Code Review / openocd.git / blob
? search:
summary | shortlog | log | commit | commitdiff | review | tree
history | raw | HEAD
cortex_m: allow setting debug ap during create
[openocd.git] / src / target / cortex_m.c
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * Copyright (C) 2006 by Magnus Lundin *
6 * lundin@mlu.mine.nu *
7 * *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
10 * *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
15 * *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
20 * *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
23 * *
24 * *
25 * Cortex-M3(tm) TRM, ARM DDI 0337E (r1p1) and 0337G (r2p0) *
26 * *
27 ***************************************************************************/
28 #ifdef HAVE_CONFIG_H
29 #include "config.h"
30 #endif
31
32 #include "jtag/interface.h"
33 #include "breakpoints.h"
34 #include "cortex_m.h"
35 #include "target_request.h"
36 #include "target_type.h"
37 #include "arm_disassembler.h"
38 #include "register.h"
39 #include "arm_opcodes.h"
40 #include "arm_semihosting.h"
41 #include <helper/time_support.h>
42
43 /* NOTE: most of this should work fine for the Cortex-M1 and
44 * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M.
45 * Some differences: M0/M1 doesn't have FBP remapping or the
46 * DWT tracing/profiling support. (So the cycle counter will
47 * not be usable; the other stuff isn't currently used here.)
48 *
49 * Although there are some workarounds for errata seen only in r0p0
50 * silicon, such old parts are hard to find and thus not much tested
51 * any longer.
52 */
53
54 /**
55 * Returns the type of a break point required by address location
56 */
57 #define BKPT_TYPE_BY_ADDR(addr) ((addr) < 0x20000000 ? BKPT_HARD : BKPT_SOFT)
58
59 /* forward declarations */
60 static int cortex_m_store_core_reg_u32(struct target *target,
61 uint32_t num, uint32_t value);
62 static void cortex_m_dwt_free(struct target *target);
63
64 static int cortexm_dap_read_coreregister_u32(struct target *target,
65 uint32_t *value, int regnum)
66 {
67 struct armv7m_common *armv7m = target_to_armv7m(target);
68 int retval;
69 uint32_t dcrdr;
70
71 /* because the DCB_DCRDR is used for the emulated dcc channel
72 * we have to save/restore the DCB_DCRDR when used */
73 if (target->dbg_msg_enabled) {
74 retval = mem_ap_read_u32(armv7m->debug_ap, DCB_DCRDR, &dcrdr);
75 if (retval != ERROR_OK)
76 return retval;
77 }
78
79 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DCRSR, regnum);
80 if (retval != ERROR_OK)
81 return retval;
82
83 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DCRDR, value);
84 if (retval != ERROR_OK)
85 return retval;
86
87 if (target->dbg_msg_enabled) {
88 /* restore DCB_DCRDR - this needs to be in a separate
89 * transaction otherwise the emulated DCC channel breaks */
90 if (retval == ERROR_OK)
91 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DCRDR, dcrdr);
92 }
93
94 return retval;
95 }
96
97 static int cortexm_dap_write_coreregister_u32(struct target *target,
98 uint32_t value, int regnum)
99 {
100 struct armv7m_common *armv7m = target_to_armv7m(target);
101 int retval;
102 uint32_t dcrdr;
103
104 /* because the DCB_DCRDR is used for the emulated dcc channel
105 * we have to save/restore the DCB_DCRDR when used */
106 if (target->dbg_msg_enabled) {
107 retval = mem_ap_read_u32(armv7m->debug_ap, DCB_DCRDR, &dcrdr);
108 if (retval != ERROR_OK)
109 return retval;
110 }
111
112 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DCRDR, value);
113 if (retval != ERROR_OK)
114 return retval;
115
116 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DCRSR, regnum | DCRSR_WnR);
117 if (retval != ERROR_OK)
118 return retval;
119
120 if (target->dbg_msg_enabled) {
121 /* restore DCB_DCRDR - this needs to be in a seperate
122 * transaction otherwise the emulated DCC channel breaks */
123 if (retval == ERROR_OK)
124 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DCRDR, dcrdr);
125 }
126
127 return retval;
128 }
129
130 static int cortex_m_write_debug_halt_mask(struct target *target,
131 uint32_t mask_on, uint32_t mask_off)
132 {
133 struct cortex_m_common *cortex_m = target_to_cm(target);
134 struct armv7m_common *armv7m = &cortex_m->armv7m;
135
136 /* mask off status bits */
137 cortex_m->dcb_dhcsr &= ~((0xFFFF << 16) | mask_off);
138 /* create new register mask */
139 cortex_m->dcb_dhcsr |= DBGKEY | C_DEBUGEN | mask_on;
140
141 return mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DHCSR, cortex_m->dcb_dhcsr);
142 }
143
144 static int cortex_m_clear_halt(struct target *target)
145 {
146 struct cortex_m_common *cortex_m = target_to_cm(target);
147 struct armv7m_common *armv7m = &cortex_m->armv7m;
148 int retval;
149
150 /* clear step if any */
151 cortex_m_write_debug_halt_mask(target, C_HALT, C_STEP);
152
153 /* Read Debug Fault Status Register */
154 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, NVIC_DFSR, &cortex_m->nvic_dfsr);
155 if (retval != ERROR_OK)
156 return retval;
157
158 /* Clear Debug Fault Status */
159 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, NVIC_DFSR, cortex_m->nvic_dfsr);
160 if (retval != ERROR_OK)
161 return retval;
162 LOG_DEBUG(" NVIC_DFSR 0x%" PRIx32 "", cortex_m->nvic_dfsr);
163
164 return ERROR_OK;
165 }
166
167 static int cortex_m_single_step_core(struct target *target)
168 {
169 struct cortex_m_common *cortex_m = target_to_cm(target);
170 struct armv7m_common *armv7m = &cortex_m->armv7m;
171 uint32_t dhcsr_save;
172 int retval;
173
174 /* backup dhcsr reg */
175 dhcsr_save = cortex_m->dcb_dhcsr;
176
177 /* Mask interrupts before clearing halt, if done already. This avoids
178 * Erratum 377497 (fixed in r1p0) where setting MASKINTS while clearing
179 * HALT can put the core into an unknown state.
180 */
181 if (!(cortex_m->dcb_dhcsr & C_MASKINTS)) {
182 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DHCSR,
183 DBGKEY | C_MASKINTS | C_HALT | C_DEBUGEN);
184 if (retval != ERROR_OK)
185 return retval;
186 }
187 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DHCSR,
188 DBGKEY | C_MASKINTS | C_STEP | C_DEBUGEN);
189 if (retval != ERROR_OK)
190 return retval;
191 LOG_DEBUG(" ");
192
193 /* restore dhcsr reg */
194 cortex_m->dcb_dhcsr = dhcsr_save;
195 cortex_m_clear_halt(target);
196
197 return ERROR_OK;
198 }
199
200 static int cortex_m_enable_fpb(struct target *target)
201 {
202 int retval = target_write_u32(target, FP_CTRL, 3);
203 if (retval != ERROR_OK)
204 return retval;
205
206 /* check the fpb is actually enabled */
207 uint32_t fpctrl;
208 retval = target_read_u32(target, FP_CTRL, &fpctrl);
209 if (retval != ERROR_OK)
210 return retval;
211
212 if (fpctrl & 1)
213 return ERROR_OK;
214
215 return ERROR_FAIL;
216 }
217
218 static int cortex_m_endreset_event(struct target *target)
219 {
220 int i;
221 int retval;
222 uint32_t dcb_demcr;
223 struct cortex_m_common *cortex_m = target_to_cm(target);
224 struct armv7m_common *armv7m = &cortex_m->armv7m;
225 struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
226 struct cortex_m_fp_comparator *fp_list = cortex_m->fp_comparator_list;
227 struct cortex_m_dwt_comparator *dwt_list = cortex_m->dwt_comparator_list;
228
229 /* REVISIT The four debug monitor bits are currently ignored... */
230 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DEMCR, &dcb_demcr);
231 if (retval != ERROR_OK)
232 return retval;
233 LOG_DEBUG("DCB_DEMCR = 0x%8.8" PRIx32 "", dcb_demcr);
234
235 /* this register is used for emulated dcc channel */
236 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DCRDR, 0);
237 if (retval != ERROR_OK)
238 return retval;
239
240 /* Enable debug requests */
241 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
242 if (retval != ERROR_OK)
243 return retval;
244 if (!(cortex_m->dcb_dhcsr & C_DEBUGEN)) {
245 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DHCSR, DBGKEY | C_DEBUGEN);
246 if (retval != ERROR_OK)
247 return retval;
248 }
249
250 /* clear any interrupt masking */
251 cortex_m_write_debug_halt_mask(target, 0, C_MASKINTS);
252
253 /* Enable features controlled by ITM and DWT blocks, and catch only
254 * the vectors we were told to pay attention to.
255 *
256 * Target firmware is responsible for all fault handling policy
257 * choices *EXCEPT* explicitly scripted overrides like "vector_catch"
258 * or manual updates to the NVIC SHCSR and CCR registers.
259 */
260 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DEMCR, TRCENA | armv7m->demcr);
261 if (retval != ERROR_OK)
262 return retval;
263
264 /* Paranoia: evidently some (early?) chips don't preserve all the
265 * debug state (including FBP, DWT, etc) across reset...
266 */
267
268 /* Enable FPB */
269 retval = cortex_m_enable_fpb(target);
270 if (retval != ERROR_OK) {
271 LOG_ERROR("Failed to enable the FPB");
272 return retval;
273 }
274
275 cortex_m->fpb_enabled = 1;
276
277 /* Restore FPB registers */
278 for (i = 0; i < cortex_m->fp_num_code + cortex_m->fp_num_lit; i++) {
279 retval = target_write_u32(target, fp_list[i].fpcr_address, fp_list[i].fpcr_value);
280 if (retval != ERROR_OK)
281 return retval;
282 }
283
284 /* Restore DWT registers */
285 for (i = 0; i < cortex_m->dwt_num_comp; i++) {
286 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 0,
287 dwt_list[i].comp);
288 if (retval != ERROR_OK)
289 return retval;
290 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 4,
291 dwt_list[i].mask);
292 if (retval != ERROR_OK)
293 return retval;
294 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 8,
295 dwt_list[i].function);
296 if (retval != ERROR_OK)
297 return retval;
298 }
299 retval = dap_run(swjdp);
300 if (retval != ERROR_OK)
301 return retval;
302
303 register_cache_invalidate(armv7m->arm.core_cache);
304
305 /* make sure we have latest dhcsr flags */
306 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
307
308 return retval;
309 }
310
311 static int cortex_m_examine_debug_reason(struct target *target)
312 {
313 struct cortex_m_common *cortex_m = target_to_cm(target);
314
315 /* THIS IS NOT GOOD, TODO - better logic for detection of debug state reason
316 * only check the debug reason if we don't know it already */
317
318 if ((target->debug_reason != DBG_REASON_DBGRQ)
319 && (target->debug_reason != DBG_REASON_SINGLESTEP)) {
320 if (cortex_m->nvic_dfsr & DFSR_BKPT) {
321 target->debug_reason = DBG_REASON_BREAKPOINT;
322 if (cortex_m->nvic_dfsr & DFSR_DWTTRAP)
323 target->debug_reason = DBG_REASON_WPTANDBKPT;
324 } else if (cortex_m->nvic_dfsr & DFSR_DWTTRAP)
325 target->debug_reason = DBG_REASON_WATCHPOINT;
326 else if (cortex_m->nvic_dfsr & DFSR_VCATCH)
327 target->debug_reason = DBG_REASON_BREAKPOINT;
328 else /* EXTERNAL, HALTED */
329 target->debug_reason = DBG_REASON_UNDEFINED;
330 }
331
332 return ERROR_OK;
333 }
334
335 static int cortex_m_examine_exception_reason(struct target *target)
336 {
337 uint32_t shcsr = 0, except_sr = 0, cfsr = -1, except_ar = -1;
338 struct armv7m_common *armv7m = target_to_armv7m(target);
339 struct adiv5_dap *swjdp = armv7m->arm.dap;
340 int retval;
341
342 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_SHCSR, &shcsr);
343 if (retval != ERROR_OK)
344 return retval;
345 switch (armv7m->exception_number) {
346 case 2: /* NMI */
347 break;
348 case 3: /* Hard Fault */
349 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, NVIC_HFSR, &except_sr);
350 if (retval != ERROR_OK)
351 return retval;
352 if (except_sr & 0x40000000) {
353 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_CFSR, &cfsr);
354 if (retval != ERROR_OK)
355 return retval;
356 }
357 break;
358 case 4: /* Memory Management */
359 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_CFSR, &except_sr);
360 if (retval != ERROR_OK)
361 return retval;
362 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_MMFAR, &except_ar);
363 if (retval != ERROR_OK)
364 return retval;
365 break;
366 case 5: /* Bus Fault */
367 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_CFSR, &except_sr);
368 if (retval != ERROR_OK)
369 return retval;
370 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_BFAR, &except_ar);
371 if (retval != ERROR_OK)
372 return retval;
373 break;
374 case 6: /* Usage Fault */
375 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_CFSR, &except_sr);
376 if (retval != ERROR_OK)
377 return retval;
378 break;
379 case 11: /* SVCall */
380 break;
381 case 12: /* Debug Monitor */
382 retval = mem_ap_read_u32(armv7m->debug_ap, NVIC_DFSR, &except_sr);
383 if (retval != ERROR_OK)
384 return retval;
385 break;
386 case 14: /* PendSV */
387 break;
388 case 15: /* SysTick */
389 break;
390 default:
391 except_sr = 0;
392 break;
393 }
394 retval = dap_run(swjdp);
395 if (retval == ERROR_OK)
396 LOG_DEBUG("%s SHCSR 0x%" PRIx32 ", SR 0x%" PRIx32
397 ", CFSR 0x%" PRIx32 ", AR 0x%" PRIx32,
398 armv7m_exception_string(armv7m->exception_number),
399 shcsr, except_sr, cfsr, except_ar);
400 return retval;
401 }
402
403 static int cortex_m_debug_entry(struct target *target)
404 {
405 int i;
406 uint32_t xPSR;
407 int retval;
408 struct cortex_m_common *cortex_m = target_to_cm(target);
409 struct armv7m_common *armv7m = &cortex_m->armv7m;
410 struct arm *arm = &armv7m->arm;
411 struct reg *r;
412
413 LOG_DEBUG(" ");
414
415 cortex_m_clear_halt(target);
416 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
417 if (retval != ERROR_OK)
418 return retval;
419
420 retval = armv7m->examine_debug_reason(target);
421 if (retval != ERROR_OK)
422 return retval;
423
424 /* Examine target state and mode
425 * First load register accessible through core debug port */
426 int num_regs = arm->core_cache->num_regs;
427
428 for (i = 0; i < num_regs; i++) {
429 r = &armv7m->arm.core_cache->reg_list[i];
430 if (!r->valid)
431 arm->read_core_reg(target, r, i, ARM_MODE_ANY);
432 }
433
434 r = arm->cpsr;
435 xPSR = buf_get_u32(r->value, 0, 32);
436
437 /* For IT instructions xPSR must be reloaded on resume and clear on debug exec */
438 if (xPSR & 0xf00) {
439 r->dirty = r->valid;
440 cortex_m_store_core_reg_u32(target, 16, xPSR & ~0xff);
441 }
442
443 /* Are we in an exception handler */
444 if (xPSR & 0x1FF) {
445 armv7m->exception_number = (xPSR & 0x1FF);
446
447 arm->core_mode = ARM_MODE_HANDLER;
448 arm->map = armv7m_msp_reg_map;
449 } else {
450 unsigned control = buf_get_u32(arm->core_cache
451 ->reg_list[ARMV7M_CONTROL].value, 0, 2);
452
453 /* is this thread privileged? */
454 arm->core_mode = control & 1
455 ? ARM_MODE_USER_THREAD
456 : ARM_MODE_THREAD;
457
458 /* which stack is it using? */
459 if (control & 2)
460 arm->map = armv7m_psp_reg_map;
461 else
462 arm->map = armv7m_msp_reg_map;
463
464 armv7m->exception_number = 0;
465 }
466
467 if (armv7m->exception_number)
468 cortex_m_examine_exception_reason(target);
469
470 LOG_DEBUG("entered debug state in core mode: %s at PC 0x%" PRIx32 ", target->state: %s",
471 arm_mode_name(arm->core_mode),
472 buf_get_u32(arm->pc->value, 0, 32),
473 target_state_name(target));
474
475 if (armv7m->post_debug_entry) {
476 retval = armv7m->post_debug_entry(target);
477 if (retval != ERROR_OK)
478 return retval;
479 }
480
481 return ERROR_OK;
482 }
483
484 static int cortex_m_poll(struct target *target)
485 {
486 int detected_failure = ERROR_OK;
487 int retval = ERROR_OK;
488 enum target_state prev_target_state = target->state;
489 struct cortex_m_common *cortex_m = target_to_cm(target);
490 struct armv7m_common *armv7m = &cortex_m->armv7m;
491
492 /* Read from Debug Halting Control and Status Register */
493 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
494 if (retval != ERROR_OK) {
495 target->state = TARGET_UNKNOWN;
496 return retval;
497 }
498
499 /* Recover from lockup. See ARMv7-M architecture spec,
500 * section B1.5.15 "Unrecoverable exception cases".
501 */
502 if (cortex_m->dcb_dhcsr & S_LOCKUP) {
503 LOG_ERROR("%s -- clearing lockup after double fault",
504 target_name(target));
505 cortex_m_write_debug_halt_mask(target, C_HALT, 0);
506 target->debug_reason = DBG_REASON_DBGRQ;
507
508 /* We have to execute the rest (the "finally" equivalent, but
509 * still throw this exception again).
510 */
511 detected_failure = ERROR_FAIL;
512
513 /* refresh status bits */
514 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
515 if (retval != ERROR_OK)
516 return retval;
517 }
518
519 if (cortex_m->dcb_dhcsr & S_RESET_ST) {
520 target->state = TARGET_RESET;
521 return ERROR_OK;
522 }
523
524 if (target->state == TARGET_RESET) {
525 /* Cannot switch context while running so endreset is
526 * called with target->state == TARGET_RESET
527 */
528 LOG_DEBUG("Exit from reset with dcb_dhcsr 0x%" PRIx32,
529 cortex_m->dcb_dhcsr);
530 retval = cortex_m_endreset_event(target);
531 if (retval != ERROR_OK) {
532 target->state = TARGET_UNKNOWN;
533 return retval;
534 }
535 target->state = TARGET_RUNNING;
536 prev_target_state = TARGET_RUNNING;
537 }
538
539 if (cortex_m->dcb_dhcsr & S_HALT) {
540 target->state = TARGET_HALTED;
541
542 if ((prev_target_state == TARGET_RUNNING) || (prev_target_state == TARGET_RESET)) {
543 retval = cortex_m_debug_entry(target);
544 if (retval != ERROR_OK)
545 return retval;
546
547 if (arm_semihosting(target, &retval) != 0)
548 return retval;
549
550 target_call_event_callbacks(target, TARGET_EVENT_HALTED);
551 }
552 if (prev_target_state == TARGET_DEBUG_RUNNING) {
553 LOG_DEBUG(" ");
554 retval = cortex_m_debug_entry(target);
555 if (retval != ERROR_OK)
556 return retval;
557
558 target_call_event_callbacks(target, TARGET_EVENT_DEBUG_HALTED);
559 }
560 }
561
562 /* REVISIT when S_SLEEP is set, it's in a Sleep or DeepSleep state.
563 * How best to model low power modes?
564 */
565
566 if (target->state == TARGET_UNKNOWN) {
567 /* check if processor is retiring instructions */
568 if (cortex_m->dcb_dhcsr & S_RETIRE_ST) {
569 target->state = TARGET_RUNNING;
570 retval = ERROR_OK;
571 }
572 }
573
574 /* Did we detect a failure condition that we cleared? */
575 if (detected_failure != ERROR_OK)
576 retval = detected_failure;
577 return retval;
578 }
579
580 static int cortex_m_halt(struct target *target)
581 {
582 LOG_DEBUG("target->state: %s",
583 target_state_name(target));
584
585 if (target->state == TARGET_HALTED) {
586 LOG_DEBUG("target was already halted");
587 return ERROR_OK;
588 }
589
590 if (target->state == TARGET_UNKNOWN)
591 LOG_WARNING("target was in unknown state when halt was requested");
592
593 if (target->state == TARGET_RESET) {
594 if ((jtag_get_reset_config() & RESET_SRST_PULLS_TRST) && jtag_get_srst()) {
595 LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
596 return ERROR_TARGET_FAILURE;
597 } else {
598 /* we came here in a reset_halt or reset_init sequence
599 * debug entry was already prepared in cortex_m3_assert_reset()
600 */
601 target->debug_reason = DBG_REASON_DBGRQ;
602
603 return ERROR_OK;
604 }
605 }
606
607 /* Write to Debug Halting Control and Status Register */
608 cortex_m_write_debug_halt_mask(target, C_HALT, 0);
609
610 target->debug_reason = DBG_REASON_DBGRQ;
611
612 return ERROR_OK;
613 }
614
615 static int cortex_m_soft_reset_halt(struct target *target)
616 {
617 struct cortex_m_common *cortex_m = target_to_cm(target);
618 struct armv7m_common *armv7m = &cortex_m->armv7m;
619 uint32_t dcb_dhcsr = 0;
620 int retval, timeout = 0;
621
622 /* soft_reset_halt is deprecated on cortex_m as the same functionality
623 * can be obtained by using 'reset halt' and 'cortex_m reset_config vectreset'
624 * As this reset only used VC_CORERESET it would only ever reset the cortex_m
625 * core, not the peripherals */
626 LOG_WARNING("soft_reset_halt is deprecated, please use 'reset halt' instead.");
627
628 /* Enter debug state on reset; restore DEMCR in endreset_event() */
629 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DEMCR,
630 TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
631 if (retval != ERROR_OK)
632 return retval;
633
634 /* Request a core-only reset */
635 retval = mem_ap_write_atomic_u32(armv7m->debug_ap, NVIC_AIRCR,
636 AIRCR_VECTKEY | AIRCR_VECTRESET);
637 if (retval != ERROR_OK)
638 return retval;
639 target->state = TARGET_RESET;
640
641 /* registers are now invalid */
642 register_cache_invalidate(cortex_m->armv7m.arm.core_cache);
643
644 while (timeout < 100) {
645 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &dcb_dhcsr);
646 if (retval == ERROR_OK) {
647 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, NVIC_DFSR,
648 &cortex_m->nvic_dfsr);
649 if (retval != ERROR_OK)
650 return retval;
651 if ((dcb_dhcsr & S_HALT)
652 && (cortex_m->nvic_dfsr & DFSR_VCATCH)) {
653 LOG_DEBUG("system reset-halted, DHCSR 0x%08x, "
654 "DFSR 0x%08x",
655 (unsigned) dcb_dhcsr,
656 (unsigned) cortex_m->nvic_dfsr);
657 cortex_m_poll(target);
658 /* FIXME restore user's vector catch config */
659 return ERROR_OK;
660 } else
661 LOG_DEBUG("waiting for system reset-halt, "
662 "DHCSR 0x%08x, %d ms",
663 (unsigned) dcb_dhcsr, timeout);
664 }
665 timeout++;
666 alive_sleep(1);
667 }
668
669 return ERROR_OK;
670 }
671
672 void cortex_m_enable_breakpoints(struct target *target)
673 {
674 struct breakpoint *breakpoint = target->breakpoints;
675
676 /* set any pending breakpoints */
677 while (breakpoint) {
678 if (!breakpoint->set)
679 cortex_m_set_breakpoint(target, breakpoint);
680 breakpoint = breakpoint->next;
681 }
682 }
683
684 static int cortex_m_resume(struct target *target, int current,
685 uint32_t address, int handle_breakpoints, int debug_execution)
686 {
687 struct armv7m_common *armv7m = target_to_armv7m(target);
688 struct breakpoint *breakpoint = NULL;
689 uint32_t resume_pc;
690 struct reg *r;
691
692 if (target->state != TARGET_HALTED) {
693 LOG_WARNING("target not halted");
694 return ERROR_TARGET_NOT_HALTED;
695 }
696
697 if (!debug_execution) {
698 target_free_all_working_areas(target);
699 cortex_m_enable_breakpoints(target);
700 cortex_m_enable_watchpoints(target);
701 }
702
703 if (debug_execution) {
704 r = armv7m->arm.core_cache->reg_list + ARMV7M_PRIMASK;
705
706 /* Disable interrupts */
707 /* We disable interrupts in the PRIMASK register instead of
708 * masking with C_MASKINTS. This is probably the same issue
709 * as Cortex-M3 Erratum 377493 (fixed in r1p0): C_MASKINTS
710 * in parallel with disabled interrupts can cause local faults
711 * to not be taken.
712 *
713 * REVISIT this clearly breaks non-debug execution, since the
714 * PRIMASK register state isn't saved/restored... workaround
715 * by never resuming app code after debug execution.
716 */
717 buf_set_u32(r->value, 0, 1, 1);
718 r->dirty = true;
719 r->valid = true;
720
721 /* Make sure we are in Thumb mode */
722 r = armv7m->arm.cpsr;
723 buf_set_u32(r->value, 24, 1, 1);
724 r->dirty = true;
725 r->valid = true;
726 }
727
728 /* current = 1: continue on current pc, otherwise continue at <address> */
729 r = armv7m->arm.pc;
730 if (!current) {
731 buf_set_u32(r->value, 0, 32, address);
732 r->dirty = true;
733 r->valid = true;
734 }
735
736 /* if we halted last time due to a bkpt instruction
737 * then we have to manually step over it, otherwise
738 * the core will break again */
739
740 if (!breakpoint_find(target, buf_get_u32(r->value, 0, 32))
741 && !debug_execution)
742 armv7m_maybe_skip_bkpt_inst(target, NULL);
743
744 resume_pc = buf_get_u32(r->value, 0, 32);
745
746 armv7m_restore_context(target);
747
748 /* the front-end may request us not to handle breakpoints */
749 if (handle_breakpoints) {
750 /* Single step past breakpoint at current address */
751 breakpoint = breakpoint_find(target, resume_pc);
752 if (breakpoint) {
753 LOG_DEBUG("unset breakpoint at 0x%8.8" PRIx32 " (ID: %" PRIu32 ")",
754 breakpoint->address,
755 breakpoint->unique_id);
756 cortex_m_unset_breakpoint(target, breakpoint);
757 cortex_m_single_step_core(target);
758 cortex_m_set_breakpoint(target, breakpoint);
759 }
760 }
761
762 /* Restart core */
763 cortex_m_write_debug_halt_mask(target, 0, C_HALT);
764
765 target->debug_reason = DBG_REASON_NOTHALTED;
766
767 /* registers are now invalid */
768 register_cache_invalidate(armv7m->arm.core_cache);
769
770 if (!debug_execution) {
771 target->state = TARGET_RUNNING;
772 target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
773 LOG_DEBUG("target resumed at 0x%" PRIx32 "", resume_pc);
774 } else {
775 target->state = TARGET_DEBUG_RUNNING;
776 target_call_event_callbacks(target, TARGET_EVENT_DEBUG_RESUMED);
777 LOG_DEBUG("target debug resumed at 0x%" PRIx32 "", resume_pc);
778 }
779
780 return ERROR_OK;
781 }
782
783 /* int irqstepcount = 0; */
784 static int cortex_m_step(struct target *target, int current,
785 uint32_t address, int handle_breakpoints)
786 {
787 struct cortex_m_common *cortex_m = target_to_cm(target);
788 struct armv7m_common *armv7m = &cortex_m->armv7m;
789 struct breakpoint *breakpoint = NULL;
790 struct reg *pc = armv7m->arm.pc;
791 bool bkpt_inst_found = false;
792 int retval;
793 bool isr_timed_out = false;
794
795 if (target->state != TARGET_HALTED) {
796 LOG_WARNING("target not halted");
797 return ERROR_TARGET_NOT_HALTED;
798 }
799
800 /* current = 1: continue on current pc, otherwise continue at <address> */
801 if (!current)
802 buf_set_u32(pc->value, 0, 32, address);
803
804 uint32_t pc_value = buf_get_u32(pc->value, 0, 32);
805
806 /* the front-end may request us not to handle breakpoints */
807 if (handle_breakpoints) {
808 breakpoint = breakpoint_find(target, pc_value);
809 if (breakpoint)
810 cortex_m_unset_breakpoint(target, breakpoint);
811 }
812
813 armv7m_maybe_skip_bkpt_inst(target, &bkpt_inst_found);
814
815 target->debug_reason = DBG_REASON_SINGLESTEP;
816
817 armv7m_restore_context(target);
818
819 target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
820
821 /* if no bkpt instruction is found at pc then we can perform
822 * a normal step, otherwise we have to manually step over the bkpt
823 * instruction - as such simulate a step */
824 if (bkpt_inst_found == false) {
825 /* Automatic ISR masking mode off: Just step over the next instruction */
826 if ((cortex_m->isrmasking_mode != CORTEX_M_ISRMASK_AUTO))
827 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
828 else {
829 /* Process interrupts during stepping in a way they don't interfere
830 * debugging.
831 *
832 * Principle:
833 *
834 * Set a temporary break point at the current pc and let the core run
835 * with interrupts enabled. Pending interrupts get served and we run
836 * into the breakpoint again afterwards. Then we step over the next
837 * instruction with interrupts disabled.
838 *
839 * If the pending interrupts don't complete within time, we leave the
840 * core running. This may happen if the interrupts trigger faster
841 * than the core can process them or the handler doesn't return.
842 *
843 * If no more breakpoints are available we simply do a step with
844 * interrupts enabled.
845 *
846 */
847
848 /* 2012-09-29 ph
849 *
850 * If a break point is already set on the lower half word then a break point on
851 * the upper half word will not break again when the core is restarted. So we
852 * just step over the instruction with interrupts disabled.
853 *
854 * The documentation has no information about this, it was found by observation
855 * on STM32F1 and STM32F2. Proper explanation welcome. STM32F0 dosen't seem to
856 * suffer from this problem.
857 *
858 * To add some confusion: pc_value has bit 0 always set, while the breakpoint
859 * address has it always cleared. The former is done to indicate thumb mode
860 * to gdb.
861 *
862 */
863 if ((pc_value & 0x02) && breakpoint_find(target, pc_value & ~0x03)) {
864 LOG_DEBUG("Stepping over next instruction with interrupts disabled");
865 cortex_m_write_debug_halt_mask(target, C_HALT | C_MASKINTS, 0);
866 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
867 /* Re-enable interrupts */
868 cortex_m_write_debug_halt_mask(target, C_HALT, C_MASKINTS);
869 }
870 else {
871
872 /* Set a temporary break point */
873 if (breakpoint)
874 retval = cortex_m_set_breakpoint(target, breakpoint);
875 else
876 retval = breakpoint_add(target, pc_value, 2, BKPT_TYPE_BY_ADDR(pc_value));
877 bool tmp_bp_set = (retval == ERROR_OK);
878
879 /* No more breakpoints left, just do a step */
880 if (!tmp_bp_set)
881 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
882 else {
883 /* Start the core */
884 LOG_DEBUG("Starting core to serve pending interrupts");
885 int64_t t_start = timeval_ms();
886 cortex_m_write_debug_halt_mask(target, 0, C_HALT | C_STEP);
887
888 /* Wait for pending handlers to complete or timeout */
889 do {
890 retval = mem_ap_read_atomic_u32(armv7m->debug_ap,
891 DCB_DHCSR,
892 &cortex_m->dcb_dhcsr);
893 if (retval != ERROR_OK) {
894 target->state = TARGET_UNKNOWN;
895 return retval;
896 }
897 isr_timed_out = ((timeval_ms() - t_start) > 500);
898 } while (!((cortex_m->dcb_dhcsr & S_HALT) || isr_timed_out));
899
900 /* only remove breakpoint if we created it */
901 if (breakpoint)
902 cortex_m_unset_breakpoint(target, breakpoint);
903 else {
904 /* Remove the temporary breakpoint */
905 breakpoint_remove(target, pc_value);
906 }
907
908 if (isr_timed_out) {
909 LOG_DEBUG("Interrupt handlers didn't complete within time, "
910 "leaving target running");
911 } else {
912 /* Step over next instruction with interrupts disabled */
913 cortex_m_write_debug_halt_mask(target,
914 C_HALT | C_MASKINTS,
915 0);
916 cortex_m_write_debug_halt_mask(target, C_STEP, C_HALT);
917 /* Re-enable interrupts */
918 cortex_m_write_debug_halt_mask(target, C_HALT, C_MASKINTS);
919 }
920 }
921 }
922 }
923 }
924
925 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
926 if (retval != ERROR_OK)
927 return retval;
928
929 /* registers are now invalid */
930 register_cache_invalidate(armv7m->arm.core_cache);
931
932 if (breakpoint)
933 cortex_m_set_breakpoint(target, breakpoint);
934
935 if (isr_timed_out) {
936 /* Leave the core running. The user has to stop execution manually. */
937 target->debug_reason = DBG_REASON_NOTHALTED;
938 target->state = TARGET_RUNNING;
939 return ERROR_OK;
940 }
941
942 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
943 " nvic_icsr = 0x%" PRIx32,
944 cortex_m->dcb_dhcsr, cortex_m->nvic_icsr);
945
946 retval = cortex_m_debug_entry(target);
947 if (retval != ERROR_OK)
948 return retval;
949 target_call_event_callbacks(target, TARGET_EVENT_HALTED);
950
951 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
952 " nvic_icsr = 0x%" PRIx32,
953 cortex_m->dcb_dhcsr, cortex_m->nvic_icsr);
954
955 return ERROR_OK;
956 }
957
958 static int cortex_m_assert_reset(struct target *target)
959 {
960 struct cortex_m_common *cortex_m = target_to_cm(target);
961 struct armv7m_common *armv7m = &cortex_m->armv7m;
962 enum cortex_m_soft_reset_config reset_config = cortex_m->soft_reset_config;
963
964 LOG_DEBUG("target->state: %s",
965 target_state_name(target));
966
967 enum reset_types jtag_reset_config = jtag_get_reset_config();
968
969 if (target_has_event_action(target, TARGET_EVENT_RESET_ASSERT)) {
970 /* allow scripts to override the reset event */
971
972 target_handle_event(target, TARGET_EVENT_RESET_ASSERT);
973 register_cache_invalidate(cortex_m->armv7m.arm.core_cache);
974 target->state = TARGET_RESET;
975
976 return ERROR_OK;
977 }
978
979 /* some cores support connecting while srst is asserted
980 * use that mode is it has been configured */
981
982 bool srst_asserted = false;
983
984 if (!target_was_examined(target)) {
985 if (jtag_reset_config & RESET_HAS_SRST) {
986 adapter_assert_reset();
987 if (target->reset_halt)
988 LOG_ERROR("Target not examined, will not halt after reset!");
989 return ERROR_OK;
990 } else {
991 LOG_ERROR("Target not examined, reset NOT asserted!");
992 return ERROR_FAIL;
993 }
994 }
995
996 if ((jtag_reset_config & RESET_HAS_SRST) &&
997 (jtag_reset_config & RESET_SRST_NO_GATING)) {
998 adapter_assert_reset();
999 srst_asserted = true;
1000 }
1001
1002 /* Enable debug requests */
1003 int retval;
1004 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DHCSR, &cortex_m->dcb_dhcsr);
1005 /* Store important errors instead of failing and proceed to reset assert */
1006
1007 if (retval != ERROR_OK || !(cortex_m->dcb_dhcsr & C_DEBUGEN))
1008 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DHCSR, DBGKEY | C_DEBUGEN);
1009
1010 /* If the processor is sleeping in a WFI or WFE instruction, the
1011 * C_HALT bit must be asserted to regain control */
1012 if (retval == ERROR_OK && (cortex_m->dcb_dhcsr & S_SLEEP))
1013 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DHCSR, DBGKEY | C_HALT | C_DEBUGEN);
1014
1015 mem_ap_write_u32(armv7m->debug_ap, DCB_DCRDR, 0);
1016 /* Ignore less important errors */
1017
1018 if (!target->reset_halt) {
1019 /* Set/Clear C_MASKINTS in a separate operation */
1020 if (cortex_m->dcb_dhcsr & C_MASKINTS)
1021 mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DHCSR,
1022 DBGKEY | C_DEBUGEN | C_HALT);
1023
1024 /* clear any debug flags before resuming */
1025 cortex_m_clear_halt(target);
1026
1027 /* clear C_HALT in dhcsr reg */
1028 cortex_m_write_debug_halt_mask(target, 0, C_HALT);
1029 } else {
1030 /* Halt in debug on reset; endreset_event() restores DEMCR.
1031 *
1032 * REVISIT catching BUSERR presumably helps to defend against
1033 * bad vector table entries. Should this include MMERR or
1034 * other flags too?
1035 */
1036 int retval2;
1037 retval2 = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DEMCR,
1038 TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
1039 if (retval != ERROR_OK || retval2 != ERROR_OK)
1040 LOG_INFO("AP write error, reset will not halt");
1041 }
1042
1043 if (jtag_reset_config & RESET_HAS_SRST) {
1044 /* default to asserting srst */
1045 if (!srst_asserted)
1046 adapter_assert_reset();
1047
1048 /* srst is asserted, ignore AP access errors */
1049 retval = ERROR_OK;
1050 } else {
1051 /* Use a standard Cortex-M3 software reset mechanism.
1052 * We default to using VECRESET as it is supported on all current cores.
1053 * This has the disadvantage of not resetting the peripherals, so a
1054 * reset-init event handler is needed to perform any peripheral resets.
1055 */
1056 LOG_DEBUG("Using Cortex-M %s", (reset_config == CORTEX_M_RESET_SYSRESETREQ)
1057 ? "SYSRESETREQ" : "VECTRESET");
1058
1059 if (reset_config == CORTEX_M_RESET_VECTRESET) {
1060 LOG_WARNING("Only resetting the Cortex-M core, use a reset-init event "
1061 "handler to reset any peripherals or configure hardware srst support.");
1062 }
1063
1064 int retval3;
1065 retval3 = mem_ap_write_atomic_u32(armv7m->debug_ap, NVIC_AIRCR,
1066 AIRCR_VECTKEY | ((reset_config == CORTEX_M_RESET_SYSRESETREQ)
1067 ? AIRCR_SYSRESETREQ : AIRCR_VECTRESET));
1068 if (retval3 != ERROR_OK)
1069 LOG_DEBUG("Ignoring AP write error right after reset");
1070
1071 retval3 = dap_dp_init(armv7m->debug_ap->dap);
1072 if (retval3 != ERROR_OK)
1073 LOG_ERROR("DP initialisation failed");
1074
1075 else {
1076 /* I do not know why this is necessary, but it
1077 * fixes strange effects (step/resume cause NMI
1078 * after reset) on LM3S6918 -- Michael Schwingen
1079 */
1080 uint32_t tmp;
1081 mem_ap_read_atomic_u32(armv7m->debug_ap, NVIC_AIRCR, &tmp);
1082 }
1083 }
1084
1085 target->state = TARGET_RESET;
1086 jtag_add_sleep(50000);
1087
1088 register_cache_invalidate(cortex_m->armv7m.arm.core_cache);
1089
1090 /* now return stored error code if any */
1091 if (retval != ERROR_OK)
1092 return retval;
1093
1094 if (target->reset_halt) {
1095 retval = target_halt(target);
1096 if (retval != ERROR_OK)
1097 return retval;
1098 }
1099
1100 return ERROR_OK;
1101 }
1102
1103 static int cortex_m_deassert_reset(struct target *target)
1104 {
1105 struct armv7m_common *armv7m = &target_to_cm(target)->armv7m;
1106
1107 LOG_DEBUG("target->state: %s",
1108 target_state_name(target));
1109
1110 /* deassert reset lines */
1111 adapter_deassert_reset();
1112
1113 enum reset_types jtag_reset_config = jtag_get_reset_config();
1114
1115 if ((jtag_reset_config & RESET_HAS_SRST) &&
1116 !(jtag_reset_config & RESET_SRST_NO_GATING) &&
1117 target_was_examined(target)) {
1118 int retval = dap_dp_init(armv7m->debug_ap->dap);
1119 if (retval != ERROR_OK) {
1120 LOG_ERROR("DP initialisation failed");
1121 return retval;
1122 }
1123 }
1124
1125 return ERROR_OK;
1126 }
1127
1128 int cortex_m_set_breakpoint(struct target *target, struct breakpoint *breakpoint)
1129 {
1130 int retval;
1131 int fp_num = 0;
1132 struct cortex_m_common *cortex_m = target_to_cm(target);
1133 struct cortex_m_fp_comparator *comparator_list = cortex_m->fp_comparator_list;
1134
1135 if (breakpoint->set) {
1136 LOG_WARNING("breakpoint (BPID: %" PRIu32 ") already set", breakpoint->unique_id);
1137 return ERROR_OK;
1138 }
1139
1140 if (cortex_m->auto_bp_type)
1141 breakpoint->type = BKPT_TYPE_BY_ADDR(breakpoint->address);
1142
1143 if (breakpoint->type == BKPT_HARD) {
1144 uint32_t fpcr_value;
1145 while (comparator_list[fp_num].used && (fp_num < cortex_m->fp_num_code))
1146 fp_num++;
1147 if (fp_num >= cortex_m->fp_num_code) {
1148 LOG_ERROR("Can not find free FPB Comparator!");
1149 return ERROR_FAIL;
1150 }
1151 breakpoint->set = fp_num + 1;
1152 fpcr_value = breakpoint->address | 1;
1153 if (cortex_m->fp_rev == 0) {
1154 uint32_t hilo;
1155 hilo = (breakpoint->address & 0x2) ? FPCR_REPLACE_BKPT_HIGH : FPCR_REPLACE_BKPT_LOW;
1156 fpcr_value = (fpcr_value & 0x1FFFFFFC) | hilo | 1;
1157 } else if (cortex_m->fp_rev > 1) {
1158 LOG_ERROR("Unhandled Cortex-M Flash Patch Breakpoint architecture revision");
1159 return ERROR_FAIL;
1160 }
1161 comparator_list[fp_num].used = 1;
1162 comparator_list[fp_num].fpcr_value = fpcr_value;
1163 target_write_u32(target, comparator_list[fp_num].fpcr_address,
1164 comparator_list[fp_num].fpcr_value);
1165 LOG_DEBUG("fpc_num %i fpcr_value 0x%" PRIx32 "",
1166 fp_num,
1167 comparator_list[fp_num].fpcr_value);
1168 if (!cortex_m->fpb_enabled) {
1169 LOG_DEBUG("FPB wasn't enabled, do it now");
1170 retval = cortex_m_enable_fpb(target);
1171 if (retval != ERROR_OK) {
1172 LOG_ERROR("Failed to enable the FPB");
1173 return retval;
1174 }
1175
1176 cortex_m->fpb_enabled = 1;
1177 }
1178 } else if (breakpoint->type == BKPT_SOFT) {
1179 uint8_t code[4];
1180
1181 /* NOTE: on ARMv6-M and ARMv7-M, BKPT(0xab) is used for
1182 * semihosting; don't use that. Otherwise the BKPT
1183 * parameter is arbitrary.
1184 */
1185 buf_set_u32(code, 0, 32, ARMV5_T_BKPT(0x11));
1186 retval = target_read_memory(target,
1187 breakpoint->address & 0xFFFFFFFE,
1188 breakpoint->length, 1,
1189 breakpoint->orig_instr);
1190 if (retval != ERROR_OK)
1191 return retval;
1192 retval = target_write_memory(target,
1193 breakpoint->address & 0xFFFFFFFE,
1194 breakpoint->length, 1,
1195 code);
1196 if (retval != ERROR_OK)
1197 return retval;
1198 breakpoint->set = true;
1199 }
1200
1201 LOG_DEBUG("BPID: %" PRIu32 ", Type: %d, Address: 0x%08" PRIx32 " Length: %d (set=%d)",
1202 breakpoint->unique_id,
1203 (int)(breakpoint->type),
1204 breakpoint->address,
1205 breakpoint->length,
1206 breakpoint->set);
1207
1208 return ERROR_OK;
1209 }
1210
1211 int cortex_m_unset_breakpoint(struct target *target, struct breakpoint *breakpoint)
1212 {
1213 int retval;
1214 struct cortex_m_common *cortex_m = target_to_cm(target);
1215 struct cortex_m_fp_comparator *comparator_list = cortex_m->fp_comparator_list;
1216
1217 if (!breakpoint->set) {
1218 LOG_WARNING("breakpoint not set");
1219 return ERROR_OK;
1220 }
1221
1222 LOG_DEBUG("BPID: %" PRIu32 ", Type: %d, Address: 0x%08" PRIx32 " Length: %d (set=%d)",
1223 breakpoint->unique_id,
1224 (int)(breakpoint->type),
1225 breakpoint->address,
1226 breakpoint->length,
1227 breakpoint->set);
1228
1229 if (breakpoint->type == BKPT_HARD) {
1230 int fp_num = breakpoint->set - 1;
1231 if ((fp_num < 0) || (fp_num >= cortex_m->fp_num_code)) {
1232 LOG_DEBUG("Invalid FP Comparator number in breakpoint");
1233 return ERROR_OK;
1234 }
1235 comparator_list[fp_num].used = 0;
1236 comparator_list[fp_num].fpcr_value = 0;
1237 target_write_u32(target, comparator_list[fp_num].fpcr_address,
1238 comparator_list[fp_num].fpcr_value);
1239 } else {
1240 /* restore original instruction (kept in target endianness) */
1241 if (breakpoint->length == 4) {
1242 retval = target_write_memory(target, breakpoint->address & 0xFFFFFFFE, 4, 1,
1243 breakpoint->orig_instr);
1244 if (retval != ERROR_OK)
1245 return retval;
1246 } else {
1247 retval = target_write_memory(target, breakpoint->address & 0xFFFFFFFE, 2, 1,
1248 breakpoint->orig_instr);
1249 if (retval != ERROR_OK)
1250 return retval;
1251 }
1252 }
1253 breakpoint->set = false;
1254
1255 return ERROR_OK;
1256 }
1257
1258 int cortex_m_add_breakpoint(struct target *target, struct breakpoint *breakpoint)
1259 {
1260 struct cortex_m_common *cortex_m = target_to_cm(target);
1261
1262 if (cortex_m->auto_bp_type)
1263 breakpoint->type = BKPT_TYPE_BY_ADDR(breakpoint->address);
1264
1265 if (breakpoint->type != BKPT_TYPE_BY_ADDR(breakpoint->address)) {
1266 if (breakpoint->type == BKPT_HARD) {
1267 LOG_INFO("flash patch comparator requested outside code memory region");
1268 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1269 }
1270
1271 if (breakpoint->type == BKPT_SOFT) {
1272 LOG_INFO("soft breakpoint requested in code (flash) memory region");
1273 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1274 }
1275 }
1276
1277 if ((breakpoint->type == BKPT_HARD) && (cortex_m->fp_code_available < 1)) {
1278 LOG_INFO("no flash patch comparator unit available for hardware breakpoint");
1279 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1280 }
1281
1282 if (breakpoint->length == 3) {
1283 LOG_DEBUG("Using a two byte breakpoint for 32bit Thumb-2 request");
1284 breakpoint->length = 2;
1285 }
1286
1287 if ((breakpoint->length != 2)) {
1288 LOG_INFO("only breakpoints of two bytes length supported");
1289 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1290 }
1291
1292 if (breakpoint->type == BKPT_HARD)
1293 cortex_m->fp_code_available--;
1294
1295 return cortex_m_set_breakpoint(target, breakpoint);
1296 }
1297
1298 int cortex_m_remove_breakpoint(struct target *target, struct breakpoint *breakpoint)
1299 {
1300 struct cortex_m_common *cortex_m = target_to_cm(target);
1301
1302 /* REVISIT why check? FBP can be updated with core running ... */
1303 if (target->state != TARGET_HALTED) {
1304 LOG_WARNING("target not halted");
1305 return ERROR_TARGET_NOT_HALTED;
1306 }
1307
1308 if (cortex_m->auto_bp_type)
1309 breakpoint->type = BKPT_TYPE_BY_ADDR(breakpoint->address);
1310
1311 if (breakpoint->set)
1312 cortex_m_unset_breakpoint(target, breakpoint);
1313
1314 if (breakpoint->type == BKPT_HARD)
1315 cortex_m->fp_code_available++;
1316
1317 return ERROR_OK;
1318 }
1319
1320 int cortex_m_set_watchpoint(struct target *target, struct watchpoint *watchpoint)
1321 {
1322 int dwt_num = 0;
1323 uint32_t mask, temp;
1324 struct cortex_m_common *cortex_m = target_to_cm(target);
1325
1326 /* watchpoint params were validated earlier */
1327 mask = 0;
1328 temp = watchpoint->length;
1329 while (temp) {
1330 temp >>= 1;
1331 mask++;
1332 }
1333 mask--;
1334
1335 /* REVISIT Don't fully trust these "not used" records ... users
1336 * may set up breakpoints by hand, e.g. dual-address data value
1337 * watchpoint using comparator #1; comparator #0 matching cycle
1338 * count; send data trace info through ITM and TPIU; etc
1339 */
1340 struct cortex_m_dwt_comparator *comparator;
1341
1342 for (comparator = cortex_m->dwt_comparator_list;
1343 comparator->used && dwt_num < cortex_m->dwt_num_comp;
1344 comparator++, dwt_num++)
1345 continue;
1346 if (dwt_num >= cortex_m->dwt_num_comp) {
1347 LOG_ERROR("Can not find free DWT Comparator");
1348 return ERROR_FAIL;
1349 }
1350 comparator->used = 1;
1351 watchpoint->set = dwt_num + 1;
1352
1353 comparator->comp = watchpoint->address;
1354 target_write_u32(target, comparator->dwt_comparator_address + 0,
1355 comparator->comp);
1356
1357 comparator->mask = mask;
1358 target_write_u32(target, comparator->dwt_comparator_address + 4,
1359 comparator->mask);
1360
1361 switch (watchpoint->rw) {
1362 case WPT_READ:
1363 comparator->function = 5;
1364 break;
1365 case WPT_WRITE:
1366 comparator->function = 6;
1367 break;
1368 case WPT_ACCESS:
1369 comparator->function = 7;
1370 break;
1371 }
1372 target_write_u32(target, comparator->dwt_comparator_address + 8,
1373 comparator->function);
1374
1375 LOG_DEBUG("Watchpoint (ID %d) DWT%d 0x%08x 0x%x 0x%05x",
1376 watchpoint->unique_id, dwt_num,
1377 (unsigned) comparator->comp,
1378 (unsigned) comparator->mask,
1379 (unsigned) comparator->function);
1380 return ERROR_OK;
1381 }
1382
1383 int cortex_m_unset_watchpoint(struct target *target, struct watchpoint *watchpoint)
1384 {
1385 struct cortex_m_common *cortex_m = target_to_cm(target);
1386 struct cortex_m_dwt_comparator *comparator;
1387 int dwt_num;
1388
1389 if (!watchpoint->set) {
1390 LOG_WARNING("watchpoint (wpid: %d) not set",
1391 watchpoint->unique_id);
1392 return ERROR_OK;
1393 }
1394
1395 dwt_num = watchpoint->set - 1;
1396
1397 LOG_DEBUG("Watchpoint (ID %d) DWT%d address: 0x%08x clear",
1398 watchpoint->unique_id, dwt_num,
1399 (unsigned) watchpoint->address);
1400
1401 if ((dwt_num < 0) || (dwt_num >= cortex_m->dwt_num_comp)) {
1402 LOG_DEBUG("Invalid DWT Comparator number in watchpoint");
1403 return ERROR_OK;
1404 }
1405
1406 comparator = cortex_m->dwt_comparator_list + dwt_num;
1407 comparator->used = 0;
1408 comparator->function = 0;
1409 target_write_u32(target, comparator->dwt_comparator_address + 8,
1410 comparator->function);
1411
1412 watchpoint->set = false;
1413
1414 return ERROR_OK;
1415 }
1416
1417 int cortex_m_add_watchpoint(struct target *target, struct watchpoint *watchpoint)
1418 {
1419 struct cortex_m_common *cortex_m = target_to_cm(target);
1420
1421 if (cortex_m->dwt_comp_available < 1) {
1422 LOG_DEBUG("no comparators?");
1423 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1424 }
1425
1426 /* hardware doesn't support data value masking */
1427 if (watchpoint->mask != ~(uint32_t)0) {
1428 LOG_DEBUG("watchpoint value masks not supported");
1429 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1430 }
1431
1432 /* hardware allows address masks of up to 32K */
1433 unsigned mask;
1434
1435 for (mask = 0; mask < 16; mask++) {
1436 if ((1u << mask) == watchpoint->length)
1437 break;
1438 }
1439 if (mask == 16) {
1440 LOG_DEBUG("unsupported watchpoint length");
1441 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1442 }
1443 if (watchpoint->address & ((1 << mask) - 1)) {
1444 LOG_DEBUG("watchpoint address is unaligned");
1445 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1446 }
1447
1448 /* Caller doesn't seem to be able to describe watching for data
1449 * values of zero; that flags "no value".
1450 *
1451 * REVISIT This DWT may well be able to watch for specific data
1452 * values. Requires comparator #1 to set DATAVMATCH and match
1453 * the data, and another comparator (DATAVADDR0) matching addr.
1454 */
1455 if (watchpoint->value) {
1456 LOG_DEBUG("data value watchpoint not YET supported");
1457 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1458 }
1459
1460 cortex_m->dwt_comp_available--;
1461 LOG_DEBUG("dwt_comp_available: %d", cortex_m->dwt_comp_available);
1462
1463 return ERROR_OK;
1464 }
1465
1466 int cortex_m_remove_watchpoint(struct target *target, struct watchpoint *watchpoint)
1467 {
1468 struct cortex_m_common *cortex_m = target_to_cm(target);
1469
1470 /* REVISIT why check? DWT can be updated with core running ... */
1471 if (target->state != TARGET_HALTED) {
1472 LOG_WARNING("target not halted");
1473 return ERROR_TARGET_NOT_HALTED;
1474 }
1475
1476 if (watchpoint->set)
1477 cortex_m_unset_watchpoint(target, watchpoint);
1478
1479 cortex_m->dwt_comp_available++;
1480 LOG_DEBUG("dwt_comp_available: %d", cortex_m->dwt_comp_available);
1481
1482 return ERROR_OK;
1483 }
1484
1485 void cortex_m_enable_watchpoints(struct target *target)
1486 {
1487 struct watchpoint *watchpoint = target->watchpoints;
1488
1489 /* set any pending watchpoints */
1490 while (watchpoint) {
1491 if (!watchpoint->set)
1492 cortex_m_set_watchpoint(target, watchpoint);
1493 watchpoint = watchpoint->next;
1494 }
1495 }
1496
1497 static int cortex_m_load_core_reg_u32(struct target *target,
1498 uint32_t num, uint32_t *value)
1499 {
1500 int retval;
1501
1502 /* NOTE: we "know" here that the register identifiers used
1503 * in the v7m header match the Cortex-M3 Debug Core Register
1504 * Selector values for R0..R15, xPSR, MSP, and PSP.
1505 */
1506 switch (num) {
1507 case 0 ... 18:
1508 /* read a normal core register */
1509 retval = cortexm_dap_read_coreregister_u32(target, value, num);
1510
1511 if (retval != ERROR_OK) {
1512 LOG_ERROR("JTAG failure %i", retval);
1513 return ERROR_JTAG_DEVICE_ERROR;
1514 }
1515 LOG_DEBUG("load from core reg %i value 0x%" PRIx32 "", (int)num, *value);
1516 break;
1517
1518 case ARMV7M_FPSCR:
1519 /* Floating-point Status and Registers */
1520 retval = target_write_u32(target, DCB_DCRSR, 0x21);
1521 if (retval != ERROR_OK)
1522 return retval;
1523 retval = target_read_u32(target, DCB_DCRDR, value);
1524 if (retval != ERROR_OK)
1525 return retval;
1526 LOG_DEBUG("load from FPSCR value 0x%" PRIx32, *value);
1527 break;
1528
1529 case ARMV7M_S0 ... ARMV7M_S31:
1530 /* Floating-point Status and Registers */
1531 retval = target_write_u32(target, DCB_DCRSR, num - ARMV7M_S0 + 0x40);
1532 if (retval != ERROR_OK)
1533 return retval;
1534 retval = target_read_u32(target, DCB_DCRDR, value);
1535 if (retval != ERROR_OK)
1536 return retval;
1537 LOG_DEBUG("load from FPU reg S%d value 0x%" PRIx32,
1538 (int)(num - ARMV7M_S0), *value);
1539 break;
1540
1541 case ARMV7M_PRIMASK:
1542 case ARMV7M_BASEPRI:
1543 case ARMV7M_FAULTMASK:
1544 case ARMV7M_CONTROL:
1545 /* Cortex-M3 packages these four registers as bitfields
1546 * in one Debug Core register. So say r0 and r2 docs;
1547 * it was removed from r1 docs, but still works.
1548 */
1549 cortexm_dap_read_coreregister_u32(target, value, 20);
1550
1551 switch (num) {
1552 case ARMV7M_PRIMASK:
1553 *value = buf_get_u32((uint8_t *)value, 0, 1);
1554 break;
1555
1556 case ARMV7M_BASEPRI:
1557 *value = buf_get_u32((uint8_t *)value, 8, 8);
1558 break;
1559
1560 case ARMV7M_FAULTMASK:
1561 *value = buf_get_u32((uint8_t *)value, 16, 1);
1562 break;
1563
1564 case ARMV7M_CONTROL:
1565 *value = buf_get_u32((uint8_t *)value, 24, 2);
1566 break;
1567 }
1568
1569 LOG_DEBUG("load from special reg %i value 0x%" PRIx32 "", (int)num, *value);
1570 break;
1571
1572 default:
1573 return ERROR_COMMAND_SYNTAX_ERROR;
1574 }
1575
1576 return ERROR_OK;
1577 }
1578
1579 static int cortex_m_store_core_reg_u32(struct target *target,
1580 uint32_t num, uint32_t value)
1581 {
1582 int retval;
1583 uint32_t reg;
1584 struct armv7m_common *armv7m = target_to_armv7m(target);
1585
1586 /* NOTE: we "know" here that the register identifiers used
1587 * in the v7m header match the Cortex-M3 Debug Core Register
1588 * Selector values for R0..R15, xPSR, MSP, and PSP.
1589 */
1590 switch (num) {
1591 case 0 ... 18:
1592 retval = cortexm_dap_write_coreregister_u32(target, value, num);
1593 if (retval != ERROR_OK) {
1594 struct reg *r;
1595
1596 LOG_ERROR("JTAG failure");
1597 r = armv7m->arm.core_cache->reg_list + num;
1598 r->dirty = r->valid;
1599 return ERROR_JTAG_DEVICE_ERROR;
1600 }
1601 LOG_DEBUG("write core reg %i value 0x%" PRIx32 "", (int)num, value);
1602 break;
1603
1604 case ARMV7M_FPSCR:
1605 /* Floating-point Status and Registers */
1606 retval = target_write_u32(target, DCB_DCRDR, value);
1607 if (retval != ERROR_OK)
1608 return retval;
1609 retval = target_write_u32(target, DCB_DCRSR, 0x21 | (1<<16));
1610 if (retval != ERROR_OK)
1611 return retval;
1612 LOG_DEBUG("write FPSCR value 0x%" PRIx32, value);
1613 break;
1614
1615 case ARMV7M_S0 ... ARMV7M_S31:
1616 /* Floating-point Status and Registers */
1617 retval = target_write_u32(target, DCB_DCRDR, value);
1618 if (retval != ERROR_OK)
1619 return retval;
1620 retval = target_write_u32(target, DCB_DCRSR, (num - ARMV7M_S0 + 0x40) | (1<<16));
1621 if (retval != ERROR_OK)
1622 return retval;
1623 LOG_DEBUG("write FPU reg S%d value 0x%" PRIx32,
1624 (int)(num - ARMV7M_S0), value);
1625 break;
1626
1627 case ARMV7M_PRIMASK:
1628 case ARMV7M_BASEPRI:
1629 case ARMV7M_FAULTMASK:
1630 case ARMV7M_CONTROL:
1631 /* Cortex-M3 packages these four registers as bitfields
1632 * in one Debug Core register. So say r0 and r2 docs;
1633 * it was removed from r1 docs, but still works.
1634 */
1635 cortexm_dap_read_coreregister_u32(target, &reg, 20);
1636
1637 switch (num) {
1638 case ARMV7M_PRIMASK:
1639 buf_set_u32((uint8_t *)&reg, 0, 1, value);
1640 break;
1641
1642 case ARMV7M_BASEPRI:
1643 buf_set_u32((uint8_t *)&reg, 8, 8, value);
1644 break;
1645
1646 case ARMV7M_FAULTMASK:
1647 buf_set_u32((uint8_t *)&reg, 16, 1, value);
1648 break;
1649
1650 case ARMV7M_CONTROL:
1651 buf_set_u32((uint8_t *)&reg, 24, 2, value);
1652 break;
1653 }
1654
1655 cortexm_dap_write_coreregister_u32(target, reg, 20);
1656
1657 LOG_DEBUG("write special reg %i value 0x%" PRIx32 " ", (int)num, value);
1658 break;
1659
1660 default:
1661 return ERROR_COMMAND_SYNTAX_ERROR;
1662 }
1663
1664 return ERROR_OK;
1665 }
1666
1667 static int cortex_m_read_memory(struct target *target, uint32_t address,
1668 uint32_t size, uint32_t count, uint8_t *buffer)
1669 {
1670 struct armv7m_common *armv7m = target_to_armv7m(target);
1671
1672 if (armv7m->arm.is_armv6m) {
1673 /* armv6m does not handle unaligned memory access */
1674 if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
1675 return ERROR_TARGET_UNALIGNED_ACCESS;
1676 }
1677
1678 return mem_ap_read_buf(armv7m->debug_ap, buffer, size, count, address);
1679 }
1680
1681 static int cortex_m_write_memory(struct target *target, uint32_t address,
1682 uint32_t size, uint32_t count, const uint8_t *buffer)
1683 {
1684 struct armv7m_common *armv7m = target_to_armv7m(target);
1685
1686 if (armv7m->arm.is_armv6m) {
1687 /* armv6m does not handle unaligned memory access */
1688 if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
1689 return ERROR_TARGET_UNALIGNED_ACCESS;
1690 }
1691
1692 return mem_ap_write_buf(armv7m->debug_ap, buffer, size, count, address);
1693 }
1694
1695 static int cortex_m_init_target(struct command_context *cmd_ctx,
1696 struct target *target)
1697 {
1698 armv7m_build_reg_cache(target);
1699 arm_semihosting_init(target);
1700 return ERROR_OK;
1701 }
1702
1703 void cortex_m_deinit_target(struct target *target)
1704 {
1705 struct cortex_m_common *cortex_m = target_to_cm(target);
1706
1707 free(cortex_m->fp_comparator_list);
1708
1709 cortex_m_dwt_free(target);
1710 armv7m_free_reg_cache(target);
1711
1712 free(target->private_config);
1713 free(cortex_m);
1714 }
1715
1716 /* REVISIT cache valid/dirty bits are unmaintained. We could set "valid"
1717 * on r/w if the core is not running, and clear on resume or reset ... or
1718 * at least, in a post_restore_context() method.
1719 */
1720
1721 struct dwt_reg_state {
1722 struct target *target;
1723 uint32_t addr;
1724 uint8_t value[4]; /* scratch/cache */
1725 };
1726
1727 static int cortex_m_dwt_get_reg(struct reg *reg)
1728 {
1729 struct dwt_reg_state *state = reg->arch_info;
1730
1731 uint32_t tmp;
1732 int retval = target_read_u32(state->target, state->addr, &tmp);
1733 if (retval != ERROR_OK)
1734 return retval;
1735
1736 buf_set_u32(state->value, 0, 32, tmp);
1737 return ERROR_OK;
1738 }
1739
1740 static int cortex_m_dwt_set_reg(struct reg *reg, uint8_t *buf)
1741 {
1742 struct dwt_reg_state *state = reg->arch_info;
1743
1744 return target_write_u32(state->target, state->addr,
1745 buf_get_u32(buf, 0, reg->size));
1746 }
1747
1748 struct dwt_reg {
1749 uint32_t addr;
1750 char *name;
1751 unsigned size;
1752 };
1753
1754 static struct dwt_reg dwt_base_regs[] = {
1755 { DWT_CTRL, "dwt_ctrl", 32, },
1756 /* NOTE that Erratum 532314 (fixed r2p0) affects CYCCNT: it wrongly
1757 * increments while the core is asleep.
1758 */
1759 { DWT_CYCCNT, "dwt_cyccnt", 32, },
1760 /* plus some 8 bit counters, useful for profiling with TPIU */
1761 };
1762
1763 static struct dwt_reg dwt_comp[] = {
1764 #define DWT_COMPARATOR(i) \
1765 { DWT_COMP0 + 0x10 * (i), "dwt_" #i "_comp", 32, }, \
1766 { DWT_MASK0 + 0x10 * (i), "dwt_" #i "_mask", 4, }, \
1767 { DWT_FUNCTION0 + 0x10 * (i), "dwt_" #i "_function", 32, }
1768 DWT_COMPARATOR(0),
1769 DWT_COMPARATOR(1),
1770 DWT_COMPARATOR(2),
1771 DWT_COMPARATOR(3),
1772 #undef DWT_COMPARATOR
1773 };
1774
1775 static const struct reg_arch_type dwt_reg_type = {
1776 .get = cortex_m_dwt_get_reg,
1777 .set = cortex_m_dwt_set_reg,
1778 };
1779
1780 static void cortex_m_dwt_addreg(struct target *t, struct reg *r, struct dwt_reg *d)
1781 {
1782 struct dwt_reg_state *state;
1783
1784 state = calloc(1, sizeof *state);
1785 if (!state)
1786 return;
1787 state->addr = d->addr;
1788 state->target = t;
1789
1790 r->name = d->name;
1791 r->size = d->size;
1792 r->value = state->value;
1793 r->arch_info = state;
1794 r->type = &dwt_reg_type;
1795 }
1796
1797 void cortex_m_dwt_setup(struct cortex_m_common *cm, struct target *target)
1798 {
1799 uint32_t dwtcr;
1800 struct reg_cache *cache;
1801 struct cortex_m_dwt_comparator *comparator;
1802 int reg, i;
1803
1804 target_read_u32(target, DWT_CTRL, &dwtcr);
1805 if (!dwtcr) {
1806 LOG_DEBUG("no DWT");
1807 return;
1808 }
1809
1810 cm->dwt_num_comp = (dwtcr >> 28) & 0xF;
1811 cm->dwt_comp_available = cm->dwt_num_comp;
1812 cm->dwt_comparator_list = calloc(cm->dwt_num_comp,
1813 sizeof(struct cortex_m_dwt_comparator));
1814 if (!cm->dwt_comparator_list) {
1815 fail0:
1816 cm->dwt_num_comp = 0;
1817 LOG_ERROR("out of mem");
1818 return;
1819 }
1820
1821 cache = calloc(1, sizeof *cache);
1822 if (!cache) {
1823 fail1:
1824 free(cm->dwt_comparator_list);
1825 goto fail0;
1826 }
1827 cache->name = "Cortex-M DWT registers";
1828 cache->num_regs = 2 + cm->dwt_num_comp * 3;
1829 cache->reg_list = calloc(cache->num_regs, sizeof *cache->reg_list);
1830 if (!cache->reg_list) {
1831 free(cache);
1832 goto fail1;
1833 }
1834
1835 for (reg = 0; reg < 2; reg++)
1836 cortex_m_dwt_addreg(target, cache->reg_list + reg,
1837 dwt_base_regs + reg);
1838
1839 comparator = cm->dwt_comparator_list;
1840 for (i = 0; i < cm->dwt_num_comp; i++, comparator++) {
1841 int j;
1842
1843 comparator->dwt_comparator_address = DWT_COMP0 + 0x10 * i;
1844 for (j = 0; j < 3; j++, reg++)
1845 cortex_m_dwt_addreg(target, cache->reg_list + reg,
1846 dwt_comp + 3 * i + j);
1847
1848 /* make sure we clear any watchpoints enabled on the target */
1849 target_write_u32(target, comparator->dwt_comparator_address + 8, 0);
1850 }
1851
1852 *register_get_last_cache_p(&target->reg_cache) = cache;
1853 cm->dwt_cache = cache;
1854
1855 LOG_DEBUG("DWT dwtcr 0x%" PRIx32 ", comp %d, watch%s",
1856 dwtcr, cm->dwt_num_comp,
1857 (dwtcr & (0xf << 24)) ? " only" : "/trigger");
1858
1859 /* REVISIT: if num_comp > 1, check whether comparator #1 can
1860 * implement single-address data value watchpoints ... so we
1861 * won't need to check it later, when asked to set one up.
1862 */
1863 }
1864
1865 static void cortex_m_dwt_free(struct target *target)
1866 {
1867 struct cortex_m_common *cm = target_to_cm(target);
1868 struct reg_cache *cache = cm->dwt_cache;
1869
1870 free(cm->dwt_comparator_list);
1871 cm->dwt_comparator_list = NULL;
1872 cm->dwt_num_comp = 0;
1873
1874 if (cache) {
1875 register_unlink_cache(&target->reg_cache, cache);
1876
1877 if (cache->reg_list) {
1878 for (size_t i = 0; i < cache->num_regs; i++)
1879 free(cache->reg_list[i].arch_info);
1880 free(cache->reg_list);
1881 }
1882 free(cache);
1883 }
1884 cm->dwt_cache = NULL;
1885 }
1886
1887 #define MVFR0 0xe000ef40
1888 #define MVFR1 0xe000ef44
1889
1890 #define MVFR0_DEFAULT_M4 0x10110021
1891 #define MVFR1_DEFAULT_M4 0x11000011
1892
1893 #define MVFR0_DEFAULT_M7_SP 0x10110021
1894 #define MVFR0_DEFAULT_M7_DP 0x10110221
1895 #define MVFR1_DEFAULT_M7_SP 0x11000011
1896 #define MVFR1_DEFAULT_M7_DP 0x12000011
1897
1898 int cortex_m_examine(struct target *target)
1899 {
1900 int retval;
1901 uint32_t cpuid, fpcr, mvfr0, mvfr1;
1902 int i;
1903 struct cortex_m_common *cortex_m = target_to_cm(target);
1904 struct adiv5_dap *swjdp = cortex_m->armv7m.arm.dap;
1905 struct armv7m_common *armv7m = target_to_armv7m(target);
1906
1907 /* stlink shares the examine handler but does not support
1908 * all its calls */
1909 if (!armv7m->stlink) {
1910 retval = dap_dp_init(swjdp);
1911 if (retval != ERROR_OK) {
1912 LOG_ERROR("Could not initialize the debug port");
1913 return retval;
1914 }
1915
1916 if (cortex_m->apsel < 0) {
1917 /* Search for the MEM-AP */
1918 retval = dap_find_ap(swjdp, AP_TYPE_AHB_AP, &armv7m->debug_ap);
1919 if (retval != ERROR_OK) {
1920 LOG_ERROR("Could not find MEM-AP to control the core");
1921 return retval;
1922 }
1923 } else {
1924 armv7m->debug_ap = dap_ap(swjdp, cortex_m->apsel);
1925 }
1926
1927 /* Leave (only) generic DAP stuff for debugport_init(); */
1928 armv7m->debug_ap->memaccess_tck = 8;
1929
1930 retval = mem_ap_init(armv7m->debug_ap);
1931 if (retval != ERROR_OK)
1932 return retval;
1933 }
1934
1935 if (!target_was_examined(target)) {
1936 target_set_examined(target);
1937
1938 /* Read from Device Identification Registers */
1939 retval = target_read_u32(target, CPUID, &cpuid);
1940 if (retval != ERROR_OK)
1941 return retval;
1942
1943 /* Get CPU Type */
1944 i = (cpuid >> 4) & 0xf;
1945
1946 LOG_DEBUG("Cortex-M%d r%" PRId8 "p%" PRId8 " processor detected",
1947 i, (uint8_t)((cpuid >> 20) & 0xf), (uint8_t)((cpuid >> 0) & 0xf));
1948 if (i == 7) {
1949 uint8_t rev, patch;
1950 rev = (cpuid >> 20) & 0xf;
1951 patch = (cpuid >> 0) & 0xf;
1952 if ((rev == 0) && (patch < 2))
1953 LOG_WARNING("Silicon bug: single stepping will enter pending exception handler!");
1954 }
1955 LOG_DEBUG("cpuid: 0x%8.8" PRIx32 "", cpuid);
1956
1957 if (i == 4) {
1958 target_read_u32(target, MVFR0, &mvfr0);
1959 target_read_u32(target, MVFR1, &mvfr1);
1960
1961 /* test for floating point feature on Cortex-M4 */
1962 if ((mvfr0 == MVFR0_DEFAULT_M4) && (mvfr1 == MVFR1_DEFAULT_M4)) {
1963 LOG_DEBUG("Cortex-M%d floating point feature FPv4_SP found", i);
1964 armv7m->fp_feature = FPv4_SP;
1965 }
1966 } else if (i == 7) {
1967 target_read_u32(target, MVFR0, &mvfr0);
1968 target_read_u32(target, MVFR1, &mvfr1);
1969
1970 /* test for floating point features on Cortex-M7 */
1971 if ((mvfr0 == MVFR0_DEFAULT_M7_SP) && (mvfr1 == MVFR1_DEFAULT_M7_SP)) {
1972 LOG_DEBUG("Cortex-M%d floating point feature FPv5_SP found", i);
1973 armv7m->fp_feature = FPv5_SP;
1974 } else if ((mvfr0 == MVFR0_DEFAULT_M7_DP) && (mvfr1 == MVFR1_DEFAULT_M7_DP)) {
1975 LOG_DEBUG("Cortex-M%d floating point feature FPv5_DP found", i);
1976 armv7m->fp_feature = FPv5_DP;
1977 }
1978 } else if (i == 0) {
1979 /* Cortex-M0 does not support unaligned memory access */
1980 armv7m->arm.is_armv6m = true;
1981 }
1982
1983 if (armv7m->fp_feature == FP_NONE &&
1984 armv7m->arm.core_cache->num_regs > ARMV7M_NUM_CORE_REGS_NOFP) {
1985 /* free unavailable FPU registers */
1986 size_t idx;
1987
1988 for (idx = ARMV7M_NUM_CORE_REGS_NOFP;
1989 idx < armv7m->arm.core_cache->num_regs;
1990 idx++) {
1991 free(armv7m->arm.core_cache->reg_list[idx].value);
1992 free(armv7m->arm.core_cache->reg_list[idx].feature);
1993 free(armv7m->arm.core_cache->reg_list[idx].reg_data_type);
1994 }
1995 armv7m->arm.core_cache->num_regs = ARMV7M_NUM_CORE_REGS_NOFP;
1996 }
1997
1998 if (!armv7m->stlink) {
1999 if (i == 3 || i == 4)
2000 /* Cortex-M3/M4 have 4096 bytes autoincrement range,
2001 * s. ARM IHI 0031C: MEM-AP 7.2.2 */
2002 armv7m->debug_ap->tar_autoincr_block = (1 << 12);
2003 else if (i == 7)
2004 /* Cortex-M7 has only 1024 bytes autoincrement range */
2005 armv7m->debug_ap->tar_autoincr_block = (1 << 10);
2006 }
2007
2008 /* Configure trace modules */
2009 retval = target_write_u32(target, DCB_DEMCR, TRCENA | armv7m->demcr);
2010 if (retval != ERROR_OK)
2011 return retval;
2012
2013 if (armv7m->trace_config.config_type != DISABLED) {
2014 armv7m_trace_tpiu_config(target);
2015 armv7m_trace_itm_config(target);
2016 }
2017
2018 /* NOTE: FPB and DWT are both optional. */
2019
2020 /* Setup FPB */
2021 target_read_u32(target, FP_CTRL, &fpcr);
2022 cortex_m->auto_bp_type = 1;
2023 /* bits [14:12] and [7:4] */
2024 cortex_m->fp_num_code = ((fpcr >> 8) & 0x70) | ((fpcr >> 4) & 0xF);
2025 cortex_m->fp_num_lit = (fpcr >> 8) & 0xF;
2026 cortex_m->fp_code_available = cortex_m->fp_num_code;
2027 /* Detect flash patch revision, see RM DDI 0403E.b page C1-817.
2028 Revision is zero base, fp_rev == 1 means Rev.2 ! */
2029 cortex_m->fp_rev = (fpcr >> 28) & 0xf;
2030 free(cortex_m->fp_comparator_list);
2031 cortex_m->fp_comparator_list = calloc(
2032 cortex_m->fp_num_code + cortex_m->fp_num_lit,
2033 sizeof(struct cortex_m_fp_comparator));
2034 cortex_m->fpb_enabled = fpcr & 1;
2035 for (i = 0; i < cortex_m->fp_num_code + cortex_m->fp_num_lit; i++) {
2036 cortex_m->fp_comparator_list[i].type =
2037 (i < cortex_m->fp_num_code) ? FPCR_CODE : FPCR_LITERAL;
2038 cortex_m->fp_comparator_list[i].fpcr_address = FP_COMP0 + 4 * i;
2039
2040 /* make sure we clear any breakpoints enabled on the target */
2041 target_write_u32(target, cortex_m->fp_comparator_list[i].fpcr_address, 0);
2042 }
2043 LOG_DEBUG("FPB fpcr 0x%" PRIx32 ", numcode %i, numlit %i",
2044 fpcr,
2045 cortex_m->fp_num_code,
2046 cortex_m->fp_num_lit);
2047
2048 /* Setup DWT */
2049 cortex_m_dwt_free(target);
2050 cortex_m_dwt_setup(cortex_m, target);
2051
2052 /* These hardware breakpoints only work for code in flash! */
2053 LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
2054 target_name(target),
2055 cortex_m->fp_num_code,
2056 cortex_m->dwt_num_comp);
2057 }
2058
2059 return ERROR_OK;
2060 }
2061
2062 static int cortex_m_dcc_read(struct target *target, uint8_t *value, uint8_t *ctrl)
2063 {
2064 struct armv7m_common *armv7m = target_to_armv7m(target);
2065 uint16_t dcrdr;
2066 uint8_t buf[2];
2067 int retval;
2068
2069 retval = mem_ap_read_buf_noincr(armv7m->debug_ap, buf, 2, 1, DCB_DCRDR);
2070 if (retval != ERROR_OK)
2071 return retval;
2072
2073 dcrdr = target_buffer_get_u16(target, buf);
2074 *ctrl = (uint8_t)dcrdr;
2075 *value = (uint8_t)(dcrdr >> 8);
2076
2077 LOG_DEBUG("data 0x%x ctrl 0x%x", *value, *ctrl);
2078
2079 /* write ack back to software dcc register
2080 * signify we have read data */
2081 if (dcrdr & (1 << 0)) {
2082 target_buffer_set_u16(target, buf, 0);
2083 retval = mem_ap_write_buf_noincr(armv7m->debug_ap, buf, 2, 1, DCB_DCRDR);
2084 if (retval != ERROR_OK)
2085 return retval;
2086 }
2087
2088 return ERROR_OK;
2089 }
2090
2091 static int cortex_m_target_request_data(struct target *target,
2092 uint32_t size, uint8_t *buffer)
2093 {
2094 uint8_t data;
2095 uint8_t ctrl;
2096 uint32_t i;
2097
2098 for (i = 0; i < (size * 4); i++) {
2099 int retval = cortex_m_dcc_read(target, &data, &ctrl);
2100 if (retval != ERROR_OK)
2101 return retval;
2102 buffer[i] = data;
2103 }
2104
2105 return ERROR_OK;
2106 }
2107
2108 static int cortex_m_handle_target_request(void *priv)
2109 {
2110 struct target *target = priv;
2111 if (!target_was_examined(target))
2112 return ERROR_OK;
2113
2114 if (!target->dbg_msg_enabled)
2115 return ERROR_OK;
2116
2117 if (target->state == TARGET_RUNNING) {
2118 uint8_t data;
2119 uint8_t ctrl;
2120 int retval;
2121
2122 retval = cortex_m_dcc_read(target, &data, &ctrl);
2123 if (retval != ERROR_OK)
2124 return retval;
2125
2126 /* check if we have data */
2127 if (ctrl & (1 << 0)) {
2128 uint32_t request;
2129
2130 /* we assume target is quick enough */
2131 request = data;
2132 for (int i = 1; i <= 3; i++) {
2133 retval = cortex_m_dcc_read(target, &data, &ctrl);
2134 if (retval != ERROR_OK)
2135 return retval;
2136 request |= ((uint32_t)data << (i * 8));
2137 }
2138 target_request(target, request);
2139 }
2140 }
2141
2142 return ERROR_OK;
2143 }
2144
2145 static int cortex_m_init_arch_info(struct target *target,
2146 struct cortex_m_common *cortex_m, struct jtag_tap *tap)
2147 {
2148 struct armv7m_common *armv7m = &cortex_m->armv7m;
2149
2150 armv7m_init_arch_info(target, armv7m);
2151
2152 /* tap has no dap initialized */
2153 if (!tap->dap) {
2154 tap->dap = dap_init();
2155
2156 /* Leave (only) generic DAP stuff for debugport_init() */
2157 tap->dap->tap = tap;
2158 }
2159
2160 /* default reset mode is to use srst if fitted
2161 * if not it will use CORTEX_M3_RESET_VECTRESET */
2162 cortex_m->soft_reset_config = CORTEX_M_RESET_VECTRESET;
2163
2164 armv7m->arm.dap = tap->dap;
2165
2166 /* register arch-specific functions */
2167 armv7m->examine_debug_reason = cortex_m_examine_debug_reason;
2168
2169 armv7m->post_debug_entry = NULL;
2170
2171 armv7m->pre_restore_context = NULL;
2172
2173 armv7m->load_core_reg_u32 = cortex_m_load_core_reg_u32;
2174 armv7m->store_core_reg_u32 = cortex_m_store_core_reg_u32;
2175
2176 target_register_timer_callback(cortex_m_handle_target_request, 1, 1, target);
2177
2178 return ERROR_OK;
2179 }
2180
2181 static int cortex_m_target_create(struct target *target, Jim_Interp *interp)
2182 {
2183 struct cortex_m_common *cortex_m = calloc(1, sizeof(struct cortex_m_common));
2184
2185 cortex_m->common_magic = CORTEX_M_COMMON_MAGIC;
2186 cortex_m_init_arch_info(target, cortex_m, target->tap);
2187
2188 if (target->private_config != NULL) {
2189 struct adiv5_private_config *pc =
2190 (struct adiv5_private_config *)target->private_config;
2191 cortex_m->apsel = pc->ap_num;
2192 } else
2193 cortex_m->apsel = -1;
2194
2195 return ERROR_OK;
2196 }
2197
2198 /*--------------------------------------------------------------------------*/
2199
2200 static int cortex_m_verify_pointer(struct command_context *cmd_ctx,
2201 struct cortex_m_common *cm)
2202 {
2203 if (cm->common_magic != CORTEX_M_COMMON_MAGIC) {
2204 command_print(cmd_ctx, "target is not a Cortex-M");
2205 return ERROR_TARGET_INVALID;
2206 }
2207 return ERROR_OK;
2208 }
2209
2210 /*
2211 * Only stuff below this line should need to verify that its target
2212 * is a Cortex-M3. Everything else should have indirected through the
2213 * cortexm3_target structure, which is only used with CM3 targets.
2214 */
2215
2216 static const struct {
2217 char name[10];
2218 unsigned mask;
2219 } vec_ids[] = {
2220 { "hard_err", VC_HARDERR, },
2221 { "int_err", VC_INTERR, },
2222 { "bus_err", VC_BUSERR, },
2223 { "state_err", VC_STATERR, },
2224 { "chk_err", VC_CHKERR, },
2225 { "nocp_err", VC_NOCPERR, },
2226 { "mm_err", VC_MMERR, },
2227 { "reset", VC_CORERESET, },
2228 };
2229
2230 COMMAND_HANDLER(handle_cortex_m_vector_catch_command)
2231 {
2232 struct target *target = get_current_target(CMD_CTX);
2233 struct cortex_m_common *cortex_m = target_to_cm(target);
2234 struct armv7m_common *armv7m = &cortex_m->armv7m;
2235 uint32_t demcr = 0;
2236 int retval;
2237
2238 retval = cortex_m_verify_pointer(CMD_CTX, cortex_m);
2239 if (retval != ERROR_OK)
2240 return retval;
2241
2242 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DEMCR, &demcr);
2243 if (retval != ERROR_OK)
2244 return retval;
2245
2246 if (CMD_ARGC > 0) {
2247 unsigned catch = 0;
2248
2249 if (CMD_ARGC == 1) {
2250 if (strcmp(CMD_ARGV[0], "all") == 0) {
2251 catch = VC_HARDERR | VC_INTERR | VC_BUSERR
2252 | VC_STATERR | VC_CHKERR | VC_NOCPERR
2253 | VC_MMERR | VC_CORERESET;
2254 goto write;
2255 } else if (strcmp(CMD_ARGV[0], "none") == 0)
2256 goto write;
2257 }
2258 while (CMD_ARGC-- > 0) {
2259 unsigned i;
2260 for (i = 0; i < ARRAY_SIZE(vec_ids); i++) {
2261 if (strcmp(CMD_ARGV[CMD_ARGC], vec_ids[i].name) != 0)
2262 continue;
2263 catch |= vec_ids[i].mask;
2264 break;
2265 }
2266 if (i == ARRAY_SIZE(vec_ids)) {
2267 LOG_ERROR("No CM3 vector '%s'", CMD_ARGV[CMD_ARGC]);
2268 return ERROR_COMMAND_SYNTAX_ERROR;
2269 }
2270 }
2271 write:
2272 /* For now, armv7m->demcr only stores vector catch flags. */
2273 armv7m->demcr = catch;
2274
2275 demcr &= ~0xffff;
2276 demcr |= catch;
2277
2278 /* write, but don't assume it stuck (why not??) */
2279 retval = mem_ap_write_u32(armv7m->debug_ap, DCB_DEMCR, demcr);
2280 if (retval != ERROR_OK)
2281 return retval;
2282 retval = mem_ap_read_atomic_u32(armv7m->debug_ap, DCB_DEMCR, &demcr);
2283 if (retval != ERROR_OK)
2284 return retval;
2285
2286 /* FIXME be sure to clear DEMCR on clean server shutdown.
2287 * Otherwise the vector catch hardware could fire when there's
2288 * no debugger hooked up, causing much confusion...
2289 */
2290 }
2291
2292 for (unsigned i = 0; i < ARRAY_SIZE(vec_ids); i++) {
2293 command_print(CMD_CTX, "%9s: %s", vec_ids[i].name,
2294 (demcr & vec_ids[i].mask) ? "catch" : "ignore");
2295 }
2296
2297 return ERROR_OK;
2298 }
2299
2300 COMMAND_HANDLER(handle_cortex_m_mask_interrupts_command)
2301 {
2302 struct target *target = get_current_target(CMD_CTX);
2303 struct cortex_m_common *cortex_m = target_to_cm(target);
2304 int retval;
2305
2306 static const Jim_Nvp nvp_maskisr_modes[] = {
2307 { .name = "auto", .value = CORTEX_M_ISRMASK_AUTO },
2308 { .name = "off", .value = CORTEX_M_ISRMASK_OFF },
2309 { .name = "on", .value = CORTEX_M_ISRMASK_ON },
2310 { .name = NULL, .value = -1 },
2311 };
2312 const Jim_Nvp *n;
2313
2314
2315 retval = cortex_m_verify_pointer(CMD_CTX, cortex_m);
2316 if (retval != ERROR_OK)
2317 return retval;
2318
2319 if (target->state != TARGET_HALTED) {
2320 command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
2321 return ERROR_OK;
2322 }
2323
2324 if (CMD_ARGC > 0) {
2325 n = Jim_Nvp_name2value_simple(nvp_maskisr_modes, CMD_ARGV[0]);
2326 if (n->name == NULL)
2327 return ERROR_COMMAND_SYNTAX_ERROR;
2328 cortex_m->isrmasking_mode = n->value;
2329
2330
2331 if (cortex_m->isrmasking_mode == CORTEX_M_ISRMASK_ON)
2332 cortex_m_write_debug_halt_mask(target, C_HALT | C_MASKINTS, 0);
2333 else
2334 cortex_m_write_debug_halt_mask(target, C_HALT, C_MASKINTS);
2335 }
2336
2337 n = Jim_Nvp_value2name_simple(nvp_maskisr_modes, cortex_m->isrmasking_mode);
2338 command_print(CMD_CTX, "cortex_m interrupt mask %s", n->name);
2339
2340 return ERROR_OK;
2341 }
2342
2343 COMMAND_HANDLER(handle_cortex_m_reset_config_command)
2344 {
2345 struct target *target = get_current_target(CMD_CTX);
2346 struct cortex_m_common *cortex_m = target_to_cm(target);
2347 int retval;
2348 char *reset_config;
2349
2350 retval = cortex_m_verify_pointer(CMD_CTX, cortex_m);
2351 if (retval != ERROR_OK)
2352 return retval;
2353
2354 if (CMD_ARGC > 0) {
2355 if (strcmp(*CMD_ARGV, "sysresetreq") == 0)
2356 cortex_m->soft_reset_config = CORTEX_M_RESET_SYSRESETREQ;
2357 else if (strcmp(*CMD_ARGV, "vectreset") == 0)
2358 cortex_m->soft_reset_config = CORTEX_M_RESET_VECTRESET;
2359 }
2360
2361 switch (cortex_m->soft_reset_config) {
2362 case CORTEX_M_RESET_SYSRESETREQ:
2363 reset_config = "sysresetreq";
2364 break;
2365
2366 case CORTEX_M_RESET_VECTRESET:
2367 reset_config = "vectreset";
2368 break;
2369
2370 default:
2371 reset_config = "unknown";
2372 break;
2373 }
2374
2375 command_print(CMD_CTX, "cortex_m reset_config %s", reset_config);
2376
2377 return ERROR_OK;
2378 }
2379
2380 static const struct command_registration cortex_m_exec_command_handlers[] = {
2381 {
2382 .name = "maskisr",
2383 .handler = handle_cortex_m_mask_interrupts_command,
2384 .mode = COMMAND_EXEC,
2385 .help = "mask cortex_m interrupts",
2386 .usage = "['auto'|'on'|'off']",
2387 },
2388 {
2389 .name = "vector_catch",
2390 .handler = handle_cortex_m_vector_catch_command,
2391 .mode = COMMAND_EXEC,
2392 .help = "configure hardware vectors to trigger debug entry",
2393 .usage = "['all'|'none'|('bus_err'|'chk_err'|...)*]",
2394 },
2395 {
2396 .name = "reset_config",
2397 .handler = handle_cortex_m_reset_config_command,
2398 .mode = COMMAND_ANY,
2399 .help = "configure software reset handling",
2400 .usage = "['srst'|'sysresetreq'|'vectreset']",
2401 },
2402 COMMAND_REGISTRATION_DONE
2403 };
2404 static const struct command_registration cortex_m_command_handlers[] = {
2405 {
2406 .chain = armv7m_command_handlers,
2407 },
2408 {
2409 .chain = armv7m_trace_command_handlers,
2410 },
2411 {
2412 .name = "cortex_m",
2413 .mode = COMMAND_EXEC,
2414 .help = "Cortex-M command group",
2415 .usage = "",
2416 .chain = cortex_m_exec_command_handlers,
2417 },
2418 COMMAND_REGISTRATION_DONE
2419 };
2420
2421 struct target_type cortexm_target = {
2422 .name = "cortex_m",
2423 .deprecated_name = "cortex_m3",
2424
2425 .poll = cortex_m_poll,
2426 .arch_state = armv7m_arch_state,
2427
2428 .target_request_data = cortex_m_target_request_data,
2429
2430 .halt = cortex_m_halt,
2431 .resume = cortex_m_resume,
2432 .step = cortex_m_step,
2433
2434 .assert_reset = cortex_m_assert_reset,
2435 .deassert_reset = cortex_m_deassert_reset,
2436 .soft_reset_halt = cortex_m_soft_reset_halt,
2437
2438 .get_gdb_reg_list = armv7m_get_gdb_reg_list,
2439
2440 .read_memory = cortex_m_read_memory,
2441 .write_memory = cortex_m_write_memory,
2442 .checksum_memory = armv7m_checksum_memory,
2443 .blank_check_memory = armv7m_blank_check_memory,
2444
2445 .run_algorithm = armv7m_run_algorithm,
2446 .start_algorithm = armv7m_start_algorithm,
2447 .wait_algorithm = armv7m_wait_algorithm,
2448
2449 .add_breakpoint = cortex_m_add_breakpoint,
2450 .remove_breakpoint = cortex_m_remove_breakpoint,
2451 .add_watchpoint = cortex_m_add_watchpoint,
2452 .remove_watchpoint = cortex_m_remove_watchpoint,
2453
2454 .commands = cortex_m_command_handlers,
2455 .target_create = cortex_m_target_create,
2456 .target_jim_configure = adiv5_jim_configure,
2457 .init_target = cortex_m_init_target,
2458 .examine = cortex_m_examine,
2459 .deinit_target = cortex_m_deinit_target,
2460 };
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)