df4afeb9d42d157085d19c44553683f69c038a9d
[openocd.git] / src / jtag / core.c
1 /***************************************************************************
2 * Copyright (C) 2009 Zachary T Welch *
3 * zw@superlucidity.net *
4 * *
5 * Copyright (C) 2007,2008,2009 Øyvind Harboe *
6 * oyvind.harboe@zylin.com *
7 * *
8 * Copyright (C) 2009 SoftPLC Corporation *
9 * http://softplc.com *
10 * dick@softplc.com *
11 * *
12 * Copyright (C) 2005 by Dominic Rath *
13 * Dominic.Rath@gmx.de *
14 * *
15 * This program is free software; you can redistribute it and/or modify *
16 * it under the terms of the GNU General Public License as published by *
17 * the Free Software Foundation; either version 2 of the License, or *
18 * (at your option) any later version. *
19 * *
20 * This program is distributed in the hope that it will be useful, *
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
23 * GNU General Public License for more details. *
24 * *
25 * You should have received a copy of the GNU General Public License *
26 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
27 ***************************************************************************/
28
29 #ifdef HAVE_CONFIG_H
30 #include "config.h"
31 #endif
32
33 #include "jtag.h"
34 #include "swd.h"
35 #include "interface.h"
36 #include <transport/transport.h>
37 #include <helper/jep106.h>
38
39 #ifdef HAVE_STRINGS_H
40 #include <strings.h>
41 #endif
42
43 /* SVF and XSVF are higher level JTAG command sets (for boundary scan) */
44 #include "svf/svf.h"
45 #include "xsvf/xsvf.h"
46
47 /** The number of JTAG queue flushes (for profiling and debugging purposes). */
48 static int jtag_flush_queue_count;
49
50 /* Sleep this # of ms after flushing the queue */
51 static int jtag_flush_queue_sleep;
52
53 static void jtag_add_scan_check(struct jtag_tap *active,
54 void (*jtag_add_scan)(struct jtag_tap *active,
55 int in_num_fields,
56 const struct scan_field *in_fields,
57 tap_state_t state),
58 int in_num_fields, struct scan_field *in_fields, tap_state_t state);
59
60 /**
61 * The jtag_error variable is set when an error occurs while executing
62 * the queue. Application code may set this using jtag_set_error(),
63 * when an error occurs during processing that should be reported during
64 * jtag_execute_queue().
65 *
66 * The value is set and cleared, but never read by normal application code.
67 *
68 * This value is returned (and cleared) by jtag_execute_queue().
69 */
70 static int jtag_error = ERROR_OK;
71
72 static const char *jtag_event_strings[] = {
73 [JTAG_TRST_ASSERTED] = "TAP reset",
74 [JTAG_TAP_EVENT_SETUP] = "TAP setup",
75 [JTAG_TAP_EVENT_ENABLE] = "TAP enabled",
76 [JTAG_TAP_EVENT_DISABLE] = "TAP disabled",
77 };
78
79 /*
80 * JTAG adapters must initialize with TRST and SRST de-asserted
81 * (they're negative logic, so that means *high*). But some
82 * hardware doesn't necessarily work that way ... so set things
83 * up so that jtag_init() always forces that state.
84 */
85 static int jtag_trst = -1;
86 static int jtag_srst = -1;
87
88 /**
89 * List all TAPs that have been created.
90 */
91 static struct jtag_tap *__jtag_all_taps;
92
93 static enum reset_types jtag_reset_config = RESET_NONE;
94 tap_state_t cmd_queue_cur_state = TAP_RESET;
95
96 static bool jtag_verify_capture_ir = true;
97 static int jtag_verify = 1;
98
99 /* how long the OpenOCD should wait before attempting JTAG communication after reset lines
100 *deasserted (in ms) */
101 static int adapter_nsrst_delay; /* default to no nSRST delay */
102 static int jtag_ntrst_delay;/* default to no nTRST delay */
103 static int adapter_nsrst_assert_width; /* width of assertion */
104 static int jtag_ntrst_assert_width; /* width of assertion */
105
106 /**
107 * Contains a single callback along with a pointer that will be passed
108 * when an event occurs.
109 */
110 struct jtag_event_callback {
111 /** a event callback */
112 jtag_event_handler_t callback;
113 /** the private data to pass to the callback */
114 void *priv;
115 /** the next callback */
116 struct jtag_event_callback *next;
117 };
118
119 /* callbacks to inform high-level handlers about JTAG state changes */
120 static struct jtag_event_callback *jtag_event_callbacks;
121
122 /* speed in kHz*/
123 static int speed_khz;
124 /* speed to fallback to when RCLK is requested but not supported */
125 static int rclk_fallback_speed_khz;
126 static enum {CLOCK_MODE_UNSELECTED, CLOCK_MODE_KHZ, CLOCK_MODE_RCLK} clock_mode;
127 static int jtag_speed;
128
129 static struct jtag_interface *jtag;
130
131 /* configuration */
132 struct jtag_interface *jtag_interface;
133
134 void jtag_set_flush_queue_sleep(int ms)
135 {
136 jtag_flush_queue_sleep = ms;
137 }
138
139 void jtag_set_error(int error)
140 {
141 if ((error == ERROR_OK) || (jtag_error != ERROR_OK))
142 return;
143 jtag_error = error;
144 }
145
146 int jtag_error_clear(void)
147 {
148 int temp = jtag_error;
149 jtag_error = ERROR_OK;
150 return temp;
151 }
152
153 /************/
154
155 static bool jtag_poll = 1;
156
157 bool is_jtag_poll_safe(void)
158 {
159 /* Polling can be disabled explicitly with set_enabled(false).
160 * It is also implicitly disabled while TRST is active and
161 * while SRST is gating the JTAG clock.
162 */
163 if (!transport_is_jtag())
164 return jtag_poll;
165
166 if (!jtag_poll || jtag_trst != 0)
167 return false;
168 return jtag_srst == 0 || (jtag_reset_config & RESET_SRST_NO_GATING);
169 }
170
171 bool jtag_poll_get_enabled(void)
172 {
173 return jtag_poll;
174 }
175
176 void jtag_poll_set_enabled(bool value)
177 {
178 jtag_poll = value;
179 }
180
181 /************/
182
183 struct jtag_tap *jtag_all_taps(void)
184 {
185 return __jtag_all_taps;
186 };
187
188 unsigned jtag_tap_count(void)
189 {
190 struct jtag_tap *t = jtag_all_taps();
191 unsigned n = 0;
192 while (t) {
193 n++;
194 t = t->next_tap;
195 }
196 return n;
197 }
198
199 unsigned jtag_tap_count_enabled(void)
200 {
201 struct jtag_tap *t = jtag_all_taps();
202 unsigned n = 0;
203 while (t) {
204 if (t->enabled)
205 n++;
206 t = t->next_tap;
207 }
208 return n;
209 }
210
211 /** Append a new TAP to the chain of all taps. */
212 void jtag_tap_add(struct jtag_tap *t)
213 {
214 unsigned jtag_num_taps = 0;
215
216 struct jtag_tap **tap = &__jtag_all_taps;
217 while (*tap != NULL) {
218 jtag_num_taps++;
219 tap = &(*tap)->next_tap;
220 }
221 *tap = t;
222 t->abs_chain_position = jtag_num_taps;
223 }
224
225 /* returns a pointer to the n-th device in the scan chain */
226 struct jtag_tap *jtag_tap_by_position(unsigned n)
227 {
228 struct jtag_tap *t = jtag_all_taps();
229
230 while (t && n-- > 0)
231 t = t->next_tap;
232
233 return t;
234 }
235
236 struct jtag_tap *jtag_tap_by_string(const char *s)
237 {
238 /* try by name first */
239 struct jtag_tap *t = jtag_all_taps();
240
241 while (t) {
242 if (0 == strcmp(t->dotted_name, s))
243 return t;
244 t = t->next_tap;
245 }
246
247 /* no tap found by name, so try to parse the name as a number */
248 unsigned n;
249 if (parse_uint(s, &n) != ERROR_OK)
250 return NULL;
251
252 /* FIXME remove this numeric fallback code late June 2010, along
253 * with all info in the User's Guide that TAPs have numeric IDs.
254 * Also update "scan_chain" output to not display the numbers.
255 */
256 t = jtag_tap_by_position(n);
257 if (t)
258 LOG_WARNING("Specify TAP '%s' by name, not number %u",
259 t->dotted_name, n);
260
261 return t;
262 }
263
264 struct jtag_tap *jtag_tap_next_enabled(struct jtag_tap *p)
265 {
266 p = p ? p->next_tap : jtag_all_taps();
267 while (p) {
268 if (p->enabled)
269 return p;
270 p = p->next_tap;
271 }
272 return NULL;
273 }
274
275 const char *jtag_tap_name(const struct jtag_tap *tap)
276 {
277 return (tap == NULL) ? "(unknown)" : tap->dotted_name;
278 }
279
280
281 int jtag_register_event_callback(jtag_event_handler_t callback, void *priv)
282 {
283 struct jtag_event_callback **callbacks_p = &jtag_event_callbacks;
284
285 if (callback == NULL)
286 return ERROR_COMMAND_SYNTAX_ERROR;
287
288 if (*callbacks_p) {
289 while ((*callbacks_p)->next)
290 callbacks_p = &((*callbacks_p)->next);
291 callbacks_p = &((*callbacks_p)->next);
292 }
293
294 (*callbacks_p) = malloc(sizeof(struct jtag_event_callback));
295 (*callbacks_p)->callback = callback;
296 (*callbacks_p)->priv = priv;
297 (*callbacks_p)->next = NULL;
298
299 return ERROR_OK;
300 }
301
302 int jtag_unregister_event_callback(jtag_event_handler_t callback, void *priv)
303 {
304 struct jtag_event_callback **p = &jtag_event_callbacks, *temp;
305
306 if (callback == NULL)
307 return ERROR_COMMAND_SYNTAX_ERROR;
308
309 while (*p) {
310 if (((*p)->priv != priv) || ((*p)->callback != callback)) {
311 p = &(*p)->next;
312 continue;
313 }
314
315 temp = *p;
316 *p = (*p)->next;
317 free(temp);
318 }
319
320 return ERROR_OK;
321 }
322
323 int jtag_call_event_callbacks(enum jtag_event event)
324 {
325 struct jtag_event_callback *callback = jtag_event_callbacks;
326
327 LOG_DEBUG("jtag event: %s", jtag_event_strings[event]);
328
329 while (callback) {
330 struct jtag_event_callback *next;
331
332 /* callback may remove itself */
333 next = callback->next;
334 callback->callback(event, callback->priv);
335 callback = next;
336 }
337
338 return ERROR_OK;
339 }
340
341 static void jtag_checks(void)
342 {
343 assert(jtag_trst == 0);
344 }
345
346 static void jtag_prelude(tap_state_t state)
347 {
348 jtag_checks();
349
350 assert(state != TAP_INVALID);
351
352 cmd_queue_cur_state = state;
353 }
354
355 void jtag_add_ir_scan_noverify(struct jtag_tap *active, const struct scan_field *in_fields,
356 tap_state_t state)
357 {
358 jtag_prelude(state);
359
360 int retval = interface_jtag_add_ir_scan(active, in_fields, state);
361 jtag_set_error(retval);
362 }
363
364 static void jtag_add_ir_scan_noverify_callback(struct jtag_tap *active,
365 int dummy,
366 const struct scan_field *in_fields,
367 tap_state_t state)
368 {
369 jtag_add_ir_scan_noverify(active, in_fields, state);
370 }
371
372 /* If fields->in_value is filled out, then the captured IR value will be checked */
373 void jtag_add_ir_scan(struct jtag_tap *active, struct scan_field *in_fields, tap_state_t state)
374 {
375 assert(state != TAP_RESET);
376
377 if (jtag_verify && jtag_verify_capture_ir) {
378 /* 8 x 32 bit id's is enough for all invocations */
379
380 /* if we are to run a verification of the ir scan, we need to get the input back.
381 * We may have to allocate space if the caller didn't ask for the input back.
382 */
383 in_fields->check_value = active->expected;
384 in_fields->check_mask = active->expected_mask;
385 jtag_add_scan_check(active, jtag_add_ir_scan_noverify_callback, 1, in_fields,
386 state);
387 } else
388 jtag_add_ir_scan_noverify(active, in_fields, state);
389 }
390
391 void jtag_add_plain_ir_scan(int num_bits, const uint8_t *out_bits, uint8_t *in_bits,
392 tap_state_t state)
393 {
394 assert(out_bits != NULL);
395 assert(state != TAP_RESET);
396
397 jtag_prelude(state);
398
399 int retval = interface_jtag_add_plain_ir_scan(
400 num_bits, out_bits, in_bits, state);
401 jtag_set_error(retval);
402 }
403
404 static int jtag_check_value_inner(uint8_t *captured, uint8_t *in_check_value,
405 uint8_t *in_check_mask, int num_bits);
406
407 static int jtag_check_value_mask_callback(jtag_callback_data_t data0,
408 jtag_callback_data_t data1,
409 jtag_callback_data_t data2,
410 jtag_callback_data_t data3)
411 {
412 return jtag_check_value_inner((uint8_t *)data0,
413 (uint8_t *)data1,
414 (uint8_t *)data2,
415 (int)data3);
416 }
417
418 static void jtag_add_scan_check(struct jtag_tap *active, void (*jtag_add_scan)(
419 struct jtag_tap *active,
420 int in_num_fields,
421 const struct scan_field *in_fields,
422 tap_state_t state),
423 int in_num_fields, struct scan_field *in_fields, tap_state_t state)
424 {
425 jtag_add_scan(active, in_num_fields, in_fields, state);
426
427 for (int i = 0; i < in_num_fields; i++) {
428 if ((in_fields[i].check_value != NULL) && (in_fields[i].in_value != NULL)) {
429 /* this is synchronous for a minidriver */
430 jtag_add_callback4(jtag_check_value_mask_callback,
431 (jtag_callback_data_t)in_fields[i].in_value,
432 (jtag_callback_data_t)in_fields[i].check_value,
433 (jtag_callback_data_t)in_fields[i].check_mask,
434 (jtag_callback_data_t)in_fields[i].num_bits);
435 }
436 }
437 }
438
439 void jtag_add_dr_scan_check(struct jtag_tap *active,
440 int in_num_fields,
441 struct scan_field *in_fields,
442 tap_state_t state)
443 {
444 if (jtag_verify)
445 jtag_add_scan_check(active, jtag_add_dr_scan, in_num_fields, in_fields, state);
446 else
447 jtag_add_dr_scan(active, in_num_fields, in_fields, state);
448 }
449
450
451 void jtag_add_dr_scan(struct jtag_tap *active,
452 int in_num_fields,
453 const struct scan_field *in_fields,
454 tap_state_t state)
455 {
456 assert(state != TAP_RESET);
457
458 jtag_prelude(state);
459
460 int retval;
461 retval = interface_jtag_add_dr_scan(active, in_num_fields, in_fields, state);
462 jtag_set_error(retval);
463 }
464
465 void jtag_add_plain_dr_scan(int num_bits, const uint8_t *out_bits, uint8_t *in_bits,
466 tap_state_t state)
467 {
468 assert(out_bits != NULL);
469 assert(state != TAP_RESET);
470
471 jtag_prelude(state);
472
473 int retval;
474 retval = interface_jtag_add_plain_dr_scan(num_bits, out_bits, in_bits, state);
475 jtag_set_error(retval);
476 }
477
478 void jtag_add_tlr(void)
479 {
480 jtag_prelude(TAP_RESET);
481 jtag_set_error(interface_jtag_add_tlr());
482
483 /* NOTE: order here matches TRST path in jtag_add_reset() */
484 jtag_call_event_callbacks(JTAG_TRST_ASSERTED);
485 jtag_notify_event(JTAG_TRST_ASSERTED);
486 }
487
488 /**
489 * If supported by the underlying adapter, this clocks a raw bit sequence
490 * onto TMS for switching betwen JTAG and SWD modes.
491 *
492 * DO NOT use this to bypass the integrity checks and logging provided
493 * by the jtag_add_pathmove() and jtag_add_statemove() calls.
494 *
495 * @param nbits How many bits to clock out.
496 * @param seq The bit sequence. The LSB is bit 0 of seq[0].
497 * @param state The JTAG tap state to record on completion. Use
498 * TAP_INVALID to represent being in in SWD mode.
499 *
500 * @todo Update naming conventions to stop assuming everything is JTAG.
501 */
502 int jtag_add_tms_seq(unsigned nbits, const uint8_t *seq, enum tap_state state)
503 {
504 int retval;
505
506 if (!(jtag->supported & DEBUG_CAP_TMS_SEQ))
507 return ERROR_JTAG_NOT_IMPLEMENTED;
508
509 jtag_checks();
510 cmd_queue_cur_state = state;
511
512 retval = interface_add_tms_seq(nbits, seq, state);
513 jtag_set_error(retval);
514 return retval;
515 }
516
517 void jtag_add_pathmove(int num_states, const tap_state_t *path)
518 {
519 tap_state_t cur_state = cmd_queue_cur_state;
520
521 /* the last state has to be a stable state */
522 if (!tap_is_state_stable(path[num_states - 1])) {
523 LOG_ERROR("BUG: TAP path doesn't finish in a stable state");
524 jtag_set_error(ERROR_JTAG_NOT_STABLE_STATE);
525 return;
526 }
527
528 for (int i = 0; i < num_states; i++) {
529 if (path[i] == TAP_RESET) {
530 LOG_ERROR("BUG: TAP_RESET is not a valid state for pathmove sequences");
531 jtag_set_error(ERROR_JTAG_STATE_INVALID);
532 return;
533 }
534
535 if (tap_state_transition(cur_state, true) != path[i] &&
536 tap_state_transition(cur_state, false) != path[i]) {
537 LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition",
538 tap_state_name(cur_state), tap_state_name(path[i]));
539 jtag_set_error(ERROR_JTAG_TRANSITION_INVALID);
540 return;
541 }
542 cur_state = path[i];
543 }
544
545 jtag_checks();
546
547 jtag_set_error(interface_jtag_add_pathmove(num_states, path));
548 cmd_queue_cur_state = path[num_states - 1];
549 }
550
551 int jtag_add_statemove(tap_state_t goal_state)
552 {
553 tap_state_t cur_state = cmd_queue_cur_state;
554
555 if (goal_state != cur_state) {
556 LOG_DEBUG("cur_state=%s goal_state=%s",
557 tap_state_name(cur_state),
558 tap_state_name(goal_state));
559 }
560
561 /* If goal is RESET, be paranoid and force that that transition
562 * (e.g. five TCK cycles, TMS high). Else trust "cur_state".
563 */
564 if (goal_state == TAP_RESET)
565 jtag_add_tlr();
566 else if (goal_state == cur_state)
567 /* nothing to do */;
568
569 else if (tap_is_state_stable(cur_state) && tap_is_state_stable(goal_state)) {
570 unsigned tms_bits = tap_get_tms_path(cur_state, goal_state);
571 unsigned tms_count = tap_get_tms_path_len(cur_state, goal_state);
572 tap_state_t moves[8];
573 assert(tms_count < ARRAY_SIZE(moves));
574
575 for (unsigned i = 0; i < tms_count; i++, tms_bits >>= 1) {
576 bool bit = tms_bits & 1;
577
578 cur_state = tap_state_transition(cur_state, bit);
579 moves[i] = cur_state;
580 }
581
582 jtag_add_pathmove(tms_count, moves);
583 } else if (tap_state_transition(cur_state, true) == goal_state
584 || tap_state_transition(cur_state, false) == goal_state)
585 jtag_add_pathmove(1, &goal_state);
586 else
587 return ERROR_FAIL;
588
589 return ERROR_OK;
590 }
591
592 void jtag_add_runtest(int num_cycles, tap_state_t state)
593 {
594 jtag_prelude(state);
595 jtag_set_error(interface_jtag_add_runtest(num_cycles, state));
596 }
597
598
599 void jtag_add_clocks(int num_cycles)
600 {
601 if (!tap_is_state_stable(cmd_queue_cur_state)) {
602 LOG_ERROR("jtag_add_clocks() called with TAP in unstable state \"%s\"",
603 tap_state_name(cmd_queue_cur_state));
604 jtag_set_error(ERROR_JTAG_NOT_STABLE_STATE);
605 return;
606 }
607
608 if (num_cycles > 0) {
609 jtag_checks();
610 jtag_set_error(interface_jtag_add_clocks(num_cycles));
611 }
612 }
613
614 void swd_add_reset(int req_srst)
615 {
616 if (req_srst) {
617 if (!(jtag_reset_config & RESET_HAS_SRST)) {
618 LOG_ERROR("BUG: can't assert SRST");
619 jtag_set_error(ERROR_FAIL);
620 return;
621 }
622 req_srst = 1;
623 }
624
625 /* Maybe change SRST signal state */
626 if (jtag_srst != req_srst) {
627 int retval;
628
629 retval = interface_jtag_add_reset(0, req_srst);
630 if (retval != ERROR_OK)
631 jtag_set_error(retval);
632 else
633 retval = jtag_execute_queue();
634
635 if (retval != ERROR_OK) {
636 LOG_ERROR("TRST/SRST error");
637 return;
638 }
639
640 /* SRST resets everything hooked up to that signal */
641 jtag_srst = req_srst;
642 if (jtag_srst) {
643 LOG_DEBUG("SRST line asserted");
644 if (adapter_nsrst_assert_width)
645 jtag_add_sleep(adapter_nsrst_assert_width * 1000);
646 } else {
647 LOG_DEBUG("SRST line released");
648 if (adapter_nsrst_delay)
649 jtag_add_sleep(adapter_nsrst_delay * 1000);
650 }
651
652 retval = jtag_execute_queue();
653 if (retval != ERROR_OK) {
654 LOG_ERROR("SRST timings error");
655 return;
656 }
657 }
658 }
659
660 void jtag_add_reset(int req_tlr_or_trst, int req_srst)
661 {
662 int trst_with_tlr = 0;
663 int new_srst = 0;
664 int new_trst = 0;
665
666 /* Without SRST, we must use target-specific JTAG operations
667 * on each target; callers should not be requesting SRST when
668 * that signal doesn't exist.
669 *
670 * RESET_SRST_PULLS_TRST is a board or chip level quirk, which
671 * can kick in even if the JTAG adapter can't drive TRST.
672 */
673 if (req_srst) {
674 if (!(jtag_reset_config & RESET_HAS_SRST)) {
675 LOG_ERROR("BUG: can't assert SRST");
676 jtag_set_error(ERROR_FAIL);
677 return;
678 }
679 if ((jtag_reset_config & RESET_SRST_PULLS_TRST) != 0
680 && !req_tlr_or_trst) {
681 LOG_ERROR("BUG: can't assert only SRST");
682 jtag_set_error(ERROR_FAIL);
683 return;
684 }
685 new_srst = 1;
686 }
687
688 /* JTAG reset (entry to TAP_RESET state) can always be achieved
689 * using TCK and TMS; that may go through a TAP_{IR,DR}UPDATE
690 * state first. TRST accelerates it, and bypasses those states.
691 *
692 * RESET_TRST_PULLS_SRST is a board or chip level quirk, which
693 * can kick in even if the JTAG adapter can't drive SRST.
694 */
695 if (req_tlr_or_trst) {
696 if (!(jtag_reset_config & RESET_HAS_TRST))
697 trst_with_tlr = 1;
698 else if ((jtag_reset_config & RESET_TRST_PULLS_SRST) != 0
699 && !req_srst)
700 trst_with_tlr = 1;
701 else
702 new_trst = 1;
703 }
704
705 /* Maybe change TRST and/or SRST signal state */
706 if (jtag_srst != new_srst || jtag_trst != new_trst) {
707 int retval;
708
709 retval = interface_jtag_add_reset(new_trst, new_srst);
710 if (retval != ERROR_OK)
711 jtag_set_error(retval);
712 else
713 retval = jtag_execute_queue();
714
715 if (retval != ERROR_OK) {
716 LOG_ERROR("TRST/SRST error");
717 return;
718 }
719 }
720
721 /* SRST resets everything hooked up to that signal */
722 if (jtag_srst != new_srst) {
723 jtag_srst = new_srst;
724 if (jtag_srst) {
725 LOG_DEBUG("SRST line asserted");
726 if (adapter_nsrst_assert_width)
727 jtag_add_sleep(adapter_nsrst_assert_width * 1000);
728 } else {
729 LOG_DEBUG("SRST line released");
730 if (adapter_nsrst_delay)
731 jtag_add_sleep(adapter_nsrst_delay * 1000);
732 }
733 }
734
735 /* Maybe enter the JTAG TAP_RESET state ...
736 * - using only TMS, TCK, and the JTAG state machine
737 * - or else more directly, using TRST
738 *
739 * TAP_RESET should be invisible to non-debug parts of the system.
740 */
741 if (trst_with_tlr) {
742 LOG_DEBUG("JTAG reset with TLR instead of TRST");
743 jtag_add_tlr();
744
745 } else if (jtag_trst != new_trst) {
746 jtag_trst = new_trst;
747 if (jtag_trst) {
748 LOG_DEBUG("TRST line asserted");
749 tap_set_state(TAP_RESET);
750 if (jtag_ntrst_assert_width)
751 jtag_add_sleep(jtag_ntrst_assert_width * 1000);
752 } else {
753 LOG_DEBUG("TRST line released");
754 if (jtag_ntrst_delay)
755 jtag_add_sleep(jtag_ntrst_delay * 1000);
756
757 /* We just asserted nTRST, so we're now in TAP_RESET.
758 * Inform possible listeners about this, now that
759 * JTAG instructions and data can be shifted. This
760 * sequence must match jtag_add_tlr().
761 */
762 jtag_call_event_callbacks(JTAG_TRST_ASSERTED);
763 jtag_notify_event(JTAG_TRST_ASSERTED);
764 }
765 }
766 }
767
768 void jtag_add_sleep(uint32_t us)
769 {
770 /** @todo Here, keep_alive() appears to be a layering violation!!! */
771 keep_alive();
772 jtag_set_error(interface_jtag_add_sleep(us));
773 }
774
775 static int jtag_check_value_inner(uint8_t *captured, uint8_t *in_check_value,
776 uint8_t *in_check_mask, int num_bits)
777 {
778 int retval = ERROR_OK;
779 int compare_failed;
780
781 if (in_check_mask)
782 compare_failed = buf_cmp_mask(captured, in_check_value, in_check_mask, num_bits);
783 else
784 compare_failed = buf_cmp(captured, in_check_value, num_bits);
785
786 if (compare_failed) {
787 char *captured_str, *in_check_value_str;
788 int bits = (num_bits > DEBUG_JTAG_IOZ) ? DEBUG_JTAG_IOZ : num_bits;
789
790 /* NOTE: we've lost diagnostic context here -- 'which tap' */
791
792 captured_str = buf_to_str(captured, bits, 16);
793 in_check_value_str = buf_to_str(in_check_value, bits, 16);
794
795 LOG_WARNING("Bad value '%s' captured during DR or IR scan:",
796 captured_str);
797 LOG_WARNING(" check_value: 0x%s", in_check_value_str);
798
799 free(captured_str);
800 free(in_check_value_str);
801
802 if (in_check_mask) {
803 char *in_check_mask_str;
804
805 in_check_mask_str = buf_to_str(in_check_mask, bits, 16);
806 LOG_WARNING(" check_mask: 0x%s", in_check_mask_str);
807 free(in_check_mask_str);
808 }
809
810 retval = ERROR_JTAG_QUEUE_FAILED;
811 }
812 return retval;
813 }
814
815 void jtag_check_value_mask(struct scan_field *field, uint8_t *value, uint8_t *mask)
816 {
817 assert(field->in_value != NULL);
818
819 if (value == NULL) {
820 /* no checking to do */
821 return;
822 }
823
824 jtag_execute_queue_noclear();
825
826 int retval = jtag_check_value_inner(field->in_value, value, mask, field->num_bits);
827 jtag_set_error(retval);
828 }
829
830 int default_interface_jtag_execute_queue(void)
831 {
832 if (NULL == jtag) {
833 LOG_ERROR("No JTAG interface configured yet. "
834 "Issue 'init' command in startup scripts "
835 "before communicating with targets.");
836 return ERROR_FAIL;
837 }
838
839 return jtag->execute_queue();
840 }
841
842 void jtag_execute_queue_noclear(void)
843 {
844 jtag_flush_queue_count++;
845 jtag_set_error(interface_jtag_execute_queue());
846
847 if (jtag_flush_queue_sleep > 0) {
848 /* For debug purposes it can be useful to test performance
849 * or behavior when delaying after flushing the queue,
850 * e.g. to simulate long roundtrip times.
851 */
852 usleep(jtag_flush_queue_sleep * 1000);
853 }
854 }
855
856 int jtag_get_flush_queue_count(void)
857 {
858 return jtag_flush_queue_count;
859 }
860
861 int jtag_execute_queue(void)
862 {
863 jtag_execute_queue_noclear();
864 return jtag_error_clear();
865 }
866
867 static int jtag_reset_callback(enum jtag_event event, void *priv)
868 {
869 struct jtag_tap *tap = priv;
870
871 if (event == JTAG_TRST_ASSERTED) {
872 tap->enabled = !tap->disabled_after_reset;
873
874 /* current instruction is either BYPASS or IDCODE */
875 buf_set_ones(tap->cur_instr, tap->ir_length);
876 tap->bypass = 1;
877 }
878
879 return ERROR_OK;
880 }
881
882 /* sleep at least us microseconds. When we sleep more than 1000ms we
883 * do an alive sleep, i.e. keep GDB alive. Note that we could starve
884 * GDB if we slept for <1000ms many times.
885 */
886 void jtag_sleep(uint32_t us)
887 {
888 if (us < 1000)
889 usleep(us);
890 else
891 alive_sleep((us+999)/1000);
892 }
893
894 #define JTAG_MAX_AUTO_TAPS 20
895
896 #define EXTRACT_JEP106_BANK(X) (((X) & 0xf00) >> 8)
897 #define EXTRACT_JEP106_ID(X) (((X) & 0xfe) >> 1)
898 #define EXTRACT_MFG(X) (((X) & 0xffe) >> 1)
899 #define EXTRACT_PART(X) (((X) & 0xffff000) >> 12)
900 #define EXTRACT_VER(X) (((X) & 0xf0000000) >> 28)
901
902 /* A reserved manufacturer ID is used in END_OF_CHAIN_FLAG, so we
903 * know that no valid TAP will have it as an IDCODE value.
904 */
905 #define END_OF_CHAIN_FLAG 0xffffffff
906
907 /* a larger IR length than we ever expect to autoprobe */
908 #define JTAG_IRLEN_MAX 60
909
910 static int jtag_examine_chain_execute(uint8_t *idcode_buffer, unsigned num_idcode)
911 {
912 struct scan_field field = {
913 .num_bits = num_idcode * 32,
914 .out_value = idcode_buffer,
915 .in_value = idcode_buffer,
916 };
917
918 /* initialize to the end of chain ID value */
919 for (unsigned i = 0; i < num_idcode; i++)
920 buf_set_u32(idcode_buffer, i * 32, 32, END_OF_CHAIN_FLAG);
921
922 jtag_add_plain_dr_scan(field.num_bits, field.out_value, field.in_value, TAP_DRPAUSE);
923 jtag_add_tlr();
924 return jtag_execute_queue();
925 }
926
927 static bool jtag_examine_chain_check(uint8_t *idcodes, unsigned count)
928 {
929 uint8_t zero_check = 0x0;
930 uint8_t one_check = 0xff;
931
932 for (unsigned i = 0; i < count * 4; i++) {
933 zero_check |= idcodes[i];
934 one_check &= idcodes[i];
935 }
936
937 /* if there wasn't a single non-zero bit or if all bits were one,
938 * the scan is not valid. We wrote a mix of both values; either
939 *
940 * - There's a hardware issue (almost certainly):
941 * + all-zeroes can mean a target stuck in JTAG reset
942 * + all-ones tends to mean no target
943 * - The scan chain is WAY longer than we can handle, *AND* either
944 * + there are several hundreds of TAPs in bypass, or
945 * + at least a few dozen TAPs all have an all-ones IDCODE
946 */
947 if (zero_check == 0x00 || one_check == 0xff) {
948 LOG_ERROR("JTAG scan chain interrogation failed: all %s",
949 (zero_check == 0x00) ? "zeroes" : "ones");
950 LOG_ERROR("Check JTAG interface, timings, target power, etc.");
951 return false;
952 }
953 return true;
954 }
955
956 static void jtag_examine_chain_display(enum log_levels level, const char *msg,
957 const char *name, uint32_t idcode)
958 {
959 log_printf_lf(level, __FILE__, __LINE__, __func__,
960 "JTAG tap: %s %16.16s: 0x%08x "
961 "(mfg: 0x%3.3x (%s), part: 0x%4.4x, ver: 0x%1.1x)",
962 name, msg,
963 (unsigned int)idcode,
964 (unsigned int)EXTRACT_MFG(idcode),
965 jep106_manufacturer(EXTRACT_JEP106_BANK(idcode), EXTRACT_JEP106_ID(idcode)),
966 (unsigned int)EXTRACT_PART(idcode),
967 (unsigned int)EXTRACT_VER(idcode));
968 }
969
970 static bool jtag_idcode_is_final(uint32_t idcode)
971 {
972 /*
973 * Some devices, such as AVR8, will output all 1's instead
974 * of TDI input value at end of chain. Allow those values
975 * instead of failing.
976 */
977 return idcode == END_OF_CHAIN_FLAG;
978 }
979
980 /**
981 * This helper checks that remaining bits in the examined chain data are
982 * all as expected, but a single JTAG device requires only 64 bits to be
983 * read back correctly. This can help identify and diagnose problems
984 * with the JTAG chain earlier, gives more helpful/explicit error messages.
985 * Returns TRUE iff garbage was found.
986 */
987 static bool jtag_examine_chain_end(uint8_t *idcodes, unsigned count, unsigned max)
988 {
989 bool triggered = false;
990 for (; count < max - 31; count += 32) {
991 uint32_t idcode = buf_get_u32(idcodes, count, 32);
992
993 /* do not trigger the warning if the data looks good */
994 if (jtag_idcode_is_final(idcode))
995 continue;
996 LOG_WARNING("Unexpected idcode after end of chain: %d 0x%08x",
997 count, (unsigned int)idcode);
998 triggered = true;
999 }
1000 return triggered;
1001 }
1002
1003 static bool jtag_examine_chain_match_tap(const struct jtag_tap *tap)
1004 {
1005
1006 if (tap->expected_ids_cnt == 0 || !tap->hasidcode)
1007 return true;
1008
1009 /* optionally ignore the JTAG version field - bits 28-31 of IDCODE */
1010 uint32_t mask = tap->ignore_version ? ~(0xf << 28) : ~0;
1011 uint32_t idcode = tap->idcode & mask;
1012
1013 /* Loop over the expected identification codes and test for a match */
1014 for (unsigned ii = 0; ii < tap->expected_ids_cnt; ii++) {
1015 uint32_t expected = tap->expected_ids[ii] & mask;
1016
1017 if (idcode == expected)
1018 return true;
1019
1020 /* treat "-expected-id 0" as a "don't-warn" wildcard */
1021 if (0 == tap->expected_ids[ii])
1022 return true;
1023 }
1024
1025 /* If none of the expected ids matched, warn */
1026 jtag_examine_chain_display(LOG_LVL_WARNING, "UNEXPECTED",
1027 tap->dotted_name, tap->idcode);
1028 for (unsigned ii = 0; ii < tap->expected_ids_cnt; ii++) {
1029 char msg[32];
1030
1031 snprintf(msg, sizeof(msg), "expected %u of %u", ii + 1, tap->expected_ids_cnt);
1032 jtag_examine_chain_display(LOG_LVL_ERROR, msg,
1033 tap->dotted_name, tap->expected_ids[ii]);
1034 }
1035 return false;
1036 }
1037
1038 /* Try to examine chain layout according to IEEE 1149.1 §12
1039 * This is called a "blind interrogation" of the scan chain.
1040 */
1041 static int jtag_examine_chain(void)
1042 {
1043 int retval;
1044 unsigned max_taps = jtag_tap_count();
1045
1046 /* Autoprobe up to this many. */
1047 if (max_taps < JTAG_MAX_AUTO_TAPS)
1048 max_taps = JTAG_MAX_AUTO_TAPS;
1049
1050 /* Add room for end-of-chain marker. */
1051 max_taps++;
1052
1053 uint8_t *idcode_buffer = malloc(max_taps * 4);
1054 if (idcode_buffer == NULL)
1055 return ERROR_JTAG_INIT_FAILED;
1056
1057 /* DR scan to collect BYPASS or IDCODE register contents.
1058 * Then make sure the scan data has both ones and zeroes.
1059 */
1060 LOG_DEBUG("DR scan interrogation for IDCODE/BYPASS");
1061 retval = jtag_examine_chain_execute(idcode_buffer, max_taps);
1062 if (retval != ERROR_OK)
1063 goto out;
1064 if (!jtag_examine_chain_check(idcode_buffer, max_taps)) {
1065 retval = ERROR_JTAG_INIT_FAILED;
1066 goto out;
1067 }
1068
1069 /* Point at the 1st predefined tap, if any */
1070 struct jtag_tap *tap = jtag_tap_next_enabled(NULL);
1071
1072 unsigned bit_count = 0;
1073 unsigned autocount = 0;
1074 for (unsigned i = 0; i < max_taps; i++) {
1075 assert(bit_count < max_taps * 32);
1076 uint32_t idcode = buf_get_u32(idcode_buffer, bit_count, 32);
1077
1078 /* No predefined TAP? Auto-probe. */
1079 if (tap == NULL) {
1080 /* Is there another TAP? */
1081 if (jtag_idcode_is_final(idcode))
1082 break;
1083
1084 /* Default everything in this TAP except IR length.
1085 *
1086 * REVISIT create a jtag_alloc(chip, tap) routine, and
1087 * share it with jim_newtap_cmd().
1088 */
1089 tap = calloc(1, sizeof *tap);
1090 if (!tap) {
1091 retval = ERROR_FAIL;
1092 goto out;
1093 }
1094
1095 tap->chip = alloc_printf("auto%u", autocount++);
1096 tap->tapname = strdup("tap");
1097 tap->dotted_name = alloc_printf("%s.%s", tap->chip, tap->tapname);
1098
1099 tap->ir_length = 0; /* ... signifying irlen autoprobe */
1100 tap->ir_capture_mask = 0x03;
1101 tap->ir_capture_value = 0x01;
1102
1103 tap->enabled = true;
1104
1105 jtag_tap_init(tap);
1106 }
1107
1108 if ((idcode & 1) == 0) {
1109 /* Zero for LSB indicates a device in bypass */
1110 LOG_INFO("TAP %s does not have IDCODE", tap->dotted_name);
1111 tap->hasidcode = false;
1112 tap->idcode = 0;
1113
1114 bit_count += 1;
1115 } else {
1116 /* Friendly devices support IDCODE */
1117 tap->hasidcode = true;
1118 tap->idcode = idcode;
1119 jtag_examine_chain_display(LOG_LVL_INFO, "tap/device found", tap->dotted_name, idcode);
1120
1121 bit_count += 32;
1122 }
1123
1124 /* ensure the TAP ID matches what was expected */
1125 if (!jtag_examine_chain_match_tap(tap))
1126 retval = ERROR_JTAG_INIT_SOFT_FAIL;
1127
1128 tap = jtag_tap_next_enabled(tap);
1129 }
1130
1131 /* After those IDCODE or BYPASS register values should be
1132 * only the data we fed into the scan chain.
1133 */
1134 if (jtag_examine_chain_end(idcode_buffer, bit_count, max_taps * 32)) {
1135 LOG_ERROR("double-check your JTAG setup (interface, speed, ...)");
1136 retval = ERROR_JTAG_INIT_FAILED;
1137 goto out;
1138 }
1139
1140 /* Return success or, for backwards compatibility if only
1141 * some IDCODE values mismatched, a soft/continuable fault.
1142 */
1143 out:
1144 free(idcode_buffer);
1145 return retval;
1146 }
1147
1148 /*
1149 * Validate the date loaded by entry to the Capture-IR state, to help
1150 * find errors related to scan chain configuration (wrong IR lengths)
1151 * or communication.
1152 *
1153 * Entry state can be anything. On non-error exit, all TAPs are in
1154 * bypass mode. On error exits, the scan chain is reset.
1155 */
1156 static int jtag_validate_ircapture(void)
1157 {
1158 struct jtag_tap *tap;
1159 int total_ir_length = 0;
1160 uint8_t *ir_test = NULL;
1161 struct scan_field field;
1162 uint64_t val;
1163 int chain_pos = 0;
1164 int retval;
1165
1166 /* when autoprobing, accomodate huge IR lengths */
1167 for (tap = NULL, total_ir_length = 0;
1168 (tap = jtag_tap_next_enabled(tap)) != NULL;
1169 total_ir_length += tap->ir_length) {
1170 if (tap->ir_length == 0)
1171 total_ir_length += JTAG_IRLEN_MAX;
1172 }
1173
1174 /* increase length to add 2 bit sentinel after scan */
1175 total_ir_length += 2;
1176
1177 ir_test = malloc(DIV_ROUND_UP(total_ir_length, 8));
1178 if (ir_test == NULL)
1179 return ERROR_FAIL;
1180
1181 /* after this scan, all TAPs will capture BYPASS instructions */
1182 buf_set_ones(ir_test, total_ir_length);
1183
1184 field.num_bits = total_ir_length;
1185 field.out_value = ir_test;
1186 field.in_value = ir_test;
1187
1188 jtag_add_plain_ir_scan(field.num_bits, field.out_value, field.in_value, TAP_IDLE);
1189
1190 LOG_DEBUG("IR capture validation scan");
1191 retval = jtag_execute_queue();
1192 if (retval != ERROR_OK)
1193 goto done;
1194
1195 tap = NULL;
1196 chain_pos = 0;
1197
1198 for (;; ) {
1199 tap = jtag_tap_next_enabled(tap);
1200 if (tap == NULL)
1201 break;
1202
1203 /* If we're autoprobing, guess IR lengths. They must be at
1204 * least two bits. Guessing will fail if (a) any TAP does
1205 * not conform to the JTAG spec; or (b) when the upper bits
1206 * captured from some conforming TAP are nonzero. Or if
1207 * (c) an IR length is longer than JTAG_IRLEN_MAX bits,
1208 * an implementation limit, which could someday be raised.
1209 *
1210 * REVISIT optimization: if there's a *single* TAP we can
1211 * lift restrictions (a) and (b) by scanning a recognizable
1212 * pattern before the all-ones BYPASS. Check for where the
1213 * pattern starts in the result, instead of an 0...01 value.
1214 *
1215 * REVISIT alternative approach: escape to some tcl code
1216 * which could provide more knowledge, based on IDCODE; and
1217 * only guess when that has no success.
1218 */
1219 if (tap->ir_length == 0) {
1220 tap->ir_length = 2;
1221 while ((val = buf_get_u64(ir_test, chain_pos, tap->ir_length + 1)) == 1
1222 && tap->ir_length < JTAG_IRLEN_MAX) {
1223 tap->ir_length++;
1224 }
1225 LOG_WARNING("AUTO %s - use \"jtag newtap " "%s %s -irlen %d "
1226 "-expected-id 0x%08" PRIx32 "\"",
1227 tap->dotted_name, tap->chip, tap->tapname, tap->ir_length, tap->idcode);
1228 }
1229
1230 /* Validate the two LSBs, which must be 01 per JTAG spec.
1231 *
1232 * Or ... more bits could be provided by TAP declaration.
1233 * Plus, some taps (notably in i.MX series chips) violate
1234 * this part of the JTAG spec, so their capture mask/value
1235 * attributes might disable this test.
1236 */
1237 val = buf_get_u64(ir_test, chain_pos, tap->ir_length);
1238 if ((val & tap->ir_capture_mask) != tap->ir_capture_value) {
1239 LOG_ERROR("%s: IR capture error; saw 0x%0*" PRIx64 " not 0x%0*" PRIx32,
1240 jtag_tap_name(tap),
1241 (tap->ir_length + 7) / tap->ir_length, val,
1242 (tap->ir_length + 7) / tap->ir_length, tap->ir_capture_value);
1243
1244 retval = ERROR_JTAG_INIT_FAILED;
1245 goto done;
1246 }
1247 LOG_DEBUG("%s: IR capture 0x%0*" PRIx64, jtag_tap_name(tap),
1248 (tap->ir_length + 7) / tap->ir_length, val);
1249 chain_pos += tap->ir_length;
1250 }
1251
1252 /* verify the '11' sentinel we wrote is returned at the end */
1253 val = buf_get_u64(ir_test, chain_pos, 2);
1254 if (val != 0x3) {
1255 char *cbuf = buf_to_str(ir_test, total_ir_length, 16);
1256
1257 LOG_ERROR("IR capture error at bit %d, saw 0x%s not 0x...3",
1258 chain_pos, cbuf);
1259 free(cbuf);
1260 retval = ERROR_JTAG_INIT_FAILED;
1261 }
1262
1263 done:
1264 free(ir_test);
1265 if (retval != ERROR_OK) {
1266 jtag_add_tlr();
1267 jtag_execute_queue();
1268 }
1269 return retval;
1270 }
1271
1272 void jtag_tap_init(struct jtag_tap *tap)
1273 {
1274 unsigned ir_len_bits;
1275 unsigned ir_len_bytes;
1276
1277 /* if we're autoprobing, cope with potentially huge ir_length */
1278 ir_len_bits = tap->ir_length ? : JTAG_IRLEN_MAX;
1279 ir_len_bytes = DIV_ROUND_UP(ir_len_bits, 8);
1280
1281 tap->expected = calloc(1, ir_len_bytes);
1282 tap->expected_mask = calloc(1, ir_len_bytes);
1283 tap->cur_instr = malloc(ir_len_bytes);
1284
1285 /** @todo cope better with ir_length bigger than 32 bits */
1286 if (ir_len_bits > 32)
1287 ir_len_bits = 32;
1288
1289 buf_set_u32(tap->expected, 0, ir_len_bits, tap->ir_capture_value);
1290 buf_set_u32(tap->expected_mask, 0, ir_len_bits, tap->ir_capture_mask);
1291
1292 /* TAP will be in bypass mode after jtag_validate_ircapture() */
1293 tap->bypass = 1;
1294 buf_set_ones(tap->cur_instr, tap->ir_length);
1295
1296 /* register the reset callback for the TAP */
1297 jtag_register_event_callback(&jtag_reset_callback, tap);
1298 jtag_tap_add(tap);
1299
1300 LOG_DEBUG("Created Tap: %s @ abs position %d, "
1301 "irlen %d, capture: 0x%x mask: 0x%x", tap->dotted_name,
1302 tap->abs_chain_position, tap->ir_length,
1303 (unsigned) tap->ir_capture_value,
1304 (unsigned) tap->ir_capture_mask);
1305 }
1306
1307 void jtag_tap_free(struct jtag_tap *tap)
1308 {
1309 jtag_unregister_event_callback(&jtag_reset_callback, tap);
1310
1311 free(tap->expected);
1312 free(tap->expected_mask);
1313 free(tap->expected_ids);
1314 free(tap->cur_instr);
1315 free(tap->chip);
1316 free(tap->tapname);
1317 free(tap->dotted_name);
1318 free(tap->dap);
1319 free(tap);
1320 }
1321
1322 /**
1323 * Do low-level setup like initializing registers, output signals,
1324 * and clocking.
1325 */
1326 int adapter_init(struct command_context *cmd_ctx)
1327 {
1328 if (jtag)
1329 return ERROR_OK;
1330
1331 if (!jtag_interface) {
1332 /* nothing was previously specified by "interface" command */
1333 LOG_ERROR("Debug Adapter has to be specified, "
1334 "see \"interface\" command");
1335 return ERROR_JTAG_INVALID_INTERFACE;
1336 }
1337
1338 int retval;
1339 retval = jtag_interface->init();
1340 if (retval != ERROR_OK)
1341 return retval;
1342 jtag = jtag_interface;
1343
1344 /* LEGACY SUPPORT ... adapter drivers must declare what
1345 * transports they allow. Until they all do so, assume
1346 * the legacy drivers are JTAG-only
1347 */
1348 if (!transports_are_declared()) {
1349 LOG_ERROR("Adapter driver '%s' did not declare "
1350 "which transports it allows; assuming "
1351 "JTAG-only", jtag->name);
1352 retval = allow_transports(cmd_ctx, jtag_only);
1353 if (retval != ERROR_OK)
1354 return retval;
1355 }
1356
1357 if (jtag->speed == NULL) {
1358 LOG_INFO("This adapter doesn't support configurable speed");
1359 return ERROR_OK;
1360 }
1361
1362 if (CLOCK_MODE_UNSELECTED == clock_mode) {
1363 LOG_ERROR("An adapter speed is not selected in the init script."
1364 " Insert a call to adapter_khz or jtag_rclk to proceed.");
1365 return ERROR_JTAG_INIT_FAILED;
1366 }
1367
1368 int requested_khz = jtag_get_speed_khz();
1369 int actual_khz = requested_khz;
1370 int jtag_speed_var = 0;
1371 retval = jtag_get_speed(&jtag_speed_var);
1372 if (retval != ERROR_OK)
1373 return retval;
1374 retval = jtag->speed(jtag_speed_var);
1375 if (retval != ERROR_OK)
1376 return retval;
1377 retval = jtag_get_speed_readable(&actual_khz);
1378 if (ERROR_OK != retval)
1379 LOG_INFO("adapter-specific clock speed value %d", jtag_speed_var);
1380 else if (actual_khz) {
1381 /* Adaptive clocking -- JTAG-specific */
1382 if ((CLOCK_MODE_RCLK == clock_mode)
1383 || ((CLOCK_MODE_KHZ == clock_mode) && !requested_khz)) {
1384 LOG_INFO("RCLK (adaptive clock speed) not supported - fallback to %d kHz"
1385 , actual_khz);
1386 } else
1387 LOG_INFO("clock speed %d kHz", actual_khz);
1388 } else
1389 LOG_INFO("RCLK (adaptive clock speed)");
1390
1391 return ERROR_OK;
1392 }
1393
1394 int jtag_init_inner(struct command_context *cmd_ctx)
1395 {
1396 struct jtag_tap *tap;
1397 int retval;
1398 bool issue_setup = true;
1399
1400 LOG_DEBUG("Init JTAG chain");
1401
1402 tap = jtag_tap_next_enabled(NULL);
1403 if (tap == NULL) {
1404 /* Once JTAG itself is properly set up, and the scan chain
1405 * isn't absurdly large, IDCODE autoprobe should work fine.
1406 *
1407 * But ... IRLEN autoprobe can fail even on systems which
1408 * are fully conformant to JTAG. Also, JTAG setup can be
1409 * quite finicky on some systems.
1410 *
1411 * REVISIT: if TAP autoprobe works OK, then in many cases
1412 * we could escape to tcl code and set up targets based on
1413 * the TAP's IDCODE values.
1414 */
1415 LOG_WARNING("There are no enabled taps. "
1416 "AUTO PROBING MIGHT NOT WORK!!");
1417
1418 /* REVISIT default clock will often be too fast ... */
1419 }
1420
1421 jtag_add_tlr();
1422 retval = jtag_execute_queue();
1423 if (retval != ERROR_OK)
1424 return retval;
1425
1426 /* Examine DR values first. This discovers problems which will
1427 * prevent communication ... hardware issues like TDO stuck, or
1428 * configuring the wrong number of (enabled) TAPs.
1429 */
1430 retval = jtag_examine_chain();
1431 switch (retval) {
1432 case ERROR_OK:
1433 /* complete success */
1434 break;
1435 default:
1436 /* For backward compatibility reasons, try coping with
1437 * configuration errors involving only ID mismatches.
1438 * We might be able to talk to the devices.
1439 *
1440 * Also the device might be powered down during startup.
1441 *
1442 * After OpenOCD starts, we can try to power on the device
1443 * and run a reset.
1444 */
1445 LOG_ERROR("Trying to use configured scan chain anyway...");
1446 issue_setup = false;
1447 break;
1448 }
1449
1450 /* Now look at IR values. Problems here will prevent real
1451 * communication. They mostly mean that the IR length is
1452 * wrong ... or that the IR capture value is wrong. (The
1453 * latter is uncommon, but easily worked around: provide
1454 * ircapture/irmask values during TAP setup.)
1455 */
1456 retval = jtag_validate_ircapture();
1457 if (retval != ERROR_OK) {
1458 /* The target might be powered down. The user
1459 * can power it up and reset it after firing
1460 * up OpenOCD.
1461 */
1462 issue_setup = false;
1463 }
1464
1465 if (issue_setup)
1466 jtag_notify_event(JTAG_TAP_EVENT_SETUP);
1467 else
1468 LOG_WARNING("Bypassing JTAG setup events due to errors");
1469
1470
1471 return ERROR_OK;
1472 }
1473
1474 int adapter_quit(void)
1475 {
1476 if (jtag && jtag->quit) {
1477 /* close the JTAG interface */
1478 int result = jtag->quit();
1479 if (ERROR_OK != result)
1480 LOG_ERROR("failed: %d", result);
1481 }
1482
1483 struct jtag_tap *t = jtag_all_taps();
1484 while (t) {
1485 struct jtag_tap *n = t->next_tap;
1486 jtag_tap_free(t);
1487 t = n;
1488 }
1489
1490 return ERROR_OK;
1491 }
1492
1493 int swd_init_reset(struct command_context *cmd_ctx)
1494 {
1495 int retval = adapter_init(cmd_ctx);
1496 if (retval != ERROR_OK)
1497 return retval;
1498
1499 LOG_DEBUG("Initializing with hard SRST reset");
1500
1501 if (jtag_reset_config & RESET_HAS_SRST)
1502 swd_add_reset(1);
1503 swd_add_reset(0);
1504 retval = jtag_execute_queue();
1505 return retval;
1506 }
1507
1508 int jtag_init_reset(struct command_context *cmd_ctx)
1509 {
1510 int retval = adapter_init(cmd_ctx);
1511 if (retval != ERROR_OK)
1512 return retval;
1513
1514 LOG_DEBUG("Initializing with hard TRST+SRST reset");
1515
1516 /*
1517 * This procedure is used by default when OpenOCD triggers a reset.
1518 * It's now done through an overridable Tcl "init_reset" wrapper.
1519 *
1520 * This started out as a more powerful "get JTAG working" reset than
1521 * jtag_init_inner(), applying TRST because some chips won't activate
1522 * JTAG without a TRST cycle (presumed to be async, though some of
1523 * those chips synchronize JTAG activation using TCK).
1524 *
1525 * But some chips only activate JTAG as part of an SRST cycle; SRST
1526 * got mixed in. So it became a hard reset routine, which got used
1527 * in more places, and which coped with JTAG reset being forced as
1528 * part of SRST (srst_pulls_trst).
1529 *
1530 * And even more corner cases started to surface: TRST and/or SRST
1531 * assertion timings matter; some chips need other JTAG operations;
1532 * TRST/SRST sequences can need to be different from these, etc.
1533 *
1534 * Systems should override that wrapper to support system-specific
1535 * requirements that this not-fully-generic code doesn't handle.
1536 *
1537 * REVISIT once Tcl code can read the reset_config modes, this won't
1538 * need to be a C routine at all...
1539 */
1540 if (jtag_reset_config & RESET_HAS_SRST) {
1541 jtag_add_reset(1, 1);
1542 if ((jtag_reset_config & RESET_SRST_PULLS_TRST) == 0)
1543 jtag_add_reset(0, 1);
1544 } else {
1545 jtag_add_reset(1, 0); /* TAP_RESET, using TMS+TCK or TRST */
1546 }
1547
1548 /* some targets enable us to connect with srst asserted */
1549 if (jtag_reset_config & RESET_CNCT_UNDER_SRST) {
1550 if (jtag_reset_config & RESET_SRST_NO_GATING)
1551 jtag_add_reset(0, 1);
1552 else {
1553 LOG_WARNING("\'srst_nogate\' reset_config option is required");
1554 jtag_add_reset(0, 0);
1555 }
1556 } else
1557 jtag_add_reset(0, 0);
1558 retval = jtag_execute_queue();
1559 if (retval != ERROR_OK)
1560 return retval;
1561
1562 /* Check that we can communication on the JTAG chain + eventually we want to
1563 * be able to perform enumeration only after OpenOCD has started
1564 * telnet and GDB server
1565 *
1566 * That would allow users to more easily perform any magic they need to before
1567 * reset happens.
1568 */
1569 return jtag_init_inner(cmd_ctx);
1570 }
1571
1572 int jtag_init(struct command_context *cmd_ctx)
1573 {
1574 int retval = adapter_init(cmd_ctx);
1575 if (retval != ERROR_OK)
1576 return retval;
1577
1578 /* guard against oddball hardware: force resets to be inactive */
1579 jtag_add_reset(0, 0);
1580
1581 /* some targets enable us to connect with srst asserted */
1582 if (jtag_reset_config & RESET_CNCT_UNDER_SRST) {
1583 if (jtag_reset_config & RESET_SRST_NO_GATING)
1584 jtag_add_reset(0, 1);
1585 else
1586 LOG_WARNING("\'srst_nogate\' reset_config option is required");
1587 }
1588 retval = jtag_execute_queue();
1589 if (retval != ERROR_OK)
1590 return retval;
1591
1592 if (Jim_Eval_Named(cmd_ctx->interp, "jtag_init", __FILE__, __LINE__) != JIM_OK)
1593 return ERROR_FAIL;
1594
1595 return ERROR_OK;
1596 }
1597
1598 unsigned jtag_get_speed_khz(void)
1599 {
1600 return speed_khz;
1601 }
1602
1603 static int adapter_khz_to_speed(unsigned khz, int *speed)
1604 {
1605 LOG_DEBUG("convert khz to interface specific speed value");
1606 speed_khz = khz;
1607 if (jtag != NULL) {
1608 LOG_DEBUG("have interface set up");
1609 int speed_div1;
1610 int retval = jtag->khz(jtag_get_speed_khz(), &speed_div1);
1611 if (ERROR_OK != retval)
1612 return retval;
1613 *speed = speed_div1;
1614 }
1615 return ERROR_OK;
1616 }
1617
1618 static int jtag_rclk_to_speed(unsigned fallback_speed_khz, int *speed)
1619 {
1620 int retval = adapter_khz_to_speed(0, speed);
1621 if ((ERROR_OK != retval) && fallback_speed_khz) {
1622 LOG_DEBUG("trying fallback speed...");
1623 retval = adapter_khz_to_speed(fallback_speed_khz, speed);
1624 }
1625 return retval;
1626 }
1627
1628 static int jtag_set_speed(int speed)
1629 {
1630 jtag_speed = speed;
1631 /* this command can be called during CONFIG,
1632 * in which case jtag isn't initialized */
1633 return jtag ? jtag->speed(speed) : ERROR_OK;
1634 }
1635
1636 int jtag_config_khz(unsigned khz)
1637 {
1638 LOG_DEBUG("handle jtag khz");
1639 clock_mode = CLOCK_MODE_KHZ;
1640 int speed = 0;
1641 int retval = adapter_khz_to_speed(khz, &speed);
1642 return (ERROR_OK != retval) ? retval : jtag_set_speed(speed);
1643 }
1644
1645 int jtag_config_rclk(unsigned fallback_speed_khz)
1646 {
1647 LOG_DEBUG("handle jtag rclk");
1648 clock_mode = CLOCK_MODE_RCLK;
1649 rclk_fallback_speed_khz = fallback_speed_khz;
1650 int speed = 0;
1651 int retval = jtag_rclk_to_speed(fallback_speed_khz, &speed);
1652 return (ERROR_OK != retval) ? retval : jtag_set_speed(speed);
1653 }
1654
1655 int jtag_get_speed(int *speed)
1656 {
1657 switch (clock_mode) {
1658 case CLOCK_MODE_KHZ:
1659 adapter_khz_to_speed(jtag_get_speed_khz(), speed);
1660 break;
1661 case CLOCK_MODE_RCLK:
1662 jtag_rclk_to_speed(rclk_fallback_speed_khz, speed);
1663 break;
1664 default:
1665 LOG_ERROR("BUG: unknown jtag clock mode");
1666 return ERROR_FAIL;
1667 }
1668 return ERROR_OK;
1669 }
1670
1671 int jtag_get_speed_readable(int *khz)
1672 {
1673 int jtag_speed_var = 0;
1674 int retval = jtag_get_speed(&jtag_speed_var);
1675 if (retval != ERROR_OK)
1676 return retval;
1677 return jtag ? jtag->speed_div(jtag_speed_var, khz) : ERROR_OK;
1678 }
1679
1680 void jtag_set_verify(bool enable)
1681 {
1682 jtag_verify = enable;
1683 }
1684
1685 bool jtag_will_verify()
1686 {
1687 return jtag_verify;
1688 }
1689
1690 void jtag_set_verify_capture_ir(bool enable)
1691 {
1692 jtag_verify_capture_ir = enable;
1693 }
1694
1695 bool jtag_will_verify_capture_ir()
1696 {
1697 return jtag_verify_capture_ir;
1698 }
1699
1700 int jtag_power_dropout(int *dropout)
1701 {
1702 if (jtag == NULL) {
1703 /* TODO: as the jtag interface is not valid all
1704 * we can do at the moment is exit OpenOCD */
1705 LOG_ERROR("No Valid JTAG Interface Configured.");
1706 exit(-1);
1707 }
1708 return jtag->power_dropout(dropout);
1709 }
1710
1711 int jtag_srst_asserted(int *srst_asserted)
1712 {
1713 return jtag->srst_asserted(srst_asserted);
1714 }
1715
1716 enum reset_types jtag_get_reset_config(void)
1717 {
1718 return jtag_reset_config;
1719 }
1720 void jtag_set_reset_config(enum reset_types type)
1721 {
1722 jtag_reset_config = type;
1723 }
1724
1725 int jtag_get_trst(void)
1726 {
1727 return jtag_trst == 1;
1728 }
1729 int jtag_get_srst(void)
1730 {
1731 return jtag_srst == 1;
1732 }
1733
1734 void jtag_set_nsrst_delay(unsigned delay)
1735 {
1736 adapter_nsrst_delay = delay;
1737 }
1738 unsigned jtag_get_nsrst_delay(void)
1739 {
1740 return adapter_nsrst_delay;
1741 }
1742 void jtag_set_ntrst_delay(unsigned delay)
1743 {
1744 jtag_ntrst_delay = delay;
1745 }
1746 unsigned jtag_get_ntrst_delay(void)
1747 {
1748 return jtag_ntrst_delay;
1749 }
1750
1751
1752 void jtag_set_nsrst_assert_width(unsigned delay)
1753 {
1754 adapter_nsrst_assert_width = delay;
1755 }
1756 unsigned jtag_get_nsrst_assert_width(void)
1757 {
1758 return adapter_nsrst_assert_width;
1759 }
1760 void jtag_set_ntrst_assert_width(unsigned delay)
1761 {
1762 jtag_ntrst_assert_width = delay;
1763 }
1764 unsigned jtag_get_ntrst_assert_width(void)
1765 {
1766 return jtag_ntrst_assert_width;
1767 }
1768
1769 static int jtag_select(struct command_context *ctx)
1770 {
1771 int retval;
1772
1773 /* NOTE: interface init must already have been done.
1774 * That works with only C code ... no Tcl glue required.
1775 */
1776
1777 retval = jtag_register_commands(ctx);
1778
1779 if (retval != ERROR_OK)
1780 return retval;
1781
1782 retval = svf_register_commands(ctx);
1783
1784 if (retval != ERROR_OK)
1785 return retval;
1786
1787 return xsvf_register_commands(ctx);
1788 }
1789
1790 static struct transport jtag_transport = {
1791 .name = "jtag",
1792 .select = jtag_select,
1793 .init = jtag_init,
1794 };
1795
1796 static void jtag_constructor(void) __attribute__((constructor));
1797 static void jtag_constructor(void)
1798 {
1799 transport_register(&jtag_transport);
1800 }
1801
1802 /** Returns true if the current debug session
1803 * is using JTAG as its transport.
1804 */
1805 bool transport_is_jtag(void)
1806 {
1807 return get_current_transport() == &jtag_transport;
1808 }
1809
1810 void adapter_assert_reset(void)
1811 {
1812 if (transport_is_jtag()) {
1813 if (jtag_reset_config & RESET_SRST_PULLS_TRST)
1814 jtag_add_reset(1, 1);
1815 else
1816 jtag_add_reset(0, 1);
1817 } else if (transport_is_swd())
1818 swd_add_reset(1);
1819 else if (get_current_transport() != NULL)
1820 LOG_ERROR("reset is not supported on %s",
1821 get_current_transport()->name);
1822 else
1823 LOG_ERROR("transport is not selected");
1824 }
1825
1826 void adapter_deassert_reset(void)
1827 {
1828 if (transport_is_jtag())
1829 jtag_add_reset(0, 0);
1830 else if (transport_is_swd())
1831 swd_add_reset(0);
1832 else if (get_current_transport() != NULL)
1833 LOG_ERROR("reset is not supported on %s",
1834 get_current_transport()->name);
1835 else
1836 LOG_ERROR("transport is not selected");
1837 }
1838
1839 int adapter_config_trace(bool enabled, enum tpio_pin_protocol pin_protocol,
1840 uint32_t port_size, unsigned int *trace_freq)
1841 {
1842 if (jtag->config_trace)
1843 return jtag->config_trace(enabled, pin_protocol, port_size,
1844 trace_freq);
1845 else if (enabled) {
1846 LOG_ERROR("The selected interface does not support tracing");
1847 return ERROR_FAIL;
1848 }
1849
1850 return ERROR_OK;
1851 }
1852
1853 int adapter_poll_trace(uint8_t *buf, size_t *size)
1854 {
1855 if (jtag->poll_trace)
1856 return jtag->poll_trace(buf, size);
1857
1858 return ERROR_FAIL;
1859 }