Michael Bruck:
[openocd.git] / src / target / arm11.h
1 /***************************************************************************
2 * Copyright (C) 2008 digenius technology GmbH. *
3 * *
4 * This program is free software; you can redistribute it and/or modify *
5 * it under the terms of the GNU General Public License as published by *
6 * the Free Software Foundation; either version 2 of the License, or *
7 * (at your option) any later version. *
8 * *
9 * This program is distributed in the hope that it will be useful, *
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
12 * GNU General Public License for more details. *
13 * *
14 * You should have received a copy of the GNU General Public License *
15 * along with this program; if not, write to the *
16 * Free Software Foundation, Inc., *
17 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
18 ***************************************************************************/
19
20 #ifndef ARM11_H
21 #define ARM11_H
22
23 #include "target.h"
24 #include "register.h"
25 #include "embeddedice.h"
26 #include "arm_jtag.h"
27 #include <stdbool.h>
28
29
30 #define asizeof(x) (sizeof(x) / sizeof((x)[0]))
31
32 #define NEW(type, variable, items) \
33 type * variable = calloc(1, sizeof(type) * items)
34
35
36 #define ARM11_REGCACHE_MODEREGS 0
37 #define ARM11_REGCACHE_FREGS 0
38
39 #define ARM11_REGCACHE_COUNT (20 + \
40 23 * ARM11_REGCACHE_MODEREGS + \
41 9 * ARM11_REGCACHE_FREGS)
42
43
44 typedef struct arm11_register_history_s
45 {
46 u32 value;
47 u8 valid;
48 }arm11_register_history_t;
49
50 enum arm11_debug_version
51 {
52 ARM11_DEBUG_V6 = 0x01,
53 ARM11_DEBUG_V61 = 0x02,
54 ARM11_DEBUG_V7 = 0x03,
55 ARM11_DEBUG_V7_CP14 = 0x04,
56 };
57
58 typedef struct arm11_common_s
59 {
60 target_t * target;
61
62 arm_jtag_t jtag_info;
63
64 /** \name Processor type detection */
65 /*@{*/
66
67 u32 device_id; /**< IDCODE readout */
68 u32 didr; /**< DIDR readout (debug capabilities) */
69 u8 implementor; /**< DIDR Implementor readout */
70
71 size_t brp; /**< Number of Breakpoint Register Pairs from DIDR */
72 size_t wrp; /**< Number of Watchpoint Register Pairs from DIDR */
73
74 enum arm11_debug_version
75 debug_version; /**< ARM debug architecture from DIDR */
76 /*@}*/
77
78
79 u32 last_dscr; /**< Last retrieved DSCR value;
80 * Can be used to detect changes */
81
82 bool trst_active;
83 bool halt_requested;
84 bool simulate_reset_on_next_halt;
85
86 /** \name Shadow registers to save processor state */
87 /*@{*/
88
89 reg_t * reg_list; /**< target register list */
90 u32 reg_values[ARM11_REGCACHE_COUNT]; /**< data for registers */
91
92 /*@}*/
93
94 arm11_register_history_t
95 reg_history[ARM11_REGCACHE_COUNT]; /**< register state before last resume */
96
97
98 size_t free_brps; /**< keep track of breakpoints allocated by arm11_add_breakpoint() */
99 size_t free_wrps; /**< keep track of breakpoints allocated by arm11_add_watchpoint() */
100
101 } arm11_common_t;
102
103
104 /**
105 * ARM11 DBGTAP instructions
106 *
107 * http://infocenter.arm.com/help/topic/com.arm.doc.ddi0301f/I1006229.html
108 */
109 enum arm11_instructions
110 {
111 ARM11_EXTEST = 0x00,
112 ARM11_SCAN_N = 0x02,
113 ARM11_RESTART = 0x04,
114 ARM11_HALT = 0x08,
115 ARM11_INTEST = 0x0C,
116 ARM11_ITRSEL = 0x1D,
117 ARM11_IDCODE = 0x1E,
118 ARM11_BYPASS = 0x1F,
119 };
120
121 enum arm11_dscr
122 {
123 ARM11_DSCR_CORE_HALTED = 1 << 0,
124 ARM11_DSCR_CORE_RESTARTED = 1 << 1,
125
126 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_MASK = 0x0F << 2,
127 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_HALT = 0x00 << 2,
128 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_BREAKPOINT = 0x01 << 2,
129 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_WATCHPOINT = 0x02 << 2,
130 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_BKPT_INSTRUCTION = 0x03 << 2,
131 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_EDBGRQ = 0x04 << 2,
132 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_VECTOR_CATCH = 0x05 << 2,
133
134 ARM11_DSCR_STICKY_PRECISE_DATA_ABORT = 1 << 6,
135 ARM11_DSCR_STICKY_IMPRECISE_DATA_ABORT = 1 << 7,
136 ARM11_DSCR_EXECUTE_ARM_INSTRUCTION_ENABLE = 1 << 13,
137 ARM11_DSCR_MODE_SELECT = 1 << 14,
138 ARM11_DSCR_WDTR_FULL = 1 << 29,
139 ARM11_DSCR_RDTR_FULL = 1 << 30,
140 };
141
142 enum arm11_cpsr
143 {
144 ARM11_CPSR_T = 1 << 5,
145 ARM11_CPSR_J = 1 << 24,
146 };
147
148 enum arm11_sc7
149 {
150 ARM11_SC7_NULL = 0,
151 ARM11_SC7_VCR = 7,
152 ARM11_SC7_PC = 8,
153 ARM11_SC7_BVR0 = 64,
154 ARM11_SC7_BCR0 = 80,
155 ARM11_SC7_WVR0 = 96,
156 ARM11_SC7_WCR0 = 112,
157 };
158
159
160
161 typedef struct arm11_reg_state_s
162 {
163 u32 def_index;
164 target_t * target;
165 } arm11_reg_state_t;
166
167
168
169
170 /* poll current target status */
171 int arm11_poll(struct target_s *target);
172 /* architecture specific status reply */
173 int arm11_arch_state(struct target_s *target);
174
175 /* target request support */
176 int arm11_target_request_data(struct target_s *target, u32 size, u8 *buffer);
177
178 /* target execution control */
179 int arm11_halt(struct target_s *target);
180 int arm11_resume(struct target_s *target, int current, u32 address, int handle_breakpoints, int debug_execution);
181 int arm11_step(struct target_s *target, int current, u32 address, int handle_breakpoints);
182
183 /* target reset control */
184 int arm11_assert_reset(struct target_s *target);
185 int arm11_deassert_reset(struct target_s *target);
186 int arm11_soft_reset_halt(struct target_s *target);
187 int arm11_prepare_reset_halt(struct target_s *target);
188
189 /* target register access for gdb */
190 int arm11_get_gdb_reg_list(struct target_s *target, struct reg_s **reg_list[], int *reg_list_size);
191
192 /* target memory access
193 * size: 1 = byte (8bit), 2 = half-word (16bit), 4 = word (32bit)
194 * count: number of items of <size>
195 */
196 int arm11_read_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer);
197 int arm11_write_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer);
198
199 /* write target memory in multiples of 4 byte, optimized for writing large quantities of data */
200 int arm11_bulk_write_memory(struct target_s *target, u32 address, u32 count, u8 *buffer);
201
202 int arm11_checksum_memory(struct target_s *target, u32 address, u32 count, u32* checksum);
203
204 /* target break-/watchpoint control
205 * rw: 0 = write, 1 = read, 2 = access
206 */
207 int arm11_add_breakpoint(struct target_s *target, breakpoint_t *breakpoint);
208 int arm11_remove_breakpoint(struct target_s *target, breakpoint_t *breakpoint);
209 int arm11_add_watchpoint(struct target_s *target, watchpoint_t *watchpoint);
210 int arm11_remove_watchpoint(struct target_s *target, watchpoint_t *watchpoint);
211
212 /* target algorithm support */
213 int arm11_run_algorithm(struct target_s *target, int num_mem_params, mem_param_t *mem_params, int num_reg_params, reg_param_t *reg_param, u32 entry_point, u32 exit_point, int timeout_ms, void *arch_info);
214
215 int arm11_register_commands(struct command_context_s *cmd_ctx);
216 int arm11_target_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct target_s *target);
217 int arm11_init_target(struct command_context_s *cmd_ctx, struct target_s *target);
218 int arm11_quit(void);
219
220
221 /* helpers */
222 void arm11_build_reg_cache(target_t *target);
223
224 void arm11_record_register_history(arm11_common_t * arm11);
225 void arm11_dump_reg_changes(arm11_common_t * arm11);
226
227
228 /* internals */
229
230 void arm11_setup_field (arm11_common_t * arm11, int num_bits, void * in_data, void * out_data, scan_field_t * field);
231 void arm11_add_IR (arm11_common_t * arm11, u8 instr, enum tap_state state);
232 void arm11_add_debug_SCAN_N (arm11_common_t * arm11, u8 chain, enum tap_state state);
233 void arm11_add_debug_INST (arm11_common_t * arm11, u32 inst, u8 * flag, enum tap_state state);
234 u32 arm11_read_DSCR (arm11_common_t * arm11);
235 void arm11_write_DSCR (arm11_common_t * arm11, u32 dscr);
236
237 enum target_debug_reason arm11_get_DSCR_debug_reason(u32 dscr);
238
239 void arm11_run_instr_data_prepare (arm11_common_t * arm11);
240 void arm11_run_instr_data_finish (arm11_common_t * arm11);
241 void arm11_run_instr_no_data (arm11_common_t * arm11, u32 * opcode, size_t count);
242 void arm11_run_instr_no_data1 (arm11_common_t * arm11, u32 opcode);
243 void arm11_run_instr_data_to_core (arm11_common_t * arm11, u32 opcode, u32 * data, size_t count);
244 void arm11_run_instr_data_to_core_noack (arm11_common_t * arm11, u32 opcode, u32 * data, size_t count);
245 void arm11_run_instr_data_to_core1 (arm11_common_t * arm11, u32 opcode, u32 data);
246 void arm11_run_instr_data_from_core (arm11_common_t * arm11, u32 opcode, u32 * data, size_t count);
247 void arm11_run_instr_data_from_core_via_r0 (arm11_common_t * arm11, u32 opcode, u32 * data);
248 void arm11_run_instr_data_to_core_via_r0 (arm11_common_t * arm11, u32 opcode, u32 data);
249
250 int arm11_add_dr_scan_vc(int num_fields, scan_field_t *fields, enum tap_state state);
251 int arm11_add_ir_scan_vc(int num_fields, scan_field_t *fields, enum tap_state state);
252
253
254 /** Used to make a list of read/write commands for scan chain 7
255 *
256 * Use with arm11_sc7_run()
257 */
258 typedef struct arm11_sc7_action_s
259 {
260 bool write; /**< Access mode: true for write, false for read. */
261 u8 address; /**< Register address mode. Use enum #arm11_sc7 */
262 u32 value; /**< If write then set this to value to be written.
263 In read mode this receives the read value when the
264 function returns. */
265 } arm11_sc7_action_t;
266
267 void arm11_sc7_run(arm11_common_t * arm11, arm11_sc7_action_t * actions, size_t count);
268
269 /* Mid-level helper functions */
270 void arm11_sc7_clear_vbw(arm11_common_t * arm11);
271 void arm11_sc7_set_vcr(arm11_common_t * arm11, u32 value);
272
273 void arm11_read_memory_word(arm11_common_t * arm11, u32 address, u32 * result);
274
275
276
277 #endif /* ARM11_H */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)