src/jtag/drivers/OpenULINK/src/protocol.c

   1 /***************************************************************************
   2  *   Copyright (C) 2011 by Martin Schmoelzer                               *
   3  *   <martin.schmoelzer@student.tuwien.ac.at>                              *
   4  *                                                                         *
   5  *   This program is free software; you can redistribute it and/or modify  *
   6  *   it under the terms of the GNU General Public License as published by  *
   7  *   the Free Software Foundation; either version 2 of the License, or     *
   8  *   (at your option) any later version.                                   *
   9  *                                                                         *
  10  *   This program is distributed in the hope that it will be useful,       *
  11  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
  12  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
  13  *   GNU General Public License for more details.                          *
  14  *                                                                         *
  15  *   You should have received a copy of the GNU General Public License     *
  16  *   along with this program; if not, write to the                         *
  17  *   Free Software Foundation, Inc.,                                       *
  18  *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
  19  ***************************************************************************/
  20
  21 #include "protocol.h"
  22 #include "jtag.h"
  23 #include "delay.h"
  24 #include "usb.h"
  25 #include "io.h"
  26 #include "msgtypes.h"
  27
  28 #include "reg_ezusb.h"
  29
  30 /**
  31  * @file
  32  * Implementation of the OpenULINK communication protocol.
  33  *
  34  * The OpenULINK protocol uses one OUT and one IN endpoint. These two endpoints
  35  * are configured to use the maximum packet size for full-speed transfers,
  36  * 64 bytes. Commands always start with a command ID (see msgtypes.h for
  37  * command ID definitions) and contain zero or more payload data bytes in both
  38  * transfer directions (IN and OUT). The payload
  39  *
  40  * Almost all commands contain a fixed number of payload data bytes. The number
  41  * of payload data bytes for the IN and OUT direction does not need to be the
  42  * same.
  43  *
  44  * Multiple commands may be sent in one EP2 Bulk-OUT packet. Because the
  45  * OpenULINK firmware does not perform bounds checking for EP2 Bulk-IN packets,
  46  * the host MUST ensure that the commands sent in the OUT packet require a
  47  * maximum of 64 bytes of IN data.
  48  */
  49
  50 /** Index in EP2 Bulk-OUT data buffer that contains the current command ID */
  51 volatile uint8_t cmd_id_index;
  52
  53 /** Number of data bytes already in EP2 Bulk-IN buffer */
  54 volatile uint8_t payload_index_in;
  55
  56 /**
  57  * Execute a SET_LEDS command.
  58  */
  59 void execute_set_led_command(void)
  60 {
  61         uint8_t led_state = OUT2BUF[cmd_id_index + 1];
  62
  63         if (led_state & RUN_LED_ON)
  64                 SET_RUN_LED();
  65
  66         if (led_state & COM_LED_ON)
  67                 SET_COM_LED();
  68
  69         if (led_state & RUN_LED_OFF)
  70                 CLEAR_RUN_LED();
  71
  72         if (led_state & COM_LED_OFF)
  73                 CLEAR_COM_LED();
  74 }
  75
  76 /**
  77  * Executes one command and updates global command indexes.
  78  *
  79  * @return true if this command was the last command.
  80  * @return false if there are more commands within the current contents of the
  81  * Bulk EP2-OUT data buffer.
  82  */
  83 bool execute_command(void)
  84 {
  85         uint8_t usb_out_bytecount, usb_in_bytecount;
  86         uint16_t signal_state;
  87         uint16_t count;
  88
  89         /* Most commands do not transfer IN data. To save code space, we write 0 to
  90          * usb_in_bytecount here, then modify it in the switch statement below where
  91          * neccessary */
  92         usb_in_bytecount = 0;
  93
  94         switch (OUT2BUF[cmd_id_index] /* Command ID */) {
  95                 case CMD_SCAN_IN:
  96                         usb_out_bytecount = 5;
  97                         usb_in_bytecount = OUT2BUF[cmd_id_index + 1];
  98                         jtag_scan_in(cmd_id_index + 1, payload_index_in);
  99                         break;
 100                 case CMD_SCAN_OUT:
 101                         usb_out_bytecount = OUT2BUF[cmd_id_index + 1] + 5;
 102                         jtag_scan_out(cmd_id_index + 1);
 103                         break;
 104                 case CMD_SCAN_IO:
 105                         usb_in_bytecount = OUT2BUF[cmd_id_index + 1];
 106                         usb_out_bytecount = usb_in_bytecount + 5;
 107                         jtag_scan_io(cmd_id_index + 1, payload_index_in);
 108                         break;
 109                 case CMD_CLOCK_TMS:
 110                         usb_out_bytecount = 2;
 111                         jtag_clock_tms(OUT2BUF[cmd_id_index + 1], OUT2BUF[cmd_id_index + 2]);
 112                         break;
 113                 case CMD_CLOCK_TCK:
 114                         usb_out_bytecount = 2;
 115                         count = (uint16_t)OUT2BUF[cmd_id_index + 1];
 116                         count |= ((uint16_t)OUT2BUF[cmd_id_index + 2]) << 8;
 117                         jtag_clock_tck(count);
 118                         break;
 119                 case CMD_SLOW_SCAN_IN:
 120                         usb_out_bytecount = 5;
 121                         usb_in_bytecount = OUT2BUF[cmd_id_index + 1];
 122                         jtag_slow_scan_in(cmd_id_index + 1, payload_index_in);
 123                         break;
 124                 case CMD_SLOW_SCAN_OUT:
 125                         usb_out_bytecount = OUT2BUF[cmd_id_index + 1] + 5;
 126                         jtag_slow_scan_out(cmd_id_index + 1);
 127                         break;
 128                 case CMD_SLOW_SCAN_IO:
 129                         usb_in_bytecount = OUT2BUF[cmd_id_index + 1];
 130                         usb_out_bytecount = usb_in_bytecount + 5;
 131                         jtag_slow_scan_io(cmd_id_index + 1, payload_index_in);
 132                         break;
 133                 case CMD_SLOW_CLOCK_TMS:
 134                         usb_out_bytecount = 2;
 135                         jtag_slow_clock_tms(OUT2BUF[cmd_id_index + 1], OUT2BUF[cmd_id_index + 2]);
 136                         break;
 137                 case CMD_SLOW_CLOCK_TCK:
 138                         usb_out_bytecount = 2;
 139                         count = (uint16_t)OUT2BUF[cmd_id_index + 1];
 140                         count |= ((uint16_t)OUT2BUF[cmd_id_index + 2]) << 8;
 141                         jtag_slow_clock_tck(count);
 142                         break;
 143                 case CMD_SLEEP_US:
 144                         usb_out_bytecount = 2;
 145                         count = (uint16_t)OUT2BUF[cmd_id_index + 1];
 146                         count |= ((uint16_t)OUT2BUF[cmd_id_index + 2]) << 8;
 147                         delay_us(count);
 148                         break;
 149                 case CMD_SLEEP_MS:
 150                         usb_out_bytecount = 2;
 151                         count = (uint16_t)OUT2BUF[cmd_id_index + 1];
 152                         count |= ((uint16_t)OUT2BUF[cmd_id_index + 2]) << 8;
 153                         delay_ms(count);
 154                         break;
 155                 case CMD_GET_SIGNALS:
 156                         usb_out_bytecount = 0;
 157                         usb_in_bytecount = 2;
 158                         signal_state = jtag_get_signals();
 159                         IN2BUF[payload_index_in] = (signal_state >> 8) & 0x00FF;
 160                         IN2BUF[payload_index_in + 1] = signal_state & 0x00FF;
 161                         break;
 162                 case CMD_SET_SIGNALS:
 163                         usb_out_bytecount = 2;
 164                         jtag_set_signals(OUT2BUF[cmd_id_index + 1], OUT2BUF[cmd_id_index + 2]);
 165                         break;
 166                 case CMD_CONFIGURE_TCK_FREQ:
 167                         usb_out_bytecount = 5;
 168                         jtag_configure_tck_delay(
 169                         OUT2BUF[cmd_id_index + 1],      /* scan_in */
 170                         OUT2BUF[cmd_id_index + 2],      /* scan_out */
 171                         OUT2BUF[cmd_id_index + 3],      /* scan_io */
 172                         OUT2BUF[cmd_id_index + 4],      /* clock_tck */
 173                         OUT2BUF[cmd_id_index + 5]);     /* clock_tms */
 174                         break;
 175                 case CMD_SET_LEDS:
 176                         usb_out_bytecount = 1;
 177                         execute_set_led_command();
 178                         break;
 179                 case CMD_TEST:
 180                         usb_out_bytecount = 1;
 181                         /* Do nothing... This command is only used to test if the device is ready
 182                          * to accept new commands */
 183                         break;
 184                 default:
 185                         /* Should never be reached */
 186                         usb_out_bytecount = 0;
 187                         break;
 188         }
 189
 190         /* Update EP2 Bulk-IN data byte count */
 191         payload_index_in += usb_in_bytecount;
 192
 193         /* Determine if this was the last command */
 194         if ((cmd_id_index + usb_out_bytecount + 1) >= OUT2BC)
 195                 return true;
 196         else {
 197                 /* Not the last command, update cmd_id_index */
 198                 cmd_id_index += (usb_out_bytecount + 1);
 199                 return false;
 200         }
 201 }
 202
 203 /**
 204  * Forever wait for commands and execute them as they arrive.
 205  */
 206 void command_loop(void)
 207 {
 208         bool last_command;
 209
 210         while (1) {
 211                 cmd_id_index = 0;
 212                 payload_index_in = 0;
 213
 214                 /* Wait until host sends EP2 Bulk-OUT packet */
 215                 while (!EP2_out)
 216                         ;
 217                 EP2_out = 0;
 218
 219                 /* Turn on COM LED to indicate command execution */
 220                 SET_COM_LED();
 221
 222                 /* Execute the commands */
 223                 last_command = false;
 224                 while (last_command == false)
 225                         last_command = execute_command();
 226
 227                 CLEAR_COM_LED();
 228
 229                 /* Send back EP2 Bulk-IN packet if required */
 230                 if (payload_index_in > 0) {
 231                         IN2BC = payload_index_in;
 232                         while (!EP2_in)
 233                                 ;
 234                         EP2_in = 0;
 235                 }
 236
 237                 /* Re-arm EP2-OUT after command execution */
 238                 OUT2BC = 0;
 239         }
 240 }