split jim_jtag_command into multiple handlers
[openocd.git] / src / target / cortex_a8.h
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * Copyright (C) 2006 by Magnus Lundin *
6 * lundin@mlu.mine.nu *
7 * *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
10 * *
11 * Copyright (C) 2009 by Dirk Behme *
12 * dirk.behme@gmail.com - copy from cortex_m3 *
13 * *
14 * This program is free software; you can redistribute it and/or modify *
15 * it under the terms of the GNU General Public License as published by *
16 * the Free Software Foundation; either version 2 of the License, or *
17 * (at your option) any later version. *
18 * *
19 * This program is distributed in the hope that it will be useful, *
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
22 * GNU General Public License for more details. *
23 * *
24 * You should have received a copy of the GNU General Public License *
25 * along with this program; if not, write to the *
26 * Free Software Foundation, Inc., *
27 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
28 ***************************************************************************/
29 #ifndef CORTEX_A8_H
30 #define CORTEX_A8_H
31
32 #include "armv7a.h"
33
34 extern char* cortex_a8_state_strings[];
35
36 #define CORTEX_A8_COMMON_MAGIC 0x411fc082
37
38 #define CPUID 0x54011D00
39 /* Debug Control Block */
40 #define CPUDBG_DIDR 0x000
41 #define CPUDBG_WFAR 0x018
42 #define CPUDBG_VCR 0x01C
43 #define CPUDBG_ECR 0x024
44 #define CPUDBG_DSCCR 0x028
45 #define CPUDBG_DTRRX 0x080
46 #define CPUDBG_ITR 0x084
47 #define CPUDBG_DSCR 0x088
48 #define CPUDBG_DTRTX 0x08c
49 #define CPUDBG_DRCR 0x090
50 #define CPUDBG_BVR_BASE 0x100
51 #define CPUDBG_BCR_BASE 0x140
52 #define CPUDBG_WVR_BASE 0x180
53 #define CPUDBG_WCR_BASE 0x1C0
54
55 #define CPUDBG_OSLAR 0x300
56 #define CPUDBG_OSLSR 0x304
57 #define CPUDBG_OSSRR 0x308
58
59 #define CPUDBG_PRCR 0x310
60 #define CPUDBG_PRSR 0x314
61
62 #define CPUDBG_CPUID 0xD00
63 #define CPUDBG_CTYPR 0xD04
64 #define CPUDBG_TTYPR 0xD0C
65 #define CPUDBG_LOCKACCESS 0xFB0
66 #define CPUDBG_LOCKSTATUS 0xFB4
67 #define CPUDBG_AUTHSTATUS 0xFB8
68
69 #define BRP_NORMAL 0
70 #define BRP_CONTEXT 1
71
72 /* DSCR Bit offset */
73 #define DSCR_CORE_HALTED 0
74 #define DSCR_CORE_RESTARTED 1
75 #define DSCR_EXT_INT_EN 13
76 #define DSCR_HALT_DBG_MODE 14
77 #define DSCR_MON_DBG_MODE 15
78 #define DSCR_INSTR_COMP 24
79 #define DSCR_DTR_TX_FULL 29
80 #define DSCR_DTR_RX_FULL 30
81
82 struct cortex_a8_brp
83 {
84 int used;
85 int type;
86 uint32_t value;
87 uint32_t control;
88 uint8_t BRPn;
89 };
90
91 struct cortex_a8_wrp
92 {
93 int used;
94 int type;
95 uint32_t value;
96 uint32_t control;
97 uint8_t WRPn;
98 };
99
100 struct cortex_a8_common
101 {
102 int common_magic;
103 struct arm_jtag jtag_info;
104
105 /* Context information */
106 uint32_t cpudbg_dscr;
107 uint32_t nvic_dfsr; /* Debug Fault Status Register - shows reason for debug halt */
108 uint32_t nvic_icsr; /* Interrupt Control State Register - shows active and pending IRQ */
109
110 /* Saved cp15 registers */
111 uint32_t cp15_control_reg;
112 uint32_t cp15_aux_control_reg;
113
114 /* Breakpoint register pairs */
115 int brp_num_context;
116 int brp_num;
117 int brp_num_available;
118 // int brp_enabled;
119 struct cortex_a8_brp *brp_list;
120
121 /* Watchpoint register pairs */
122 int wrp_num;
123 int wrp_num_available;
124 struct cortex_a8_wrp *wrp_list;
125
126 /* Interrupts */
127 int intlinesnum;
128 uint32_t *intsetenable;
129
130 /* Use cortex_a8_read_regs_through_mem for fast register reads */
131 int fast_reg_read;
132
133 struct armv7a_common armv7a_common;
134 };
135
136 static inline struct cortex_a8_common *
137 target_to_cortex_a8(struct target *target)
138 {
139 return container_of(target->arch_info, struct cortex_a8_common,
140 armv7a_common.armv4_5_common);
141 }
142
143 #endif /* CORTEX_A8_H */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)