The bitbang driver leaves the TCK 0 when in idle
[openocd.git] / src / target / arm11.h
1 /***************************************************************************
2 * Copyright (C) 2008 digenius technology GmbH. *
3 * *
4 * This program is free software; you can redistribute it and/or modify *
5 * it under the terms of the GNU General Public License as published by *
6 * the Free Software Foundation; either version 2 of the License, or *
7 * (at your option) any later version. *
8 * *
9 * This program is distributed in the hope that it will be useful, *
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
12 * GNU General Public License for more details. *
13 * *
14 * You should have received a copy of the GNU General Public License *
15 * along with this program; if not, write to the *
16 * Free Software Foundation, Inc., *
17 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
18 ***************************************************************************/
19
20 #ifndef ARM11_H
21 #define ARM11_H
22
23 #include "target.h"
24 #include "register.h"
25 #include "embeddedice.h"
26 #include "arm_jtag.h"
27 #include <stdbool.h>
28
29
30 #define asizeof(x) (sizeof(x) / sizeof((x)[0]))
31
32 #define NEW(type, variable, items) \
33 type * variable = calloc(1, sizeof(type) * items)
34
35
36 /* For MinGW use 'I' prefix to print size_t (instead of 'z') */
37
38 #ifndef __MSVCRT__
39 #define ZU "%zu"
40 #else
41 #define ZU "%Iu"
42 #endif
43
44
45 #define ARM11_REGCACHE_MODEREGS 0
46 #define ARM11_REGCACHE_FREGS 0
47
48 #define ARM11_REGCACHE_COUNT (20 + \
49 23 * ARM11_REGCACHE_MODEREGS + \
50 9 * ARM11_REGCACHE_FREGS)
51
52
53 typedef struct arm11_register_history_s
54 {
55 u32 value;
56 u8 valid;
57 }arm11_register_history_t;
58
59 enum arm11_debug_version
60 {
61 ARM11_DEBUG_V6 = 0x01,
62 ARM11_DEBUG_V61 = 0x02,
63 ARM11_DEBUG_V7 = 0x03,
64 ARM11_DEBUG_V7_CP14 = 0x04,
65 };
66
67 typedef struct arm11_common_s
68 {
69 target_t * target;
70
71 arm_jtag_t jtag_info;
72
73 /** \name Processor type detection */
74 /*@{*/
75
76 u32 device_id; /**< IDCODE readout */
77 u32 didr; /**< DIDR readout (debug capabilities) */
78 u8 implementor; /**< DIDR Implementor readout */
79
80 size_t brp; /**< Number of Breakpoint Register Pairs from DIDR */
81 size_t wrp; /**< Number of Watchpoint Register Pairs from DIDR */
82
83 enum arm11_debug_version
84 debug_version; /**< ARM debug architecture from DIDR */
85 /*@}*/
86
87
88 u32 last_dscr; /**< Last retrieved DSCR value;
89 * Can be used to detect changes */
90
91 bool trst_active;
92 bool halt_requested;
93 bool simulate_reset_on_next_halt;
94
95 /** \name Shadow registers to save processor state */
96 /*@{*/
97
98 reg_t * reg_list; /**< target register list */
99 u32 reg_values[ARM11_REGCACHE_COUNT]; /**< data for registers */
100
101 /*@}*/
102
103 arm11_register_history_t
104 reg_history[ARM11_REGCACHE_COUNT]; /**< register state before last resume */
105
106
107 size_t free_brps; /**< keep track of breakpoints allocated by arm11_add_breakpoint() */
108 size_t free_wrps; /**< keep track of breakpoints allocated by arm11_add_watchpoint() */
109
110 } arm11_common_t;
111
112
113 /**
114 * ARM11 DBGTAP instructions
115 *
116 * http://infocenter.arm.com/help/topic/com.arm.doc.ddi0301f/I1006229.html
117 */
118 enum arm11_instructions
119 {
120 ARM11_EXTEST = 0x00,
121 ARM11_SCAN_N = 0x02,
122 ARM11_RESTART = 0x04,
123 ARM11_HALT = 0x08,
124 ARM11_INTEST = 0x0C,
125 ARM11_ITRSEL = 0x1D,
126 ARM11_IDCODE = 0x1E,
127 ARM11_BYPASS = 0x1F,
128 };
129
130 enum arm11_dscr
131 {
132 ARM11_DSCR_CORE_HALTED = 1 << 0,
133 ARM11_DSCR_CORE_RESTARTED = 1 << 1,
134
135 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_MASK = 0x0F << 2,
136 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_HALT = 0x00 << 2,
137 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_BREAKPOINT = 0x01 << 2,
138 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_WATCHPOINT = 0x02 << 2,
139 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_BKPT_INSTRUCTION = 0x03 << 2,
140 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_EDBGRQ = 0x04 << 2,
141 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_VECTOR_CATCH = 0x05 << 2,
142
143 ARM11_DSCR_STICKY_PRECISE_DATA_ABORT = 1 << 6,
144 ARM11_DSCR_STICKY_IMPRECISE_DATA_ABORT = 1 << 7,
145 ARM11_DSCR_EXECUTE_ARM_INSTRUCTION_ENABLE = 1 << 13,
146 ARM11_DSCR_MODE_SELECT = 1 << 14,
147 ARM11_DSCR_WDTR_FULL = 1 << 29,
148 ARM11_DSCR_RDTR_FULL = 1 << 30,
149 };
150
151 enum arm11_cpsr
152 {
153 ARM11_CPSR_T = 1 << 5,
154 ARM11_CPSR_J = 1 << 24,
155 };
156
157 enum arm11_sc7
158 {
159 ARM11_SC7_NULL = 0,
160 ARM11_SC7_VCR = 7,
161 ARM11_SC7_PC = 8,
162 ARM11_SC7_BVR0 = 64,
163 ARM11_SC7_BCR0 = 80,
164 ARM11_SC7_WVR0 = 96,
165 ARM11_SC7_WCR0 = 112,
166 };
167
168
169
170 typedef struct arm11_reg_state_s
171 {
172 u32 def_index;
173 target_t * target;
174 } arm11_reg_state_t;
175
176
177
178
179 /* poll current target status */
180 int arm11_poll(struct target_s *target);
181 /* architecture specific status reply */
182 int arm11_arch_state(struct target_s *target);
183
184 /* target request support */
185 int arm11_target_request_data(struct target_s *target, u32 size, u8 *buffer);
186
187 /* target execution control */
188 int arm11_halt(struct target_s *target);
189 int arm11_resume(struct target_s *target, int current, u32 address, int handle_breakpoints, int debug_execution);
190 int arm11_step(struct target_s *target, int current, u32 address, int handle_breakpoints);
191
192 /* target reset control */
193 int arm11_assert_reset(struct target_s *target);
194 int arm11_deassert_reset(struct target_s *target);
195 int arm11_soft_reset_halt(struct target_s *target);
196 int arm11_prepare_reset_halt(struct target_s *target);
197
198 /* target register access for gdb */
199 int arm11_get_gdb_reg_list(struct target_s *target, struct reg_s **reg_list[], int *reg_list_size);
200
201 /* target memory access
202 * size: 1 = byte (8bit), 2 = half-word (16bit), 4 = word (32bit)
203 * count: number of items of <size>
204 */
205 int arm11_read_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer);
206 int arm11_write_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer);
207
208 /* write target memory in multiples of 4 byte, optimized for writing large quantities of data */
209 int arm11_bulk_write_memory(struct target_s *target, u32 address, u32 count, u8 *buffer);
210
211 int arm11_checksum_memory(struct target_s *target, u32 address, u32 count, u32* checksum);
212
213 /* target break-/watchpoint control
214 * rw: 0 = write, 1 = read, 2 = access
215 */
216 int arm11_add_breakpoint(struct target_s *target, breakpoint_t *breakpoint);
217 int arm11_remove_breakpoint(struct target_s *target, breakpoint_t *breakpoint);
218 int arm11_add_watchpoint(struct target_s *target, watchpoint_t *watchpoint);
219 int arm11_remove_watchpoint(struct target_s *target, watchpoint_t *watchpoint);
220
221 /* target algorithm support */
222 int arm11_run_algorithm(struct target_s *target, int num_mem_params, mem_param_t *mem_params, int num_reg_params, reg_param_t *reg_param, u32 entry_point, u32 exit_point, int timeout_ms, void *arch_info);
223
224 int arm11_register_commands(struct command_context_s *cmd_ctx);
225 int arm11_target_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct target_s *target);
226 int arm11_init_target(struct command_context_s *cmd_ctx, struct target_s *target);
227 int arm11_quit(void);
228
229
230 /* helpers */
231 void arm11_build_reg_cache(target_t *target);
232
233 void arm11_record_register_history(arm11_common_t * arm11);
234 void arm11_dump_reg_changes(arm11_common_t * arm11);
235
236
237 /* internals */
238
239 void arm11_setup_field (arm11_common_t * arm11, int num_bits, void * in_data, void * out_data, scan_field_t * field);
240 void arm11_add_IR (arm11_common_t * arm11, u8 instr, enum tap_state state);
241 void arm11_add_debug_SCAN_N (arm11_common_t * arm11, u8 chain, enum tap_state state);
242 void arm11_add_debug_INST (arm11_common_t * arm11, u32 inst, u8 * flag, enum tap_state state);
243 u32 arm11_read_DSCR (arm11_common_t * arm11);
244 void arm11_write_DSCR (arm11_common_t * arm11, u32 dscr);
245
246 enum target_debug_reason arm11_get_DSCR_debug_reason(u32 dscr);
247
248 void arm11_run_instr_data_prepare (arm11_common_t * arm11);
249 void arm11_run_instr_data_finish (arm11_common_t * arm11);
250 void arm11_run_instr_no_data (arm11_common_t * arm11, u32 * opcode, size_t count);
251 void arm11_run_instr_no_data1 (arm11_common_t * arm11, u32 opcode);
252 void arm11_run_instr_data_to_core (arm11_common_t * arm11, u32 opcode, u32 * data, size_t count);
253 void arm11_run_instr_data_to_core_noack (arm11_common_t * arm11, u32 opcode, u32 * data, size_t count);
254 void arm11_run_instr_data_to_core1 (arm11_common_t * arm11, u32 opcode, u32 data);
255 void arm11_run_instr_data_from_core (arm11_common_t * arm11, u32 opcode, u32 * data, size_t count);
256 void arm11_run_instr_data_from_core_via_r0 (arm11_common_t * arm11, u32 opcode, u32 * data);
257 void arm11_run_instr_data_to_core_via_r0 (arm11_common_t * arm11, u32 opcode, u32 data);
258
259 int arm11_add_dr_scan_vc(int num_fields, scan_field_t *fields, enum tap_state state);
260 int arm11_add_ir_scan_vc(int num_fields, scan_field_t *fields, enum tap_state state);
261
262
263 /** Used to make a list of read/write commands for scan chain 7
264 *
265 * Use with arm11_sc7_run()
266 */
267 typedef struct arm11_sc7_action_s
268 {
269 bool write; /**< Access mode: true for write, false for read. */
270 u8 address; /**< Register address mode. Use enum #arm11_sc7 */
271 u32 value; /**< If write then set this to value to be written.
272 In read mode this receives the read value when the
273 function returns. */
274 } arm11_sc7_action_t;
275
276 void arm11_sc7_run(arm11_common_t * arm11, arm11_sc7_action_t * actions, size_t count);
277
278 /* Mid-level helper functions */
279 void arm11_sc7_clear_vbw(arm11_common_t * arm11);
280 void arm11_sc7_set_vcr(arm11_common_t * arm11, u32 value);
281
282 void arm11_read_memory_word(arm11_common_t * arm11, u32 address, u32 * result);
283
284
285
286 #endif /* ARM11_H */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)