1 /***************************************************************************
2 * Copyright (C) 2009 Zachary T Welch *
3 * zw@superlucidity.net *
5 * Copyright (C) 2007,2008,2009 Øyvind Harboe *
6 * oyvind.harboe@zylin.com *
8 * Copyright (C) 2009 SoftPLC Corporation *
12 * Copyright (C) 2005 by Dominic Rath *
13 * Dominic.Rath@gmx.de *
15 * This program is free software; you can redistribute it and/or modify *
16 * it under the terms of the GNU General Public License as published by *
17 * the Free Software Foundation; either version 2 of the License, or *
18 * (at your option) any later version. *
20 * This program is distributed in the hope that it will be useful, *
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
23 * GNU General Public License for more details. *
25 * You should have received a copy of the GNU General Public License *
26 * along with this program; if not, write to the *
27 * Free Software Foundation, Inc., *
28 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
29 ***************************************************************************/
35 #include "interface.h"
42 /// The number of JTAG queue flushes (for profiling and debugging purposes).
43 static int jtag_flush_queue_count
;
45 static void jtag_add_scan_check(struct jtag_tap
*active
,
46 void (*jtag_add_scan
)(struct jtag_tap
*active
, int in_num_fields
, const struct scan_field
*in_fields
, tap_state_t state
),
47 int in_num_fields
, struct scan_field
*in_fields
, tap_state_t state
);
50 * The jtag_error variable is set when an error occurs while executing
51 * the queue. Application code may set this using jtag_set_error(),
52 * when an error occurs during processing that should be reported during
53 * jtag_execute_queue().
55 * Tts value may be checked with jtag_get_error() and cleared with
56 * jtag_error_clear(). This value is returned (and cleared) by
57 * jtag_execute_queue().
59 static int jtag_error
= ERROR_OK
;
61 static const char *jtag_event_strings
[] =
63 [JTAG_TRST_ASSERTED
] = "TAP reset",
64 [JTAG_TAP_EVENT_SETUP
] = "TAP setup",
65 [JTAG_TAP_EVENT_ENABLE
] = "TAP enabled",
66 [JTAG_TAP_EVENT_DISABLE
] = "TAP disabled",
70 * JTAG adapters must initialize with TRST and SRST de-asserted
71 * (they're negative logic, so that means *high*). But some
72 * hardware doesn't necessarily work that way ... so set things
73 * up so that jtag_init() always forces that state.
75 static int jtag_trst
= -1;
76 static int jtag_srst
= -1;
79 * List all TAPs that have been created.
81 static struct jtag_tap
*__jtag_all_taps
= NULL
;
83 * The number of TAPs in the __jtag_all_taps list, used to track the
84 * assigned chain position to new TAPs
86 static unsigned jtag_num_taps
= 0;
88 static enum reset_types jtag_reset_config
= RESET_NONE
;
89 static tap_state_t cmd_queue_end_state
= TAP_RESET
;
90 tap_state_t cmd_queue_cur_state
= TAP_RESET
;
92 static bool jtag_verify_capture_ir
= true;
93 static int jtag_verify
= 1;
95 /* how long the OpenOCD should wait before attempting JTAG communication after reset lines deasserted (in ms) */
96 static int adapter_nsrst_delay
= 0; /* default to no nSRST delay */
97 static int jtag_ntrst_delay
= 0; /* default to no nTRST delay */
98 static int adapter_nsrst_assert_width
= 0; /* width of assertion */
99 static int jtag_ntrst_assert_width
= 0; /* width of assertion */
102 * Contains a single callback along with a pointer that will be passed
103 * when an event occurs.
105 struct jtag_event_callback
{
107 jtag_event_handler_t callback
;
108 /// the private data to pass to the callback
110 /// the next callback
111 struct jtag_event_callback
* next
;
114 /* callbacks to inform high-level handlers about JTAG state changes */
115 static struct jtag_event_callback
*jtag_event_callbacks
;
118 static int speed_khz
= 0;
119 /* speed to fallback to when RCLK is requested but not supported */
120 static int rclk_fallback_speed_khz
= 0;
121 static enum {CLOCK_MODE_SPEED
, CLOCK_MODE_KHZ
, CLOCK_MODE_RCLK
} clock_mode
;
122 static int jtag_speed
= 0;
124 static struct jtag_interface
*jtag
= NULL
;
127 struct jtag_interface
*jtag_interface
= NULL
;
129 void jtag_set_error(int error
)
131 if ((error
== ERROR_OK
) || (jtag_error
!= ERROR_OK
))
135 int jtag_get_error(void)
139 int jtag_error_clear(void)
141 int temp
= jtag_error
;
142 jtag_error
= ERROR_OK
;
148 static bool jtag_poll
= 1;
150 bool is_jtag_poll_safe(void)
152 /* Polling can be disabled explicitly with set_enabled(false).
153 * It is also implicitly disabled while TRST is active and
154 * while SRST is gating the JTAG clock.
156 if (!jtag_poll
|| jtag_trst
!= 0)
158 return jtag_srst
== 0 || (jtag_reset_config
& RESET_SRST_NO_GATING
);
161 bool jtag_poll_get_enabled(void)
166 void jtag_poll_set_enabled(bool value
)
173 struct jtag_tap
*jtag_all_taps(void)
175 return __jtag_all_taps
;
178 unsigned jtag_tap_count(void)
180 return jtag_num_taps
;
183 unsigned jtag_tap_count_enabled(void)
185 struct jtag_tap
*t
= jtag_all_taps();
196 /// Append a new TAP to the chain of all taps.
197 void jtag_tap_add(struct jtag_tap
*t
)
199 t
->abs_chain_position
= jtag_num_taps
++;
201 struct jtag_tap
**tap
= &__jtag_all_taps
;
203 tap
= &(*tap
)->next_tap
;
207 /* returns a pointer to the n-th device in the scan chain */
208 static inline struct jtag_tap
*jtag_tap_by_position(unsigned n
)
210 struct jtag_tap
*t
= jtag_all_taps();
218 struct jtag_tap
*jtag_tap_by_string(const char *s
)
220 /* try by name first */
221 struct jtag_tap
*t
= jtag_all_taps();
225 if (0 == strcmp(t
->dotted_name
, s
))
230 /* no tap found by name, so try to parse the name as a number */
232 if (parse_uint(s
, &n
) != ERROR_OK
)
235 /* FIXME remove this numeric fallback code late June 2010, along
236 * with all info in the User's Guide that TAPs have numeric IDs.
237 * Also update "scan_chain" output to not display the numbers.
239 t
= jtag_tap_by_position(n
);
241 LOG_WARNING("Specify TAP '%s' by name, not number %u",
247 struct jtag_tap
* jtag_tap_next_enabled(struct jtag_tap
* p
)
249 p
= p
? p
->next_tap
: jtag_all_taps();
259 const char *jtag_tap_name(const struct jtag_tap
*tap
)
261 return (tap
== NULL
) ? "(unknown)" : tap
->dotted_name
;
265 int jtag_register_event_callback(jtag_event_handler_t callback
, void *priv
)
267 struct jtag_event_callback
**callbacks_p
= &jtag_event_callbacks
;
269 if (callback
== NULL
)
271 return ERROR_INVALID_ARGUMENTS
;
276 while ((*callbacks_p
)->next
)
277 callbacks_p
= &((*callbacks_p
)->next
);
278 callbacks_p
= &((*callbacks_p
)->next
);
281 (*callbacks_p
) = malloc(sizeof(struct jtag_event_callback
));
282 (*callbacks_p
)->callback
= callback
;
283 (*callbacks_p
)->priv
= priv
;
284 (*callbacks_p
)->next
= NULL
;
289 int jtag_unregister_event_callback(jtag_event_handler_t callback
, void *priv
)
291 struct jtag_event_callback
**callbacks_p
;
292 struct jtag_event_callback
**next
;
294 if (callback
== NULL
)
296 return ERROR_INVALID_ARGUMENTS
;
299 for (callbacks_p
= &jtag_event_callbacks
;
300 *callbacks_p
!= NULL
;
303 next
= &((*callbacks_p
)->next
);
305 if ((*callbacks_p
)->priv
!= priv
)
308 if ((*callbacks_p
)->callback
== callback
)
311 *callbacks_p
= *next
;
318 int jtag_call_event_callbacks(enum jtag_event event
)
320 struct jtag_event_callback
*callback
= jtag_event_callbacks
;
322 LOG_DEBUG("jtag event: %s", jtag_event_strings
[event
]);
326 struct jtag_event_callback
*next
;
328 /* callback may remove itself */
329 next
= callback
->next
;
330 callback
->callback(event
, callback
->priv
);
337 static void jtag_checks(void)
339 assert(jtag_trst
== 0);
342 static void jtag_prelude(tap_state_t state
)
346 assert(state
!= TAP_INVALID
);
348 cmd_queue_cur_state
= state
;
351 void jtag_alloc_in_value32(struct scan_field
*field
)
353 interface_jtag_alloc_in_value32(field
);
356 void jtag_add_ir_scan_noverify(struct jtag_tap
*active
, const struct scan_field
*in_fields
,
361 int retval
= interface_jtag_add_ir_scan(active
, in_fields
, state
);
362 jtag_set_error(retval
);
365 static void jtag_add_ir_scan_noverify_callback(struct jtag_tap
*active
, int dummy
, const struct scan_field
*in_fields
,
368 jtag_add_ir_scan_noverify(active
, in_fields
, state
);
371 void jtag_add_ir_scan(struct jtag_tap
*active
, struct scan_field
*in_fields
, tap_state_t state
)
373 assert(state
!= TAP_RESET
);
375 if (jtag_verify
&& jtag_verify_capture_ir
)
377 /* 8 x 32 bit id's is enough for all invocations */
379 /* if we are to run a verification of the ir scan, we need to get the input back.
380 * We may have to allocate space if the caller didn't ask for the input back.
382 in_fields
->check_value
= active
->expected
;
383 in_fields
->check_mask
= active
->expected_mask
;
384 jtag_add_scan_check(active
, jtag_add_ir_scan_noverify_callback
, 1, in_fields
, state
);
387 jtag_add_ir_scan_noverify(active
, in_fields
, state
);
391 void jtag_add_plain_ir_scan(int num_bits
, const uint8_t *out_bits
, uint8_t *in_bits
,
394 assert(out_bits
!= NULL
);
395 assert(state
!= TAP_RESET
);
399 int retval
= interface_jtag_add_plain_ir_scan(
400 num_bits
, out_bits
, in_bits
, state
);
401 jtag_set_error(retval
);
404 static int jtag_check_value_inner(uint8_t *captured
, uint8_t *in_check_value
,
405 uint8_t *in_check_mask
, int num_bits
);
407 static int jtag_check_value_mask_callback(jtag_callback_data_t data0
, jtag_callback_data_t data1
, jtag_callback_data_t data2
, jtag_callback_data_t data3
)
409 return jtag_check_value_inner((uint8_t *)data0
, (uint8_t *)data1
, (uint8_t *)data2
, (int)data3
);
412 static void jtag_add_scan_check(struct jtag_tap
*active
, void (*jtag_add_scan
)(struct jtag_tap
*active
, int in_num_fields
, const struct scan_field
*in_fields
, tap_state_t state
),
413 int in_num_fields
, struct scan_field
*in_fields
, tap_state_t state
)
415 for (int i
= 0; i
< in_num_fields
; i
++)
417 struct scan_field
*field
= &in_fields
[i
];
418 field
->allocated
= 0;
420 if (field
->check_value
|| field
->in_value
)
422 interface_jtag_add_scan_check_alloc(field
);
426 jtag_add_scan(active
, in_num_fields
, in_fields
, state
);
428 for (int i
= 0; i
< in_num_fields
; i
++)
430 if ((in_fields
[i
].check_value
!= NULL
) && (in_fields
[i
].in_value
!= NULL
))
432 /* this is synchronous for a minidriver */
433 jtag_add_callback4(jtag_check_value_mask_callback
, (jtag_callback_data_t
)in_fields
[i
].in_value
,
434 (jtag_callback_data_t
)in_fields
[i
].check_value
,
435 (jtag_callback_data_t
)in_fields
[i
].check_mask
,
436 (jtag_callback_data_t
)in_fields
[i
].num_bits
);
438 if (in_fields
[i
].allocated
)
440 free(in_fields
[i
].in_value
);
442 if (in_fields
[i
].modified
)
444 in_fields
[i
].in_value
= NULL
;
449 void jtag_add_dr_scan_check(struct jtag_tap
*active
, int in_num_fields
, struct scan_field
*in_fields
, tap_state_t state
)
453 jtag_add_scan_check(active
, jtag_add_dr_scan
, in_num_fields
, in_fields
, state
);
456 jtag_add_dr_scan(active
, in_num_fields
, in_fields
, state
);
461 void jtag_add_dr_scan(struct jtag_tap
*active
, int in_num_fields
, const struct scan_field
*in_fields
,
464 assert(state
!= TAP_RESET
);
469 retval
= interface_jtag_add_dr_scan(active
, in_num_fields
, in_fields
, state
);
470 jtag_set_error(retval
);
473 void jtag_add_plain_dr_scan(int num_bits
, const uint8_t *out_bits
, uint8_t *in_bits
,
476 assert(out_bits
!= NULL
);
477 assert(state
!= TAP_RESET
);
482 retval
= interface_jtag_add_plain_dr_scan(num_bits
, out_bits
, in_bits
, state
);
483 jtag_set_error(retval
);
486 void jtag_add_tlr(void)
488 jtag_prelude(TAP_RESET
);
489 jtag_set_error(interface_jtag_add_tlr());
491 /* NOTE: order here matches TRST path in jtag_add_reset() */
492 jtag_call_event_callbacks(JTAG_TRST_ASSERTED
);
493 jtag_notify_event(JTAG_TRST_ASSERTED
);
497 * If supported by the underlying adapter, this clocks a raw bit sequence
498 * onto TMS for switching betwen JTAG and SWD modes.
500 * DO NOT use this to bypass the integrity checks and logging provided
501 * by the jtag_add_pathmove() and jtag_add_statemove() calls.
503 * @param nbits How many bits to clock out.
504 * @param seq The bit sequence. The LSB is bit 0 of seq[0].
505 * @param state The JTAG tap state to record on completion. Use
506 * TAP_INVALID to represent being in in SWD mode.
508 * @todo Update naming conventions to stop assuming everything is JTAG.
510 int jtag_add_tms_seq(unsigned nbits
, const uint8_t *seq
, enum tap_state state
)
514 if (!(jtag
->supported
& DEBUG_CAP_TMS_SEQ
))
515 return ERROR_JTAG_NOT_IMPLEMENTED
;
518 cmd_queue_cur_state
= state
;
520 retval
= interface_add_tms_seq(nbits
, seq
, state
);
521 jtag_set_error(retval
);
525 void jtag_add_pathmove(int num_states
, const tap_state_t
*path
)
527 tap_state_t cur_state
= cmd_queue_cur_state
;
529 /* the last state has to be a stable state */
530 if (!tap_is_state_stable(path
[num_states
- 1]))
532 LOG_ERROR("BUG: TAP path doesn't finish in a stable state");
533 jtag_set_error(ERROR_JTAG_NOT_STABLE_STATE
);
537 for (int i
= 0; i
< num_states
; i
++)
539 if (path
[i
] == TAP_RESET
)
541 LOG_ERROR("BUG: TAP_RESET is not a valid state for pathmove sequences");
542 jtag_set_error(ERROR_JTAG_STATE_INVALID
);
546 if (tap_state_transition(cur_state
, true) != path
[i
]
547 && tap_state_transition(cur_state
, false) != path
[i
])
549 LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition",
550 tap_state_name(cur_state
), tap_state_name(path
[i
]));
551 jtag_set_error(ERROR_JTAG_TRANSITION_INVALID
);
559 jtag_set_error(interface_jtag_add_pathmove(num_states
, path
));
560 cmd_queue_cur_state
= path
[num_states
- 1];
563 int jtag_add_statemove(tap_state_t goal_state
)
565 tap_state_t cur_state
= cmd_queue_cur_state
;
567 if (goal_state
!= cur_state
)
569 LOG_DEBUG("cur_state=%s goal_state=%s",
570 tap_state_name(cur_state
),
571 tap_state_name(goal_state
));
574 /* If goal is RESET, be paranoid and force that that transition
575 * (e.g. five TCK cycles, TMS high). Else trust "cur_state".
577 if (goal_state
== TAP_RESET
)
579 else if (goal_state
== cur_state
)
580 /* nothing to do */ ;
582 else if (tap_is_state_stable(cur_state
) && tap_is_state_stable(goal_state
))
584 unsigned tms_bits
= tap_get_tms_path(cur_state
, goal_state
);
585 unsigned tms_count
= tap_get_tms_path_len(cur_state
, goal_state
);
586 tap_state_t moves
[8];
587 assert(tms_count
< ARRAY_SIZE(moves
));
589 for (unsigned i
= 0; i
< tms_count
; i
++, tms_bits
>>= 1)
591 bool bit
= tms_bits
& 1;
593 cur_state
= tap_state_transition(cur_state
, bit
);
594 moves
[i
] = cur_state
;
597 jtag_add_pathmove(tms_count
, moves
);
599 else if (tap_state_transition(cur_state
, true) == goal_state
600 || tap_state_transition(cur_state
, false) == goal_state
)
602 jtag_add_pathmove(1, &goal_state
);
611 void jtag_add_runtest(int num_cycles
, tap_state_t state
)
614 jtag_set_error(interface_jtag_add_runtest(num_cycles
, state
));
618 void jtag_add_clocks(int num_cycles
)
620 if (!tap_is_state_stable(cmd_queue_cur_state
))
622 LOG_ERROR("jtag_add_clocks() called with TAP in unstable state \"%s\"",
623 tap_state_name(cmd_queue_cur_state
));
624 jtag_set_error(ERROR_JTAG_NOT_STABLE_STATE
);
631 jtag_set_error(interface_jtag_add_clocks(num_cycles
));
635 void jtag_add_reset(int req_tlr_or_trst
, int req_srst
)
637 int trst_with_tlr
= 0;
641 /* Without SRST, we must use target-specific JTAG operations
642 * on each target; callers should not be requesting SRST when
643 * that signal doesn't exist.
645 * RESET_SRST_PULLS_TRST is a board or chip level quirk, which
646 * can kick in even if the JTAG adapter can't drive TRST.
649 if (!(jtag_reset_config
& RESET_HAS_SRST
)) {
650 LOG_ERROR("BUG: can't assert SRST");
651 jtag_set_error(ERROR_FAIL
);
654 if ((jtag_reset_config
& RESET_SRST_PULLS_TRST
) != 0
655 && !req_tlr_or_trst
) {
656 LOG_ERROR("BUG: can't assert only SRST");
657 jtag_set_error(ERROR_FAIL
);
663 /* JTAG reset (entry to TAP_RESET state) can always be achieved
664 * using TCK and TMS; that may go through a TAP_{IR,DR}UPDATE
665 * state first. TRST accelerates it, and bypasses those states.
667 * RESET_TRST_PULLS_SRST is a board or chip level quirk, which
668 * can kick in even if the JTAG adapter can't drive SRST.
670 if (req_tlr_or_trst
) {
671 if (!(jtag_reset_config
& RESET_HAS_TRST
))
673 else if ((jtag_reset_config
& RESET_TRST_PULLS_SRST
) != 0
680 /* Maybe change TRST and/or SRST signal state */
681 if (jtag_srst
!= new_srst
|| jtag_trst
!= new_trst
) {
684 retval
= interface_jtag_add_reset(new_trst
, new_srst
);
685 if (retval
!= ERROR_OK
)
686 jtag_set_error(retval
);
688 retval
= jtag_execute_queue();
690 if (retval
!= ERROR_OK
) {
691 LOG_ERROR("TRST/SRST error %d", retval
);
696 /* SRST resets everything hooked up to that signal */
697 if (jtag_srst
!= new_srst
) {
698 jtag_srst
= new_srst
;
701 LOG_DEBUG("SRST line asserted");
702 if (adapter_nsrst_assert_width
)
703 jtag_add_sleep(adapter_nsrst_assert_width
* 1000);
706 LOG_DEBUG("SRST line released");
707 if (adapter_nsrst_delay
)
708 jtag_add_sleep(adapter_nsrst_delay
* 1000);
712 /* Maybe enter the JTAG TAP_RESET state ...
713 * - using only TMS, TCK, and the JTAG state machine
714 * - or else more directly, using TRST
716 * TAP_RESET should be invisible to non-debug parts of the system.
719 LOG_DEBUG("JTAG reset with TLR instead of TRST");
720 jtag_set_end_state(TAP_RESET
);
723 } else if (jtag_trst
!= new_trst
) {
724 jtag_trst
= new_trst
;
726 LOG_DEBUG("TRST line asserted");
727 tap_set_state(TAP_RESET
);
728 if (jtag_ntrst_assert_width
)
729 jtag_add_sleep(jtag_ntrst_assert_width
* 1000);
731 LOG_DEBUG("TRST line released");
732 if (jtag_ntrst_delay
)
733 jtag_add_sleep(jtag_ntrst_delay
* 1000);
735 /* We just asserted nTRST, so we're now in TAP_RESET.
736 * Inform possible listeners about this, now that
737 * JTAG instructions and data can be shifted. This
738 * sequence must match jtag_add_tlr().
740 jtag_call_event_callbacks(JTAG_TRST_ASSERTED
);
741 jtag_notify_event(JTAG_TRST_ASSERTED
);
746 /* DEPRECATED! store such global state outside JTAG layer */
747 void jtag_set_end_state(tap_state_t state
)
749 if ((state
== TAP_DRSHIFT
)||(state
== TAP_IRSHIFT
))
751 LOG_ERROR("BUG: TAP_DRSHIFT/IRSHIFT can't be end state. Calling code should use a larger scan field");
754 if (state
!= TAP_INVALID
)
755 cmd_queue_end_state
= state
;
758 /* DEPRECATED! store such global state outside JTAG layer */
759 tap_state_t
jtag_get_end_state(void)
761 return cmd_queue_end_state
;
764 void jtag_add_sleep(uint32_t us
)
766 /// @todo Here, keep_alive() appears to be a layering violation!!!
768 jtag_set_error(interface_jtag_add_sleep(us
));
771 static int jtag_check_value_inner(uint8_t *captured
, uint8_t *in_check_value
,
772 uint8_t *in_check_mask
, int num_bits
)
774 int retval
= ERROR_OK
;
778 compare_failed
= buf_cmp_mask(captured
, in_check_value
, in_check_mask
, num_bits
);
780 compare_failed
= buf_cmp(captured
, in_check_value
, num_bits
);
782 if (compare_failed
) {
783 char *captured_str
, *in_check_value_str
;
784 int bits
= (num_bits
> DEBUG_JTAG_IOZ
)
788 /* NOTE: we've lost diagnostic context here -- 'which tap' */
790 captured_str
= buf_to_str(captured
, bits
, 16);
791 in_check_value_str
= buf_to_str(in_check_value
, bits
, 16);
793 LOG_WARNING("Bad value '%s' captured during DR or IR scan:",
795 LOG_WARNING(" check_value: 0x%s", in_check_value_str
);
798 free(in_check_value_str
);
801 char *in_check_mask_str
;
803 in_check_mask_str
= buf_to_str(in_check_mask
, bits
, 16);
804 LOG_WARNING(" check_mask: 0x%s", in_check_mask_str
);
805 free(in_check_mask_str
);
808 retval
= ERROR_JTAG_QUEUE_FAILED
;
813 void jtag_check_value_mask(struct scan_field
*field
, uint8_t *value
, uint8_t *mask
)
815 assert(field
->in_value
!= NULL
);
819 /* no checking to do */
823 jtag_execute_queue_noclear();
825 int retval
= jtag_check_value_inner(field
->in_value
, value
, mask
, field
->num_bits
);
826 jtag_set_error(retval
);
831 int default_interface_jtag_execute_queue(void)
835 LOG_ERROR("No JTAG interface configured yet. "
836 "Issue 'init' command in startup scripts "
837 "before communicating with targets.");
841 return jtag
->execute_queue();
844 void jtag_execute_queue_noclear(void)
846 jtag_flush_queue_count
++;
847 jtag_set_error(interface_jtag_execute_queue());
850 int jtag_get_flush_queue_count(void)
852 return jtag_flush_queue_count
;
855 int jtag_execute_queue(void)
857 jtag_execute_queue_noclear();
858 return jtag_error_clear();
861 static int jtag_reset_callback(enum jtag_event event
, void *priv
)
863 struct jtag_tap
*tap
= priv
;
865 if (event
== JTAG_TRST_ASSERTED
)
867 tap
->enabled
= !tap
->disabled_after_reset
;
869 /* current instruction is either BYPASS or IDCODE */
870 buf_set_ones(tap
->cur_instr
, tap
->ir_length
);
877 void jtag_sleep(uint32_t us
)
879 alive_sleep(us
/1000);
882 /* Maximum number of enabled JTAG devices we expect in the scan chain,
883 * plus one (to detect garbage at the end). Devices that don't support
884 * IDCODE take up fewer bits, possibly allowing a few more devices.
886 #define JTAG_MAX_CHAIN_SIZE 20
888 #define EXTRACT_MFG(X) (((X) & 0xffe) >> 1)
889 #define EXTRACT_PART(X) (((X) & 0xffff000) >> 12)
890 #define EXTRACT_VER(X) (((X) & 0xf0000000) >> 28)
892 /* A reserved manufacturer ID is used in END_OF_CHAIN_FLAG, so we
893 * know that no valid TAP will have it as an IDCODE value.
895 #define END_OF_CHAIN_FLAG 0x000000ff
897 /* a larger IR length than we ever expect to autoprobe */
898 #define JTAG_IRLEN_MAX 60
900 static int jtag_examine_chain_execute(uint8_t *idcode_buffer
, unsigned num_idcode
)
902 struct scan_field field
= {
903 .num_bits
= num_idcode
* 32,
904 .out_value
= idcode_buffer
,
905 .in_value
= idcode_buffer
,
908 // initialize to the end of chain ID value
909 for (unsigned i
= 0; i
< JTAG_MAX_CHAIN_SIZE
; i
++)
910 buf_set_u32(idcode_buffer
, i
* 32, 32, END_OF_CHAIN_FLAG
);
912 jtag_add_plain_dr_scan(field
.num_bits
, field
.out_value
, field
.in_value
, TAP_DRPAUSE
);
914 return jtag_execute_queue();
917 static bool jtag_examine_chain_check(uint8_t *idcodes
, unsigned count
)
919 uint8_t zero_check
= 0x0;
920 uint8_t one_check
= 0xff;
922 for (unsigned i
= 0; i
< count
* 4; i
++)
924 zero_check
|= idcodes
[i
];
925 one_check
&= idcodes
[i
];
928 /* if there wasn't a single non-zero bit or if all bits were one,
929 * the scan is not valid. We wrote a mix of both values; either
931 * - There's a hardware issue (almost certainly):
932 * + all-zeroes can mean a target stuck in JTAG reset
933 * + all-ones tends to mean no target
934 * - The scan chain is WAY longer than we can handle, *AND* either
935 * + there are several hundreds of TAPs in bypass, or
936 * + at least a few dozen TAPs all have an all-ones IDCODE
938 if (zero_check
== 0x00 || one_check
== 0xff)
940 LOG_ERROR("JTAG scan chain interrogation failed: all %s",
941 (zero_check
== 0x00) ? "zeroes" : "ones");
942 LOG_ERROR("Check JTAG interface, timings, target power, etc.");
948 static void jtag_examine_chain_display(enum log_levels level
, const char *msg
,
949 const char *name
, uint32_t idcode
)
951 log_printf_lf(level
, __FILE__
, __LINE__
, __FUNCTION__
,
952 "JTAG tap: %s %16.16s: 0x%08x "
953 "(mfg: 0x%3.3x, part: 0x%4.4x, ver: 0x%1.1x)",
955 (unsigned int)idcode
,
956 (unsigned int)EXTRACT_MFG(idcode
),
957 (unsigned int)EXTRACT_PART(idcode
),
958 (unsigned int)EXTRACT_VER(idcode
));
961 static bool jtag_idcode_is_final(uint32_t idcode
)
964 * Some devices, such as AVR8, will output all 1's instead
965 * of TDI input value at end of chain. Allow those values
966 * instead of failing.
968 return idcode
== END_OF_CHAIN_FLAG
|| idcode
== 0xFFFFFFFF;
972 * This helper checks that remaining bits in the examined chain data are
973 * all as expected, but a single JTAG device requires only 64 bits to be
974 * read back correctly. This can help identify and diagnose problems
975 * with the JTAG chain earlier, gives more helpful/explicit error messages.
976 * Returns TRUE iff garbage was found.
978 static bool jtag_examine_chain_end(uint8_t *idcodes
, unsigned count
, unsigned max
)
980 bool triggered
= false;
981 for (; count
< max
- 31; count
+= 32)
983 uint32_t idcode
= buf_get_u32(idcodes
, count
, 32);
985 /* do not trigger the warning if the data looks good */
986 if (jtag_idcode_is_final(idcode
))
988 LOG_WARNING("Unexpected idcode after end of chain: %d 0x%08x",
989 count
, (unsigned int)idcode
);
995 static bool jtag_examine_chain_match_tap(const struct jtag_tap
*tap
)
997 uint32_t idcode
= tap
->idcode
;
999 /* ignore expected BYPASS codes; warn otherwise */
1000 if (0 == tap
->expected_ids_cnt
&& !idcode
)
1003 /* optionally ignore the JTAG version field */
1004 uint32_t mask
= tap
->ignore_version
? ~(0xff << 24) : ~0;
1008 /* Loop over the expected identification codes and test for a match */
1009 unsigned ii
, limit
= tap
->expected_ids_cnt
;
1011 for (ii
= 0; ii
< limit
; ii
++)
1013 uint32_t expected
= tap
->expected_ids
[ii
] & mask
;
1015 if (idcode
== expected
)
1018 /* treat "-expected-id 0" as a "don't-warn" wildcard */
1019 if (0 == tap
->expected_ids
[ii
])
1023 /* If none of the expected ids matched, warn */
1024 jtag_examine_chain_display(LOG_LVL_WARNING
, "UNEXPECTED",
1025 tap
->dotted_name
, tap
->idcode
);
1026 for (ii
= 0; ii
< limit
; ii
++)
1030 snprintf(msg
, sizeof(msg
), "expected %u of %u", ii
+ 1, limit
);
1031 jtag_examine_chain_display(LOG_LVL_ERROR
, msg
,
1032 tap
->dotted_name
, tap
->expected_ids
[ii
]);
1037 /* Try to examine chain layout according to IEEE 1149.1 §12
1038 * This is called a "blind interrogation" of the scan chain.
1040 static int jtag_examine_chain(void)
1042 uint8_t idcode_buffer
[JTAG_MAX_CHAIN_SIZE
* 4];
1046 bool autoprobe
= false;
1048 /* DR scan to collect BYPASS or IDCODE register contents.
1049 * Then make sure the scan data has both ones and zeroes.
1051 LOG_DEBUG("DR scan interrogation for IDCODE/BYPASS");
1052 retval
= jtag_examine_chain_execute(idcode_buffer
, JTAG_MAX_CHAIN_SIZE
);
1053 if (retval
!= ERROR_OK
)
1055 if (!jtag_examine_chain_check(idcode_buffer
, JTAG_MAX_CHAIN_SIZE
))
1056 return ERROR_JTAG_INIT_FAILED
;
1058 /* point at the 1st tap */
1059 struct jtag_tap
*tap
= jtag_tap_next_enabled(NULL
);
1065 tap
&& bit_count
< (JTAG_MAX_CHAIN_SIZE
* 32) - 31;
1066 tap
= jtag_tap_next_enabled(tap
))
1068 uint32_t idcode
= buf_get_u32(idcode_buffer
, bit_count
, 32);
1070 if ((idcode
& 1) == 0)
1072 /* Zero for LSB indicates a device in bypass */
1073 LOG_INFO("TAP %s does not have IDCODE",
1076 tap
->hasidcode
= false;
1082 /* Friendly devices support IDCODE */
1083 tap
->hasidcode
= true;
1084 jtag_examine_chain_display(LOG_LVL_INFO
,
1086 tap
->dotted_name
, idcode
);
1090 tap
->idcode
= idcode
;
1092 /* ensure the TAP ID matches what was expected */
1093 if (!jtag_examine_chain_match_tap(tap
))
1094 retval
= ERROR_JTAG_INIT_SOFT_FAIL
;
1097 /* Fail if too many TAPs were enabled for us to verify them all. */
1099 LOG_ERROR("Too many TAPs enabled; '%s' ignored.",
1101 return ERROR_JTAG_INIT_FAILED
;
1104 /* if autoprobing, the tap list is still empty ... populate it! */
1105 while (autoprobe
&& bit_count
< (JTAG_MAX_CHAIN_SIZE
* 32) - 31) {
1109 /* Is there another TAP? */
1110 idcode
= buf_get_u32(idcode_buffer
, bit_count
, 32);
1111 if (jtag_idcode_is_final(idcode
))
1114 /* Default everything in this TAP except IR length.
1116 * REVISIT create a jtag_alloc(chip, tap) routine, and
1117 * share it with jim_newtap_cmd().
1119 tap
= calloc(1, sizeof *tap
);
1123 sprintf(buf
, "auto%d", tapcount
++);
1124 tap
->chip
= strdup(buf
);
1125 tap
->tapname
= strdup("tap");
1127 sprintf(buf
, "%s.%s", tap
->chip
, tap
->tapname
);
1128 tap
->dotted_name
= strdup(buf
);
1130 /* tap->ir_length == 0 ... signifying irlen autoprobe */
1131 tap
->ir_capture_mask
= 0x03;
1132 tap
->ir_capture_value
= 0x01;
1134 tap
->enabled
= true;
1136 if ((idcode
& 1) == 0) {
1138 tap
->hasidcode
= false;
1141 tap
->hasidcode
= true;
1142 tap
->idcode
= idcode
;
1144 tap
->expected_ids_cnt
= 1;
1145 tap
->expected_ids
= malloc(sizeof(uint32_t));
1146 tap
->expected_ids
[0] = idcode
;
1149 LOG_WARNING("AUTO %s - use \"jtag newtap "
1150 "%s %s -expected-id 0x%8.8" PRIx32
" ...\"",
1151 tap
->dotted_name
, tap
->chip
, tap
->tapname
,
1157 /* After those IDCODE or BYPASS register values should be
1158 * only the data we fed into the scan chain.
1160 if (jtag_examine_chain_end(idcode_buffer
, bit_count
,
1161 8 * sizeof(idcode_buffer
))) {
1162 LOG_ERROR("double-check your JTAG setup (interface, "
1163 "speed, missing TAPs, ...)");
1164 return ERROR_JTAG_INIT_FAILED
;
1167 /* Return success or, for backwards compatibility if only
1168 * some IDCODE values mismatched, a soft/continuable fault.
1174 * Validate the date loaded by entry to the Capture-IR state, to help
1175 * find errors related to scan chain configuration (wrong IR lengths)
1178 * Entry state can be anything. On non-error exit, all TAPs are in
1179 * bypass mode. On error exits, the scan chain is reset.
1181 static int jtag_validate_ircapture(void)
1183 struct jtag_tap
*tap
;
1184 int total_ir_length
= 0;
1185 uint8_t *ir_test
= NULL
;
1186 struct scan_field field
;
1191 /* when autoprobing, accomodate huge IR lengths */
1192 for (tap
= NULL
, total_ir_length
= 0;
1193 (tap
= jtag_tap_next_enabled(tap
)) != NULL
;
1194 total_ir_length
+= tap
->ir_length
) {
1195 if (tap
->ir_length
== 0)
1196 total_ir_length
+= JTAG_IRLEN_MAX
;
1199 /* increase length to add 2 bit sentinel after scan */
1200 total_ir_length
+= 2;
1202 ir_test
= malloc(DIV_ROUND_UP(total_ir_length
, 8));
1203 if (ir_test
== NULL
)
1206 /* after this scan, all TAPs will capture BYPASS instructions */
1207 buf_set_ones(ir_test
, total_ir_length
);
1209 field
.num_bits
= total_ir_length
;
1210 field
.out_value
= ir_test
;
1211 field
.in_value
= ir_test
;
1213 jtag_add_plain_ir_scan(field
.num_bits
, field
.out_value
, field
.in_value
, TAP_IDLE
);
1215 LOG_DEBUG("IR capture validation scan");
1216 retval
= jtag_execute_queue();
1217 if (retval
!= ERROR_OK
)
1224 tap
= jtag_tap_next_enabled(tap
);
1229 /* If we're autoprobing, guess IR lengths. They must be at
1230 * least two bits. Guessing will fail if (a) any TAP does
1231 * not conform to the JTAG spec; or (b) when the upper bits
1232 * captured from some conforming TAP are nonzero. Or if
1233 * (c) an IR length is longer than 32 bits -- which is only
1234 * an implementation limit, which could someday be raised.
1236 * REVISIT optimization: if there's a *single* TAP we can
1237 * lift restrictions (a) and (b) by scanning a recognizable
1238 * pattern before the all-ones BYPASS. Check for where the
1239 * pattern starts in the result, instead of an 0...01 value.
1241 * REVISIT alternative approach: escape to some tcl code
1242 * which could provide more knowledge, based on IDCODE; and
1243 * only guess when that has no success.
1245 if (tap
->ir_length
== 0) {
1247 while ((val
= buf_get_u32(ir_test
, chain_pos
,
1248 tap
->ir_length
+ 1)) == 1
1249 && tap
->ir_length
<= 32) {
1252 LOG_WARNING("AUTO %s - use \"... -irlen %d\"",
1253 jtag_tap_name(tap
), tap
->ir_length
);
1256 /* Validate the two LSBs, which must be 01 per JTAG spec.
1258 * Or ... more bits could be provided by TAP declaration.
1259 * Plus, some taps (notably in i.MX series chips) violate
1260 * this part of the JTAG spec, so their capture mask/value
1261 * attributes might disable this test.
1263 val
= buf_get_u32(ir_test
, chain_pos
, tap
->ir_length
);
1264 if ((val
& tap
->ir_capture_mask
) != tap
->ir_capture_value
) {
1265 LOG_ERROR("%s: IR capture error; saw 0x%0*x not 0x%0*x",
1267 (tap
->ir_length
+ 7) / tap
->ir_length
,
1269 (tap
->ir_length
+ 7) / tap
->ir_length
,
1270 (unsigned) tap
->ir_capture_value
);
1272 retval
= ERROR_JTAG_INIT_FAILED
;
1275 LOG_DEBUG("%s: IR capture 0x%0*x", jtag_tap_name(tap
),
1276 (tap
->ir_length
+ 7) / tap
->ir_length
, val
);
1277 chain_pos
+= tap
->ir_length
;
1280 /* verify the '11' sentinel we wrote is returned at the end */
1281 val
= buf_get_u32(ir_test
, chain_pos
, 2);
1284 char *cbuf
= buf_to_str(ir_test
, total_ir_length
, 16);
1286 LOG_ERROR("IR capture error at bit %d, saw 0x%s not 0x...3",
1289 retval
= ERROR_JTAG_INIT_FAILED
;
1294 if (retval
!= ERROR_OK
) {
1296 jtag_execute_queue();
1302 void jtag_tap_init(struct jtag_tap
*tap
)
1304 unsigned ir_len_bits
;
1305 unsigned ir_len_bytes
;
1307 /* if we're autoprobing, cope with potentially huge ir_length */
1308 ir_len_bits
= tap
->ir_length
? : JTAG_IRLEN_MAX
;
1309 ir_len_bytes
= DIV_ROUND_UP(ir_len_bits
, 8);
1311 tap
->expected
= calloc(1, ir_len_bytes
);
1312 tap
->expected_mask
= calloc(1, ir_len_bytes
);
1313 tap
->cur_instr
= malloc(ir_len_bytes
);
1315 /// @todo cope better with ir_length bigger than 32 bits
1316 if (ir_len_bits
> 32)
1319 buf_set_u32(tap
->expected
, 0, ir_len_bits
, tap
->ir_capture_value
);
1320 buf_set_u32(tap
->expected_mask
, 0, ir_len_bits
, tap
->ir_capture_mask
);
1322 // TAP will be in bypass mode after jtag_validate_ircapture()
1324 buf_set_ones(tap
->cur_instr
, tap
->ir_length
);
1326 // register the reset callback for the TAP
1327 jtag_register_event_callback(&jtag_reset_callback
, tap
);
1329 LOG_DEBUG("Created Tap: %s @ abs position %d, "
1330 "irlen %d, capture: 0x%x mask: 0x%x", tap
->dotted_name
,
1331 tap
->abs_chain_position
, tap
->ir_length
,
1332 (unsigned) tap
->ir_capture_value
,
1333 (unsigned) tap
->ir_capture_mask
);
1337 void jtag_tap_free(struct jtag_tap
*tap
)
1339 jtag_unregister_event_callback(&jtag_reset_callback
, tap
);
1341 /// @todo is anything missing? no memory leaks please
1342 free((void *)tap
->expected
);
1343 free((void *)tap
->expected_ids
);
1344 free((void *)tap
->chip
);
1345 free((void *)tap
->tapname
);
1346 free((void *)tap
->dotted_name
);
1351 * Do low-level setup like initializing registers, output signals,
1354 int adapter_init(struct command_context
*cmd_ctx
)
1359 if (!jtag_interface
)
1361 /* nothing was previously specified by "interface" command */
1362 LOG_ERROR("Debug Adapter has to be specified, "
1363 "see \"interface\" command");
1364 return ERROR_JTAG_INVALID_INTERFACE
;
1367 jtag
= jtag_interface
;
1368 if (jtag_interface
->init() != ERROR_OK
)
1371 return ERROR_JTAG_INIT_FAILED
;
1374 int requested_khz
= jtag_get_speed_khz();
1375 int actual_khz
= requested_khz
;
1376 int retval
= jtag_get_speed_readable(&actual_khz
);
1377 if (ERROR_OK
!= retval
)
1378 LOG_INFO("adapter-specific clock speed value %d", jtag_get_speed());
1379 else if (actual_khz
)
1381 /* Adaptive clocking -- JTAG-specific */
1382 if ((CLOCK_MODE_RCLK
== clock_mode
)
1383 || ((CLOCK_MODE_KHZ
== clock_mode
) && !requested_khz
))
1385 LOG_INFO("RCLK (adaptive clock speed) not supported - fallback to %d kHz"
1389 LOG_INFO("clock speed %d kHz", actual_khz
);
1392 LOG_INFO("RCLK (adaptive clock speed)");
1397 int jtag_init_inner(struct command_context
*cmd_ctx
)
1399 struct jtag_tap
*tap
;
1401 bool issue_setup
= true;
1403 LOG_DEBUG("Init JTAG chain");
1405 tap
= jtag_tap_next_enabled(NULL
);
1407 /* Once JTAG itself is properly set up, and the scan chain
1408 * isn't absurdly large, IDCODE autoprobe should work fine.
1410 * But ... IRLEN autoprobe can fail even on systems which
1411 * are fully conformant to JTAG. Also, JTAG setup can be
1412 * quite finicky on some systems.
1414 * REVISIT: if TAP autoprobe works OK, then in many cases
1415 * we could escape to tcl code and set up targets based on
1416 * the TAP's IDCODE values.
1418 LOG_WARNING("There are no enabled taps. "
1419 "AUTO PROBING MIGHT NOT WORK!!");
1421 /* REVISIT default clock will often be too fast ... */
1425 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
1428 /* Examine DR values first. This discovers problems which will
1429 * prevent communication ... hardware issues like TDO stuck, or
1430 * configuring the wrong number of (enabled) TAPs.
1432 retval
= jtag_examine_chain();
1435 /* complete success */
1437 case ERROR_JTAG_INIT_SOFT_FAIL
:
1438 /* For backward compatibility reasons, try coping with
1439 * configuration errors involving only ID mismatches.
1440 * We might be able to talk to the devices.
1442 LOG_ERROR("Trying to use configured scan chain anyway...");
1443 issue_setup
= false;
1446 /* some hard error; already issued diagnostics */
1450 /* Now look at IR values. Problems here will prevent real
1451 * communication. They mostly mean that the IR length is
1452 * wrong ... or that the IR capture value is wrong. (The
1453 * latter is uncommon, but easily worked around: provide
1454 * ircapture/irmask values during TAP setup.)
1456 retval
= jtag_validate_ircapture();
1457 if (retval
!= ERROR_OK
)
1461 jtag_notify_event(JTAG_TAP_EVENT_SETUP
);
1463 LOG_WARNING("Bypassing JTAG setup events due to errors");
1469 int adapter_quit(void)
1471 if (!jtag
|| !jtag
->quit
)
1474 // close the JTAG interface
1475 int result
= jtag
->quit();
1476 if (ERROR_OK
!= result
)
1477 LOG_ERROR("failed: %d", result
);
1483 int jtag_init_reset(struct command_context
*cmd_ctx
)
1487 if ((retval
= adapter_init(cmd_ctx
)) != ERROR_OK
)
1490 LOG_DEBUG("Initializing with hard TRST+SRST reset");
1493 * This procedure is used by default when OpenOCD triggers a reset.
1494 * It's now done through an overridable Tcl "init_reset" wrapper.
1496 * This started out as a more powerful "get JTAG working" reset than
1497 * jtag_init_inner(), applying TRST because some chips won't activate
1498 * JTAG without a TRST cycle (presumed to be async, though some of
1499 * those chips synchronize JTAG activation using TCK).
1501 * But some chips only activate JTAG as part of an SRST cycle; SRST
1502 * got mixed in. So it became a hard reset routine, which got used
1503 * in more places, and which coped with JTAG reset being forced as
1504 * part of SRST (srst_pulls_trst).
1506 * And even more corner cases started to surface: TRST and/or SRST
1507 * assertion timings matter; some chips need other JTAG operations;
1508 * TRST/SRST sequences can need to be different from these, etc.
1510 * Systems should override that wrapper to support system-specific
1511 * requirements that this not-fully-generic code doesn't handle.
1513 * REVISIT once Tcl code can read the reset_config modes, this won't
1514 * need to be a C routine at all...
1516 jtag_add_reset(1, 0); /* TAP_RESET, using TMS+TCK or TRST */
1517 if (jtag_reset_config
& RESET_HAS_SRST
)
1519 jtag_add_reset(1, 1);
1520 if ((jtag_reset_config
& RESET_SRST_PULLS_TRST
) == 0)
1521 jtag_add_reset(0, 1);
1523 jtag_add_reset(0, 0);
1524 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
1527 /* Check that we can communication on the JTAG chain + eventually we want to
1528 * be able to perform enumeration only after OpenOCD has started
1529 * telnet and GDB server
1531 * That would allow users to more easily perform any magic they need to before
1534 return jtag_init_inner(cmd_ctx
);
1537 int jtag_init(struct command_context
*cmd_ctx
)
1541 if ((retval
= adapter_init(cmd_ctx
)) != ERROR_OK
)
1544 /* guard against oddball hardware: force resets to be inactive */
1545 jtag_add_reset(0, 0);
1546 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
1549 if (Jim_Eval_Named(cmd_ctx
->interp
, "jtag_init", __FILE__
, __LINE__
) != JIM_OK
)
1555 unsigned jtag_get_speed_khz(void)
1560 static int adapter_khz_to_speed(unsigned khz
, int* speed
)
1562 LOG_DEBUG("convert khz to interface specific speed value");
1566 LOG_DEBUG("have interface set up");
1568 int retval
= jtag
->khz(jtag_get_speed_khz(), &speed_div1
);
1569 if (ERROR_OK
!= retval
)
1573 *speed
= speed_div1
;
1578 static int jtag_rclk_to_speed(unsigned fallback_speed_khz
, int* speed
)
1580 int retval
= adapter_khz_to_speed(0, speed
);
1581 if ((ERROR_OK
!= retval
) && fallback_speed_khz
)
1583 LOG_DEBUG("trying fallback speed...");
1584 retval
= adapter_khz_to_speed(fallback_speed_khz
, speed
);
1589 static int jtag_set_speed(int speed
)
1592 /* this command can be called during CONFIG,
1593 * in which case jtag isn't initialized */
1594 return jtag
? jtag
->speed(speed
) : ERROR_OK
;
1597 int jtag_config_khz(unsigned khz
)
1599 LOG_DEBUG("handle jtag khz");
1600 clock_mode
= CLOCK_MODE_KHZ
;
1602 int retval
= adapter_khz_to_speed(khz
, &speed
);
1603 return (ERROR_OK
!= retval
) ? retval
: jtag_set_speed(speed
);
1606 int jtag_config_rclk(unsigned fallback_speed_khz
)
1608 LOG_DEBUG("handle jtag rclk");
1609 clock_mode
= CLOCK_MODE_RCLK
;
1610 rclk_fallback_speed_khz
= fallback_speed_khz
;
1612 int retval
= jtag_rclk_to_speed(fallback_speed_khz
, &speed
);
1613 return (ERROR_OK
!= retval
) ? retval
: jtag_set_speed(speed
);
1616 int jtag_get_speed(void)
1621 case CLOCK_MODE_SPEED
:
1624 case CLOCK_MODE_KHZ
:
1625 adapter_khz_to_speed(jtag_get_speed_khz(), &speed
);
1627 case CLOCK_MODE_RCLK
:
1628 jtag_rclk_to_speed(rclk_fallback_speed_khz
, &speed
);
1631 LOG_ERROR("BUG: unknown jtag clock mode");
1638 int jtag_get_speed_readable(int *khz
)
1640 return jtag
? jtag
->speed_div(jtag_get_speed(), khz
) : ERROR_OK
;
1643 void jtag_set_verify(bool enable
)
1645 jtag_verify
= enable
;
1648 bool jtag_will_verify()
1653 void jtag_set_verify_capture_ir(bool enable
)
1655 jtag_verify_capture_ir
= enable
;
1658 bool jtag_will_verify_capture_ir()
1660 return jtag_verify_capture_ir
;
1663 int jtag_power_dropout(int *dropout
)
1667 /* TODO: as the jtag interface is not valid all
1668 * we can do at the moment is exit OpenOCD */
1669 LOG_ERROR("No Valid JTAG Interface Configured.");
1672 return jtag
->power_dropout(dropout
);
1675 int jtag_srst_asserted(int *srst_asserted
)
1677 return jtag
->srst_asserted(srst_asserted
);
1680 enum reset_types
jtag_get_reset_config(void)
1682 return jtag_reset_config
;
1684 void jtag_set_reset_config(enum reset_types type
)
1686 jtag_reset_config
= type
;
1689 int jtag_get_trst(void)
1693 int jtag_get_srst(void)
1698 void jtag_set_nsrst_delay(unsigned delay
)
1700 adapter_nsrst_delay
= delay
;
1702 unsigned jtag_get_nsrst_delay(void)
1704 return adapter_nsrst_delay
;
1706 void jtag_set_ntrst_delay(unsigned delay
)
1708 jtag_ntrst_delay
= delay
;
1710 unsigned jtag_get_ntrst_delay(void)
1712 return jtag_ntrst_delay
;
1716 void jtag_set_nsrst_assert_width(unsigned delay
)
1718 adapter_nsrst_assert_width
= delay
;
1720 unsigned jtag_get_nsrst_assert_width(void)
1722 return adapter_nsrst_assert_width
;
1724 void jtag_set_ntrst_assert_width(unsigned delay
)
1726 jtag_ntrst_assert_width
= delay
;
1728 unsigned jtag_get_ntrst_assert_width(void)
1730 return jtag_ntrst_assert_width
;
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)