jtag: linuxgpiod: drop extra parenthesis
[openocd.git] / src / target / arc.h
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2
3 /***************************************************************************
4 * Copyright (C) 2013-2015,2019-2020 Synopsys, Inc. *
5 * Frank Dols <frank.dols@synopsys.com> *
6 * Mischa Jonker <mischa.jonker@synopsys.com> *
7 * Anton Kolesov <anton.kolesov@synopsys.com> *
8 * Evgeniy Didin <didin@synopsys.com> *
9 ***************************************************************************/
10
11 #ifndef OPENOCD_TARGET_ARC_H
12 #define OPENOCD_TARGET_ARC_H
13
14 #include <helper/time_support.h>
15 #include <jtag/jtag.h>
16
17 #include "algorithm.h"
18 #include "breakpoints.h"
19 #include "jtag/interface.h"
20 #include "register.h"
21 #include "target.h"
22 #include "target_request.h"
23 #include "target_type.h"
24 #include "helper/bits.h"
25
26 #include "arc_jtag.h"
27 #include "arc_cmd.h"
28 #include "arc_mem.h"
29
30 #define ARC_COMMON_MAGIC 0xB32EB324U /* just a unique number */
31
32 #define AUX_DEBUG_REG 0x5
33 #define AUX_PC_REG 0x6
34 #define AUX_STATUS32_REG 0xA
35
36
37 #define SET_CORE_FORCE_HALT BIT(1)
38 #define SET_CORE_HALT_BIT BIT(0) /* STATUS32[0] = H field */
39 #define SET_CORE_ENABLE_INTERRUPTS BIT(31)
40 /* STATUS32[5] or AE bit indicates if the processor is in exception state */
41 #define SET_CORE_AE_BIT BIT(5)
42 /* Single instruction step bit in Debug register */
43 #define SET_CORE_SINGLE_INSTR_STEP BIT(11)
44
45 #define AUX_STATUS32_REG_HALT_BIT BIT(0)
46 #define AUX_STATUS32_REG_IE_BIT BIT(31) /* STATUS32[31] = IE field */
47
48 /* ARC register numbers */
49 enum {
50 ARC_R0,
51 ARC_R1,
52 ARC_R2,
53 ARC_R3,
54 ARC_R4,
55 ARC_R5,
56 ARC_R6,
57 ARC_R7,
58 ARC_R8,
59 ARC_R9,
60 ARC_R10,
61 ARC_R11,
62 ARC_R12,
63 ARC_R13,
64 ARC_R14,
65 ARC_R15,
66 ARC_R16,
67 ARC_R17,
68 ARC_R18,
69 ARC_R19,
70 ARC_R20,
71 ARC_R21,
72 ARC_R22,
73 ARC_R23,
74 ARC_R24,
75 ARC_R25,
76 ARC_GP = 26,
77 ARC_FP = 27,
78 ARC_SP = 28,
79 ARC_ILINK = 29,
80 ARC_R30,
81 ARC_BLINK = 31,
82 ARC_LP_COUNT = 60,
83
84 /* Reserved registers */
85 ARC_R61 = 61,
86 ARC_R62 = 62,
87
88 ARC_PCL = 63,
89 ARC_PC = 64,
90 ARC_LP_START = 65,
91 ARC_LP_END = 66,
92 ARC_STATUS32 = 67,
93 };
94
95 #define CORE_REG_MAX_NUMBER (63)
96
97 /* Limit reg_type/reg_type_field name to 20 symbols */
98 #define REG_TYPE_MAX_NAME_LENGTH 20
99
100 /* ARC 32bits opcodes */
101 #define ARC_SDBBP_32 0x256F003FU /* BRK */
102
103 /* ARC 16bits opcodes */
104 #define ARC_SDBBP_16 0x7FFF /* BRK_S */
105
106 /* Cache registers */
107 #define AUX_IC_IVIC_REG 0X10
108 #define IC_IVIC_INVALIDATE 0XFFFFFFFF
109
110 #define AUX_DC_IVDC_REG 0X47
111 #define DC_IVDC_INVALIDATE BIT(0)
112 #define AUX_DC_CTRL_REG 0X48
113 #define DC_CTRL_IM BIT(6)
114
115 /* L2 cache registers */
116 #define SLC_AUX_CACHE_CTRL 0x903
117 #define L2_CTRL_IM BIT(6)
118 #define L2_CTRL_BS BIT(8) /* Busy flag */
119 #define SLC_AUX_CACHE_FLUSH 0x904
120 #define L2_FLUSH_FL BIT(0)
121 #define SLC_AUX_CACHE_INV 0x905
122 #define L2_INV_IV BIT(0)
123
124 /* Action Point */
125 #define AP_AC_AT_INST_ADDR 0x0
126 #define AP_AC_AT_MEMORY_ADDR 0x2
127 #define AP_AC_AT_AUXREG_ADDR 0x4
128
129 #define AP_AC_TT_DISABLE 0x00
130 #define AP_AC_TT_WRITE 0x10
131 #define AP_AC_TT_READ 0x20
132 #define AP_AC_TT_READWRITE 0x30
133
134 struct arc_reg_bitfield {
135 struct reg_data_type_bitfield bitfield;
136 char name[REG_TYPE_MAX_NAME_LENGTH];
137 };
138 /* Register data type */
139 struct arc_reg_data_type {
140 struct list_head list;
141 struct reg_data_type data_type;
142 struct reg_data_type_flags data_type_flags;
143 struct reg_data_type_struct data_type_struct;
144 char data_type_id[REG_TYPE_MAX_NAME_LENGTH];
145 struct arc_reg_bitfield *bitfields;
146 union {
147 struct reg_data_type_struct_field *reg_type_struct_field;
148 struct reg_data_type_flags_field *reg_type_flags_field;
149 };
150 };
151
152 /* Standard GDB register types */
153 static const struct reg_data_type standard_gdb_types[] = {
154 { .type = REG_TYPE_INT, .id = "int" },
155 { .type = REG_TYPE_INT8, .id = "int8" },
156 { .type = REG_TYPE_INT16, .id = "int16" },
157 { .type = REG_TYPE_INT32, .id = "int32" },
158 { .type = REG_TYPE_INT64, .id = "int64" },
159 { .type = REG_TYPE_INT128, .id = "int128" },
160 { .type = REG_TYPE_UINT8, .id = "uint8" },
161 { .type = REG_TYPE_UINT16, .id = "uint16" },
162 { .type = REG_TYPE_UINT32, .id = "uint32" },
163 { .type = REG_TYPE_UINT64, .id = "uint64" },
164 { .type = REG_TYPE_UINT128, .id = "uint128" },
165 { .type = REG_TYPE_CODE_PTR, .id = "code_ptr" },
166 { .type = REG_TYPE_DATA_PTR, .id = "data_ptr" },
167 { .type = REG_TYPE_FLOAT, .id = "float" },
168 { .type = REG_TYPE_IEEE_SINGLE, .id = "ieee_single" },
169 { .type = REG_TYPE_IEEE_DOUBLE, .id = "ieee_double" },
170 };
171
172 enum arc_actionpointype {
173 ARC_AP_BREAKPOINT,
174 ARC_AP_WATCHPOINT,
175 };
176
177 /* Actionpoint related fields */
178 struct arc_actionpoint {
179 int used;
180 uint32_t bp_value;
181 uint32_t reg_address;
182 enum arc_actionpointype type;
183 };
184
185 struct arc_common {
186 unsigned int common_magic;
187
188 struct arc_jtag jtag_info;
189
190 struct reg_cache *core_and_aux_cache;
191 struct reg_cache *bcr_cache;
192
193 /* Cache control */
194 bool has_dcache;
195 bool has_icache;
196 bool has_l2cache;
197 /* If true, then D$ has been already flushed since core has been
198 * halted. */
199 bool dcache_flushed;
200 /* If true, then L2 has been already flushed since core has been
201 * halted. */
202 bool l2cache_flushed;
203 /* If true, then caches have been already flushed since core has been
204 * halted. */
205 bool icache_invalidated;
206 bool dcache_invalidated;
207 bool l2cache_invalidated;
208
209 /* Indicate if cache was built (for deinit function) */
210 bool core_aux_cache_built;
211 bool bcr_cache_built;
212 /* Closely Coupled memory(CCM) regions for performance-critical
213 * code (optional). */
214 uint32_t iccm0_start;
215 uint32_t iccm0_end;
216 uint32_t iccm1_start;
217 uint32_t iccm1_end;
218 uint32_t dccm_start;
219 uint32_t dccm_end;
220
221 int irq_state;
222
223 /* Register descriptions */
224 struct list_head reg_data_types;
225 struct list_head core_reg_descriptions;
226 struct list_head aux_reg_descriptions;
227 struct list_head bcr_reg_descriptions;
228 unsigned long num_regs;
229 unsigned long num_core_regs;
230 unsigned long num_aux_regs;
231 unsigned long num_bcr_regs;
232 unsigned long last_general_reg;
233
234 /* PC register location in register cache. */
235 unsigned long pc_index_in_cache;
236 /* DEBUG register location in register cache. */
237 unsigned long debug_index_in_cache;
238
239 /* Actionpoints */
240 unsigned int actionpoints_num;
241 unsigned int actionpoints_num_avail;
242 struct arc_actionpoint *actionpoints_list;
243 };
244
245 /* Borrowed from nds32.h */
246 #define CHECK_RETVAL(action) \
247 do { \
248 int __retval = (action); \
249 if (__retval != ERROR_OK) { \
250 LOG_DEBUG("error while calling \"%s\"", \
251 # action); \
252 return __retval; \
253 } \
254 } while (0)
255
256 static inline struct arc_common *target_to_arc(struct target *target)
257 {
258 return target->arch_info;
259 }
260
261 /* ----- Inlined functions ------------------------------------------------- */
262
263 /**
264 * Convert data in host endianness to the middle endian. This is required to
265 * write 4-byte instructions.
266 */
267 static inline void arc_h_u32_to_me(uint8_t *buf, int val)
268 {
269 buf[1] = (uint8_t) (val >> 24);
270 buf[0] = (uint8_t) (val >> 16);
271 buf[3] = (uint8_t) (val >> 8);
272 buf[2] = (uint8_t) (val >> 0);
273 }
274
275 /**
276 * Convert data in middle endian to host endian. This is required to read 32-bit
277 * instruction from little endian ARCs.
278 */
279 static inline uint32_t arc_me_to_h_u32(const uint8_t *buf)
280 {
281 return (uint32_t)(buf[2] | buf[3] << 8 | buf[0] << 16 | buf[1] << 24);
282 }
283
284
285 /* ARC Register description */
286 struct arc_reg_desc {
287
288 struct target *target;
289
290 /* Register name */
291 char *name;
292
293 /* Actual place of storing reg_value */
294 uint8_t reg_value[4];
295
296 /* Actual place of storing register feature */
297 struct reg_feature feature;
298
299 /* GDB XML feature */
300 char *gdb_xml_feature;
301
302 /* Is this a register in g/G-packet? */
303 bool is_general;
304
305 /* Architectural number: core reg num or AUX reg num */
306 uint32_t arch_num;
307
308 /* Core or AUX register? */
309 bool is_core;
310
311 /* Build configuration register? */
312 bool is_bcr;
313
314 /* Data type */
315 struct reg_data_type *data_type;
316
317 struct list_head list;
318 };
319
320 /* Error codes */
321 #define ERROR_ARC_REGISTER_NOT_FOUND (-700)
322 #define ERROR_ARC_REGISTER_FIELD_NOT_FOUND (-701)
323 #define ERROR_ARC_REGISTER_IS_NOT_STRUCT (-702)
324 #define ERROR_ARC_FIELD_IS_NOT_BITFIELD (-703)
325 #define ERROR_ARC_REGTYPE_NOT_FOUND (-704)
326
327 void free_reg_desc(struct arc_reg_desc *r);
328
329
330 void arc_reg_data_type_add(struct target *target,
331 struct arc_reg_data_type *data_type);
332
333 int arc_reg_add(struct target *target, struct arc_reg_desc *arc_reg,
334 const char * const type_name, const size_t type_name_len);
335
336 struct reg *arc_reg_get_by_name(struct reg_cache *first,
337 const char *name, bool search_all);
338
339 int arc_reg_get_field(struct target *target, const char *reg_name,
340 const char *field_name, uint32_t *value_ptr);
341
342 int arc_cache_flush(struct target *target);
343 int arc_cache_invalidate(struct target *target);
344
345 int arc_add_auxreg_actionpoint(struct target *target,
346 uint32_t auxreg_addr, uint32_t transaction);
347 int arc_remove_auxreg_actionpoint(struct target *target, uint32_t auxreg_addr);
348 int arc_set_actionpoints_num(struct target *target, uint32_t ap_num);
349
350 #endif /* OPENOCD_TARGET_ARC_H */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)