1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2006 by Magnus Lundin *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
25 * Cortex-M3(tm) TRM, ARM DDI 0337E (r1p1) and 0337G (r2p0) *
27 ***************************************************************************/
32 #include "jtag/interface.h"
33 #include "breakpoints.h"
35 #include "target_request.h"
36 #include "target_type.h"
37 #include "arm_disassembler.h"
39 #include "arm_opcodes.h"
40 #include "arm_semihosting.h"
41 #include <helper/time_support.h>
43 /* NOTE: most of this should work fine for the Cortex-M1 and
44 * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M.
45 * Some differences: M0/M1 doesn't have FPB remapping or the
46 * DWT tracing/profiling support. (So the cycle counter will
47 * not be usable; the other stuff isn't currently used here.)
49 * Although there are some workarounds for errata seen only in r0p0
50 * silicon, such old parts are hard to find and thus not much tested
54 /* forward declarations */
55 static int cortex_m_store_core_reg_u32(struct target
*target
,
56 uint32_t num
, uint32_t value
);
57 static void cortex_m_dwt_free(struct target
*target
);
59 static int cortexm_dap_read_coreregister_u32(struct target
*target
,
60 uint32_t *value
, int regnum
)
62 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
66 /* because the DCB_DCRDR is used for the emulated dcc channel
67 * we have to save/restore the DCB_DCRDR when used */
68 if (target
->dbg_msg_enabled
) {
69 retval
= mem_ap_read_u32(armv7m
->debug_ap
, DCB_DCRDR
, &dcrdr
);
70 if (retval
!= ERROR_OK
)
74 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DCRSR
, regnum
);
75 if (retval
!= ERROR_OK
)
78 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DCRDR
, value
);
79 if (retval
!= ERROR_OK
)
82 if (target
->dbg_msg_enabled
) {
83 /* restore DCB_DCRDR - this needs to be in a separate
84 * transaction otherwise the emulated DCC channel breaks */
85 if (retval
== ERROR_OK
)
86 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DCRDR
, dcrdr
);
92 static int cortexm_dap_write_coreregister_u32(struct target
*target
,
93 uint32_t value
, int regnum
)
95 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
99 /* because the DCB_DCRDR is used for the emulated dcc channel
100 * we have to save/restore the DCB_DCRDR when used */
101 if (target
->dbg_msg_enabled
) {
102 retval
= mem_ap_read_u32(armv7m
->debug_ap
, DCB_DCRDR
, &dcrdr
);
103 if (retval
!= ERROR_OK
)
107 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DCRDR
, value
);
108 if (retval
!= ERROR_OK
)
111 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DCRSR
, regnum
| DCRSR_WnR
);
112 if (retval
!= ERROR_OK
)
115 if (target
->dbg_msg_enabled
) {
116 /* restore DCB_DCRDR - this needs to be in a seperate
117 * transaction otherwise the emulated DCC channel breaks */
118 if (retval
== ERROR_OK
)
119 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DCRDR
, dcrdr
);
125 static int cortex_m_write_debug_halt_mask(struct target
*target
,
126 uint32_t mask_on
, uint32_t mask_off
)
128 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
129 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
131 /* mask off status bits */
132 cortex_m
->dcb_dhcsr
&= ~((0xFFFF << 16) | mask_off
);
133 /* create new register mask */
134 cortex_m
->dcb_dhcsr
|= DBGKEY
| C_DEBUGEN
| mask_on
;
136 return mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, cortex_m
->dcb_dhcsr
);
139 static int cortex_m_clear_halt(struct target
*target
)
141 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
142 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
145 /* clear step if any */
146 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_STEP
);
148 /* Read Debug Fault Status Register */
149 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, NVIC_DFSR
, &cortex_m
->nvic_dfsr
);
150 if (retval
!= ERROR_OK
)
153 /* Clear Debug Fault Status */
154 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, NVIC_DFSR
, cortex_m
->nvic_dfsr
);
155 if (retval
!= ERROR_OK
)
157 LOG_DEBUG(" NVIC_DFSR 0x%" PRIx32
"", cortex_m
->nvic_dfsr
);
162 static int cortex_m_single_step_core(struct target
*target
)
164 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
165 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
168 /* Mask interrupts before clearing halt, if not done already. This avoids
169 * Erratum 377497 (fixed in r1p0) where setting MASKINTS while clearing
170 * HALT can put the core into an unknown state.
172 if (!(cortex_m
->dcb_dhcsr
& C_MASKINTS
)) {
173 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
,
174 DBGKEY
| C_MASKINTS
| C_HALT
| C_DEBUGEN
);
175 if (retval
!= ERROR_OK
)
178 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
,
179 DBGKEY
| C_MASKINTS
| C_STEP
| C_DEBUGEN
);
180 if (retval
!= ERROR_OK
)
184 /* restore dhcsr reg */
185 cortex_m_clear_halt(target
);
190 static int cortex_m_enable_fpb(struct target
*target
)
192 int retval
= target_write_u32(target
, FP_CTRL
, 3);
193 if (retval
!= ERROR_OK
)
196 /* check the fpb is actually enabled */
198 retval
= target_read_u32(target
, FP_CTRL
, &fpctrl
);
199 if (retval
!= ERROR_OK
)
208 static int cortex_m_endreset_event(struct target
*target
)
213 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
214 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
215 struct adiv5_dap
*swjdp
= cortex_m
->armv7m
.arm
.dap
;
216 struct cortex_m_fp_comparator
*fp_list
= cortex_m
->fp_comparator_list
;
217 struct cortex_m_dwt_comparator
*dwt_list
= cortex_m
->dwt_comparator_list
;
219 /* REVISIT The four debug monitor bits are currently ignored... */
220 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DEMCR
, &dcb_demcr
);
221 if (retval
!= ERROR_OK
)
223 LOG_DEBUG("DCB_DEMCR = 0x%8.8" PRIx32
"", dcb_demcr
);
225 /* this register is used for emulated dcc channel */
226 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DCRDR
, 0);
227 if (retval
!= ERROR_OK
)
230 /* Enable debug requests */
231 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
232 if (retval
!= ERROR_OK
)
234 if (!(cortex_m
->dcb_dhcsr
& C_DEBUGEN
)) {
235 retval
= cortex_m_write_debug_halt_mask(target
, 0, C_HALT
| C_STEP
| C_MASKINTS
);
236 if (retval
!= ERROR_OK
)
240 /* Restore proper interrupt masking setting. */
241 if (cortex_m
->isrmasking_mode
== CORTEX_M_ISRMASK_ON
)
242 cortex_m_write_debug_halt_mask(target
, C_MASKINTS
, 0);
244 cortex_m_write_debug_halt_mask(target
, 0, C_MASKINTS
);
246 /* Enable features controlled by ITM and DWT blocks, and catch only
247 * the vectors we were told to pay attention to.
249 * Target firmware is responsible for all fault handling policy
250 * choices *EXCEPT* explicitly scripted overrides like "vector_catch"
251 * or manual updates to the NVIC SHCSR and CCR registers.
253 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DEMCR
, TRCENA
| armv7m
->demcr
);
254 if (retval
!= ERROR_OK
)
257 /* Paranoia: evidently some (early?) chips don't preserve all the
258 * debug state (including FPB, DWT, etc) across reset...
262 retval
= cortex_m_enable_fpb(target
);
263 if (retval
!= ERROR_OK
) {
264 LOG_ERROR("Failed to enable the FPB");
268 cortex_m
->fpb_enabled
= true;
270 /* Restore FPB registers */
271 for (i
= 0; i
< cortex_m
->fp_num_code
+ cortex_m
->fp_num_lit
; i
++) {
272 retval
= target_write_u32(target
, fp_list
[i
].fpcr_address
, fp_list
[i
].fpcr_value
);
273 if (retval
!= ERROR_OK
)
277 /* Restore DWT registers */
278 for (i
= 0; i
< cortex_m
->dwt_num_comp
; i
++) {
279 retval
= target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 0,
281 if (retval
!= ERROR_OK
)
283 retval
= target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 4,
285 if (retval
!= ERROR_OK
)
287 retval
= target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 8,
288 dwt_list
[i
].function
);
289 if (retval
!= ERROR_OK
)
292 retval
= dap_run(swjdp
);
293 if (retval
!= ERROR_OK
)
296 register_cache_invalidate(armv7m
->arm
.core_cache
);
298 /* make sure we have latest dhcsr flags */
299 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
304 static int cortex_m_examine_debug_reason(struct target
*target
)
306 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
308 /* THIS IS NOT GOOD, TODO - better logic for detection of debug state reason
309 * only check the debug reason if we don't know it already */
311 if ((target
->debug_reason
!= DBG_REASON_DBGRQ
)
312 && (target
->debug_reason
!= DBG_REASON_SINGLESTEP
)) {
313 if (cortex_m
->nvic_dfsr
& DFSR_BKPT
) {
314 target
->debug_reason
= DBG_REASON_BREAKPOINT
;
315 if (cortex_m
->nvic_dfsr
& DFSR_DWTTRAP
)
316 target
->debug_reason
= DBG_REASON_WPTANDBKPT
;
317 } else if (cortex_m
->nvic_dfsr
& DFSR_DWTTRAP
)
318 target
->debug_reason
= DBG_REASON_WATCHPOINT
;
319 else if (cortex_m
->nvic_dfsr
& DFSR_VCATCH
)
320 target
->debug_reason
= DBG_REASON_BREAKPOINT
;
321 else /* EXTERNAL, HALTED */
322 target
->debug_reason
= DBG_REASON_UNDEFINED
;
328 static int cortex_m_examine_exception_reason(struct target
*target
)
330 uint32_t shcsr
= 0, except_sr
= 0, cfsr
= -1, except_ar
= -1;
331 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
332 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
335 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_SHCSR
, &shcsr
);
336 if (retval
!= ERROR_OK
)
338 switch (armv7m
->exception_number
) {
341 case 3: /* Hard Fault */
342 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, NVIC_HFSR
, &except_sr
);
343 if (retval
!= ERROR_OK
)
345 if (except_sr
& 0x40000000) {
346 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_CFSR
, &cfsr
);
347 if (retval
!= ERROR_OK
)
351 case 4: /* Memory Management */
352 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_CFSR
, &except_sr
);
353 if (retval
!= ERROR_OK
)
355 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_MMFAR
, &except_ar
);
356 if (retval
!= ERROR_OK
)
359 case 5: /* Bus Fault */
360 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_CFSR
, &except_sr
);
361 if (retval
!= ERROR_OK
)
363 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_BFAR
, &except_ar
);
364 if (retval
!= ERROR_OK
)
367 case 6: /* Usage Fault */
368 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_CFSR
, &except_sr
);
369 if (retval
!= ERROR_OK
)
372 case 11: /* SVCall */
374 case 12: /* Debug Monitor */
375 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_DFSR
, &except_sr
);
376 if (retval
!= ERROR_OK
)
379 case 14: /* PendSV */
381 case 15: /* SysTick */
387 retval
= dap_run(swjdp
);
388 if (retval
== ERROR_OK
)
389 LOG_DEBUG("%s SHCSR 0x%" PRIx32
", SR 0x%" PRIx32
390 ", CFSR 0x%" PRIx32
", AR 0x%" PRIx32
,
391 armv7m_exception_string(armv7m
->exception_number
),
392 shcsr
, except_sr
, cfsr
, except_ar
);
396 static int cortex_m_debug_entry(struct target
*target
)
401 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
402 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
403 struct arm
*arm
= &armv7m
->arm
;
408 cortex_m_clear_halt(target
);
409 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
410 if (retval
!= ERROR_OK
)
413 retval
= armv7m
->examine_debug_reason(target
);
414 if (retval
!= ERROR_OK
)
417 /* Examine target state and mode
418 * First load register accessible through core debug port */
419 int num_regs
= arm
->core_cache
->num_regs
;
421 for (i
= 0; i
< num_regs
; i
++) {
422 r
= &armv7m
->arm
.core_cache
->reg_list
[i
];
424 arm
->read_core_reg(target
, r
, i
, ARM_MODE_ANY
);
428 xPSR
= buf_get_u32(r
->value
, 0, 32);
430 /* For IT instructions xPSR must be reloaded on resume and clear on debug exec */
433 cortex_m_store_core_reg_u32(target
, 16, xPSR
& ~0xff);
436 /* Are we in an exception handler */
438 armv7m
->exception_number
= (xPSR
& 0x1FF);
440 arm
->core_mode
= ARM_MODE_HANDLER
;
441 arm
->map
= armv7m_msp_reg_map
;
443 unsigned control
= buf_get_u32(arm
->core_cache
444 ->reg_list
[ARMV7M_CONTROL
].value
, 0, 2);
446 /* is this thread privileged? */
447 arm
->core_mode
= control
& 1
448 ? ARM_MODE_USER_THREAD
451 /* which stack is it using? */
453 arm
->map
= armv7m_psp_reg_map
;
455 arm
->map
= armv7m_msp_reg_map
;
457 armv7m
->exception_number
= 0;
460 if (armv7m
->exception_number
)
461 cortex_m_examine_exception_reason(target
);
463 LOG_DEBUG("entered debug state in core mode: %s at PC 0x%" PRIx32
", target->state: %s",
464 arm_mode_name(arm
->core_mode
),
465 buf_get_u32(arm
->pc
->value
, 0, 32),
466 target_state_name(target
));
468 if (armv7m
->post_debug_entry
) {
469 retval
= armv7m
->post_debug_entry(target
);
470 if (retval
!= ERROR_OK
)
477 static int cortex_m_poll(struct target
*target
)
479 int detected_failure
= ERROR_OK
;
480 int retval
= ERROR_OK
;
481 enum target_state prev_target_state
= target
->state
;
482 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
483 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
485 /* Read from Debug Halting Control and Status Register */
486 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
487 if (retval
!= ERROR_OK
) {
488 target
->state
= TARGET_UNKNOWN
;
492 /* Recover from lockup. See ARMv7-M architecture spec,
493 * section B1.5.15 "Unrecoverable exception cases".
495 if (cortex_m
->dcb_dhcsr
& S_LOCKUP
) {
496 LOG_ERROR("%s -- clearing lockup after double fault",
497 target_name(target
));
498 cortex_m_write_debug_halt_mask(target
, C_HALT
, 0);
499 target
->debug_reason
= DBG_REASON_DBGRQ
;
501 /* We have to execute the rest (the "finally" equivalent, but
502 * still throw this exception again).
504 detected_failure
= ERROR_FAIL
;
506 /* refresh status bits */
507 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
508 if (retval
!= ERROR_OK
)
512 if (cortex_m
->dcb_dhcsr
& S_RESET_ST
) {
513 if (target
->state
!= TARGET_RESET
) {
514 target
->state
= TARGET_RESET
;
515 LOG_INFO("%s: external reset detected", target_name(target
));
520 if (target
->state
== TARGET_RESET
) {
521 /* Cannot switch context while running so endreset is
522 * called with target->state == TARGET_RESET
524 LOG_DEBUG("Exit from reset with dcb_dhcsr 0x%" PRIx32
,
525 cortex_m
->dcb_dhcsr
);
526 retval
= cortex_m_endreset_event(target
);
527 if (retval
!= ERROR_OK
) {
528 target
->state
= TARGET_UNKNOWN
;
531 target
->state
= TARGET_RUNNING
;
532 prev_target_state
= TARGET_RUNNING
;
535 if (cortex_m
->dcb_dhcsr
& S_HALT
) {
536 target
->state
= TARGET_HALTED
;
538 if ((prev_target_state
== TARGET_RUNNING
) || (prev_target_state
== TARGET_RESET
)) {
539 retval
= cortex_m_debug_entry(target
);
540 if (retval
!= ERROR_OK
)
543 if (arm_semihosting(target
, &retval
) != 0)
546 target_call_event_callbacks(target
, TARGET_EVENT_HALTED
);
548 if (prev_target_state
== TARGET_DEBUG_RUNNING
) {
550 retval
= cortex_m_debug_entry(target
);
551 if (retval
!= ERROR_OK
)
554 target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_HALTED
);
558 /* REVISIT when S_SLEEP is set, it's in a Sleep or DeepSleep state.
559 * How best to model low power modes?
562 if (target
->state
== TARGET_UNKNOWN
) {
563 /* check if processor is retiring instructions */
564 if (cortex_m
->dcb_dhcsr
& S_RETIRE_ST
) {
565 target
->state
= TARGET_RUNNING
;
570 /* Check that target is truly halted, since the target could be resumed externally */
571 if ((prev_target_state
== TARGET_HALTED
) && !(cortex_m
->dcb_dhcsr
& S_HALT
)) {
572 /* registers are now invalid */
573 register_cache_invalidate(armv7m
->arm
.core_cache
);
575 target
->state
= TARGET_RUNNING
;
576 LOG_WARNING("%s: external resume detected", target_name(target
));
577 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
581 /* Did we detect a failure condition that we cleared? */
582 if (detected_failure
!= ERROR_OK
)
583 retval
= detected_failure
;
587 static int cortex_m_halt(struct target
*target
)
589 LOG_DEBUG("target->state: %s",
590 target_state_name(target
));
592 if (target
->state
== TARGET_HALTED
) {
593 LOG_DEBUG("target was already halted");
597 if (target
->state
== TARGET_UNKNOWN
)
598 LOG_WARNING("target was in unknown state when halt was requested");
600 if (target
->state
== TARGET_RESET
) {
601 if ((jtag_get_reset_config() & RESET_SRST_PULLS_TRST
) && jtag_get_srst()) {
602 LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
603 return ERROR_TARGET_FAILURE
;
605 /* we came here in a reset_halt or reset_init sequence
606 * debug entry was already prepared in cortex_m3_assert_reset()
608 target
->debug_reason
= DBG_REASON_DBGRQ
;
614 /* Write to Debug Halting Control and Status Register */
615 cortex_m_write_debug_halt_mask(target
, C_HALT
, 0);
617 target
->debug_reason
= DBG_REASON_DBGRQ
;
622 static int cortex_m_soft_reset_halt(struct target
*target
)
624 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
625 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
626 uint32_t dcb_dhcsr
= 0;
627 int retval
, timeout
= 0;
629 /* soft_reset_halt is deprecated on cortex_m as the same functionality
630 * can be obtained by using 'reset halt' and 'cortex_m reset_config vectreset'
631 * As this reset only used VC_CORERESET it would only ever reset the cortex_m
632 * core, not the peripherals */
633 LOG_WARNING("soft_reset_halt is deprecated, please use 'reset halt' instead.");
635 /* Enter debug state on reset; restore DEMCR in endreset_event() */
636 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DEMCR
,
637 TRCENA
| VC_HARDERR
| VC_BUSERR
| VC_CORERESET
);
638 if (retval
!= ERROR_OK
)
641 /* Request a core-only reset */
642 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, NVIC_AIRCR
,
643 AIRCR_VECTKEY
| AIRCR_VECTRESET
);
644 if (retval
!= ERROR_OK
)
646 target
->state
= TARGET_RESET
;
648 /* registers are now invalid */
649 register_cache_invalidate(cortex_m
->armv7m
.arm
.core_cache
);
651 while (timeout
< 100) {
652 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &dcb_dhcsr
);
653 if (retval
== ERROR_OK
) {
654 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, NVIC_DFSR
,
655 &cortex_m
->nvic_dfsr
);
656 if (retval
!= ERROR_OK
)
658 if ((dcb_dhcsr
& S_HALT
)
659 && (cortex_m
->nvic_dfsr
& DFSR_VCATCH
)) {
660 LOG_DEBUG("system reset-halted, DHCSR 0x%08x, "
662 (unsigned) dcb_dhcsr
,
663 (unsigned) cortex_m
->nvic_dfsr
);
664 cortex_m_poll(target
);
665 /* FIXME restore user's vector catch config */
668 LOG_DEBUG("waiting for system reset-halt, "
669 "DHCSR 0x%08x, %d ms",
670 (unsigned) dcb_dhcsr
, timeout
);
679 void cortex_m_enable_breakpoints(struct target
*target
)
681 struct breakpoint
*breakpoint
= target
->breakpoints
;
683 /* set any pending breakpoints */
685 if (!breakpoint
->set
)
686 cortex_m_set_breakpoint(target
, breakpoint
);
687 breakpoint
= breakpoint
->next
;
691 static int cortex_m_resume(struct target
*target
, int current
,
692 target_addr_t address
, int handle_breakpoints
, int debug_execution
)
694 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
695 struct breakpoint
*breakpoint
= NULL
;
699 if (target
->state
!= TARGET_HALTED
) {
700 LOG_WARNING("target not halted");
701 return ERROR_TARGET_NOT_HALTED
;
704 if (!debug_execution
) {
705 target_free_all_working_areas(target
);
706 cortex_m_enable_breakpoints(target
);
707 cortex_m_enable_watchpoints(target
);
710 if (debug_execution
) {
711 r
= armv7m
->arm
.core_cache
->reg_list
+ ARMV7M_PRIMASK
;
713 /* Disable interrupts */
714 /* We disable interrupts in the PRIMASK register instead of
715 * masking with C_MASKINTS. This is probably the same issue
716 * as Cortex-M3 Erratum 377493 (fixed in r1p0): C_MASKINTS
717 * in parallel with disabled interrupts can cause local faults
720 * REVISIT this clearly breaks non-debug execution, since the
721 * PRIMASK register state isn't saved/restored... workaround
722 * by never resuming app code after debug execution.
724 buf_set_u32(r
->value
, 0, 1, 1);
728 /* Make sure we are in Thumb mode */
729 r
= armv7m
->arm
.cpsr
;
730 buf_set_u32(r
->value
, 24, 1, 1);
735 /* current = 1: continue on current pc, otherwise continue at <address> */
738 buf_set_u32(r
->value
, 0, 32, address
);
743 /* if we halted last time due to a bkpt instruction
744 * then we have to manually step over it, otherwise
745 * the core will break again */
747 if (!breakpoint_find(target
, buf_get_u32(r
->value
, 0, 32))
749 armv7m_maybe_skip_bkpt_inst(target
, NULL
);
751 resume_pc
= buf_get_u32(r
->value
, 0, 32);
753 armv7m_restore_context(target
);
755 /* the front-end may request us not to handle breakpoints */
756 if (handle_breakpoints
) {
757 /* Single step past breakpoint at current address */
758 breakpoint
= breakpoint_find(target
, resume_pc
);
760 LOG_DEBUG("unset breakpoint at " TARGET_ADDR_FMT
" (ID: %" PRIu32
")",
762 breakpoint
->unique_id
);
763 cortex_m_unset_breakpoint(target
, breakpoint
);
764 cortex_m_single_step_core(target
);
765 cortex_m_set_breakpoint(target
, breakpoint
);
770 cortex_m_write_debug_halt_mask(target
, 0, C_HALT
);
772 target
->debug_reason
= DBG_REASON_NOTHALTED
;
774 /* registers are now invalid */
775 register_cache_invalidate(armv7m
->arm
.core_cache
);
777 if (!debug_execution
) {
778 target
->state
= TARGET_RUNNING
;
779 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
780 LOG_DEBUG("target resumed at 0x%" PRIx32
"", resume_pc
);
782 target
->state
= TARGET_DEBUG_RUNNING
;
783 target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_RESUMED
);
784 LOG_DEBUG("target debug resumed at 0x%" PRIx32
"", resume_pc
);
790 /* int irqstepcount = 0; */
791 static int cortex_m_step(struct target
*target
, int current
,
792 target_addr_t address
, int handle_breakpoints
)
794 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
795 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
796 struct breakpoint
*breakpoint
= NULL
;
797 struct reg
*pc
= armv7m
->arm
.pc
;
798 bool bkpt_inst_found
= false;
800 bool isr_timed_out
= false;
802 if (target
->state
!= TARGET_HALTED
) {
803 LOG_WARNING("target not halted");
804 return ERROR_TARGET_NOT_HALTED
;
807 /* current = 1: continue on current pc, otherwise continue at <address> */
809 buf_set_u32(pc
->value
, 0, 32, address
);
811 uint32_t pc_value
= buf_get_u32(pc
->value
, 0, 32);
813 /* the front-end may request us not to handle breakpoints */
814 if (handle_breakpoints
) {
815 breakpoint
= breakpoint_find(target
, pc_value
);
817 cortex_m_unset_breakpoint(target
, breakpoint
);
820 armv7m_maybe_skip_bkpt_inst(target
, &bkpt_inst_found
);
822 target
->debug_reason
= DBG_REASON_SINGLESTEP
;
824 armv7m_restore_context(target
);
826 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
828 /* if no bkpt instruction is found at pc then we can perform
829 * a normal step, otherwise we have to manually step over the bkpt
830 * instruction - as such simulate a step */
831 if (bkpt_inst_found
== false) {
832 /* Automatic ISR masking mode off: Just step over the next instruction */
833 if ((cortex_m
->isrmasking_mode
!= CORTEX_M_ISRMASK_AUTO
))
834 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
836 /* Process interrupts during stepping in a way they don't interfere
841 * Set a temporary break point at the current pc and let the core run
842 * with interrupts enabled. Pending interrupts get served and we run
843 * into the breakpoint again afterwards. Then we step over the next
844 * instruction with interrupts disabled.
846 * If the pending interrupts don't complete within time, we leave the
847 * core running. This may happen if the interrupts trigger faster
848 * than the core can process them or the handler doesn't return.
850 * If no more breakpoints are available we simply do a step with
851 * interrupts enabled.
857 * If a break point is already set on the lower half word then a break point on
858 * the upper half word will not break again when the core is restarted. So we
859 * just step over the instruction with interrupts disabled.
861 * The documentation has no information about this, it was found by observation
862 * on STM32F1 and STM32F2. Proper explanation welcome. STM32F0 dosen't seem to
863 * suffer from this problem.
865 * To add some confusion: pc_value has bit 0 always set, while the breakpoint
866 * address has it always cleared. The former is done to indicate thumb mode
870 if ((pc_value
& 0x02) && breakpoint_find(target
, pc_value
& ~0x03)) {
871 LOG_DEBUG("Stepping over next instruction with interrupts disabled");
872 cortex_m_write_debug_halt_mask(target
, C_HALT
| C_MASKINTS
, 0);
873 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
874 /* Re-enable interrupts */
875 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_MASKINTS
);
879 /* Set a temporary break point */
881 retval
= cortex_m_set_breakpoint(target
, breakpoint
);
883 enum breakpoint_type type
= BKPT_HARD
;
884 if (cortex_m
->fp_rev
== 0 && pc_value
> 0x1FFFFFFF) {
885 /* FPB rev.1 cannot handle such addr, try BKPT instr */
888 retval
= breakpoint_add(target
, pc_value
, 2, type
);
891 bool tmp_bp_set
= (retval
== ERROR_OK
);
893 /* No more breakpoints left, just do a step */
895 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
898 LOG_DEBUG("Starting core to serve pending interrupts");
899 int64_t t_start
= timeval_ms();
900 cortex_m_write_debug_halt_mask(target
, 0, C_HALT
| C_STEP
);
902 /* Wait for pending handlers to complete or timeout */
904 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
,
906 &cortex_m
->dcb_dhcsr
);
907 if (retval
!= ERROR_OK
) {
908 target
->state
= TARGET_UNKNOWN
;
911 isr_timed_out
= ((timeval_ms() - t_start
) > 500);
912 } while (!((cortex_m
->dcb_dhcsr
& S_HALT
) || isr_timed_out
));
914 /* only remove breakpoint if we created it */
916 cortex_m_unset_breakpoint(target
, breakpoint
);
918 /* Remove the temporary breakpoint */
919 breakpoint_remove(target
, pc_value
);
923 LOG_DEBUG("Interrupt handlers didn't complete within time, "
924 "leaving target running");
926 /* Step over next instruction with interrupts disabled */
927 cortex_m_write_debug_halt_mask(target
,
930 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
931 /* Re-enable interrupts */
932 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_MASKINTS
);
939 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
940 if (retval
!= ERROR_OK
)
943 /* registers are now invalid */
944 register_cache_invalidate(armv7m
->arm
.core_cache
);
947 cortex_m_set_breakpoint(target
, breakpoint
);
950 /* Leave the core running. The user has to stop execution manually. */
951 target
->debug_reason
= DBG_REASON_NOTHALTED
;
952 target
->state
= TARGET_RUNNING
;
956 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
957 " nvic_icsr = 0x%" PRIx32
,
958 cortex_m
->dcb_dhcsr
, cortex_m
->nvic_icsr
);
960 retval
= cortex_m_debug_entry(target
);
961 if (retval
!= ERROR_OK
)
963 target_call_event_callbacks(target
, TARGET_EVENT_HALTED
);
965 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
966 " nvic_icsr = 0x%" PRIx32
,
967 cortex_m
->dcb_dhcsr
, cortex_m
->nvic_icsr
);
972 static int cortex_m_assert_reset(struct target
*target
)
974 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
975 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
976 enum cortex_m_soft_reset_config reset_config
= cortex_m
->soft_reset_config
;
978 LOG_DEBUG("target->state: %s",
979 target_state_name(target
));
981 enum reset_types jtag_reset_config
= jtag_get_reset_config();
983 if (target_has_event_action(target
, TARGET_EVENT_RESET_ASSERT
)) {
984 /* allow scripts to override the reset event */
986 target_handle_event(target
, TARGET_EVENT_RESET_ASSERT
);
987 register_cache_invalidate(cortex_m
->armv7m
.arm
.core_cache
);
988 target
->state
= TARGET_RESET
;
993 /* some cores support connecting while srst is asserted
994 * use that mode is it has been configured */
996 bool srst_asserted
= false;
998 if (!target_was_examined(target
)) {
999 if (jtag_reset_config
& RESET_HAS_SRST
) {
1000 adapter_assert_reset();
1001 if (target
->reset_halt
)
1002 LOG_ERROR("Target not examined, will not halt after reset!");
1005 LOG_ERROR("Target not examined, reset NOT asserted!");
1010 if ((jtag_reset_config
& RESET_HAS_SRST
) &&
1011 (jtag_reset_config
& RESET_SRST_NO_GATING
)) {
1012 adapter_assert_reset();
1013 srst_asserted
= true;
1016 /* Enable debug requests */
1018 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
1019 /* Store important errors instead of failing and proceed to reset assert */
1021 if (retval
!= ERROR_OK
|| !(cortex_m
->dcb_dhcsr
& C_DEBUGEN
))
1022 retval
= cortex_m_write_debug_halt_mask(target
, 0, C_HALT
| C_STEP
| C_MASKINTS
);
1024 /* If the processor is sleeping in a WFI or WFE instruction, the
1025 * C_HALT bit must be asserted to regain control */
1026 if (retval
== ERROR_OK
&& (cortex_m
->dcb_dhcsr
& S_SLEEP
))
1027 retval
= cortex_m_write_debug_halt_mask(target
, C_HALT
, 0);
1029 mem_ap_write_u32(armv7m
->debug_ap
, DCB_DCRDR
, 0);
1030 /* Ignore less important errors */
1032 if (!target
->reset_halt
) {
1033 /* Set/Clear C_MASKINTS in a separate operation */
1034 if (cortex_m
->dcb_dhcsr
& C_MASKINTS
)
1035 cortex_m_write_debug_halt_mask(target
, 0, C_MASKINTS
);
1037 /* clear any debug flags before resuming */
1038 cortex_m_clear_halt(target
);
1040 /* clear C_HALT in dhcsr reg */
1041 cortex_m_write_debug_halt_mask(target
, 0, C_HALT
);
1043 /* Halt in debug on reset; endreset_event() restores DEMCR.
1045 * REVISIT catching BUSERR presumably helps to defend against
1046 * bad vector table entries. Should this include MMERR or
1050 retval2
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DEMCR
,
1051 TRCENA
| VC_HARDERR
| VC_BUSERR
| VC_CORERESET
);
1052 if (retval
!= ERROR_OK
|| retval2
!= ERROR_OK
)
1053 LOG_INFO("AP write error, reset will not halt");
1056 if (jtag_reset_config
& RESET_HAS_SRST
) {
1057 /* default to asserting srst */
1059 adapter_assert_reset();
1061 /* srst is asserted, ignore AP access errors */
1064 /* Use a standard Cortex-M3 software reset mechanism.
1065 * We default to using VECRESET as it is supported on all current cores
1066 * (except Cortex-M0, M0+ and M1 which support SYSRESETREQ only!)
1067 * This has the disadvantage of not resetting the peripherals, so a
1068 * reset-init event handler is needed to perform any peripheral resets.
1070 if (!cortex_m
->vectreset_supported
1071 && reset_config
== CORTEX_M_RESET_VECTRESET
) {
1072 reset_config
= CORTEX_M_RESET_SYSRESETREQ
;
1073 LOG_WARNING("VECTRESET is not supported on this Cortex-M core, using SYSRESETREQ instead.");
1074 LOG_WARNING("Set 'cortex_m reset_config sysresetreq'.");
1077 LOG_DEBUG("Using Cortex-M %s", (reset_config
== CORTEX_M_RESET_SYSRESETREQ
)
1078 ? "SYSRESETREQ" : "VECTRESET");
1080 if (reset_config
== CORTEX_M_RESET_VECTRESET
) {
1081 LOG_WARNING("Only resetting the Cortex-M core, use a reset-init event "
1082 "handler to reset any peripherals or configure hardware srst support.");
1086 retval3
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, NVIC_AIRCR
,
1087 AIRCR_VECTKEY
| ((reset_config
== CORTEX_M_RESET_SYSRESETREQ
)
1088 ? AIRCR_SYSRESETREQ
: AIRCR_VECTRESET
));
1089 if (retval3
!= ERROR_OK
)
1090 LOG_DEBUG("Ignoring AP write error right after reset");
1092 retval3
= dap_dp_init(armv7m
->debug_ap
->dap
);
1093 if (retval3
!= ERROR_OK
)
1094 LOG_ERROR("DP initialisation failed");
1097 /* I do not know why this is necessary, but it
1098 * fixes strange effects (step/resume cause NMI
1099 * after reset) on LM3S6918 -- Michael Schwingen
1102 mem_ap_read_atomic_u32(armv7m
->debug_ap
, NVIC_AIRCR
, &tmp
);
1106 target
->state
= TARGET_RESET
;
1107 jtag_add_sleep(50000);
1109 register_cache_invalidate(cortex_m
->armv7m
.arm
.core_cache
);
1111 /* now return stored error code if any */
1112 if (retval
!= ERROR_OK
)
1115 if (target
->reset_halt
) {
1116 retval
= target_halt(target
);
1117 if (retval
!= ERROR_OK
)
1124 static int cortex_m_deassert_reset(struct target
*target
)
1126 struct armv7m_common
*armv7m
= &target_to_cm(target
)->armv7m
;
1128 LOG_DEBUG("target->state: %s",
1129 target_state_name(target
));
1131 /* deassert reset lines */
1132 adapter_deassert_reset();
1134 enum reset_types jtag_reset_config
= jtag_get_reset_config();
1136 if ((jtag_reset_config
& RESET_HAS_SRST
) &&
1137 !(jtag_reset_config
& RESET_SRST_NO_GATING
) &&
1138 target_was_examined(target
)) {
1139 int retval
= dap_dp_init(armv7m
->debug_ap
->dap
);
1140 if (retval
!= ERROR_OK
) {
1141 LOG_ERROR("DP initialisation failed");
1149 int cortex_m_set_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1153 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1154 struct cortex_m_fp_comparator
*comparator_list
= cortex_m
->fp_comparator_list
;
1156 if (breakpoint
->set
) {
1157 LOG_WARNING("breakpoint (BPID: %" PRIu32
") already set", breakpoint
->unique_id
);
1161 if (breakpoint
->type
== BKPT_HARD
) {
1162 uint32_t fpcr_value
;
1163 while (comparator_list
[fp_num
].used
&& (fp_num
< cortex_m
->fp_num_code
))
1165 if (fp_num
>= cortex_m
->fp_num_code
) {
1166 LOG_ERROR("Can not find free FPB Comparator!");
1167 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1169 breakpoint
->set
= fp_num
+ 1;
1170 fpcr_value
= breakpoint
->address
| 1;
1171 if (cortex_m
->fp_rev
== 0) {
1172 if (breakpoint
->address
> 0x1FFFFFFF) {
1173 LOG_ERROR("Cortex-M Flash Patch Breakpoint rev.1 cannot handle HW breakpoint above address 0x1FFFFFFE");
1177 hilo
= (breakpoint
->address
& 0x2) ? FPCR_REPLACE_BKPT_HIGH
: FPCR_REPLACE_BKPT_LOW
;
1178 fpcr_value
= (fpcr_value
& 0x1FFFFFFC) | hilo
| 1;
1179 } else if (cortex_m
->fp_rev
> 1) {
1180 LOG_ERROR("Unhandled Cortex-M Flash Patch Breakpoint architecture revision");
1183 comparator_list
[fp_num
].used
= true;
1184 comparator_list
[fp_num
].fpcr_value
= fpcr_value
;
1185 target_write_u32(target
, comparator_list
[fp_num
].fpcr_address
,
1186 comparator_list
[fp_num
].fpcr_value
);
1187 LOG_DEBUG("fpc_num %i fpcr_value 0x%" PRIx32
"",
1189 comparator_list
[fp_num
].fpcr_value
);
1190 if (!cortex_m
->fpb_enabled
) {
1191 LOG_DEBUG("FPB wasn't enabled, do it now");
1192 retval
= cortex_m_enable_fpb(target
);
1193 if (retval
!= ERROR_OK
) {
1194 LOG_ERROR("Failed to enable the FPB");
1198 cortex_m
->fpb_enabled
= true;
1200 } else if (breakpoint
->type
== BKPT_SOFT
) {
1203 /* NOTE: on ARMv6-M and ARMv7-M, BKPT(0xab) is used for
1204 * semihosting; don't use that. Otherwise the BKPT
1205 * parameter is arbitrary.
1207 buf_set_u32(code
, 0, 32, ARMV5_T_BKPT(0x11));
1208 retval
= target_read_memory(target
,
1209 breakpoint
->address
& 0xFFFFFFFE,
1210 breakpoint
->length
, 1,
1211 breakpoint
->orig_instr
);
1212 if (retval
!= ERROR_OK
)
1214 retval
= target_write_memory(target
,
1215 breakpoint
->address
& 0xFFFFFFFE,
1216 breakpoint
->length
, 1,
1218 if (retval
!= ERROR_OK
)
1220 breakpoint
->set
= true;
1223 LOG_DEBUG("BPID: %" PRIu32
", Type: %d, Address: " TARGET_ADDR_FMT
" Length: %d (set=%d)",
1224 breakpoint
->unique_id
,
1225 (int)(breakpoint
->type
),
1226 breakpoint
->address
,
1233 int cortex_m_unset_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1236 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1237 struct cortex_m_fp_comparator
*comparator_list
= cortex_m
->fp_comparator_list
;
1239 if (!breakpoint
->set
) {
1240 LOG_WARNING("breakpoint not set");
1244 LOG_DEBUG("BPID: %" PRIu32
", Type: %d, Address: " TARGET_ADDR_FMT
" Length: %d (set=%d)",
1245 breakpoint
->unique_id
,
1246 (int)(breakpoint
->type
),
1247 breakpoint
->address
,
1251 if (breakpoint
->type
== BKPT_HARD
) {
1252 int fp_num
= breakpoint
->set
- 1;
1253 if ((fp_num
< 0) || (fp_num
>= cortex_m
->fp_num_code
)) {
1254 LOG_DEBUG("Invalid FP Comparator number in breakpoint");
1257 comparator_list
[fp_num
].used
= false;
1258 comparator_list
[fp_num
].fpcr_value
= 0;
1259 target_write_u32(target
, comparator_list
[fp_num
].fpcr_address
,
1260 comparator_list
[fp_num
].fpcr_value
);
1262 /* restore original instruction (kept in target endianness) */
1263 retval
= target_write_memory(target
, breakpoint
->address
& 0xFFFFFFFE,
1264 breakpoint
->length
, 1,
1265 breakpoint
->orig_instr
);
1266 if (retval
!= ERROR_OK
)
1269 breakpoint
->set
= false;
1274 int cortex_m_add_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1276 if (breakpoint
->length
== 3) {
1277 LOG_DEBUG("Using a two byte breakpoint for 32bit Thumb-2 request");
1278 breakpoint
->length
= 2;
1281 if ((breakpoint
->length
!= 2)) {
1282 LOG_INFO("only breakpoints of two bytes length supported");
1283 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1286 return cortex_m_set_breakpoint(target
, breakpoint
);
1289 int cortex_m_remove_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1291 /* REVISIT why check? FPB can be updated with core running ... */
1292 if (target
->state
!= TARGET_HALTED
) {
1293 LOG_WARNING("target not halted");
1294 return ERROR_TARGET_NOT_HALTED
;
1297 if (breakpoint
->set
)
1298 cortex_m_unset_breakpoint(target
, breakpoint
);
1303 int cortex_m_set_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1306 uint32_t mask
, temp
;
1307 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1309 /* watchpoint params were validated earlier */
1311 temp
= watchpoint
->length
;
1318 /* REVISIT Don't fully trust these "not used" records ... users
1319 * may set up breakpoints by hand, e.g. dual-address data value
1320 * watchpoint using comparator #1; comparator #0 matching cycle
1321 * count; send data trace info through ITM and TPIU; etc
1323 struct cortex_m_dwt_comparator
*comparator
;
1325 for (comparator
= cortex_m
->dwt_comparator_list
;
1326 comparator
->used
&& dwt_num
< cortex_m
->dwt_num_comp
;
1327 comparator
++, dwt_num
++)
1329 if (dwt_num
>= cortex_m
->dwt_num_comp
) {
1330 LOG_ERROR("Can not find free DWT Comparator");
1333 comparator
->used
= true;
1334 watchpoint
->set
= dwt_num
+ 1;
1336 comparator
->comp
= watchpoint
->address
;
1337 target_write_u32(target
, comparator
->dwt_comparator_address
+ 0,
1340 comparator
->mask
= mask
;
1341 target_write_u32(target
, comparator
->dwt_comparator_address
+ 4,
1344 switch (watchpoint
->rw
) {
1346 comparator
->function
= 5;
1349 comparator
->function
= 6;
1352 comparator
->function
= 7;
1355 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8,
1356 comparator
->function
);
1358 LOG_DEBUG("Watchpoint (ID %d) DWT%d 0x%08x 0x%x 0x%05x",
1359 watchpoint
->unique_id
, dwt_num
,
1360 (unsigned) comparator
->comp
,
1361 (unsigned) comparator
->mask
,
1362 (unsigned) comparator
->function
);
1366 int cortex_m_unset_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1368 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1369 struct cortex_m_dwt_comparator
*comparator
;
1372 if (!watchpoint
->set
) {
1373 LOG_WARNING("watchpoint (wpid: %d) not set",
1374 watchpoint
->unique_id
);
1378 dwt_num
= watchpoint
->set
- 1;
1380 LOG_DEBUG("Watchpoint (ID %d) DWT%d address: 0x%08x clear",
1381 watchpoint
->unique_id
, dwt_num
,
1382 (unsigned) watchpoint
->address
);
1384 if ((dwt_num
< 0) || (dwt_num
>= cortex_m
->dwt_num_comp
)) {
1385 LOG_DEBUG("Invalid DWT Comparator number in watchpoint");
1389 comparator
= cortex_m
->dwt_comparator_list
+ dwt_num
;
1390 comparator
->used
= false;
1391 comparator
->function
= 0;
1392 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8,
1393 comparator
->function
);
1395 watchpoint
->set
= false;
1400 int cortex_m_add_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1402 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1404 if (cortex_m
->dwt_comp_available
< 1) {
1405 LOG_DEBUG("no comparators?");
1406 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1409 /* hardware doesn't support data value masking */
1410 if (watchpoint
->mask
!= ~(uint32_t)0) {
1411 LOG_DEBUG("watchpoint value masks not supported");
1412 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1415 /* hardware allows address masks of up to 32K */
1418 for (mask
= 0; mask
< 16; mask
++) {
1419 if ((1u << mask
) == watchpoint
->length
)
1423 LOG_DEBUG("unsupported watchpoint length");
1424 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1426 if (watchpoint
->address
& ((1 << mask
) - 1)) {
1427 LOG_DEBUG("watchpoint address is unaligned");
1428 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1431 /* Caller doesn't seem to be able to describe watching for data
1432 * values of zero; that flags "no value".
1434 * REVISIT This DWT may well be able to watch for specific data
1435 * values. Requires comparator #1 to set DATAVMATCH and match
1436 * the data, and another comparator (DATAVADDR0) matching addr.
1438 if (watchpoint
->value
) {
1439 LOG_DEBUG("data value watchpoint not YET supported");
1440 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1443 cortex_m
->dwt_comp_available
--;
1444 LOG_DEBUG("dwt_comp_available: %d", cortex_m
->dwt_comp_available
);
1449 int cortex_m_remove_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1451 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1453 /* REVISIT why check? DWT can be updated with core running ... */
1454 if (target
->state
!= TARGET_HALTED
) {
1455 LOG_WARNING("target not halted");
1456 return ERROR_TARGET_NOT_HALTED
;
1459 if (watchpoint
->set
)
1460 cortex_m_unset_watchpoint(target
, watchpoint
);
1462 cortex_m
->dwt_comp_available
++;
1463 LOG_DEBUG("dwt_comp_available: %d", cortex_m
->dwt_comp_available
);
1468 void cortex_m_enable_watchpoints(struct target
*target
)
1470 struct watchpoint
*watchpoint
= target
->watchpoints
;
1472 /* set any pending watchpoints */
1473 while (watchpoint
) {
1474 if (!watchpoint
->set
)
1475 cortex_m_set_watchpoint(target
, watchpoint
);
1476 watchpoint
= watchpoint
->next
;
1480 static int cortex_m_load_core_reg_u32(struct target
*target
,
1481 uint32_t num
, uint32_t *value
)
1485 /* NOTE: we "know" here that the register identifiers used
1486 * in the v7m header match the Cortex-M3 Debug Core Register
1487 * Selector values for R0..R15, xPSR, MSP, and PSP.
1491 /* read a normal core register */
1492 retval
= cortexm_dap_read_coreregister_u32(target
, value
, num
);
1494 if (retval
!= ERROR_OK
) {
1495 LOG_ERROR("JTAG failure %i", retval
);
1496 return ERROR_JTAG_DEVICE_ERROR
;
1498 LOG_DEBUG("load from core reg %i value 0x%" PRIx32
"", (int)num
, *value
);
1502 /* Floating-point Status and Registers */
1503 retval
= target_write_u32(target
, DCB_DCRSR
, 0x21);
1504 if (retval
!= ERROR_OK
)
1506 retval
= target_read_u32(target
, DCB_DCRDR
, value
);
1507 if (retval
!= ERROR_OK
)
1509 LOG_DEBUG("load from FPSCR value 0x%" PRIx32
, *value
);
1512 case ARMV7M_S0
... ARMV7M_S31
:
1513 /* Floating-point Status and Registers */
1514 retval
= target_write_u32(target
, DCB_DCRSR
, num
- ARMV7M_S0
+ 0x40);
1515 if (retval
!= ERROR_OK
)
1517 retval
= target_read_u32(target
, DCB_DCRDR
, value
);
1518 if (retval
!= ERROR_OK
)
1520 LOG_DEBUG("load from FPU reg S%d value 0x%" PRIx32
,
1521 (int)(num
- ARMV7M_S0
), *value
);
1524 case ARMV7M_PRIMASK
:
1525 case ARMV7M_BASEPRI
:
1526 case ARMV7M_FAULTMASK
:
1527 case ARMV7M_CONTROL
:
1528 /* Cortex-M3 packages these four registers as bitfields
1529 * in one Debug Core register. So say r0 and r2 docs;
1530 * it was removed from r1 docs, but still works.
1532 cortexm_dap_read_coreregister_u32(target
, value
, 20);
1535 case ARMV7M_PRIMASK
:
1536 *value
= buf_get_u32((uint8_t *)value
, 0, 1);
1539 case ARMV7M_BASEPRI
:
1540 *value
= buf_get_u32((uint8_t *)value
, 8, 8);
1543 case ARMV7M_FAULTMASK
:
1544 *value
= buf_get_u32((uint8_t *)value
, 16, 1);
1547 case ARMV7M_CONTROL
:
1548 *value
= buf_get_u32((uint8_t *)value
, 24, 2);
1552 LOG_DEBUG("load from special reg %i value 0x%" PRIx32
"", (int)num
, *value
);
1556 return ERROR_COMMAND_SYNTAX_ERROR
;
1562 static int cortex_m_store_core_reg_u32(struct target
*target
,
1563 uint32_t num
, uint32_t value
)
1567 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1569 /* NOTE: we "know" here that the register identifiers used
1570 * in the v7m header match the Cortex-M3 Debug Core Register
1571 * Selector values for R0..R15, xPSR, MSP, and PSP.
1575 retval
= cortexm_dap_write_coreregister_u32(target
, value
, num
);
1576 if (retval
!= ERROR_OK
) {
1579 LOG_ERROR("JTAG failure");
1580 r
= armv7m
->arm
.core_cache
->reg_list
+ num
;
1581 r
->dirty
= r
->valid
;
1582 return ERROR_JTAG_DEVICE_ERROR
;
1584 LOG_DEBUG("write core reg %i value 0x%" PRIx32
"", (int)num
, value
);
1588 /* Floating-point Status and Registers */
1589 retval
= target_write_u32(target
, DCB_DCRDR
, value
);
1590 if (retval
!= ERROR_OK
)
1592 retval
= target_write_u32(target
, DCB_DCRSR
, 0x21 | (1<<16));
1593 if (retval
!= ERROR_OK
)
1595 LOG_DEBUG("write FPSCR value 0x%" PRIx32
, value
);
1598 case ARMV7M_S0
... ARMV7M_S31
:
1599 /* Floating-point Status and Registers */
1600 retval
= target_write_u32(target
, DCB_DCRDR
, value
);
1601 if (retval
!= ERROR_OK
)
1603 retval
= target_write_u32(target
, DCB_DCRSR
, (num
- ARMV7M_S0
+ 0x40) | (1<<16));
1604 if (retval
!= ERROR_OK
)
1606 LOG_DEBUG("write FPU reg S%d value 0x%" PRIx32
,
1607 (int)(num
- ARMV7M_S0
), value
);
1610 case ARMV7M_PRIMASK
:
1611 case ARMV7M_BASEPRI
:
1612 case ARMV7M_FAULTMASK
:
1613 case ARMV7M_CONTROL
:
1614 /* Cortex-M3 packages these four registers as bitfields
1615 * in one Debug Core register. So say r0 and r2 docs;
1616 * it was removed from r1 docs, but still works.
1618 cortexm_dap_read_coreregister_u32(target
, ®
, 20);
1621 case ARMV7M_PRIMASK
:
1622 buf_set_u32((uint8_t *)®
, 0, 1, value
);
1625 case ARMV7M_BASEPRI
:
1626 buf_set_u32((uint8_t *)®
, 8, 8, value
);
1629 case ARMV7M_FAULTMASK
:
1630 buf_set_u32((uint8_t *)®
, 16, 1, value
);
1633 case ARMV7M_CONTROL
:
1634 buf_set_u32((uint8_t *)®
, 24, 2, value
);
1638 cortexm_dap_write_coreregister_u32(target
, reg
, 20);
1640 LOG_DEBUG("write special reg %i value 0x%" PRIx32
" ", (int)num
, value
);
1644 return ERROR_COMMAND_SYNTAX_ERROR
;
1650 static int cortex_m_read_memory(struct target
*target
, target_addr_t address
,
1651 uint32_t size
, uint32_t count
, uint8_t *buffer
)
1653 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1655 if (armv7m
->arm
.is_armv6m
) {
1656 /* armv6m does not handle unaligned memory access */
1657 if (((size
== 4) && (address
& 0x3u
)) || ((size
== 2) && (address
& 0x1u
)))
1658 return ERROR_TARGET_UNALIGNED_ACCESS
;
1661 return mem_ap_read_buf(armv7m
->debug_ap
, buffer
, size
, count
, address
);
1664 static int cortex_m_write_memory(struct target
*target
, target_addr_t address
,
1665 uint32_t size
, uint32_t count
, const uint8_t *buffer
)
1667 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1669 if (armv7m
->arm
.is_armv6m
) {
1670 /* armv6m does not handle unaligned memory access */
1671 if (((size
== 4) && (address
& 0x3u
)) || ((size
== 2) && (address
& 0x1u
)))
1672 return ERROR_TARGET_UNALIGNED_ACCESS
;
1675 return mem_ap_write_buf(armv7m
->debug_ap
, buffer
, size
, count
, address
);
1678 static int cortex_m_init_target(struct command_context
*cmd_ctx
,
1679 struct target
*target
)
1681 armv7m_build_reg_cache(target
);
1682 arm_semihosting_init(target
);
1686 void cortex_m_deinit_target(struct target
*target
)
1688 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1690 free(cortex_m
->fp_comparator_list
);
1692 cortex_m_dwt_free(target
);
1693 armv7m_free_reg_cache(target
);
1695 free(target
->private_config
);
1699 int cortex_m_profiling(struct target
*target
, uint32_t *samples
,
1700 uint32_t max_num_samples
, uint32_t *num_samples
, uint32_t seconds
)
1702 struct timeval timeout
, now
;
1703 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1705 bool use_pcsr
= false;
1706 int retval
= ERROR_OK
;
1709 gettimeofday(&timeout
, NULL
);
1710 timeval_add_time(&timeout
, seconds
, 0);
1712 retval
= target_read_u32(target
, DWT_PCSR
, ®_value
);
1713 if (retval
!= ERROR_OK
) {
1714 LOG_ERROR("Error while reading PCSR");
1718 if (reg_value
!= 0) {
1720 LOG_INFO("Starting Cortex-M profiling. Sampling DWT_PCSR as fast as we can...");
1722 LOG_INFO("Starting profiling. Halting and resuming the"
1723 " target as often as we can...");
1724 reg
= register_get_by_name(target
->reg_cache
, "pc", 1);
1727 /* Make sure the target is running */
1728 target_poll(target
);
1729 if (target
->state
== TARGET_HALTED
)
1730 retval
= target_resume(target
, 1, 0, 0, 0);
1732 if (retval
!= ERROR_OK
) {
1733 LOG_ERROR("Error while resuming target");
1737 uint32_t sample_count
= 0;
1741 if (armv7m
&& armv7m
->debug_ap
) {
1742 uint32_t read_count
= max_num_samples
- sample_count
;
1743 if (read_count
> 1024)
1746 retval
= mem_ap_read_buf_noincr(armv7m
->debug_ap
,
1747 (void *)&samples
[sample_count
],
1748 4, read_count
, DWT_PCSR
);
1749 sample_count
+= read_count
;
1751 target_read_u32(target
, DWT_PCSR
, &samples
[sample_count
++]);
1754 target_poll(target
);
1755 if (target
->state
== TARGET_HALTED
) {
1756 reg_value
= buf_get_u32(reg
->value
, 0, 32);
1757 /* current pc, addr = 0, do not handle breakpoints, not debugging */
1758 retval
= target_resume(target
, 1, 0, 0, 0);
1759 samples
[sample_count
++] = reg_value
;
1760 target_poll(target
);
1761 alive_sleep(10); /* sleep 10ms, i.e. <100 samples/second. */
1762 } else if (target
->state
== TARGET_RUNNING
) {
1763 /* We want to quickly sample the PC. */
1764 retval
= target_halt(target
);
1766 LOG_INFO("Target not halted or running");
1772 if (retval
!= ERROR_OK
) {
1773 LOG_ERROR("Error while reading %s", use_pcsr
? "PCSR" : "target pc");
1778 gettimeofday(&now
, NULL
);
1779 if (sample_count
>= max_num_samples
|| timeval_compare(&now
, &timeout
) > 0) {
1780 LOG_INFO("Profiling completed. %" PRIu32
" samples.", sample_count
);
1785 *num_samples
= sample_count
;
1790 /* REVISIT cache valid/dirty bits are unmaintained. We could set "valid"
1791 * on r/w if the core is not running, and clear on resume or reset ... or
1792 * at least, in a post_restore_context() method.
1795 struct dwt_reg_state
{
1796 struct target
*target
;
1798 uint8_t value
[4]; /* scratch/cache */
1801 static int cortex_m_dwt_get_reg(struct reg
*reg
)
1803 struct dwt_reg_state
*state
= reg
->arch_info
;
1806 int retval
= target_read_u32(state
->target
, state
->addr
, &tmp
);
1807 if (retval
!= ERROR_OK
)
1810 buf_set_u32(state
->value
, 0, 32, tmp
);
1814 static int cortex_m_dwt_set_reg(struct reg
*reg
, uint8_t *buf
)
1816 struct dwt_reg_state
*state
= reg
->arch_info
;
1818 return target_write_u32(state
->target
, state
->addr
,
1819 buf_get_u32(buf
, 0, reg
->size
));
1828 static const struct dwt_reg dwt_base_regs
[] = {
1829 { DWT_CTRL
, "dwt_ctrl", 32, },
1830 /* NOTE that Erratum 532314 (fixed r2p0) affects CYCCNT: it wrongly
1831 * increments while the core is asleep.
1833 { DWT_CYCCNT
, "dwt_cyccnt", 32, },
1834 /* plus some 8 bit counters, useful for profiling with TPIU */
1837 static const struct dwt_reg dwt_comp
[] = {
1838 #define DWT_COMPARATOR(i) \
1839 { DWT_COMP0 + 0x10 * (i), "dwt_" #i "_comp", 32, }, \
1840 { DWT_MASK0 + 0x10 * (i), "dwt_" #i "_mask", 4, }, \
1841 { DWT_FUNCTION0 + 0x10 * (i), "dwt_" #i "_function", 32, }
1858 #undef DWT_COMPARATOR
1861 static const struct reg_arch_type dwt_reg_type
= {
1862 .get
= cortex_m_dwt_get_reg
,
1863 .set
= cortex_m_dwt_set_reg
,
1866 static void cortex_m_dwt_addreg(struct target
*t
, struct reg
*r
, const struct dwt_reg
*d
)
1868 struct dwt_reg_state
*state
;
1870 state
= calloc(1, sizeof *state
);
1873 state
->addr
= d
->addr
;
1878 r
->value
= state
->value
;
1879 r
->arch_info
= state
;
1880 r
->type
= &dwt_reg_type
;
1883 void cortex_m_dwt_setup(struct cortex_m_common
*cm
, struct target
*target
)
1886 struct reg_cache
*cache
;
1887 struct cortex_m_dwt_comparator
*comparator
;
1890 target_read_u32(target
, DWT_CTRL
, &dwtcr
);
1891 LOG_DEBUG("DWT_CTRL: 0x%" PRIx32
, dwtcr
);
1893 LOG_DEBUG("no DWT");
1897 cm
->dwt_num_comp
= (dwtcr
>> 28) & 0xF;
1898 cm
->dwt_comp_available
= cm
->dwt_num_comp
;
1899 cm
->dwt_comparator_list
= calloc(cm
->dwt_num_comp
,
1900 sizeof(struct cortex_m_dwt_comparator
));
1901 if (!cm
->dwt_comparator_list
) {
1903 cm
->dwt_num_comp
= 0;
1904 LOG_ERROR("out of mem");
1908 cache
= calloc(1, sizeof *cache
);
1911 free(cm
->dwt_comparator_list
);
1914 cache
->name
= "Cortex-M DWT registers";
1915 cache
->num_regs
= 2 + cm
->dwt_num_comp
* 3;
1916 cache
->reg_list
= calloc(cache
->num_regs
, sizeof *cache
->reg_list
);
1917 if (!cache
->reg_list
) {
1922 for (reg
= 0; reg
< 2; reg
++)
1923 cortex_m_dwt_addreg(target
, cache
->reg_list
+ reg
,
1924 dwt_base_regs
+ reg
);
1926 comparator
= cm
->dwt_comparator_list
;
1927 for (i
= 0; i
< cm
->dwt_num_comp
; i
++, comparator
++) {
1930 comparator
->dwt_comparator_address
= DWT_COMP0
+ 0x10 * i
;
1931 for (j
= 0; j
< 3; j
++, reg
++)
1932 cortex_m_dwt_addreg(target
, cache
->reg_list
+ reg
,
1933 dwt_comp
+ 3 * i
+ j
);
1935 /* make sure we clear any watchpoints enabled on the target */
1936 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8, 0);
1939 *register_get_last_cache_p(&target
->reg_cache
) = cache
;
1940 cm
->dwt_cache
= cache
;
1942 LOG_DEBUG("DWT dwtcr 0x%" PRIx32
", comp %d, watch%s",
1943 dwtcr
, cm
->dwt_num_comp
,
1944 (dwtcr
& (0xf << 24)) ? " only" : "/trigger");
1946 /* REVISIT: if num_comp > 1, check whether comparator #1 can
1947 * implement single-address data value watchpoints ... so we
1948 * won't need to check it later, when asked to set one up.
1952 static void cortex_m_dwt_free(struct target
*target
)
1954 struct cortex_m_common
*cm
= target_to_cm(target
);
1955 struct reg_cache
*cache
= cm
->dwt_cache
;
1957 free(cm
->dwt_comparator_list
);
1958 cm
->dwt_comparator_list
= NULL
;
1959 cm
->dwt_num_comp
= 0;
1962 register_unlink_cache(&target
->reg_cache
, cache
);
1964 if (cache
->reg_list
) {
1965 for (size_t i
= 0; i
< cache
->num_regs
; i
++)
1966 free(cache
->reg_list
[i
].arch_info
);
1967 free(cache
->reg_list
);
1971 cm
->dwt_cache
= NULL
;
1974 #define MVFR0 0xe000ef40
1975 #define MVFR1 0xe000ef44
1977 #define MVFR0_DEFAULT_M4 0x10110021
1978 #define MVFR1_DEFAULT_M4 0x11000011
1980 #define MVFR0_DEFAULT_M7_SP 0x10110021
1981 #define MVFR0_DEFAULT_M7_DP 0x10110221
1982 #define MVFR1_DEFAULT_M7_SP 0x11000011
1983 #define MVFR1_DEFAULT_M7_DP 0x12000011
1985 int cortex_m_examine(struct target
*target
)
1988 uint32_t cpuid
, fpcr
, mvfr0
, mvfr1
;
1990 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1991 struct adiv5_dap
*swjdp
= cortex_m
->armv7m
.arm
.dap
;
1992 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1994 /* stlink shares the examine handler but does not support
1996 if (!armv7m
->stlink
) {
1997 if (cortex_m
->apsel
== DP_APSEL_INVALID
) {
1998 /* Search for the MEM-AP */
1999 retval
= dap_find_ap(swjdp
, AP_TYPE_AHB_AP
, &armv7m
->debug_ap
);
2000 if (retval
!= ERROR_OK
) {
2001 LOG_ERROR("Could not find MEM-AP to control the core");
2005 armv7m
->debug_ap
= dap_ap(swjdp
, cortex_m
->apsel
);
2008 /* Leave (only) generic DAP stuff for debugport_init(); */
2009 armv7m
->debug_ap
->memaccess_tck
= 8;
2011 retval
= mem_ap_init(armv7m
->debug_ap
);
2012 if (retval
!= ERROR_OK
)
2016 if (!target_was_examined(target
)) {
2017 target_set_examined(target
);
2019 /* Read from Device Identification Registers */
2020 retval
= target_read_u32(target
, CPUID
, &cpuid
);
2021 if (retval
!= ERROR_OK
)
2025 i
= (cpuid
>> 4) & 0xf;
2027 LOG_DEBUG("Cortex-M%d r%" PRId8
"p%" PRId8
" processor detected",
2028 i
, (uint8_t)((cpuid
>> 20) & 0xf), (uint8_t)((cpuid
>> 0) & 0xf));
2031 rev
= (cpuid
>> 20) & 0xf;
2032 patch
= (cpuid
>> 0) & 0xf;
2033 if ((rev
== 0) && (patch
< 2))
2034 LOG_WARNING("Silicon bug: single stepping will enter pending exception handler!");
2036 LOG_DEBUG("cpuid: 0x%8.8" PRIx32
"", cpuid
);
2038 /* VECTRESET is not supported on Cortex-M0, M0+ and M1 */
2039 cortex_m
->vectreset_supported
= i
> 1;
2042 target_read_u32(target
, MVFR0
, &mvfr0
);
2043 target_read_u32(target
, MVFR1
, &mvfr1
);
2045 /* test for floating point feature on Cortex-M4 */
2046 if ((mvfr0
== MVFR0_DEFAULT_M4
) && (mvfr1
== MVFR1_DEFAULT_M4
)) {
2047 LOG_DEBUG("Cortex-M%d floating point feature FPv4_SP found", i
);
2048 armv7m
->fp_feature
= FPv4_SP
;
2050 } else if (i
== 7) {
2051 target_read_u32(target
, MVFR0
, &mvfr0
);
2052 target_read_u32(target
, MVFR1
, &mvfr1
);
2054 /* test for floating point features on Cortex-M7 */
2055 if ((mvfr0
== MVFR0_DEFAULT_M7_SP
) && (mvfr1
== MVFR1_DEFAULT_M7_SP
)) {
2056 LOG_DEBUG("Cortex-M%d floating point feature FPv5_SP found", i
);
2057 armv7m
->fp_feature
= FPv5_SP
;
2058 } else if ((mvfr0
== MVFR0_DEFAULT_M7_DP
) && (mvfr1
== MVFR1_DEFAULT_M7_DP
)) {
2059 LOG_DEBUG("Cortex-M%d floating point feature FPv5_DP found", i
);
2060 armv7m
->fp_feature
= FPv5_DP
;
2062 } else if (i
== 0) {
2063 /* Cortex-M0 does not support unaligned memory access */
2064 armv7m
->arm
.is_armv6m
= true;
2067 if (armv7m
->fp_feature
== FP_NONE
&&
2068 armv7m
->arm
.core_cache
->num_regs
> ARMV7M_NUM_CORE_REGS_NOFP
) {
2069 /* free unavailable FPU registers */
2072 for (idx
= ARMV7M_NUM_CORE_REGS_NOFP
;
2073 idx
< armv7m
->arm
.core_cache
->num_regs
;
2075 free(armv7m
->arm
.core_cache
->reg_list
[idx
].value
);
2076 free(armv7m
->arm
.core_cache
->reg_list
[idx
].feature
);
2077 free(armv7m
->arm
.core_cache
->reg_list
[idx
].reg_data_type
);
2079 armv7m
->arm
.core_cache
->num_regs
= ARMV7M_NUM_CORE_REGS_NOFP
;
2082 if (!armv7m
->stlink
) {
2083 if (i
== 3 || i
== 4)
2084 /* Cortex-M3/M4 have 4096 bytes autoincrement range,
2085 * s. ARM IHI 0031C: MEM-AP 7.2.2 */
2086 armv7m
->debug_ap
->tar_autoincr_block
= (1 << 12);
2088 /* Cortex-M7 has only 1024 bytes autoincrement range */
2089 armv7m
->debug_ap
->tar_autoincr_block
= (1 << 10);
2092 /* Configure trace modules */
2093 retval
= target_write_u32(target
, DCB_DEMCR
, TRCENA
| armv7m
->demcr
);
2094 if (retval
!= ERROR_OK
)
2097 if (armv7m
->trace_config
.config_type
!= TRACE_CONFIG_TYPE_DISABLED
) {
2098 armv7m_trace_tpiu_config(target
);
2099 armv7m_trace_itm_config(target
);
2102 /* NOTE: FPB and DWT are both optional. */
2105 target_read_u32(target
, FP_CTRL
, &fpcr
);
2106 /* bits [14:12] and [7:4] */
2107 cortex_m
->fp_num_code
= ((fpcr
>> 8) & 0x70) | ((fpcr
>> 4) & 0xF);
2108 cortex_m
->fp_num_lit
= (fpcr
>> 8) & 0xF;
2109 /* Detect flash patch revision, see RM DDI 0403E.b page C1-817.
2110 Revision is zero base, fp_rev == 1 means Rev.2 ! */
2111 cortex_m
->fp_rev
= (fpcr
>> 28) & 0xf;
2112 free(cortex_m
->fp_comparator_list
);
2113 cortex_m
->fp_comparator_list
= calloc(
2114 cortex_m
->fp_num_code
+ cortex_m
->fp_num_lit
,
2115 sizeof(struct cortex_m_fp_comparator
));
2116 cortex_m
->fpb_enabled
= fpcr
& 1;
2117 for (i
= 0; i
< cortex_m
->fp_num_code
+ cortex_m
->fp_num_lit
; i
++) {
2118 cortex_m
->fp_comparator_list
[i
].type
=
2119 (i
< cortex_m
->fp_num_code
) ? FPCR_CODE
: FPCR_LITERAL
;
2120 cortex_m
->fp_comparator_list
[i
].fpcr_address
= FP_COMP0
+ 4 * i
;
2122 /* make sure we clear any breakpoints enabled on the target */
2123 target_write_u32(target
, cortex_m
->fp_comparator_list
[i
].fpcr_address
, 0);
2125 LOG_DEBUG("FPB fpcr 0x%" PRIx32
", numcode %i, numlit %i",
2127 cortex_m
->fp_num_code
,
2128 cortex_m
->fp_num_lit
);
2131 cortex_m_dwt_free(target
);
2132 cortex_m_dwt_setup(cortex_m
, target
);
2134 /* These hardware breakpoints only work for code in flash! */
2135 LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
2136 target_name(target
),
2137 cortex_m
->fp_num_code
,
2138 cortex_m
->dwt_num_comp
);
2144 static int cortex_m_dcc_read(struct target
*target
, uint8_t *value
, uint8_t *ctrl
)
2146 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
2151 retval
= mem_ap_read_buf_noincr(armv7m
->debug_ap
, buf
, 2, 1, DCB_DCRDR
);
2152 if (retval
!= ERROR_OK
)
2155 dcrdr
= target_buffer_get_u16(target
, buf
);
2156 *ctrl
= (uint8_t)dcrdr
;
2157 *value
= (uint8_t)(dcrdr
>> 8);
2159 LOG_DEBUG("data 0x%x ctrl 0x%x", *value
, *ctrl
);
2161 /* write ack back to software dcc register
2162 * signify we have read data */
2163 if (dcrdr
& (1 << 0)) {
2164 target_buffer_set_u16(target
, buf
, 0);
2165 retval
= mem_ap_write_buf_noincr(armv7m
->debug_ap
, buf
, 2, 1, DCB_DCRDR
);
2166 if (retval
!= ERROR_OK
)
2173 static int cortex_m_target_request_data(struct target
*target
,
2174 uint32_t size
, uint8_t *buffer
)
2180 for (i
= 0; i
< (size
* 4); i
++) {
2181 int retval
= cortex_m_dcc_read(target
, &data
, &ctrl
);
2182 if (retval
!= ERROR_OK
)
2190 static int cortex_m_handle_target_request(void *priv
)
2192 struct target
*target
= priv
;
2193 if (!target_was_examined(target
))
2196 if (!target
->dbg_msg_enabled
)
2199 if (target
->state
== TARGET_RUNNING
) {
2204 retval
= cortex_m_dcc_read(target
, &data
, &ctrl
);
2205 if (retval
!= ERROR_OK
)
2208 /* check if we have data */
2209 if (ctrl
& (1 << 0)) {
2212 /* we assume target is quick enough */
2214 for (int i
= 1; i
<= 3; i
++) {
2215 retval
= cortex_m_dcc_read(target
, &data
, &ctrl
);
2216 if (retval
!= ERROR_OK
)
2218 request
|= ((uint32_t)data
<< (i
* 8));
2220 target_request(target
, request
);
2227 static int cortex_m_init_arch_info(struct target
*target
,
2228 struct cortex_m_common
*cortex_m
, struct adiv5_dap
*dap
)
2230 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
2232 armv7m_init_arch_info(target
, armv7m
);
2234 /* default reset mode is to use srst if fitted
2235 * if not it will use CORTEX_M3_RESET_VECTRESET */
2236 cortex_m
->soft_reset_config
= CORTEX_M_RESET_VECTRESET
;
2238 armv7m
->arm
.dap
= dap
;
2240 /* register arch-specific functions */
2241 armv7m
->examine_debug_reason
= cortex_m_examine_debug_reason
;
2243 armv7m
->post_debug_entry
= NULL
;
2245 armv7m
->pre_restore_context
= NULL
;
2247 armv7m
->load_core_reg_u32
= cortex_m_load_core_reg_u32
;
2248 armv7m
->store_core_reg_u32
= cortex_m_store_core_reg_u32
;
2250 target_register_timer_callback(cortex_m_handle_target_request
, 1,
2251 TARGET_TIMER_TYPE_PERIODIC
, target
);
2256 static int cortex_m_target_create(struct target
*target
, Jim_Interp
*interp
)
2258 struct adiv5_private_config
*pc
;
2260 pc
= (struct adiv5_private_config
*)target
->private_config
;
2261 if (adiv5_verify_config(pc
) != ERROR_OK
)
2264 struct cortex_m_common
*cortex_m
= calloc(1, sizeof(struct cortex_m_common
));
2265 if (cortex_m
== NULL
) {
2266 LOG_ERROR("No memory creating target");
2270 cortex_m
->common_magic
= CORTEX_M_COMMON_MAGIC
;
2271 cortex_m
->apsel
= pc
->ap_num
;
2273 cortex_m_init_arch_info(target
, cortex_m
, pc
->dap
);
2278 /*--------------------------------------------------------------------------*/
2280 static int cortex_m_verify_pointer(struct command_context
*cmd_ctx
,
2281 struct cortex_m_common
*cm
)
2283 if (cm
->common_magic
!= CORTEX_M_COMMON_MAGIC
) {
2284 command_print(cmd_ctx
, "target is not a Cortex-M");
2285 return ERROR_TARGET_INVALID
;
2291 * Only stuff below this line should need to verify that its target
2292 * is a Cortex-M3. Everything else should have indirected through the
2293 * cortexm3_target structure, which is only used with CM3 targets.
2296 COMMAND_HANDLER(handle_cortex_m_vector_catch_command
)
2298 struct target
*target
= get_current_target(CMD_CTX
);
2299 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
2300 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
2304 static const struct {
2308 { "hard_err", VC_HARDERR
, },
2309 { "int_err", VC_INTERR
, },
2310 { "bus_err", VC_BUSERR
, },
2311 { "state_err", VC_STATERR
, },
2312 { "chk_err", VC_CHKERR
, },
2313 { "nocp_err", VC_NOCPERR
, },
2314 { "mm_err", VC_MMERR
, },
2315 { "reset", VC_CORERESET
, },
2318 retval
= cortex_m_verify_pointer(CMD_CTX
, cortex_m
);
2319 if (retval
!= ERROR_OK
)
2322 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DEMCR
, &demcr
);
2323 if (retval
!= ERROR_OK
)
2329 if (CMD_ARGC
== 1) {
2330 if (strcmp(CMD_ARGV
[0], "all") == 0) {
2331 catch = VC_HARDERR
| VC_INTERR
| VC_BUSERR
2332 | VC_STATERR
| VC_CHKERR
| VC_NOCPERR
2333 | VC_MMERR
| VC_CORERESET
;
2335 } else if (strcmp(CMD_ARGV
[0], "none") == 0)
2338 while (CMD_ARGC
-- > 0) {
2340 for (i
= 0; i
< ARRAY_SIZE(vec_ids
); i
++) {
2341 if (strcmp(CMD_ARGV
[CMD_ARGC
], vec_ids
[i
].name
) != 0)
2343 catch |= vec_ids
[i
].mask
;
2346 if (i
== ARRAY_SIZE(vec_ids
)) {
2347 LOG_ERROR("No CM3 vector '%s'", CMD_ARGV
[CMD_ARGC
]);
2348 return ERROR_COMMAND_SYNTAX_ERROR
;
2352 /* For now, armv7m->demcr only stores vector catch flags. */
2353 armv7m
->demcr
= catch;
2358 /* write, but don't assume it stuck (why not??) */
2359 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DEMCR
, demcr
);
2360 if (retval
!= ERROR_OK
)
2362 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DEMCR
, &demcr
);
2363 if (retval
!= ERROR_OK
)
2366 /* FIXME be sure to clear DEMCR on clean server shutdown.
2367 * Otherwise the vector catch hardware could fire when there's
2368 * no debugger hooked up, causing much confusion...
2372 for (unsigned i
= 0; i
< ARRAY_SIZE(vec_ids
); i
++) {
2373 command_print(CMD_CTX
, "%9s: %s", vec_ids
[i
].name
,
2374 (demcr
& vec_ids
[i
].mask
) ? "catch" : "ignore");
2380 COMMAND_HANDLER(handle_cortex_m_mask_interrupts_command
)
2382 struct target
*target
= get_current_target(CMD_CTX
);
2383 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
2386 static const Jim_Nvp nvp_maskisr_modes
[] = {
2387 { .name
= "auto", .value
= CORTEX_M_ISRMASK_AUTO
},
2388 { .name
= "off", .value
= CORTEX_M_ISRMASK_OFF
},
2389 { .name
= "on", .value
= CORTEX_M_ISRMASK_ON
},
2390 { .name
= NULL
, .value
= -1 },
2395 retval
= cortex_m_verify_pointer(CMD_CTX
, cortex_m
);
2396 if (retval
!= ERROR_OK
)
2399 if (target
->state
!= TARGET_HALTED
) {
2400 command_print(CMD_CTX
, "target must be stopped for \"%s\" command", CMD_NAME
);
2405 n
= Jim_Nvp_name2value_simple(nvp_maskisr_modes
, CMD_ARGV
[0]);
2406 if (n
->name
== NULL
)
2407 return ERROR_COMMAND_SYNTAX_ERROR
;
2408 cortex_m
->isrmasking_mode
= n
->value
;
2411 if (cortex_m
->isrmasking_mode
== CORTEX_M_ISRMASK_ON
)
2412 cortex_m_write_debug_halt_mask(target
, C_HALT
| C_MASKINTS
, 0);
2414 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_MASKINTS
);
2417 n
= Jim_Nvp_value2name_simple(nvp_maskisr_modes
, cortex_m
->isrmasking_mode
);
2418 command_print(CMD_CTX
, "cortex_m interrupt mask %s", n
->name
);
2423 COMMAND_HANDLER(handle_cortex_m_reset_config_command
)
2425 struct target
*target
= get_current_target(CMD_CTX
);
2426 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
2430 retval
= cortex_m_verify_pointer(CMD_CTX
, cortex_m
);
2431 if (retval
!= ERROR_OK
)
2435 if (strcmp(*CMD_ARGV
, "sysresetreq") == 0)
2436 cortex_m
->soft_reset_config
= CORTEX_M_RESET_SYSRESETREQ
;
2438 else if (strcmp(*CMD_ARGV
, "vectreset") == 0) {
2439 if (target_was_examined(target
)
2440 && !cortex_m
->vectreset_supported
)
2441 LOG_WARNING("VECTRESET is not supported on your Cortex-M core!");
2443 cortex_m
->soft_reset_config
= CORTEX_M_RESET_VECTRESET
;
2446 return ERROR_COMMAND_SYNTAX_ERROR
;
2449 switch (cortex_m
->soft_reset_config
) {
2450 case CORTEX_M_RESET_SYSRESETREQ
:
2451 reset_config
= "sysresetreq";
2454 case CORTEX_M_RESET_VECTRESET
:
2455 reset_config
= "vectreset";
2459 reset_config
= "unknown";
2463 command_print(CMD_CTX
, "cortex_m reset_config %s", reset_config
);
2468 static const struct command_registration cortex_m_exec_command_handlers
[] = {
2471 .handler
= handle_cortex_m_mask_interrupts_command
,
2472 .mode
= COMMAND_EXEC
,
2473 .help
= "mask cortex_m interrupts",
2474 .usage
= "['auto'|'on'|'off']",
2477 .name
= "vector_catch",
2478 .handler
= handle_cortex_m_vector_catch_command
,
2479 .mode
= COMMAND_EXEC
,
2480 .help
= "configure hardware vectors to trigger debug entry",
2481 .usage
= "['all'|'none'|('bus_err'|'chk_err'|...)*]",
2484 .name
= "reset_config",
2485 .handler
= handle_cortex_m_reset_config_command
,
2486 .mode
= COMMAND_ANY
,
2487 .help
= "configure software reset handling",
2488 .usage
= "['sysresetreq'|'vectreset']",
2490 COMMAND_REGISTRATION_DONE
2492 static const struct command_registration cortex_m_command_handlers
[] = {
2494 .chain
= armv7m_command_handlers
,
2497 .chain
= armv7m_trace_command_handlers
,
2501 .mode
= COMMAND_EXEC
,
2502 .help
= "Cortex-M command group",
2504 .chain
= cortex_m_exec_command_handlers
,
2506 COMMAND_REGISTRATION_DONE
2509 struct target_type cortexm_target
= {
2511 .deprecated_name
= "cortex_m3",
2513 .poll
= cortex_m_poll
,
2514 .arch_state
= armv7m_arch_state
,
2516 .target_request_data
= cortex_m_target_request_data
,
2518 .halt
= cortex_m_halt
,
2519 .resume
= cortex_m_resume
,
2520 .step
= cortex_m_step
,
2522 .assert_reset
= cortex_m_assert_reset
,
2523 .deassert_reset
= cortex_m_deassert_reset
,
2524 .soft_reset_halt
= cortex_m_soft_reset_halt
,
2526 .get_gdb_arch
= arm_get_gdb_arch
,
2527 .get_gdb_reg_list
= armv7m_get_gdb_reg_list
,
2529 .read_memory
= cortex_m_read_memory
,
2530 .write_memory
= cortex_m_write_memory
,
2531 .checksum_memory
= armv7m_checksum_memory
,
2532 .blank_check_memory
= armv7m_blank_check_memory
,
2534 .run_algorithm
= armv7m_run_algorithm
,
2535 .start_algorithm
= armv7m_start_algorithm
,
2536 .wait_algorithm
= armv7m_wait_algorithm
,
2538 .add_breakpoint
= cortex_m_add_breakpoint
,
2539 .remove_breakpoint
= cortex_m_remove_breakpoint
,
2540 .add_watchpoint
= cortex_m_add_watchpoint
,
2541 .remove_watchpoint
= cortex_m_remove_watchpoint
,
2543 .commands
= cortex_m_command_handlers
,
2544 .target_create
= cortex_m_target_create
,
2545 .target_jim_configure
= adiv5_jim_configure
,
2546 .init_target
= cortex_m_init_target
,
2547 .examine
= cortex_m_examine
,
2548 .deinit_target
= cortex_m_deinit_target
,
2550 .profiling
= cortex_m_profiling
,
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)