan(const struct target
*target
, struct scan_field
*field
,
357 uint8_t *out_value
, uint8_t *in_value
, dbus_op_t op
,
358 uint16_t address
, uint64_t data
)
360 riscv011_info_t
*info
= get_info(target
);
362 field
->num_bits
= info
->addrbits
+ DBUS_OP_SIZE
+ DBUS_DATA_SIZE
;
363 field
->in_value
= in_value
;
364 field
->out_value
= out_value
;
366 buf_set_u64(out_value
, DBUS_OP_START
, DBUS_OP_SIZE
, op
);
367 buf_set_u64(out_value
, DBUS_DATA_START
, DBUS_DATA_SIZE
, data
);
368 buf_set_u64(out_value
, DBUS_ADDRESS_START
, info
->addrbits
, address
);
370 jtag_add_dr_scan(target
->tap
, 1, field
, TAP_IDLE
);
372 int idle_count
= info
->dtmcontrol_idle
+ info
->dbus_busy_delay
;
373 if (data
& DMCONTROL_INTERRUPT
)
374 idle_count
+= info
->interrupt_high_delay
;
377 jtag_add_runtest(idle_count
, TAP_IDLE
);
380 static void dump_field(const struct scan_field
*field
)
382 static const char * const op_string
[] = {"nop", "r", "w", "?"};
383 static const char * const status_string
[] = {"+", "?", "F", "b"};
385 if (debug_level
< LOG_LVL_DEBUG
)
388 uint64_t out
= buf_get_u64(field
->out_value
, 0, field
->num_bits
);
389 unsigned int out_op
= (out
>> DBUS_OP_START
) & ((1 << DBUS_OP_SIZE
) - 1);
390 char out_interrupt
= ((out
>> DBUS_DATA_START
) & DMCONTROL_INTERRUPT
) ? 'i' : '.';
391 char out_haltnot
= ((out
>> DBUS_DATA_START
) & DMCONTROL_HALTNOT
) ? 'h' : '.';
392 unsigned int out_data
= out
>> 2;
393 unsigned int out_address
= out
>> DBUS_ADDRESS_START
;
394 uint64_t in
= buf_get_u64(field
->in_value
, 0, field
->num_bits
);
395 unsigned int in_op
= (in
>> DBUS_OP_START
) & ((1 << DBUS_OP_SIZE
) - 1);
396 char in_interrupt
= ((in
>> DBUS_DATA_START
) & DMCONTROL_INTERRUPT
) ? 'i' : '.';
397 char in_haltnot
= ((in
>> DBUS_DATA_START
) & DMCONTROL_HALTNOT
) ? 'h' : '.';
398 unsigned int in_data
= in
>> 2;
399 unsigned int in_address
= in
>> DBUS_ADDRESS_START
;
401 log_printf_lf(LOG_LVL_DEBUG
,
402 __FILE__
, __LINE__
, "scan",
403 "%db %s %c%c:%08x @%02x -> %s %c%c:%08x @%02x",
405 op_string
[out_op
], out_interrupt
, out_haltnot
, out_data
,
407 status_string
[in_op
], in_interrupt
, in_haltnot
, in_data
,
411 static dbus_status_t
dbus_scan(struct target
*target
, uint16_t *address_in
,
412 uint64_t *data_in
, dbus_op_t op
, uint16_t address_out
, uint64_t data_out
)
414 riscv011_info_t
*info
= get_info(target
);
417 struct scan_field field
= {
418 .num_bits
= info
->addrbits
+ DBUS_OP_SIZE
+ DBUS_DATA_SIZE
,
423 assert(info
->addrbits
!= 0);
425 buf_set_u64(out
, DBUS_OP_START
, DBUS_OP_SIZE
, op
);
426 buf_set_u64(out
, DBUS_DATA_START
, DBUS_DATA_SIZE
, data_out
);
427 buf_set_u64(out
, DBUS_ADDRESS_START
, info
->addrbits
, address_out
);
429 /* Assume dbus is already selected. */
430 jtag_add_dr_scan(target
->tap
, 1, &field
, TAP_IDLE
);
432 int idle_count
= info
->dtmcontrol_idle
+ info
->dbus_busy_delay
;
435 jtag_add_runtest(idle_count
, TAP_IDLE
);
437 int retval
= jtag_execute_queue();
438 if (retval
!= ERROR_OK
) {
439 LOG_ERROR("dbus_scan failed jtag scan");
440 return DBUS_STATUS_FAILED
;
444 *data_in
= buf_get_u64(in
, DBUS_DATA_START
, DBUS_DATA_SIZE
);
447 *address_in
= buf_get_u32(in
, DBUS_ADDRESS_START
, info
->addrbits
);
451 return buf_get_u32(in
, DBUS_OP_START
, DBUS_OP_SIZE
);
454 static uint64_t dbus_read(struct target
*target
, uint16_t address
)
457 dbus_status_t status
;
460 /* If the previous read/write was to the same address, we will get the read data
461 * from the previous access.
462 * While somewhat nonintuitive, this is an efficient way to get the data.
467 status
= dbus_scan(target
, &address_in
, &value
, DBUS_OP_READ
, address
, 0);
468 if (status
== DBUS_STATUS_BUSY
)
469 increase_dbus_busy_delay(target
);
470 if (status
== DBUS_STATUS_FAILED
) {
471 LOG_ERROR("dbus_read(0x%x) failed!", address
);
474 } while (((status
== DBUS_STATUS_BUSY
) || (address_in
!= address
)) &&
477 if (status
!= DBUS_STATUS_SUCCESS
)
478 LOG_ERROR("failed read from 0x%x; value=0x%" PRIx64
", status=%d\n", address
, value
, status
);
483 static void dbus_write(struct target
*target
, uint16_t address
, uint64_t value
)
485 dbus_status_t status
= DBUS_STATUS_BUSY
;
487 while (status
== DBUS_STATUS_BUSY
&& i
++ < 256) {
488 status
= dbus_scan(target
, NULL
, NULL
, DBUS_OP_WRITE
, address
, value
);
489 if (status
== DBUS_STATUS_BUSY
)
490 increase_dbus_busy_delay(target
);
492 if (status
!= DBUS_STATUS_SUCCESS
)
493 LOG_ERROR("failed to write 0x%" PRIx64
" to 0x%x; status=%d\n", value
, address
, status
);
496 /*** scans "class" ***/
499 /* Number of scans that space is reserved for. */
500 unsigned int scan_count
;
501 /* Size reserved in memory for each scan, in bytes. */
502 unsigned int scan_size
;
503 unsigned int next_scan
;
506 struct scan_field
*field
;
507 const struct target
*target
;
510 static scans_t
*scans_new(struct target
*target
, unsigned int scan_count
)
512 scans_t
*scans
= malloc(sizeof(scans_t
));
513 scans
->scan_count
= scan_count
;
514 /* This code also gets called before xlen is detected. */
515 if (riscv_xlen(target
))
516 scans
->scan_size
= 2 + riscv_xlen(target
) / 8;
518 scans
->scan_size
= 2 + 128 / 8;
519 scans
->next_scan
= 0;
520 scans
->in
= calloc(scans
->scan_size
, scans
->scan_count
);
521 scans
->out
= calloc(scans
->scan_size
, scans
->scan_count
);
522 scans
->field
= calloc(scans
->scan_count
, sizeof(struct scan_field
));
523 scans
->target
= target
;
527 static scans_t
*scans_delete(scans_t
*scans
)
537 static void scans_reset(scans_t
*scans
)
539 scans
->next_scan
= 0;
542 static void scans_dump(scans_t
*scans
)
544 for (unsigned int i
= 0; i
< scans
->next_scan
; i
++)
545 dump_field(&scans
->field
[i
]);
548 static int scans_execute(scans_t
*scans
)
550 int retval
= jtag_execute_queue();
551 if (retval
!= ERROR_OK
) {
552 LOG_ERROR("failed jtag scan: %d", retval
);
561 /** Add a 32-bit dbus write to the scans structure. */
562 static void scans_add_write32(scans_t
*scans
, uint16_t address
, uint32_t data
,
565 const unsigned int i
= scans
->next_scan
;
566 int data_offset
= scans
->scan_size
* i
;
567 add_dbus_scan(scans
->target
, &scans
->field
[i
], scans
->out
+ data_offset
,
568 scans
->in
+ data_offset
, DBUS_OP_WRITE
, address
,
569 (set_interrupt
? DMCONTROL_INTERRUPT
: 0) | DMCONTROL_HALTNOT
| data
);
571 assert(scans
->next_scan
<= scans
->scan_count
);
574 /** Add a 32-bit dbus write for an instruction that jumps to the beginning of
576 static void scans_add_write_jump(scans_t
*scans
, uint16_t address
,
579 scans_add_write32(scans
, address
,
580 jal(0, (uint32_t) (DEBUG_ROM_RESUME
- (DEBUG_RAM_START
+ 4*address
))),
584 /** Add a 32-bit dbus write for an instruction that loads from the indicated
586 static void scans_add_write_load(scans_t
*scans
, uint16_t address
,
587 unsigned int reg
, slot_t slot
, bool set_interrupt
)
589 scans_add_write32(scans
, address
, load_slot(scans
->target
, reg
, slot
),
593 /** Add a 32-bit dbus write for an instruction that stores to the indicated
595 static void scans_add_write_store(scans_t
*scans
, uint16_t address
,
596 unsigned int reg
, slot_t slot
, bool set_interrupt
)
598 scans_add_write32(scans
, address
, store_slot(scans
->target
, reg
, slot
),
602 /** Add a 32-bit dbus read. */
603 static void scans_add_read32(scans_t
*scans
, uint16_t address
, bool set_interrupt
)
605 assert(scans
->next_scan
< scans
->scan_count
);
606 const unsigned int i
= scans
->next_scan
;
607 int data_offset
= scans
->scan_size
* i
;
608 add_dbus_scan(scans
->target
, &scans
->field
[i
], scans
->out
+ data_offset
,
609 scans
->in
+ data_offset
, DBUS_OP_READ
, address
,
610 (set_interrupt
? DMCONTROL_INTERRUPT
: 0) | DMCONTROL_HALTNOT
);
614 /** Add one or more scans to read the indicated slot. */
615 static void scans_add_read(scans_t
*scans
, slot_t slot
, bool set_interrupt
)
617 const struct target
*target
= scans
->target
;
618 switch (riscv_xlen(target
)) {
620 scans_add_read32(scans
, slot_offset(target
, slot
), set_interrupt
);
623 scans_add_read32(scans
, slot_offset(target
, slot
), false);
624 scans_add_read32(scans
, slot_offset(target
, slot
) + 1, set_interrupt
);
629 static uint32_t scans_get_u32(scans_t
*scans
, unsigned int index
,
630 unsigned first
, unsigned num
)
632 return buf_get_u32(scans
->in
+ scans
->scan_size
* index
, first
, num
);
635 static uint64_t scans_get_u64(scans_t
*scans
, unsigned int index
,
636 unsigned first
, unsigned num
)
638 return buf_get_u64(scans
->in
+ scans
->scan_size
* index
, first
, num
);
641 /*** end of scans class ***/
643 static uint32_t dram_read32(struct target
*target
, unsigned int index
)
645 uint16_t address
= dram_address(index
);
646 uint32_t value
= dbus_read(target
, address
);
650 static void dram_write32(struct target
*target
, unsigned int index
, uint32_t value
,
653 uint64_t dbus_value
= DMCONTROL_HALTNOT
| value
;
655 dbus_value
|= DMCONTROL_INTERRUPT
;
656 dbus_write(target
, dram_address(index
), dbus_value
);
659 /** Read the haltnot and interrupt bits. */
660 static bits_t
read_bits(struct target
*target
)
663 dbus_status_t status
;
665 riscv011_info_t
*info
= get_info(target
);
667 bits_t err_result
= {
675 status
= dbus_scan(target
, &address_in
, &value
, DBUS_OP_READ
, 0, 0);
676 if (status
== DBUS_STATUS_BUSY
) {
677 if (address_in
== (1<<info
->addrbits
) - 1 &&
678 value
== (1ULL<<DBUS_DATA_SIZE
) - 1) {
679 LOG_ERROR("TDO seems to be stuck high.");
682 increase_dbus_busy_delay(target
);
683 } else if (status
== DBUS_STATUS_FAILED
) {
684 /* TODO: return an actual error */
687 } while (status
== DBUS_STATUS_BUSY
&& i
++ < 256);
690 LOG_ERROR("Failed to read from 0x%x; status=%d", address_in
, status
);
693 } while (address_in
> 0x10 && address_in
!= DMCONTROL
);
696 .haltnot
= get_field(value
, DMCONTROL_HALTNOT
),
697 .interrupt
= get_field(value
, DMCONTROL_INTERRUPT
)
702 static int wait_for_debugint_clear(struct target
*target
, bool ignore_first
)
704 time_t start
= time(NULL
);
706 /* Throw away the results of the first read, since they'll contain the
707 * result of the read that happened just before debugint was set.
708 * (Assuming the last scan before calling this function was one that
713 bits_t bits
= read_bits(target
);
716 if (time(NULL
) - start
> riscv_command_timeout_sec
) {
717 LOG_ERROR("Timed out waiting for debug int to clear."
718 "Increase timeout with riscv set_command_timeout_sec.");
724 static int dram_check32(struct target
*target
, unsigned int index
,
727 uint16_t address
= dram_address(index
);
728 uint32_t actual
= dbus_read(target
, address
);
729 if (expected
!= actual
) {
730 LOG_ERROR("Wrote 0x%x to Debug RAM at %d, but read back 0x%x",
731 expected
, index
, actual
);
737 static void cache_set32(struct target
*target
, unsigned int index
, uint32_t data
)
739 riscv011_info_t
*info
= get_info(target
);
740 if (info
->dram_cache
[index
].valid
&&
741 info
->dram_cache
[index
].data
== data
) {
742 /* This is already preset on the target. */
743 LOG_DEBUG("cache[0x%x] = 0x%08x: DASM(0x%x) (hit)", index
, data
, data
);
746 LOG_DEBUG("cache[0x%x] = 0x%08x: DASM(0x%x)", index
, data
, data
);
747 info
->dram_cache
[index
].data
= data
;
748 info
->dram_cache
[index
].valid
= true;
749 info
->dram_cache
[index
].dirty
= true;
752 static void cache_set(struct target
*target
, slot_t slot
, uint64_t data
)
754 unsigned int offset
= slot_offset(target
, slot
);
755 cache_set32(target
, offset
, data
);
756 if (riscv_xlen(target
) > 32)
757 cache_set32(target
, offset
+ 1, data
>> 32);
760 static void cache_set_jump(struct target
*target
, unsigned int index
)
762 cache_set32(target
, index
,
763 jal(0, (uint32_t) (DEBUG_ROM_RESUME
- (DEBUG_RAM_START
+ 4*index
))));
766 static void cache_set_load(struct target
*target
, unsigned int index
,
767 unsigned int reg
, slot_t slot
)
769 uint16_t offset
= DEBUG_RAM_START
+ 4 * slot_offset(target
, slot
);
770 cache_set32(target
, index
, load(target
, reg
, ZERO
, offset
));
773 static void cache_set_store(struct target
*target
, unsigned int index
,
774 unsigned int reg
, slot_t slot
)
776 uint16_t offset
= DEBUG_RAM_START
+ 4 * slot_offset(target
, slot
);
777 cache_set32(target
, index
, store(target
, reg
, ZERO
, offset
));
780 static void dump_debug_ram(struct target
*target
)
782 for (unsigned int i
= 0; i
< DRAM_CACHE_SIZE
; i
++) {
783 uint32_t value
= dram_read32(target
, i
);
784 LOG_ERROR("Debug RAM 0x%x: 0x%08x", i
, value
);
788 /* Call this if the code you just ran writes to debug RAM entries 0 through 3. */
789 static void cache_invalidate(struct target
*target
)
791 riscv011_info_t
*info
= get_info(target
);
792 for (unsigned int i
= 0; i
< info
->dramsize
; i
++) {
793 info
->dram_cache
[i
].valid
= false;
794 info
->dram_cache
[i
].dirty
= false;
798 /* Called by cache_write() after the program has run. Also call this if you're
799 * running programs without calling cache_write(). */
800 static void cache_clean(struct target
*target
)
802 riscv011_info_t
*info
= get_info(target
);
803 for (unsigned int i
= 0; i
< info
->dramsize
; i
++) {
805 info
->dram_cache
[i
].valid
= false;
806 info
->dram_cache
[i
].dirty
= false;
810 static int cache_check(struct target
*target
)
812 riscv011_info_t
*info
= get_info(target
);
815 for (unsigned int i
= 0; i
< info
->dramsize
; i
++) {
816 if (info
->dram_cache
[i
].valid
&& !info
->dram_cache
[i
].dirty
) {
817 if (dram_check32(target
, i
, info
->dram_cache
[i
].data
) != ERROR_OK
)
823 dump_debug_ram(target
);
830 /** Write cache to the target, and optionally run the program.
831 * Then read the value at address into the cache, assuming address < 128. */
832 #define CACHE_NO_READ 128
833 static int cache_write(struct target
*target
, unsigned int address
, bool run
)
836 riscv011_info_t
*info
= get_info(target
);
837 scans_t
*scans
= scans_new(target
, info
->dramsize
+ 2);
839 unsigned int last
= info
->dramsize
;
840 for (unsigned int i
= 0; i
< info
->dramsize
; i
++) {
841 if (info
->dram_cache
[i
].dirty
)
845 if (last
== info
->dramsize
) {
846 /* Nothing needs to be written to RAM. */
847 dbus_write(target
, DMCONTROL
, DMCONTROL_HALTNOT
| (run
? DMCONTROL_INTERRUPT
: 0));
850 for (unsigned int i
= 0; i
< info
->dramsize
; i
++) {
851 if (info
->dram_cache
[i
].dirty
) {
852 bool set_interrupt
= (i
== last
&& run
);
853 scans_add_write32(scans
, i
, info
->dram_cache
[i
].data
,
859 if (run
|| address
< CACHE_NO_READ
) {
860 /* Throw away the results of the first read, since it'll contain the
861 * result of the read that happened just before debugint was set. */
862 scans_add_read32(scans
, address
, false);
864 /* This scan contains the results of the read the caller requested, as
865 * well as an interrupt bit worth looking at. */
866 scans_add_read32(scans
, address
, false);
869 int retval
= scans_execute(scans
);
870 if (retval
!= ERROR_OK
) {
872 LOG_ERROR("JTAG execute failed.");
877 for (unsigned int i
= 0; i
< scans
->next_scan
; i
++) {
878 dbus_status_t status
= scans_get_u32(scans
, i
, DBUS_OP_START
,
881 case DBUS_STATUS_SUCCESS
:
883 case DBUS_STATUS_FAILED
:
884 LOG_ERROR("Debug RAM write failed. Hardware error?");
887 case DBUS_STATUS_BUSY
:
891 LOG_ERROR("Got invalid bus access status: %d", status
);
898 increase_dbus_busy_delay(target
);
900 /* Try again, using the slow careful code.
901 * Write all RAM, just to be extra cautious. */
902 for (unsigned int i
= 0; i
< info
->dramsize
; i
++) {
903 if (i
== last
&& run
)
904 dram_write32(target
, last
, info
->dram_cache
[last
].data
, true);
906 dram_write32(target
, i
, info
->dram_cache
[i
].data
, false);
907 info
->dram_cache
[i
].dirty
= false;
912 if (wait_for_debugint_clear(target
, true) != ERROR_OK
) {
913 LOG_ERROR("Debug interrupt didn't clear.");
914 dump_debug_ram(target
);
923 for (unsigned int i
= 0; i
< info
->dramsize
; i
++)
924 info
->dram_cache
[i
].dirty
= false;
927 if (run
|| address
< CACHE_NO_READ
) {
928 int interrupt
= scans_get_u32(scans
, scans
->next_scan
-1,
929 DBUS_DATA_START
+ 33, 1);
931 increase_interrupt_high_delay(target
);
932 /* Slow path wait for it to clear. */
933 if (wait_for_debugint_clear(target
, false) != ERROR_OK
) {
934 LOG_ERROR("Debug interrupt didn't clear.");
935 dump_debug_ram(target
);
940 /* We read a useful value in that last scan. */
941 unsigned int read_addr
= scans_get_u32(scans
, scans
->next_scan
-1,
942 DBUS_ADDRESS_START
, info
->addrbits
);
943 if (read_addr
!= address
) {
944 LOG_INFO("Got data from 0x%x but expected it from 0x%x",
947 info
->dram_cache
[read_addr
].data
=
948 scans_get_u32(scans
, scans
->next_scan
-1, DBUS_DATA_START
, 32);
949 info
->dram_cache
[read_addr
].valid
= true;
960 static uint32_t cache_get32(struct target
*target
, unsigned int address
)
962 riscv011_info_t
*info
= get_info(target
);
963 if (!info
->dram_cache
[address
].valid
) {
964 info
->dram_cache
[address
].data
= dram_read32(target
, address
);
965 info
->dram_cache
[address
].valid
= true;
967 return info
->dram_cache
[address
].data
;
970 static uint64_t cache_get(struct target
*target
, slot_t slot
)
972 unsigned int offset
= slot_offset(target
, slot
);
973 uint64_t value
= cache_get32(target
, offset
);
974 if (riscv_xlen(target
) > 32)
975 value
|= ((uint64_t) cache_get32(target
, offset
+ 1)) << 32;
979 /* Write instruction that jumps from the specified word in Debug RAM to resume
981 static void dram_write_jump(struct target
*target
, unsigned int index
,
984 dram_write32(target
, index
,
985 jal(0, (uint32_t) (DEBUG_ROM_RESUME
- (DEBUG_RAM_START
+ 4*index
))),
989 static int wait_for_state(struct target
*target
, enum target_state state
)
991 time_t start
= time(NULL
);
993 int result
= riscv011_poll(target
);
994 if (result
!= ERROR_OK
)
996 if (target
->state
== state
)
998 if (time(NULL
) - start
> riscv_command_timeout_sec
) {
999 LOG_ERROR("Timed out waiting for state %d. "
1000 "Increase timeout with riscv set_command_timeout_sec.", state
);
1006 static int read_csr(struct target
*target
, uint64_t *value
, uint32_t csr
)
1008 riscv011_info_t
*info
= get_info(target
);
1009 cache_set32(target
, 0, csrr(S0
, csr
));
1010 cache_set_store(target
, 1, S0
, SLOT0
);
1011 cache_set_jump(target
, 2);
1012 if (cache_write(target
, 4, true) != ERROR_OK
)
1014 *value
= cache_get(target
, SLOT0
);
1015 LOG_DEBUG("csr 0x%x = 0x%" PRIx64
, csr
, *value
);
1017 uint32_t exception
= cache_get32(target
, info
->dramsize
-1);
1019 LOG_WARNING("Got exception 0x%x when reading %s", exception
,
1020 gdb_regno_name(GDB_REGNO_CSR0
+ csr
));
1028 static int write_csr(struct target
*target
, uint32_t csr
, uint64_t value
)
1030 LOG_DEBUG("csr 0x%x <- 0x%" PRIx64
, csr
, value
);
1031 cache_set_load(target
, 0, S0
, SLOT0
);
1032 cache_set32(target
, 1, csrw(S0
, csr
));
1033 cache_set_jump(target
, 2);
1034 cache_set(target
, SLOT0
, value
);
1035 if (cache_write(target
, 4, true) != ERROR_OK
)
1041 static int write_gpr(struct target
*target
, unsigned int gpr
, uint64_t value
)
1043 cache_set_load(target
, 0, gpr
, SLOT0
);
1044 cache_set_jump(target
, 1);
1045 cache_set(target
, SLOT0
, value
);
1046 if (cache_write(target
, 4, true) != ERROR_OK
)
1051 static int maybe_read_tselect(struct target
*target
)
1053 riscv011_info_t
*info
= get_info(target
);
1055 if (info
->tselect_dirty
) {
1056 int result
= read_csr(target
, &info
->tselect
, CSR_TSELECT
);
1057 if (result
!= ERROR_OK
)
1059 info
->tselect_dirty
= false;
1065 static int maybe_write_tselect(struct target
*target
)
1067 riscv011_info_t
*info
= get_info(target
);
1069 if (!info
->tselect_dirty
) {
1070 int result
= write_csr(target
, CSR_TSELECT
, info
->tselect
);
1071 if (result
!= ERROR_OK
)
1073 info
->tselect_dirty
= true;
1079 static int execute_resume(struct target
*target
, bool step
)
1081 riscv011_info_t
*info
= get_info(target
);
1083 LOG_DEBUG("step=%d", step
);
1085 maybe_write_tselect(target
);
1087 /* TODO: check if dpc is dirty (which also is true if an exception was hit
1089 cache_set_load(target
, 0, S0
, SLOT0
);
1090 cache_set32(target
, 1, csrw(S0
, CSR_DPC
));
1091 cache_set_jump(target
, 2);
1092 cache_set(target
, SLOT0
, info
->dpc
);
1093 if (cache_write(target
, 4, true) != ERROR_OK
)
1096 struct reg
*mstatus_reg
= &target
->reg_cache
->reg_list
[GDB_REGNO_MSTATUS
];
1097 if (mstatus_reg
->valid
) {
1098 uint64_t mstatus_user
= buf_get_u64(mstatus_reg
->value
, 0, riscv_xlen(target
));
1099 if (mstatus_user
!= info
->mstatus_actual
) {
1100 cache_set_load(target
, 0, S0
, SLOT0
);
1101 cache_set32(target
, 1, csrw(S0
, CSR_MSTATUS
));
1102 cache_set_jump(target
, 2);
1103 cache_set(target
, SLOT0
, mstatus_user
);
1104 if (cache_write(target
, 4, true) != ERROR_OK
)
1109 info
->dcsr
|= DCSR_EBREAKM
| DCSR_EBREAKH
| DCSR_EBREAKS
| DCSR_EBREAKU
;
1110 info
->dcsr
&= ~DCSR_HALT
;
1113 info
->dcsr
|= DCSR_STEP
;
1115 info
->dcsr
&= ~DCSR_STEP
;
1117 dram_write32(target
, 0, lw(S0
, ZERO
, DEBUG_RAM_START
+ 16), false);
1118 dram_write32(target
, 1, csrw(S0
, CSR_DCSR
), false);
1119 dram_write32(target
, 2, fence_i(), false);
1120 dram_write_jump(target
, 3, false);
1122 /* Write DCSR value, set interrupt and clear haltnot. */
1123 uint64_t dbus_value
= DMCONTROL_INTERRUPT
| info
->dcsr
;
1124 dbus_write(target
, dram_address(4), dbus_value
);
1126 cache_invalidate(target
);
1128 if (wait_for_debugint_clear(target
, true) != ERROR_OK
) {
1129 LOG_ERROR("Debug interrupt didn't clear.");
1133 target
->state
= TARGET_RUNNING
;
1134 register_cache_invalidate(target
->reg_cache
);
1139 /* Execute a step, and wait for reentry into Debug Mode. */
1140 static int full_step(struct target
*target
, bool announce
)
1142 int result
= execute_resume(target
, true);
1143 if (result
!= ERROR_OK
)
1145 time_t start
= time(NULL
);
1147 result
= poll_target(target
, announce
);
1148 if (result
!= ERROR_OK
)
1150 if (target
->state
!= TARGET_DEBUG_RUNNING
)
1152 if (time(NULL
) - start
> riscv_command_timeout_sec
) {
1153 LOG_ERROR("Timed out waiting for step to complete."
1154 "Increase timeout with riscv set_command_timeout_sec");
1161 static int resume(struct target
*target
, int debug_execution
, bool step
)
1163 if (debug_execution
) {
1164 LOG_ERROR("TODO: debug_execution is true");
1168 return execute_resume(target
, step
);
1171 static uint64_t reg_cache_get(struct target
*target
, unsigned int number
)
1173 struct reg
*r
= &target
->reg_cache
->reg_list
[number
];
1175 LOG_ERROR("Register cache entry for %d is invalid!", number
);
1178 uint64_t value
= buf_get_u64(r
->value
, 0, r
->size
);
1179 LOG_DEBUG("%s = 0x%" PRIx64
, r
->name
, value
);
1183 static void reg_cache_set(struct target
*target
, unsigned int number
,
1186 struct reg
*r
= &target
->reg_cache
->reg_list
[number
];
1187 LOG_DEBUG("%s <= 0x%" PRIx64
, r
->name
, value
);
1189 buf_set_u64(r
->value
, 0, r
->size
, value
);
1192 static int update_mstatus_actual(struct target
*target
)
1194 struct reg
*mstatus_reg
= &target
->reg_cache
->reg_list
[GDB_REGNO_MSTATUS
];
1195 if (mstatus_reg
->valid
) {
1196 /* We previously made it valid. */
1200 /* Force reading the register. In that process mstatus_actual will be
1202 riscv_reg_t mstatus
;
1203 return get_register(target
, &mstatus
, 0, GDB_REGNO_MSTATUS
);
1206 /*** OpenOCD target functions. ***/
1208 static int register_read(struct target
*target
, riscv_reg_t
*value
, int regnum
)
1210 riscv011_info_t
*info
= get_info(target
);
1211 if (regnum
>= GDB_REGNO_CSR0
&& regnum
<= GDB_REGNO_CSR4095
) {
1212 cache_set32(target
, 0, csrr(S0
, regnum
- GDB_REGNO_CSR0
));
1213 cache_set_store(target
, 1, S0
, SLOT0
);
1214 cache_set_jump(target
, 2);
1216 LOG_ERROR("Don't know how to read register %d", regnum
);
1220 if (cache_write(target
, 4, true) != ERROR_OK
)
1223 uint32_t exception
= cache_get32(target
, info
->dramsize
-1);
1225 LOG_WARNING("Got exception 0x%x when reading %s", exception
, gdb_regno_name(regnum
));
1230 *value
= cache_get(target
, SLOT0
);
1231 LOG_DEBUG("reg[%d]=0x%" PRIx64
, regnum
, *value
);
1233 if (regnum
== GDB_REGNO_MSTATUS
)
1234 info
->mstatus_actual
= *value
;
1239 /* Write the register. No caching or games. */
1240 static int register_write(struct target
*target
, unsigned int number
,
1243 riscv011_info_t
*info
= get_info(target
);
1245 maybe_write_tselect(target
);
1248 cache_set_load(target
, 0, S0
, SLOT0
);
1249 cache_set32(target
, 1, csrw(S0
, CSR_DSCRATCH
));
1250 cache_set_jump(target
, 2);
1251 } else if (number
== S1
) {
1252 cache_set_load(target
, 0, S0
, SLOT0
);
1253 cache_set_store(target
, 1, S0
, SLOT_LAST
);
1254 cache_set_jump(target
, 2);
1255 } else if (number
<= GDB_REGNO_XPR31
) {
1256 cache_set_load(target
, 0, number
- GDB_REGNO_ZERO
, SLOT0
);
1257 cache_set_jump(target
, 1);
1258 } else if (number
== GDB_REGNO_PC
) {
1261 } else if (number
>= GDB_REGNO_FPR0
&& number
<= GDB_REGNO_FPR31
) {
1262 int result
= update_mstatus_actual(target
);
1263 if (result
!= ERROR_OK
)
1266 if ((info
->mstatus_actual
& MSTATUS_FS
) == 0) {
1267 info
->mstatus_actual
= set_field(info
->mstatus_actual
, MSTATUS_FS
, 1);
1268 cache_set_load(target
, i
++, S0
, SLOT1
);
1269 cache_set32(target
, i
++, csrw(S0
, CSR_MSTATUS
));
1270 cache_set(target
, SLOT1
, info
->mstatus_actual
);
1273 if (riscv_xlen(target
) == 32)
1274 cache_set32(target
, i
++, flw(number
- GDB_REGNO_FPR0
, 0, DEBUG_RAM_START
+ 16));
1276 cache_set32(target
, i
++, fld(number
- GDB_REGNO_FPR0
, 0, DEBUG_RAM_START
+ 16));
1277 cache_set_jump(target
, i
++);
1278 } else if (number
>= GDB_REGNO_CSR0
&& number
<= GDB_REGNO_CSR4095
) {
1279 cache_set_load(target
, 0, S0
, SLOT0
);
1280 cache_set32(target
, 1, csrw(S0
, number
- GDB_REGNO_CSR0
));
1281 cache_set_jump(target
, 2);
1283 if (number
== GDB_REGNO_MSTATUS
)
1284 info
->mstatus_actual
= value
;
1285 } else if (number
== GDB_REGNO_PRIV
) {
1286 info
->dcsr
= set_field(info
->dcsr
, DCSR_PRV
, value
);
1289 LOG_ERROR("Don't know how to write register %d", number
);
1293 cache_set(target
, SLOT0
, value
);
1294 if (cache_write(target
, info
->dramsize
- 1, true) != ERROR_OK
)
1297 uint32_t exception
= cache_get32(target
, info
->dramsize
-1);
1299 LOG_WARNING("Got exception 0x%x when writing %s", exception
,
1300 gdb_regno_name(number
));
1307 static int get_register(struct target
*target
, riscv_reg_t
*value
, int hartid
,
1310 assert(hartid
== 0);
1311 riscv011_info_t
*info
= get_info(target
);
1313 maybe_write_tselect(target
);
1315 if (regid
<= GDB_REGNO_XPR31
) {
1316 *value
= reg_cache_get(target
, regid
);
1317 } else if (regid
== GDB_REGNO_PC
) {
1319 } else if (regid
>= GDB_REGNO_FPR0
&& regid
<= GDB_REGNO_FPR31
) {
1320 int result
= update_mstatus_actual(target
);
1321 if (result
!= ERROR_OK
)
1324 if ((info
->mstatus_actual
& MSTATUS_FS
) == 0) {
1325 info
->mstatus_actual
= set_field(info
->mstatus_actual
, MSTATUS_FS
, 1);
1326 cache_set_load(target
, i
++, S0
, SLOT1
);
1327 cache_set32(target
, i
++, csrw(S0
, CSR_MSTATUS
));
1328 cache_set(target
, SLOT1
, info
->mstatus_actual
);
1331 if (riscv_xlen(target
) == 32)
1332 cache_set32(target
, i
++, fsw(regid
- GDB_REGNO_FPR0
, 0, DEBUG_RAM_START
+ 16));
1334 cache_set32(target
, i
++, fsd(regid
- GDB_REGNO_FPR0
, 0, DEBUG_RAM_START
+ 16));
1335 cache_set_jump(target
, i
++);
1337 if (cache_write(target
, 4, true) != ERROR_OK
)
1339 } else if (regid
== GDB_REGNO_PRIV
) {
1340 *value
= get_field(info
->dcsr
, DCSR_PRV
);
1342 int result
= register_read(target
, value
, regid
);
1343 if (result
!= ERROR_OK
)
1347 if (regid
== GDB_REGNO_MSTATUS
)
1348 target
->reg_cache
->reg_list
[regid
].valid
= true;
1353 static int set_register(struct target
*target
, int hartid
, int regid
,
1356 assert(hartid
== 0);
1357 return register_write(target
, regid
, value
);
1360 static int halt(struct target
*target
)
1362 LOG_DEBUG("riscv_halt()");
1363 jtag_add_ir_scan(target
->tap
, &select_dbus
, TAP_IDLE
);
1365 cache_set32(target
, 0, csrsi(CSR_DCSR
, DCSR_HALT
));
1366 cache_set32(target
, 1, csrr(S0
, CSR_MHARTID
));
1367 cache_set32(target
, 2, sw(S0
, ZERO
, SETHALTNOT
));
1368 cache_set_jump(target
, 3);
1370 if (cache_write(target
, 4, true) != ERROR_OK
) {
1371 LOG_ERROR("cache_write() failed.");
1378 static int init_target(struct command_context
*cmd_ctx
,
1379 struct target
*target
)
1382 riscv_info_t
*generic_info
= (riscv_info_t
*) target
->arch_info
;
1383 generic_info
->get_register
= get_register
;
1384 generic_info
->set_register
= set_register
;
1386 generic_info
->version_specific
= calloc(1, sizeof(riscv011_info_t
));
1387 if (!generic_info
->version_specific
)
1390 /* Assume 32-bit until we discover the real value in examine(). */
1391 generic_info
->xlen
[0] = 32;
1392 riscv_init_registers(target
);
1397 static void deinit_target(struct target
*target
)
1399 LOG_DEBUG("riscv_deinit_target()");
1400 riscv_info_t
*info
= (riscv_info_t
*) target
->arch_info
;
1401 free(info
->version_specific
);
1402 info
->version_specific
= NULL
;
1405 static int strict_step(struct target
*target
, bool announce
)
1407 riscv011_info_t
*info
= get_info(target
);
1411 struct breakpoint
*breakpoint
= target
->breakpoints
;
1412 while (breakpoint
) {
1413 riscv_remove_breakpoint(target
, breakpoint
);
1414 breakpoint
= breakpoint
->next
;
1417 struct watchpoint
*watchpoint
= target
->watchpoints
;
1418 while (watchpoint
) {
1419 riscv_remove_watchpoint(target
, watchpoint
);
1420 watchpoint
= watchpoint
->next
;
1423 int result
= full_step(target
, announce
);
1424 if (result
!= ERROR_OK
)
1427 breakpoint
= target
->breakpoints
;
1428 while (breakpoint
) {
1429 riscv_add_breakpoint(target
, breakpoint
);
1430 breakpoint
= breakpoint
->next
;
1433 watchpoint
= target
->watchpoints
;
1434 while (watchpoint
) {
1435 riscv_add_watchpoint(target
, watchpoint
);
1436 watchpoint
= watchpoint
->next
;
1439 info
->need_strict_step
= false;
1444 static int step(struct target
*target
, int current
, target_addr_t address
,
1445 int handle_breakpoints
)
1447 riscv011_info_t
*info
= get_info(target
);
1449 jtag_add_ir_scan(target
->tap
, &select_dbus
, TAP_IDLE
);
1452 if (riscv_xlen(target
) > 32) {
1453 LOG_WARNING("Asked to resume at 32-bit PC on %d-bit target.",
1454 riscv_xlen(target
));
1456 int result
= register_write(target
, GDB_REGNO_PC
, address
);
1457 if (result
!= ERROR_OK
)
1461 if (info
->need_strict_step
|| handle_breakpoints
) {
1462 int result
= strict_step(target
, true);
1463 if (result
!= ERROR_OK
)
1466 return resume(target
, 0, true);
1472 static int examine(struct target
*target
)
1474 /* Don't need to select dbus, since the first thing we do is read dtmcontrol. */
1476 uint32_t dtmcontrol
= dtmcontrol_scan(target
, 0);
1477 LOG_DEBUG("dtmcontrol=0x%x", dtmcontrol
);
1478 LOG_DEBUG(" addrbits=%d", get_field(dtmcontrol
, DTMCONTROL_ADDRBITS
));
1479 LOG_DEBUG(" version=%d", get_field(dtmcontrol
, DTMCONTROL_VERSION
));
1480 LOG_DEBUG(" idle=%d", get_field(dtmcontrol
, DTMCONTROL_IDLE
));
1481 if (dtmcontrol
== 0) {
1482 LOG_ERROR("dtmcontrol is 0. Check JTAG connectivity/board power.");
1485 if (get_field(dtmcontrol
, DTMCONTROL_VERSION
) != 0) {
1486 LOG_ERROR("Unsupported DTM version %d. (dtmcontrol=0x%x)",
1487 get_field(dtmcontrol
, DTMCONTROL_VERSION
), dtmcontrol
);
1494 riscv011_info_t
*info
= get_info(target
);
1495 info
->addrbits
= get_field(dtmcontrol
, DTMCONTROL_ADDRBITS
);
1496 info
->dtmcontrol_idle
= get_field(dtmcontrol
, DTMCONTROL_IDLE
);
1497 if (info
->dtmcontrol_idle
== 0) {
1498 /* Some old SiFive cores don't set idle but need it to be 1. */
1499 uint32_t idcode
= idcode_scan(target
);
1500 if (idcode
== 0x10e31913)
1501 info
->dtmcontrol_idle
= 1;
1504 uint32_t dminfo
= dbus_read(target
, DMINFO
);
1505 LOG_DEBUG("dminfo: 0x%08x", dminfo
);
1506 LOG_DEBUG(" abussize=0x%x", get_field(dminfo
, DMINFO_ABUSSIZE
));
1507 LOG_DEBUG(" serialcount=0x%x", get_field(dminfo
, DMINFO_SERIALCOUNT
));
1508 LOG_DEBUG(" access128=%d", get_field(dminfo
, DMINFO_ACCESS128
));
1509 LOG_DEBUG(" access64=%d", get_field(dminfo
, DMINFO_ACCESS64
));
1510 LOG_DEBUG(" access32=%d", get_field(dminfo
, DMINFO_ACCESS32
));
1511 LOG_DEBUG(" access16=%d", get_field(dminfo
, DMINFO_ACCESS16
));
1512 LOG_DEBUG(" access8=%d", get_field(dminfo
, DMINFO_ACCESS8
));
1513 LOG_DEBUG(" dramsize=0x%x", get_field(dminfo
, DMINFO_DRAMSIZE
));
1514 LOG_DEBUG(" authenticated=0x%x", get_field(dminfo
, DMINFO_AUTHENTICATED
));
1515 LOG_DEBUG(" authbusy=0x%x", get_field(dminfo
, DMINFO_AUTHBUSY
));
1516 LOG_DEBUG(" authtype=0x%x", get_field(dminfo
, DMINFO_AUTHTYPE
));
1517 LOG_DEBUG(" version=0x%x", get_field(dminfo
, DMINFO_VERSION
));
1519 if (get_field(dminfo
, DMINFO_VERSION
) != 1) {
1520 LOG_ERROR("OpenOCD only supports Debug Module version 1, not %d "
1521 "(dminfo=0x%x)", get_field(dminfo
, DMINFO_VERSION
), dminfo
);
1525 info
->dramsize
= get_field(dminfo
, DMINFO_DRAMSIZE
) + 1;
1527 if (get_field(dminfo
, DMINFO_AUTHTYPE
) != 0) {
1528 LOG_ERROR("Authentication required by RISC-V core but not "
1529 "supported by OpenOCD. dminfo=0x%x", dminfo
);
1533 /* Pretend this is a 32-bit system until we have found out the true value. */
1536 /* Figure out XLEN, and test writing all of Debug RAM while we're at it. */
1537 cache_set32(target
, 0, xori(S1
, ZERO
, -1));
1538 /* 0xffffffff 0xffffffff:ffffffff 0xffffffff:ffffffff:ffffffff:ffffffff */
1539 cache_set32(target
, 1, srli(S1
, S1
, 31));
1540 /* 0x00000001 0x00000001:ffffffff 0x00000001:ffffffff:ffffffff:ffffffff */
1541 cache_set32(target
, 2, sw(S1
, ZERO
, DEBUG_RAM_START
));
1542 cache_set32(target
, 3, srli(S1
, S1
, 31));
1543 /* 0x00000000 0x00000000:00000003 0x00000000:00000003:ffffffff:ffffffff */
1544 cache_set32(target
, 4, sw(S1
, ZERO
, DEBUG_RAM_START
+ 4));
1545 cache_set_jump(target
, 5);
1546 for (unsigned i
= 6; i
< info
->dramsize
; i
++)
1547 cache_set32(target
, i
, i
* 0x01020304);
1549 cache_write(target
, 0, false);
1551 /* Check that we can actually read/write dram. */
1552 if (cache_check(target
) != ERROR_OK
)
1555 cache_write(target
, 0, true);
1556 cache_invalidate(target
);
1558 uint32_t word0
= cache_get32(target
, 0);
1559 uint32_t word1
= cache_get32(target
, 1);
1560 riscv_info_t
*generic_info
= (riscv_info_t
*) target
->arch_info
;
1561 if (word0
== 1 && word1
== 0) {
1562 generic_info
->xlen
[0] = 32;
1563 } else if (word0
== 0xffffffff && word1
== 3) {
1564 generic_info
->xlen
[0] = 64;
1565 } else if (word0
== 0xffffffff && word1
== 0xffffffff) {
1566 generic_info
->xlen
[0] = 128;
1568 uint32_t exception
= cache_get32(target
, info
->dramsize
-1);
1569 LOG_ERROR("Failed to discover xlen; word0=0x%x, word1=0x%x, exception=0x%x",
1570 word0
, word1
, exception
);
1571 dump_debug_ram(target
);
1574 LOG_DEBUG("Discovered XLEN is %d", riscv_xlen(target
));
1576 if (read_csr(target
, &r
->misa
[0], CSR_MISA
) != ERROR_OK
) {
1577 const unsigned old_csr_misa
= 0xf10;
1578 LOG_WARNING("Failed to read misa at 0x%x; trying 0x%x.", CSR_MISA
,
1580 if (read_csr(target
, &r
->misa
[0], old_csr_misa
) != ERROR_OK
) {
1581 /* Maybe this is an old core that still has $misa at the old
1583 LOG_ERROR("Failed to read misa at 0x%x.", old_csr_misa
);
1588 /* Update register list to match discovered XLEN/supported extensions. */
1589 riscv_init_registers(target
);
1591 info
->never_halted
= true;
1593 int result
= riscv011_poll(target
);
1594 if (result
!= ERROR_OK
)
1597 target_set_examined(target
);
1598 riscv_set_current_hartid(target
, 0);
1599 for (size_t i
= 0; i
< 32; ++i
)
1600 reg_cache_set(target
, i
, -1);
1601 LOG_INFO("Examined RISCV core; XLEN=%d, misa=0x%" PRIx64
,
1602 riscv_xlen(target
), r
->misa
[0]);
1607 static riscv_error_t
handle_halt_routine(struct target
*target
)
1609 riscv011_info_t
*info
= get_info(target
);
1611 scans_t
*scans
= scans_new(target
, 256);
1613 /* Read all GPRs as fast as we can, because gdb is going to ask for them
1614 * anyway. Reading them one at a time is much slower. */
1616 /* Write the jump back to address 1. */
1617 scans_add_write_jump(scans
, 1, false);
1618 for (int reg
= 1; reg
< 32; reg
++) {
1619 if (reg
== S0
|| reg
== S1
)
1622 /* Write store instruction. */
1623 scans_add_write_store(scans
, 0, reg
, SLOT0
, true);
1626 scans_add_read(scans
, SLOT0
, false);
1629 /* Write store of s0 at index 1. */
1630 scans_add_write_store(scans
, 1, S0
, SLOT0
, false);
1631 /* Write jump at index 2. */
1632 scans_add_write_jump(scans
, 2, false);
1634 /* Read S1 from debug RAM */
1635 scans_add_write_load(scans
, 0, S0
, SLOT_LAST
, true);
1637 scans_add_read(scans
, SLOT0
, false);
1639 /* Read S0 from dscratch */
1640 unsigned int csr
[] = {CSR_DSCRATCH
, CSR_DPC
, CSR_DCSR
};
1641 for (unsigned int i
= 0; i
< DIM(csr
); i
++) {
1642 scans_add_write32(scans
, 0, csrr(S0
, csr
[i
]), true);
1643 scans_add_read(scans
, SLOT0
, false);
1646 /* Final read to get the last value out. */
1647 scans_add_read32(scans
, 4, false);
1649 int retval
= scans_execute(scans
);
1650 if (retval
!= ERROR_OK
) {
1651 LOG_ERROR("JTAG execute failed: %d", retval
);
1655 unsigned int dbus_busy
= 0;
1656 unsigned int interrupt_set
= 0;
1657 unsigned result
= 0;
1659 reg_cache_set(target
, 0, 0);
1660 /* The first scan result is the result from something old we don't care
1662 for (unsigned int i
= 1; i
< scans
->next_scan
&& dbus_busy
== 0; i
++) {
1663 dbus_status_t status
= scans_get_u32(scans
, i
, DBUS_OP_START
,
1665 uint64_t data
= scans_get_u64(scans
, i
, DBUS_DATA_START
, DBUS_DATA_SIZE
);
1666 uint32_t address
= scans_get_u32(scans
, i
, DBUS_ADDRESS_START
,
1669 case DBUS_STATUS_SUCCESS
:
1671 case DBUS_STATUS_FAILED
:
1672 LOG_ERROR("Debug access failed. Hardware error?");
1674 case DBUS_STATUS_BUSY
:
1678 LOG_ERROR("Got invalid bus access status: %d", status
);
1681 if (data
& DMCONTROL_INTERRUPT
) {
1685 if (address
== 4 || address
== 5) {
1792 if (riscv_xlen(target
) == 32) {
1793 reg_cache_set(target
, reg
, data
& 0xffffffff);
1795 } else if (riscv_xlen(target
) == 64) {
1797 value
= data
& 0xffffffff;
1798 } else if (address
== 5) {
1799 reg_cache_set(target
, reg
, ((data
& 0xffffffff) << 32) | value
);
1808 increase_dbus_busy_delay(target
);
1811 if (interrupt_set
) {
1812 increase_interrupt_high_delay(target
);
1816 /* TODO: get rid of those 2 variables and talk to the cache directly. */
1817 info
->dpc
= reg_cache_get(target
, CSR_DPC
);
1818 info
->dcsr
= reg_cache_get(target
, CSR_DCSR
);
1820 scans_delete(scans
);
1822 cache_invalidate(target
);
1827 scans_delete(scans
);
1831 static int handle_halt(struct target
*target
, bool announce
)
1833 riscv011_info_t
*info
= get_info(target
);
1834 target
->state
= TARGET_HALTED
;
1838 re
= handle_halt_routine(target
);
1839 } while (re
== RE_AGAIN
);
1841 LOG_ERROR("handle_halt_routine failed");
1845 int cause
= get_field(info
->dcsr
, DCSR_CAUSE
);
1847 case DCSR_CAUSE_SWBP
:
1848 target
->debug_reason
= DBG_REASON_BREAKPOINT
;
1850 case DCSR_CAUSE_HWBP
:
1851 target
->debug_reason
= DBG_REASON_WPTANDBKPT
;
1852 /* If we halted because of a data trigger, gdb doesn't know to do
1853 * the disable-breakpoints-step-enable-breakpoints dance. */
1854 info
->need_strict_step
= true;
1856 case DCSR_CAUSE_DEBUGINT
:
1857 target
->debug_reason
= DBG_REASON_DBGRQ
;
1859 case DCSR_CAUSE_STEP
:
1860 target
->debug_reason
= DBG_REASON_SINGLESTEP
;
1862 case DCSR_CAUSE_HALT
:
1864 LOG_ERROR("Invalid halt cause %d in DCSR (0x%" PRIx64
")",
1868 if (info
->never_halted
) {
1869 info
->never_halted
= false;
1871 int result
= maybe_read_tselect(target
);
1872 if (result
!= ERROR_OK
)
1874 riscv_enumerate_triggers(target
);
1877 if (target
->debug_reason
== DBG_REASON_BREAKPOINT
) {
1879 if (riscv_semihosting(target
, &retval
) != 0)
1884 target_call_event_callbacks(target
, TARGET_EVENT_HALTED
);
1886 const char *cause_string
[] = {
1888 "software breakpoint",
1894 /* This is logged to the user so that gdb will show it when a user types
1895 * 'monitor reset init'. At that time gdb appears to have the pc cached
1896 * still so if a user manually inspects the pc it will still have the old
1898 LOG_USER("halted at 0x%" PRIx64
" due to %s", info
->dpc
, cause_string
[cause
]);
1903 static int poll_target(struct target
*target
, bool announce
)
1905 jtag_add_ir_scan(target
->tap
, &select_dbus
, TAP_IDLE
);
1907 /* Inhibit debug logging during poll(), which isn't usually interesting and
1908 * just fills up the screen/logs with clutter. */
1909 int old_debug_level
= debug_level
;
1910 if (debug_level
>= LOG_LVL_DEBUG
)
1911 debug_level
= LOG_LVL_INFO
;
1912 bits_t bits
= read_bits(target
);
1913 debug_level
= old_debug_level
;
1915 if (bits
.haltnot
&& bits
.interrupt
) {
1916 target
->state
= TARGET_DEBUG_RUNNING
;
1917 LOG_DEBUG("debug running");
1918 } else if (bits
.haltnot
&& !bits
.interrupt
) {
1919 if (target
->state
!= TARGET_HALTED
)
1920 return handle_halt(target
, announce
);
1921 } else if (!bits
.haltnot
&& bits
.interrupt
) {
1922 /* Target is halting. There is no state for that, so don't change anything. */
1923 LOG_DEBUG("halting");
1924 } else if (!bits
.haltnot
&& !bits
.interrupt
) {
1925 target
->state
= TARGET_RUNNING
;
1931 static int riscv011_poll(struct target
*target
)
1933 return poll_target(target
, true);
1936 static int riscv011_resume(struct target
*target
, int current
,
1937 target_addr_t address
, int handle_breakpoints
, int debug_execution
)
1939 riscv011_info_t
*info
= get_info(target
);
1941 jtag_add_ir_scan(target
->tap
, &select_dbus
, TAP_IDLE
);
1944 if (riscv_xlen(target
) > 32) {
1945 LOG_WARNING("Asked to resume at 32-bit PC on %d-bit target.",
1946 riscv_xlen(target
));
1948 int result
= register_write(target
, GDB_REGNO_PC
, address
);
1949 if (result
!= ERROR_OK
)
1953 if (info
->need_strict_step
|| handle_breakpoints
) {
1954 int result
= strict_step(target
, false);
1955 if (result
!= ERROR_OK
)
1959 return resume(target
, debug_execution
, false);
1962 static int assert_reset(struct target
*target
)
1964 riscv011_info_t
*info
= get_info(target
);
1965 /* TODO: Maybe what I implemented here is more like soft_reset_halt()? */
1967 jtag_add_ir_scan(target
->tap
, &select_dbus
, TAP_IDLE
);
1969 /* The only assumption we can make is that the TAP was reset. */
1970 if (wait_for_debugint_clear(target
, true) != ERROR_OK
) {
1971 LOG_ERROR("Debug interrupt didn't clear.");
1975 /* Not sure what we should do when there are multiple cores.
1976 * Here just reset the single hart we're talking to. */
1977 info
->dcsr
|= DCSR_EBREAKM
| DCSR_EBREAKH
| DCSR_EBREAKS
|
1978 DCSR_EBREAKU
| DCSR_HALT
;
1979 if (target
->reset_halt
)
1980 info
->dcsr
|= DCSR_NDRESET
;
1982 info
->dcsr
|= DCSR_FULLRESET
;
1983 dram_write32(target
, 0, lw(S0
, ZERO
, DEBUG_RAM_START
+ 16), false);
1984 dram_write32(target
, 1, csrw(S0
, CSR_DCSR
), false);
1985 /* We shouldn't actually need the jump because a reset should happen. */
1986 dram_write_jump(target
, 2, false);
1987 dram_write32(target
, 4, info
->dcsr
, true);
1988 cache_invalidate(target
);
1990 target
->state
= TARGET_RESET
;
1995 static int deassert_reset(struct target
*target
)
1997 jtag_add_ir_scan(target
->tap
, &select_dbus
, TAP_IDLE
);
1998 if (target
->reset_halt
)
1999 return wait_for_state(target
, TARGET_HALTED
);
2001 return wait_for_state(target
, TARGET_RUNNING
);
2004 static int read_memory(struct target
*target
, target_addr_t address
,
2005 uint32_t size
, uint32_t count
, uint8_t *buffer
)
2007 jtag_add_ir_scan(target
->tap
, &select_dbus
, TAP_IDLE
);
2009 cache_set32(target
, 0, lw(S0
, ZERO
, DEBUG_RAM_START
+ 16));
2012 cache_set32(target
, 1, lb(S1
, S0
, 0));
2013 cache_set32(target
, 2, sw(S1
, ZERO
, DEBUG_RAM_START
+ 16));
2016 cache_set32(target
, 1, lh(S1
, S0
, 0));
2017 cache_set32(target
, 2, sw(S1
, ZERO
, DEBUG_RAM_START
+ 16));
2020 cache_set32(target
, 1, lw(S1
, S0
, 0));
2021 cache_set32(target
, 2, sw(S1
, ZERO
, DEBUG_RAM_START
+ 16));
2024 LOG_ERROR("Unsupported size: %d", size
);
2027 cache_set_jump(target
, 3);
2028 cache_write(target
, CACHE_NO_READ
, false);
2030 riscv011_info_t
*info
= get_info(target
);
2031 const unsigned max_batch_size
= 256;
2032 scans_t
*scans
= scans_new(target
, max_batch_size
);
2034 uint32_t result_value
= 0x777;
2036 while (i
< count
+ 3) {
2037 unsigned int batch_size
= MIN(count
+ 3 - i
, max_batch_size
);
2040 for (unsigned int j
= 0; j
< batch_size
; j
++) {
2041 if (i
+ j
== count
) {
2042 /* Just insert a read so we can scan out the last value. */
2043 scans_add_read32(scans
, 4, false);
2044 } else if (i
+ j
>= count
+ 1) {
2045 /* And check for errors. */
2046 scans_add_read32(scans
, info
->dramsize
-1, false);
2048 /* Write the next address and set interrupt. */
2049 uint32_t offset
= size
* (i
+ j
);
2050 scans_add_write32(scans
, 4, address
+ offset
, true);
2054 int retval
= scans_execute(scans
);
2055 if (retval
!= ERROR_OK
) {
2056 LOG_ERROR("JTAG execute failed: %d", retval
);
2061 int execute_busy
= 0;
2062 for (unsigned int j
= 0; j
< batch_size
; j
++) {
2063 dbus_status_t status
= scans_get_u32(scans
, j
, DBUS_OP_START
,
2066 case DBUS_STATUS_SUCCESS
:
2068 case DBUS_STATUS_FAILED
:
2069 LOG_ERROR("Debug RAM write failed. Hardware error?");
2071 case DBUS_STATUS_BUSY
:
2075 LOG_ERROR("Got invalid bus access status: %d", status
);
2078 uint64_t data
= scans_get_u64(scans
, j
, DBUS_DATA_START
,
2080 if (data
& DMCONTROL_INTERRUPT
)
2082 if (i
+ j
== count
+ 2) {
2083 result_value
= data
;
2084 } else if (i
+ j
> 1) {
2085 uint32_t offset
= size
* (i
+ j
- 2);
2088 buffer
[offset
] = data
;
2091 buffer
[offset
] = data
;
2092 buffer
[offset
+1] = data
>> 8;
2095 buffer
[offset
] = data
;
2096 buffer
[offset
+1] = data
>> 8;
2097 buffer
[offset
+2] = data
>> 16;
2098 buffer
[offset
+3] = data
>> 24;
2102 LOG_DEBUG("j=%d status=%d data=%09" PRIx64
, j
, status
, data
);
2105 increase_dbus_busy_delay(target
);
2107 increase_interrupt_high_delay(target
);
2108 if (dbus_busy
|| execute_busy
) {
2109 wait_for_debugint_clear(target
, false);
2112 LOG_INFO("Retrying memory read starting from 0x%" TARGET_PRIxADDR
2113 " with more delays", address
+ size
* i
);
2119 if (result_value
!= 0) {
2120 LOG_USER("Core got an exception (0x%x) while reading from 0x%"
2121 TARGET_PRIxADDR
, result_value
, address
+ size
* (count
-1));
2123 LOG_USER("(It may have failed between 0x%" TARGET_PRIxADDR
2124 " and 0x%" TARGET_PRIxADDR
" as well, but we "
2125 "didn't check then.)",
2126 address
, address
+ size
* (count
-2) + size
- 1);
2131 scans_delete(scans
);
2132 cache_clean(target
);
2136 scans_delete(scans
);
2137 cache_clean(target
);
2141 static int setup_write_memory(struct target
*target
, uint32_t size
)
2145 cache_set32(target
, 0, lb(S0
, ZERO
, DEBUG_RAM_START
+ 16));
2146 cache_set32(target
, 1, sb(S0
, T0
, 0));
2149 cache_set32(target
, 0, lh(S0
, ZERO
, DEBUG_RAM_START
+ 16));
2150 cache_set32(target
, 1, sh(S0
, T0
, 0));
2153 cache_set32(target
, 0, lw(S0
, ZERO
, DEBUG_RAM_START
+ 16));
2154 cache_set32(target
, 1, sw(S0
, T0
, 0));
2157 LOG_ERROR("Unsupported size: %d", size
);
2160 cache_set32(target
, 2, addi(T0
, T0
, size
));
2161 cache_set_jump(target
, 3);
2162 cache_write(target
, 4, false);
2167 static int write_memory(struct target
*target
, target_addr_t address
,
2168 uint32_t size
, uint32_t count
, const uint8_t *buffer
)
2170 riscv011_info_t
*info
= get_info(target
);
2171 jtag_add_ir_scan(target
->tap
, &select_dbus
, TAP_IDLE
);
2173 /* Set up the address. */
2174 cache_set_store(target
, 0, T0
, SLOT1
);
2175 cache_set_load(target
, 1, T0
, SLOT0
);
2176 cache_set_jump(target
, 2);
2177 cache_set(target
, SLOT0
, address
);
2178 if (cache_write(target
, 5, true) != ERROR_OK
)
2181 uint64_t t0
= cache_get(target
, SLOT1
);
2182 LOG_DEBUG("t0 is 0x%" PRIx64
, t0
);
2184 if (setup_write_memory(target
, size
) != ERROR_OK
)
2187 const unsigned max_batch_size
= 256;
2188 scans_t
*scans
= scans_new(target
, max_batch_size
);
2190 uint32_t result_value
= 0x777;
2192 while (i
< count
+ 2) {
2193 unsigned int batch_size
= MIN(count
+ 2 - i
, max_batch_size
);
2196 for (unsigned int j
= 0; j
< batch_size
; j
++) {
2197 if (i
+ j
>= count
) {
2198 /* Check for an exception. */
2199 scans_add_read32(scans
, info
->dramsize
-1, false);
2201 /* Write the next value and set interrupt. */
2203 uint32_t offset
= size
* (i
+ j
);
2206 value
= buffer
[offset
];
2209 value
= buffer
[offset
] |
2210 (buffer
[offset
+1] << 8);
2213 value
= buffer
[offset
] |
2214 ((uint32_t) buffer
[offset
+1] << 8) |
2215 ((uint32_t) buffer
[offset
+2] << 16) |
2216 ((uint32_t) buffer
[offset
+3] << 24);
2222 scans_add_write32(scans
, 4, value
, true);
2226 int retval
= scans_execute(scans
);
2227 if (retval
!= ERROR_OK
) {
2228 LOG_ERROR("JTAG execute failed: %d", retval
);
2233 int execute_busy
= 0;
2234 for (unsigned int j
= 0; j
< batch_size
; j
++) {
2235 dbus_status_t status
= scans_get_u32(scans
, j
, DBUS_OP_START
,
2238 case DBUS_STATUS_SUCCESS
:
2240 case DBUS_STATUS_FAILED
:
2241 LOG_ERROR("Debug RAM write failed. Hardware error?");
2243 case DBUS_STATUS_BUSY
:
2247 LOG_ERROR("Got invalid bus access status: %d", status
);
2250 int interrupt
= scans_get_u32(scans
, j
, DBUS_DATA_START
+ 33, 1);
2253 if (i
+ j
== count
+ 1)
2254 result_value
= scans_get_u32(scans
, j
, DBUS_DATA_START
, 32);
2257 increase_dbus_busy_delay(target
);
2259 increase_interrupt_high_delay(target
);
2260 if (dbus_busy
|| execute_busy
) {
2261 wait_for_debugint_clear(target
, false);
2264 * Set t0 back to what it should have been at the beginning of this
2266 LOG_INFO("Retrying memory write starting from 0x%" TARGET_PRIxADDR
2267 " with more delays", address
+ size
* i
);
2269 cache_clean(target
);
2271 if (write_gpr(target
, T0
, address
+ size
* i
) != ERROR_OK
)
2274 if (setup_write_memory(target
, size
) != ERROR_OK
)
2281 if (result_value
!= 0) {
2282 LOG_ERROR("Core got an exception (0x%x) while writing to 0x%"
2283 TARGET_PRIxADDR
, result_value
, address
+ size
* (count
-1));
2285 LOG_ERROR("(It may have failed between 0x%" TARGET_PRIxADDR
2286 " and 0x%" TARGET_PRIxADDR
" as well, but we "
2287 "didn't check then.)",
2288 address
, address
+ size
* (count
-2) + size
- 1);
2293 scans_delete(scans
);
2294 cache_clean(target
);
2295 return register_write(target
, T0
, t0
);
2298 scans_delete(scans
);
2299 cache_clean(target
);
2303 static int arch_state(struct target
*target
)
2308 struct target_type riscv011_target
= {
2311 .init_target
= init_target
,
2312 .deinit_target
= deinit_target
,
2315 /* poll current target status */
2316 .poll
= riscv011_poll
,
2319 .resume
= riscv011_resume
,
2322 .assert_reset
= assert_reset
,
2323 .deassert_reset
= deassert_reset
,
2325 .read_memory
= read_memory
,
2326 .write_memory
= write_memory
,
2328 .arch_state
= arch_state
,
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)