Code Review / openocd.git / blob
? search:
summary | shortlog | log | commit | commitdiff | review | tree
history | raw | HEAD
stm32f07/9: Both devices have 256 kByte Flash Maximum.
[openocd.git] / src / flash / nor / stm32f1x.c
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * Copyright (C) 2008 by Spencer Oliver *
6 * spen@spen-soft.co.uk *
7 * *
8 * Copyright (C) 2011 by Andreas Fritiofson *
9 * andreas.fritiofson@gmail.com *
10 *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
15 * *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
20 * *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
25 ***************************************************************************/
26
27 #ifdef HAVE_CONFIG_H
28 #include "config.h"
29 #endif
30
31 #include "imp.h"
32 #include <helper/binarybuffer.h>
33 #include <target/algorithm.h>
34 #include <target/armv7m.h>
35
36 /* stm32x register locations */
37
38 #define FLASH_REG_BASE_B0 0x40022000
39 #define FLASH_REG_BASE_B1 0x40022040
40
41 #define STM32_FLASH_ACR 0x00
42 #define STM32_FLASH_KEYR 0x04
43 #define STM32_FLASH_OPTKEYR 0x08
44 #define STM32_FLASH_SR 0x0C
45 #define STM32_FLASH_CR 0x10
46 #define STM32_FLASH_AR 0x14
47 #define STM32_FLASH_OBR 0x1C
48 #define STM32_FLASH_WRPR 0x20
49
50 /* TODO: Check if code using these really should be hard coded to bank 0.
51 * There are valid cases, on dual flash devices the protection of the
52 * second bank is done on the bank0 reg's. */
53 #define STM32_FLASH_ACR_B0 0x40022000
54 #define STM32_FLASH_KEYR_B0 0x40022004
55 #define STM32_FLASH_OPTKEYR_B0 0x40022008
56 #define STM32_FLASH_SR_B0 0x4002200C
57 #define STM32_FLASH_CR_B0 0x40022010
58 #define STM32_FLASH_AR_B0 0x40022014
59 #define STM32_FLASH_OBR_B0 0x4002201C
60 #define STM32_FLASH_WRPR_B0 0x40022020
61
62 /* option byte location */
63
64 #define STM32_OB_RDP 0x1FFFF800
65 #define STM32_OB_USER 0x1FFFF802
66 #define STM32_OB_DATA0 0x1FFFF804
67 #define STM32_OB_DATA1 0x1FFFF806
68 #define STM32_OB_WRP0 0x1FFFF808
69 #define STM32_OB_WRP1 0x1FFFF80A
70 #define STM32_OB_WRP2 0x1FFFF80C
71 #define STM32_OB_WRP3 0x1FFFF80E
72
73 /* FLASH_CR register bits */
74
75 #define FLASH_PG (1 << 0)
76 #define FLASH_PER (1 << 1)
77 #define FLASH_MER (1 << 2)
78 #define FLASH_OPTPG (1 << 4)
79 #define FLASH_OPTER (1 << 5)
80 #define FLASH_STRT (1 << 6)
81 #define FLASH_LOCK (1 << 7)
82 #define FLASH_OPTWRE (1 << 9)
83
84 /* FLASH_SR register bits */
85
86 #define FLASH_BSY (1 << 0)
87 #define FLASH_PGERR (1 << 2)
88 #define FLASH_WRPRTERR (1 << 4)
89 #define FLASH_EOP (1 << 5)
90
91 /* STM32_FLASH_OBR bit definitions (reading) */
92
93 #define OPT_ERROR 0
94 #define OPT_READOUT 1
95 #define OPT_RDWDGSW 2
96 #define OPT_RDRSTSTOP 3
97 #define OPT_RDRSTSTDBY 4
98 #define OPT_BFB2 5 /* dual flash bank only */
99
100 /* register unlock keys */
101
102 #define KEY1 0x45670123
103 #define KEY2 0xCDEF89AB
104
105 /* timeout values */
106
107 #define FLASH_WRITE_TIMEOUT 10
108 #define FLASH_ERASE_TIMEOUT 100
109
110 struct stm32x_options {
111 uint16_t RDP;
112 uint16_t user_options;
113 uint16_t user_data;
114 uint16_t protection[4];
115 };
116
117 struct stm32x_flash_bank {
118 struct stm32x_options option_bytes;
119 int ppage_size;
120 int probed;
121
122 bool has_dual_banks;
123 /* used to access dual flash bank stm32xl */
124 uint32_t register_base;
125 uint16_t default_rdp;
126 int user_data_offset;
127 int option_offset;
128 uint32_t user_bank_size;
129 };
130
131 static int stm32x_mass_erase(struct flash_bank *bank);
132 static int stm32x_get_device_id(struct flash_bank *bank, uint32_t *device_id);
133 static int stm32x_write_block(struct flash_bank *bank, const uint8_t *buffer,
134 uint32_t offset, uint32_t count);
135
136 /* flash bank stm32x <base> <size> 0 0 <target#>
137 */
138 FLASH_BANK_COMMAND_HANDLER(stm32x_flash_bank_command)
139 {
140 struct stm32x_flash_bank *stm32x_info;
141
142 if (CMD_ARGC < 6)
143 return ERROR_COMMAND_SYNTAX_ERROR;
144
145 stm32x_info = malloc(sizeof(struct stm32x_flash_bank));
146
147 bank->driver_priv = stm32x_info;
148 stm32x_info->probed = 0;
149 stm32x_info->has_dual_banks = false;
150 stm32x_info->register_base = FLASH_REG_BASE_B0;
151 stm32x_info->user_bank_size = bank->size;
152
153 return ERROR_OK;
154 }
155
156 static inline int stm32x_get_flash_reg(struct flash_bank *bank, uint32_t reg)
157 {
158 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
159 return reg + stm32x_info->register_base;
160 }
161
162 static inline int stm32x_get_flash_status(struct flash_bank *bank, uint32_t *status)
163 {
164 struct target *target = bank->target;
165 return target_read_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR), status);
166 }
167
168 static int stm32x_wait_status_busy(struct flash_bank *bank, int timeout)
169 {
170 struct target *target = bank->target;
171 uint32_t status;
172 int retval = ERROR_OK;
173
174 /* wait for busy to clear */
175 for (;;) {
176 retval = stm32x_get_flash_status(bank, &status);
177 if (retval != ERROR_OK)
178 return retval;
179 LOG_DEBUG("status: 0x%" PRIx32 "", status);
180 if ((status & FLASH_BSY) == 0)
181 break;
182 if (timeout-- <= 0) {
183 LOG_ERROR("timed out waiting for flash");
184 return ERROR_FAIL;
185 }
186 alive_sleep(1);
187 }
188
189 if (status & FLASH_WRPRTERR) {
190 LOG_ERROR("stm32x device protected");
191 retval = ERROR_FAIL;
192 }
193
194 if (status & FLASH_PGERR) {
195 LOG_ERROR("stm32x device programming failed");
196 retval = ERROR_FAIL;
197 }
198
199 /* Clear but report errors */
200 if (status & (FLASH_WRPRTERR | FLASH_PGERR)) {
201 /* If this operation fails, we ignore it and report the original
202 * retval
203 */
204 target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR),
205 FLASH_WRPRTERR | FLASH_PGERR);
206 }
207 return retval;
208 }
209
210 static int stm32x_check_operation_supported(struct flash_bank *bank)
211 {
212 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
213
214 /* if we have a dual flash bank device then
215 * we need to perform option byte stuff on bank0 only */
216 if (stm32x_info->register_base != FLASH_REG_BASE_B0) {
217 LOG_ERROR("Option Byte Operation's must use bank0");
218 return ERROR_FLASH_OPERATION_FAILED;
219 }
220
221 return ERROR_OK;
222 }
223
224 static int stm32x_read_options(struct flash_bank *bank)
225 {
226 uint32_t optiondata;
227 struct stm32x_flash_bank *stm32x_info = NULL;
228 struct target *target = bank->target;
229
230 stm32x_info = bank->driver_priv;
231
232 /* read current option bytes */
233 int retval = target_read_u32(target, STM32_FLASH_OBR_B0, &optiondata);
234 if (retval != ERROR_OK)
235 return retval;
236
237 stm32x_info->option_bytes.user_options = (optiondata >> stm32x_info->option_offset >> 2) & 0xffff;
238 stm32x_info->option_bytes.user_data = (optiondata >> stm32x_info->user_data_offset) & 0xffff;
239 stm32x_info->option_bytes.RDP = (optiondata & (1 << OPT_READOUT)) ? 0xFFFF : 0x5AA5;
240
241 if (optiondata & (1 << OPT_READOUT))
242 LOG_INFO("Device Security Bit Set");
243
244 /* each bit refers to a 4bank protection */
245 retval = target_read_u32(target, STM32_FLASH_WRPR_B0, &optiondata);
246 if (retval != ERROR_OK)
247 return retval;
248
249 stm32x_info->option_bytes.protection[0] = (uint16_t)optiondata;
250 stm32x_info->option_bytes.protection[1] = (uint16_t)(optiondata >> 8);
251 stm32x_info->option_bytes.protection[2] = (uint16_t)(optiondata >> 16);
252 stm32x_info->option_bytes.protection[3] = (uint16_t)(optiondata >> 24);
253
254 return ERROR_OK;
255 }
256
257 static int stm32x_erase_options(struct flash_bank *bank)
258 {
259 struct stm32x_flash_bank *stm32x_info = NULL;
260 struct target *target = bank->target;
261
262 stm32x_info = bank->driver_priv;
263
264 /* read current options */
265 stm32x_read_options(bank);
266
267 /* unlock flash registers */
268 int retval = target_write_u32(target, STM32_FLASH_KEYR_B0, KEY1);
269 if (retval != ERROR_OK)
270 return retval;
271
272 retval = target_write_u32(target, STM32_FLASH_KEYR_B0, KEY2);
273 if (retval != ERROR_OK)
274 return retval;
275
276 /* unlock option flash registers */
277 retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY1);
278 if (retval != ERROR_OK)
279 return retval;
280 retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY2);
281 if (retval != ERROR_OK)
282 return retval;
283
284 /* erase option bytes */
285 retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_OPTER | FLASH_OPTWRE);
286 if (retval != ERROR_OK)
287 return retval;
288 retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_OPTER | FLASH_STRT | FLASH_OPTWRE);
289 if (retval != ERROR_OK)
290 return retval;
291
292 retval = stm32x_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
293 if (retval != ERROR_OK)
294 return retval;
295
296 /* clear readout protection and complementary option bytes
297 * this will also force a device unlock if set */
298 stm32x_info->option_bytes.RDP = stm32x_info->default_rdp;
299
300 return ERROR_OK;
301 }
302
303 static int stm32x_write_options(struct flash_bank *bank)
304 {
305 struct stm32x_flash_bank *stm32x_info = NULL;
306 struct target *target = bank->target;
307
308 stm32x_info = bank->driver_priv;
309
310 /* unlock flash registers */
311 int retval = target_write_u32(target, STM32_FLASH_KEYR_B0, KEY1);
312 if (retval != ERROR_OK)
313 return retval;
314 retval = target_write_u32(target, STM32_FLASH_KEYR_B0, KEY2);
315 if (retval != ERROR_OK)
316 return retval;
317
318 /* unlock option flash registers */
319 retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY1);
320 if (retval != ERROR_OK)
321 return retval;
322 retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY2);
323 if (retval != ERROR_OK)
324 return retval;
325
326 /* program option bytes */
327 retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_OPTPG | FLASH_OPTWRE);
328 if (retval != ERROR_OK)
329 return retval;
330
331 uint8_t opt_bytes[16];
332
333 target_buffer_set_u16(target, opt_bytes, stm32x_info->option_bytes.RDP);
334 target_buffer_set_u16(target, opt_bytes + 2, stm32x_info->option_bytes.user_options);
335 target_buffer_set_u16(target, opt_bytes + 4, stm32x_info->option_bytes.user_data & 0xff);
336 target_buffer_set_u16(target, opt_bytes + 6, (stm32x_info->option_bytes.user_data >> 8) & 0xff);
337 target_buffer_set_u16(target, opt_bytes + 8, stm32x_info->option_bytes.protection[0]);
338 target_buffer_set_u16(target, opt_bytes + 10, stm32x_info->option_bytes.protection[1]);
339 target_buffer_set_u16(target, opt_bytes + 12, stm32x_info->option_bytes.protection[2]);
340 target_buffer_set_u16(target, opt_bytes + 14, stm32x_info->option_bytes.protection[3]);
341
342 uint32_t offset = STM32_OB_RDP - bank->base;
343 retval = stm32x_write_block(bank, opt_bytes, offset, sizeof(opt_bytes) / 2);
344 if (retval != ERROR_OK) {
345 if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
346 LOG_ERROR("working area required to erase options bytes");
347 return retval;
348 }
349
350 retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_LOCK);
351 if (retval != ERROR_OK)
352 return retval;
353
354 return ERROR_OK;
355 }
356
357 static int stm32x_protect_check(struct flash_bank *bank)
358 {
359 struct target *target = bank->target;
360 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
361
362 uint32_t protection;
363 int i, s;
364 int num_bits;
365 int set;
366
367 int retval = stm32x_check_operation_supported(bank);
368 if (ERROR_OK != retval)
369 return retval;
370
371 /* medium density - each bit refers to a 4bank protection
372 * high density - each bit refers to a 2bank protection */
373 retval = target_read_u32(target, STM32_FLASH_WRPR_B0, &protection);
374 if (retval != ERROR_OK)
375 return retval;
376
377 /* medium density - each protection bit is for 4 * 1K pages
378 * high density - each protection bit is for 2 * 2K pages */
379 num_bits = (bank->num_sectors / stm32x_info->ppage_size);
380
381 if (stm32x_info->ppage_size == 2) {
382 /* high density flash/connectivity line protection */
383
384 set = 1;
385
386 if (protection & (1 << 31))
387 set = 0;
388
389 /* bit 31 controls sector 62 - 255 protection for high density
390 * bit 31 controls sector 62 - 127 protection for connectivity line */
391 for (s = 62; s < bank->num_sectors; s++)
392 bank->sectors[s].is_protected = set;
393
394 if (bank->num_sectors > 61)
395 num_bits = 31;
396
397 for (i = 0; i < num_bits; i++) {
398 set = 1;
399
400 if (protection & (1 << i))
401 set = 0;
402
403 for (s = 0; s < stm32x_info->ppage_size; s++)
404 bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set;
405 }
406 } else {
407 /* low/medium density flash protection */
408 for (i = 0; i < num_bits; i++) {
409 set = 1;
410
411 if (protection & (1 << i))
412 set = 0;
413
414 for (s = 0; s < stm32x_info->ppage_size; s++)
415 bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set;
416 }
417 }
418
419 return ERROR_OK;
420 }
421
422 static int stm32x_erase(struct flash_bank *bank, int first, int last)
423 {
424 struct target *target = bank->target;
425 int i;
426
427 if (bank->target->state != TARGET_HALTED) {
428 LOG_ERROR("Target not halted");
429 return ERROR_TARGET_NOT_HALTED;
430 }
431
432 if ((first == 0) && (last == (bank->num_sectors - 1)))
433 return stm32x_mass_erase(bank);
434
435 /* unlock flash registers */
436 int retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY1);
437 if (retval != ERROR_OK)
438 return retval;
439 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY2);
440 if (retval != ERROR_OK)
441 return retval;
442
443 for (i = first; i <= last; i++) {
444 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PER);
445 if (retval != ERROR_OK)
446 return retval;
447 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_AR),
448 bank->base + bank->sectors[i].offset);
449 if (retval != ERROR_OK)
450 return retval;
451 retval = target_write_u32(target,
452 stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PER | FLASH_STRT);
453 if (retval != ERROR_OK)
454 return retval;
455
456 retval = stm32x_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
457 if (retval != ERROR_OK)
458 return retval;
459
460 bank->sectors[i].is_erased = 1;
461 }
462
463 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
464 if (retval != ERROR_OK)
465 return retval;
466
467 return ERROR_OK;
468 }
469
470 static int stm32x_protect(struct flash_bank *bank, int set, int first, int last)
471 {
472 struct stm32x_flash_bank *stm32x_info = NULL;
473 struct target *target = bank->target;
474 uint16_t prot_reg[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF};
475 int i, reg, bit;
476 int status;
477 uint32_t protection;
478
479 stm32x_info = bank->driver_priv;
480
481 if (target->state != TARGET_HALTED) {
482 LOG_ERROR("Target not halted");
483 return ERROR_TARGET_NOT_HALTED;
484 }
485
486 int retval = stm32x_check_operation_supported(bank);
487 if (ERROR_OK != retval)
488 return retval;
489
490 if ((first % stm32x_info->ppage_size) != 0) {
491 LOG_WARNING("aligned start protect sector to a %d sector boundary",
492 stm32x_info->ppage_size);
493 first = first - (first % stm32x_info->ppage_size);
494 }
495 if (((last + 1) % stm32x_info->ppage_size) != 0) {
496 LOG_WARNING("aligned end protect sector to a %d sector boundary",
497 stm32x_info->ppage_size);
498 last++;
499 last = last - (last % stm32x_info->ppage_size);
500 last--;
501 }
502
503 /* medium density - each bit refers to a 4bank protection
504 * high density - each bit refers to a 2bank protection */
505 retval = target_read_u32(target, STM32_FLASH_WRPR_B0, &protection);
506 if (retval != ERROR_OK)
507 return retval;
508
509 prot_reg[0] = (uint16_t)protection;
510 prot_reg[1] = (uint16_t)(protection >> 8);
511 prot_reg[2] = (uint16_t)(protection >> 16);
512 prot_reg[3] = (uint16_t)(protection >> 24);
513
514 if (stm32x_info->ppage_size == 2) {
515 /* high density flash */
516
517 /* bit 7 controls sector 62 - 255 protection */
518 if (last > 61) {
519 if (set)
520 prot_reg[3] &= ~(1 << 7);
521 else
522 prot_reg[3] |= (1 << 7);
523 }
524
525 if (first > 61)
526 first = 62;
527 if (last > 61)
528 last = 61;
529
530 for (i = first; i <= last; i++) {
531 reg = (i / stm32x_info->ppage_size) / 8;
532 bit = (i / stm32x_info->ppage_size) - (reg * 8);
533
534 if (set)
535 prot_reg[reg] &= ~(1 << bit);
536 else
537 prot_reg[reg] |= (1 << bit);
538 }
539 } else {
540 /* medium density flash */
541 for (i = first; i <= last; i++) {
542 reg = (i / stm32x_info->ppage_size) / 8;
543 bit = (i / stm32x_info->ppage_size) - (reg * 8);
544
545 if (set)
546 prot_reg[reg] &= ~(1 << bit);
547 else
548 prot_reg[reg] |= (1 << bit);
549 }
550 }
551
552 status = stm32x_erase_options(bank);
553 if (status != ERROR_OK)
554 return status;
555
556 stm32x_info->option_bytes.protection[0] = prot_reg[0];
557 stm32x_info->option_bytes.protection[1] = prot_reg[1];
558 stm32x_info->option_bytes.protection[2] = prot_reg[2];
559 stm32x_info->option_bytes.protection[3] = prot_reg[3];
560
561 return stm32x_write_options(bank);
562 }
563
564 static int stm32x_write_block(struct flash_bank *bank, const uint8_t *buffer,
565 uint32_t offset, uint32_t count)
566 {
567 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
568 struct target *target = bank->target;
569 uint32_t buffer_size = 16384;
570 struct working_area *write_algorithm;
571 struct working_area *source;
572 uint32_t address = bank->base + offset;
573 struct reg_param reg_params[5];
574 struct armv7m_algorithm armv7m_info;
575 int retval = ERROR_OK;
576
577 /* see contrib/loaders/flash/stm32f1x.S for src */
578
579 static const uint8_t stm32x_flash_write_code[] = {
580 /* #define STM32_FLASH_SR_OFFSET 0x0C */
581 /* wait_fifo: */
582 0x16, 0x68, /* ldr r6, [r2, #0] */
583 0x00, 0x2e, /* cmp r6, #0 */
584 0x18, 0xd0, /* beq exit */
585 0x55, 0x68, /* ldr r5, [r2, #4] */
586 0xb5, 0x42, /* cmp r5, r6 */
587 0xf9, 0xd0, /* beq wait_fifo */
588 0x2e, 0x88, /* ldrh r6, [r5, #0] */
589 0x26, 0x80, /* strh r6, [r4, #0] */
590 0x02, 0x35, /* adds r5, #2 */
591 0x02, 0x34, /* adds r4, #2 */
592 /* busy: */
593 0xc6, 0x68, /* ldr r6, [r0, #STM32_FLASH_SR_OFFSET] */
594 0x01, 0x27, /* movs r7, #1 */
595 0x3e, 0x42, /* tst r6, r7 */
596 0xfb, 0xd1, /* bne busy */
597 0x14, 0x27, /* movs r7, #0x14 */
598 0x3e, 0x42, /* tst r6, r7 */
599 0x08, 0xd1, /* bne error */
600 0x9d, 0x42, /* cmp r5, r3 */
601 0x01, 0xd3, /* bcc no_wrap */
602 0x15, 0x46, /* mov r5, r2 */
603 0x08, 0x35, /* adds r5, #8 */
604 /* no_wrap: */
605 0x55, 0x60, /* str r5, [r2, #4] */
606 0x01, 0x39, /* subs r1, r1, #1 */
607 0x00, 0x29, /* cmp r1, #0 */
608 0x02, 0xd0, /* beq exit */
609 0xe5, 0xe7, /* b wait_fifo */
610 /* error: */
611 0x00, 0x20, /* movs r0, #0 */
612 0x50, 0x60, /* str r0, [r2, #4] */
613 /* exit: */
614 0x30, 0x46, /* mov r0, r6 */
615 0x00, 0xbe, /* bkpt #0 */
616 };
617
618 /* flash write code */
619 if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code),
620 &write_algorithm) != ERROR_OK) {
621 LOG_WARNING("no working area available, can't do block memory writes");
622 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
623 };
624
625 retval = target_write_buffer(target, write_algorithm->address,
626 sizeof(stm32x_flash_write_code), stm32x_flash_write_code);
627 if (retval != ERROR_OK)
628 return retval;
629
630 /* memory buffer */
631 while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
632 buffer_size /= 2;
633 buffer_size &= ~3UL; /* Make sure it's 4 byte aligned */
634 if (buffer_size <= 256) {
635 /* we already allocated the writing code, but failed to get a
636 * buffer, free the algorithm */
637 target_free_working_area(target, write_algorithm);
638
639 LOG_WARNING("no large enough working area available, can't do block memory writes");
640 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
641 }
642 };
643
644 init_reg_param(&reg_params[0], "r0", 32, PARAM_IN_OUT); /* flash base (in), status (out) */
645 init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT); /* count (halfword-16bit) */
646 init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT); /* buffer start */
647 init_reg_param(&reg_params[3], "r3", 32, PARAM_OUT); /* buffer end */
648 init_reg_param(&reg_params[4], "r4", 32, PARAM_IN_OUT); /* target address */
649
650 buf_set_u32(reg_params[0].value, 0, 32, stm32x_info->register_base);
651 buf_set_u32(reg_params[1].value, 0, 32, count);
652 buf_set_u32(reg_params[2].value, 0, 32, source->address);
653 buf_set_u32(reg_params[3].value, 0, 32, source->address + source->size);
654 buf_set_u32(reg_params[4].value, 0, 32, address);
655
656 armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
657 armv7m_info.core_mode = ARM_MODE_THREAD;
658
659 retval = target_run_flash_async_algorithm(target, buffer, count, 2,
660 0, NULL,
661 5, reg_params,
662 source->address, source->size,
663 write_algorithm->address, 0,
664 &armv7m_info);
665
666 if (retval == ERROR_FLASH_OPERATION_FAILED) {
667 LOG_ERROR("flash write failed at address 0x%"PRIx32,
668 buf_get_u32(reg_params[4].value, 0, 32));
669
670 if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_PGERR) {
671 LOG_ERROR("flash memory not erased before writing");
672 /* Clear but report errors */
673 target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR), FLASH_PGERR);
674 }
675
676 if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_WRPRTERR) {
677 LOG_ERROR("flash memory write protected");
678 /* Clear but report errors */
679 target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR), FLASH_WRPRTERR);
680 }
681 }
682
683 target_free_working_area(target, source);
684 target_free_working_area(target, write_algorithm);
685
686 destroy_reg_param(&reg_params[0]);
687 destroy_reg_param(&reg_params[1]);
688 destroy_reg_param(&reg_params[2]);
689 destroy_reg_param(&reg_params[3]);
690 destroy_reg_param(&reg_params[4]);
691
692 return retval;
693 }
694
695 static int stm32x_write(struct flash_bank *bank, const uint8_t *buffer,
696 uint32_t offset, uint32_t count)
697 {
698 struct target *target = bank->target;
699 uint8_t *new_buffer = NULL;
700
701 if (bank->target->state != TARGET_HALTED) {
702 LOG_ERROR("Target not halted");
703 return ERROR_TARGET_NOT_HALTED;
704 }
705
706 if (offset & 0x1) {
707 LOG_ERROR("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
708 return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
709 }
710
711 /* If there's an odd number of bytes, the data has to be padded. Duplicate
712 * the buffer and use the normal code path with a single block write since
713 * it's probably cheaper than to special case the last odd write using
714 * discrete accesses. */
715 if (count & 1) {
716 new_buffer = malloc(count + 1);
717 if (new_buffer == NULL) {
718 LOG_ERROR("odd number of bytes to write and no memory for padding buffer");
719 return ERROR_FAIL;
720 }
721 LOG_INFO("odd number of bytes to write, padding with 0xff");
722 buffer = memcpy(new_buffer, buffer, count);
723 new_buffer[count++] = 0xff;
724 }
725
726 uint32_t words_remaining = count / 2;
727 int retval, retval2;
728
729 /* unlock flash registers */
730 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY1);
731 if (retval != ERROR_OK)
732 goto cleanup;
733 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY2);
734 if (retval != ERROR_OK)
735 goto cleanup;
736
737 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PG);
738 if (retval != ERROR_OK)
739 goto cleanup;
740
741 /* try using a block write */
742 retval = stm32x_write_block(bank, buffer, offset, words_remaining);
743
744 if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
745 /* if block write failed (no sufficient working area),
746 * we use normal (slow) single halfword accesses */
747 LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
748
749 while (words_remaining > 0) {
750 uint16_t value;
751 memcpy(&value, buffer, sizeof(uint16_t));
752
753 retval = target_write_u16(target, bank->base + offset, value);
754 if (retval != ERROR_OK)
755 goto reset_pg_and_lock;
756
757 retval = stm32x_wait_status_busy(bank, 5);
758 if (retval != ERROR_OK)
759 goto reset_pg_and_lock;
760
761 words_remaining--;
762 buffer += 2;
763 offset += 2;
764 }
765 }
766
767 reset_pg_and_lock:
768 retval2 = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
769 if (retval == ERROR_OK)
770 retval = retval2;
771
772 cleanup:
773 if (new_buffer)
774 free(new_buffer);
775
776 return retval;
777 }
778
779 static int stm32x_get_device_id(struct flash_bank *bank, uint32_t *device_id)
780 {
781 /* This check the device CPUID core register to detect
782 * the M0 from the M3 devices. */
783
784 struct target *target = bank->target;
785 uint32_t cpuid, device_id_register = 0;
786
787 /* Get the CPUID from the ARM Core
788 * http://infocenter.arm.com/help/topic/com.arm.doc.ddi0432c/DDI0432C_cortex_m0_r0p0_trm.pdf 4.2.1 */
789 int retval = target_read_u32(target, 0xE000ED00, &cpuid);
790 if (retval != ERROR_OK)
791 return retval;
792
793 if (((cpuid >> 4) & 0xFFF) == 0xC20) {
794 /* 0xC20 is M0 devices */
795 device_id_register = 0x40015800;
796 } else if (((cpuid >> 4) & 0xFFF) == 0xC23) {
797 /* 0xC23 is M3 devices */
798 device_id_register = 0xE0042000;
799 } else if (((cpuid >> 4) & 0xFFF) == 0xC24) {
800 /* 0xC24 is M4 devices */
801 device_id_register = 0xE0042000;
802 } else {
803 LOG_ERROR("Cannot identify target as a stm32x");
804 return ERROR_FAIL;
805 }
806
807 /* read stm32 device id register */
808 retval = target_read_u32(target, device_id_register, device_id);
809 if (retval != ERROR_OK)
810 return retval;
811
812 return retval;
813 }
814
815 static int stm32x_get_flash_size(struct flash_bank *bank, uint16_t *flash_size_in_kb)
816 {
817 struct target *target = bank->target;
818 uint32_t cpuid, flash_size_reg;
819
820 int retval = target_read_u32(target, 0xE000ED00, &cpuid);
821 if (retval != ERROR_OK)
822 return retval;
823
824 if (((cpuid >> 4) & 0xFFF) == 0xC20) {
825 /* 0xC20 is M0 devices */
826 flash_size_reg = 0x1FFFF7CC;
827 } else if (((cpuid >> 4) & 0xFFF) == 0xC23) {
828 /* 0xC23 is M3 devices */
829 flash_size_reg = 0x1FFFF7E0;
830 } else if (((cpuid >> 4) & 0xFFF) == 0xC24) {
831 /* 0xC24 is M4 devices */
832 flash_size_reg = 0x1FFFF7CC;
833 } else {
834 LOG_ERROR("Cannot identify target as a stm32x");
835 return ERROR_FAIL;
836 }
837
838 retval = target_read_u16(target, flash_size_reg, flash_size_in_kb);
839 if (retval != ERROR_OK)
840 return retval;
841
842 return retval;
843 }
844
845 static int stm32x_probe(struct flash_bank *bank)
846 {
847 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
848 int i;
849 uint16_t flash_size_in_kb;
850 uint16_t max_flash_size_in_kb;
851 uint32_t device_id;
852 int page_size;
853 uint32_t base_address = 0x08000000;
854
855 stm32x_info->probed = 0;
856 stm32x_info->register_base = FLASH_REG_BASE_B0;
857 stm32x_info->user_data_offset = 10;
858 stm32x_info->option_offset = 0;
859
860 /* default factory protection level */
861 stm32x_info->default_rdp = 0x5AA5;
862
863 /* read stm32 device id register */
864 int retval = stm32x_get_device_id(bank, &device_id);
865 if (retval != ERROR_OK)
866 return retval;
867
868 LOG_INFO("device id = 0x%08" PRIx32 "", device_id);
869
870 /* set page size, protection granularity and max flash size depending on family */
871 switch (device_id & 0xfff) {
872 case 0x410: /* medium density */
873 page_size = 1024;
874 stm32x_info->ppage_size = 4;
875 max_flash_size_in_kb = 128;
876 break;
877 case 0x412: /* low density */
878 page_size = 1024;
879 stm32x_info->ppage_size = 4;
880 max_flash_size_in_kb = 32;
881 break;
882 case 0x414: /* high density */
883 page_size = 2048;
884 stm32x_info->ppage_size = 2;
885 max_flash_size_in_kb = 512;
886 break;
887 case 0x418: /* connectivity line density */
888 page_size = 2048;
889 stm32x_info->ppage_size = 2;
890 max_flash_size_in_kb = 256;
891 break;
892 case 0x420: /* value line density */
893 page_size = 1024;
894 stm32x_info->ppage_size = 4;
895 max_flash_size_in_kb = 128;
896 break;
897 case 0x422: /* stm32f302xb/c */
898 page_size = 2048;
899 stm32x_info->ppage_size = 2;
900 max_flash_size_in_kb = 256;
901 stm32x_info->user_data_offset = 16;
902 stm32x_info->option_offset = 6;
903 stm32x_info->default_rdp = 0x55AA;
904 break;
905 case 0x428: /* value line High density */
906 page_size = 2048;
907 stm32x_info->ppage_size = 4;
908 max_flash_size_in_kb = 128;
909 break;
910 case 0x430: /* xl line density (dual flash banks) */
911 page_size = 2048;
912 stm32x_info->ppage_size = 2;
913 max_flash_size_in_kb = 1024;
914 stm32x_info->has_dual_banks = true;
915 break;
916 case 0x432: /* stm32f37x */
917 page_size = 2048;
918 stm32x_info->ppage_size = 2;
919 max_flash_size_in_kb = 256;
920 stm32x_info->user_data_offset = 16;
921 stm32x_info->option_offset = 6;
922 stm32x_info->default_rdp = 0x55AA;
923 break;
924 case 0x438: /* stm32f33x */
925 case 0x439: /* stm32f302x6/8 */
926 page_size = 2048;
927 stm32x_info->ppage_size = 2;
928 max_flash_size_in_kb = 64;
929 stm32x_info->user_data_offset = 16;
930 stm32x_info->option_offset = 6;
931 stm32x_info->default_rdp = 0x55AA;
932 break;
933 case 0x440: /* stm32f05x */
934 case 0x444: /* stm32f03x */
935 case 0x445: /* stm32f04x */
936 page_size = 1024;
937 stm32x_info->ppage_size = 4;
938 max_flash_size_in_kb = 64;
939 stm32x_info->user_data_offset = 16;
940 stm32x_info->option_offset = 6;
941 stm32x_info->default_rdp = 0x55AA;
942 break;
943 case 0x448: /* stm32f07x */
944 case 0x442: /* stm32f09x */
945 page_size = 2048;
946 stm32x_info->ppage_size = 4;
947 max_flash_size_in_kb = 256;
948 stm32x_info->user_data_offset = 16;
949 stm32x_info->option_offset = 6;
950 stm32x_info->default_rdp = 0x55AA;
951 break;
952 default:
953 LOG_WARNING("Cannot identify target as a STM32 family.");
954 return ERROR_FAIL;
955 }
956
957 /* get flash size from target. */
958 retval = stm32x_get_flash_size(bank, &flash_size_in_kb);
959
960 /* failed reading flash size or flash size invalid (early silicon),
961 * default to max target family */
962 if (retval != ERROR_OK || flash_size_in_kb == 0xffff || flash_size_in_kb == 0) {
963 LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming %dk flash",
964 max_flash_size_in_kb);
965 flash_size_in_kb = max_flash_size_in_kb;
966 }
967
968 if (stm32x_info->has_dual_banks) {
969 /* split reported size into matching bank */
970 if (bank->base != 0x08080000) {
971 /* bank 0 will be fixed 512k */
972 flash_size_in_kb = 512;
973 } else {
974 flash_size_in_kb -= 512;
975 /* bank1 also uses a register offset */
976 stm32x_info->register_base = FLASH_REG_BASE_B1;
977 base_address = 0x08080000;
978 }
979 }
980
981 /* if the user sets the size manually then ignore the probed value
982 * this allows us to work around devices that have a invalid flash size register value */
983 if (stm32x_info->user_bank_size) {
984 LOG_INFO("ignoring flash probed value, using configured bank size");
985 flash_size_in_kb = stm32x_info->user_bank_size / 1024;
986 }
987
988 LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
989
990 /* did we assign flash size? */
991 assert(flash_size_in_kb != 0xffff);
992
993 /* calculate numbers of pages */
994 int num_pages = flash_size_in_kb * 1024 / page_size;
995
996 /* check that calculation result makes sense */
997 assert(num_pages > 0);
998
999 if (bank->sectors) {
1000 free(bank->sectors);
1001 bank->sectors = NULL;
1002 }
1003
1004 bank->base = base_address;
1005 bank->size = (num_pages * page_size);
1006 bank->num_sectors = num_pages;
1007 bank->sectors = malloc(sizeof(struct flash_sector) * num_pages);
1008
1009 for (i = 0; i < num_pages; i++) {
1010 bank->sectors[i].offset = i * page_size;
1011 bank->sectors[i].size = page_size;
1012 bank->sectors[i].is_erased = -1;
1013 bank->sectors[i].is_protected = 1;
1014 }
1015
1016 stm32x_info->probed = 1;
1017
1018 return ERROR_OK;
1019 }
1020
1021 static int stm32x_auto_probe(struct flash_bank *bank)
1022 {
1023 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
1024 if (stm32x_info->probed)
1025 return ERROR_OK;
1026 return stm32x_probe(bank);
1027 }
1028
1029 #if 0
1030 COMMAND_HANDLER(stm32x_handle_part_id_command)
1031 {
1032 return ERROR_OK;
1033 }
1034 #endif
1035
1036 static const char *get_stm32f0_revision(uint16_t rev_id)
1037 {
1038 const char *rev_str = NULL;
1039
1040 switch (rev_id) {
1041 case 0x1000:
1042 rev_str = "1.0";
1043 break;
1044 case 0x2000:
1045 rev_str = "2.0";
1046 break;
1047 }
1048 return rev_str;
1049 }
1050
1051 static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
1052 {
1053 uint32_t dbgmcu_idcode;
1054
1055 /* read stm32 device id register */
1056 int retval = stm32x_get_device_id(bank, &dbgmcu_idcode);
1057 if (retval != ERROR_OK)
1058 return retval;
1059
1060 uint16_t device_id = dbgmcu_idcode & 0xfff;
1061 uint16_t rev_id = dbgmcu_idcode >> 16;
1062 const char *device_str;
1063 const char *rev_str = NULL;
1064
1065 switch (device_id) {
1066 case 0x410:
1067 device_str = "STM32F10x (Medium Density)";
1068
1069 switch (rev_id) {
1070 case 0x0000:
1071 rev_str = "A";
1072 break;
1073
1074 case 0x2000:
1075 rev_str = "B";
1076 break;
1077
1078 case 0x2001:
1079 rev_str = "Z";
1080 break;
1081
1082 case 0x2003:
1083 rev_str = "Y";
1084 break;
1085 }
1086 break;
1087
1088 case 0x412:
1089 device_str = "STM32F10x (Low Density)";
1090
1091 switch (rev_id) {
1092 case 0x1000:
1093 rev_str = "A";
1094 break;
1095 }
1096 break;
1097
1098 case 0x414:
1099 device_str = "STM32F10x (High Density)";
1100
1101 switch (rev_id) {
1102 case 0x1000:
1103 rev_str = "A";
1104 break;
1105
1106 case 0x1001:
1107 rev_str = "Z";
1108 break;
1109
1110 case 0x1003:
1111 rev_str = "Y";
1112 break;
1113 }
1114 break;
1115
1116 case 0x418:
1117 device_str = "STM32F10x (Connectivity)";
1118
1119 switch (rev_id) {
1120 case 0x1000:
1121 rev_str = "A";
1122 break;
1123
1124 case 0x1001:
1125 rev_str = "Z";
1126 break;
1127 }
1128 break;
1129
1130 case 0x420:
1131 device_str = "STM32F100 (Low/Medium Density)";
1132
1133 switch (rev_id) {
1134 case 0x1000:
1135 rev_str = "A";
1136 break;
1137
1138 case 0x1001:
1139 rev_str = "Z";
1140 break;
1141 }
1142 break;
1143
1144 case 0x422:
1145 device_str = "STM32F302xB/C";
1146
1147 switch (rev_id) {
1148 case 0x1000:
1149 rev_str = "A";
1150 break;
1151
1152 case 0x1001:
1153 rev_str = "Z";
1154 break;
1155
1156 case 0x1003:
1157 rev_str = "Y";
1158 break;
1159
1160 case 0x2000:
1161 rev_str = "B";
1162 break;
1163 }
1164 break;
1165
1166 case 0x428:
1167 device_str = "STM32F100 (High Density)";
1168
1169 switch (rev_id) {
1170 case 0x1000:
1171 rev_str = "A";
1172 break;
1173
1174 case 0x1001:
1175 rev_str = "Z";
1176 break;
1177 }
1178 break;
1179
1180 case 0x430:
1181 device_str = "STM32F10x (XL Density)";
1182
1183 switch (rev_id) {
1184 case 0x1000:
1185 rev_str = "A";
1186 break;
1187 }
1188 break;
1189
1190 case 0x432:
1191 device_str = "STM32F37x";
1192
1193 switch (rev_id) {
1194 case 0x1000:
1195 rev_str = "A";
1196 break;
1197
1198 case 0x2000:
1199 rev_str = "B";
1200 break;
1201 }
1202 break;
1203
1204 case 0x438:
1205 device_str = "STM32F33x";
1206
1207 switch (rev_id) {
1208 case 0x1000:
1209 rev_str = "A";
1210 break;
1211 }
1212 break;
1213
1214 case 0x439:
1215 device_str = "STM32F302x6/8";
1216
1217 switch (rev_id) {
1218 case 0x1000:
1219 rev_str = "A";
1220 break;
1221
1222 case 0x1001:
1223 rev_str = "Z";
1224 break;
1225 }
1226 break;
1227
1228 case 0x444:
1229 device_str = "STM32F03x";
1230 rev_str = get_stm32f0_revision(rev_id);
1231 break;
1232
1233 case 0x440:
1234 device_str = "STM32F05x";
1235 rev_str = get_stm32f0_revision(rev_id);
1236 break;
1237
1238 case 0x445:
1239 device_str = "STM32F04x";
1240 rev_str = get_stm32f0_revision(rev_id);
1241 break;
1242
1243 case 0x448:
1244 device_str = "STM32F07x";
1245 rev_str = get_stm32f0_revision(rev_id);
1246 break;
1247
1248 case 0x442:
1249 device_str = "STM32F09x";
1250 rev_str = get_stm32f0_revision(rev_id);
1251 break;
1252
1253 default:
1254 snprintf(buf, buf_size, "Cannot identify target as a STM32F0/1/3\n");
1255 return ERROR_FAIL;
1256 }
1257
1258 if (rev_str != NULL)
1259 snprintf(buf, buf_size, "%s - Rev: %s", device_str, rev_str);
1260 else
1261 snprintf(buf, buf_size, "%s - Rev: unknown (0x%04x)", device_str, rev_id);
1262
1263 return ERROR_OK;
1264 }
1265
1266 COMMAND_HANDLER(stm32x_handle_lock_command)
1267 {
1268 struct target *target = NULL;
1269 struct stm32x_flash_bank *stm32x_info = NULL;
1270
1271 if (CMD_ARGC < 1)
1272 return ERROR_COMMAND_SYNTAX_ERROR;
1273
1274 struct flash_bank *bank;
1275 int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1276 if (ERROR_OK != retval)
1277 return retval;
1278
1279 stm32x_info = bank->driver_priv;
1280
1281 target = bank->target;
1282
1283 if (target->state != TARGET_HALTED) {
1284 LOG_ERROR("Target not halted");
1285 return ERROR_TARGET_NOT_HALTED;
1286 }
1287
1288 retval = stm32x_check_operation_supported(bank);
1289 if (ERROR_OK != retval)
1290 return retval;
1291
1292 if (stm32x_erase_options(bank) != ERROR_OK) {
1293 command_print(CMD_CTX, "stm32x failed to erase options");
1294 return ERROR_OK;
1295 }
1296
1297 /* set readout protection */
1298 stm32x_info->option_bytes.RDP = 0;
1299
1300 if (stm32x_write_options(bank) != ERROR_OK) {
1301 command_print(CMD_CTX, "stm32x failed to lock device");
1302 return ERROR_OK;
1303 }
1304
1305 command_print(CMD_CTX, "stm32x locked");
1306
1307 return ERROR_OK;
1308 }
1309
1310 COMMAND_HANDLER(stm32x_handle_unlock_command)
1311 {
1312 struct target *target = NULL;
1313
1314 if (CMD_ARGC < 1)
1315 return ERROR_COMMAND_SYNTAX_ERROR;
1316
1317 struct flash_bank *bank;
1318 int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1319 if (ERROR_OK != retval)
1320 return retval;
1321
1322 target = bank->target;
1323
1324 if (target->state != TARGET_HALTED) {
1325 LOG_ERROR("Target not halted");
1326 return ERROR_TARGET_NOT_HALTED;
1327 }
1328
1329 retval = stm32x_check_operation_supported(bank);
1330 if (ERROR_OK != retval)
1331 return retval;
1332
1333 if (stm32x_erase_options(bank) != ERROR_OK) {
1334 command_print(CMD_CTX, "stm32x failed to unlock device");
1335 return ERROR_OK;
1336 }
1337
1338 if (stm32x_write_options(bank) != ERROR_OK) {
1339 command_print(CMD_CTX, "stm32x failed to lock device");
1340 return ERROR_OK;
1341 }
1342
1343 command_print(CMD_CTX, "stm32x unlocked.\n"
1344 "INFO: a reset or power cycle is required "
1345 "for the new settings to take effect.");
1346
1347 return ERROR_OK;
1348 }
1349
1350 COMMAND_HANDLER(stm32x_handle_options_read_command)
1351 {
1352 uint32_t optionbyte;
1353 struct target *target = NULL;
1354 struct stm32x_flash_bank *stm32x_info = NULL;
1355
1356 if (CMD_ARGC < 1)
1357 return ERROR_COMMAND_SYNTAX_ERROR;
1358
1359 struct flash_bank *bank;
1360 int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1361 if (ERROR_OK != retval)
1362 return retval;
1363
1364 stm32x_info = bank->driver_priv;
1365
1366 target = bank->target;
1367
1368 if (target->state != TARGET_HALTED) {
1369 LOG_ERROR("Target not halted");
1370 return ERROR_TARGET_NOT_HALTED;
1371 }
1372
1373 retval = stm32x_check_operation_supported(bank);
1374 if (ERROR_OK != retval)
1375 return retval;
1376
1377 retval = target_read_u32(target, STM32_FLASH_OBR_B0, &optionbyte);
1378 if (retval != ERROR_OK)
1379 return retval;
1380 command_print(CMD_CTX, "Option Byte: 0x%" PRIx32 "", optionbyte);
1381
1382 int user_data = optionbyte;
1383
1384 if (optionbyte >> OPT_ERROR & 1)
1385 command_print(CMD_CTX, "Option Byte Complement Error");
1386
1387 if (optionbyte >> OPT_READOUT & 1)
1388 command_print(CMD_CTX, "Readout Protection On");
1389 else
1390 command_print(CMD_CTX, "Readout Protection Off");
1391
1392 /* user option bytes are offset depending on variant */
1393 optionbyte >>= stm32x_info->option_offset;
1394
1395 if (optionbyte >> OPT_RDWDGSW & 1)
1396 command_print(CMD_CTX, "Software Watchdog");
1397 else
1398 command_print(CMD_CTX, "Hardware Watchdog");
1399
1400 if (optionbyte >> OPT_RDRSTSTOP & 1)
1401 command_print(CMD_CTX, "Stop: No reset generated");
1402 else
1403 command_print(CMD_CTX, "Stop: Reset generated");
1404
1405 if (optionbyte >> OPT_RDRSTSTDBY & 1)
1406 command_print(CMD_CTX, "Standby: No reset generated");
1407 else
1408 command_print(CMD_CTX, "Standby: Reset generated");
1409
1410 if (stm32x_info->has_dual_banks) {
1411 if (optionbyte >> OPT_BFB2 & 1)
1412 command_print(CMD_CTX, "Boot: Bank 0");
1413 else
1414 command_print(CMD_CTX, "Boot: Bank 1");
1415 }
1416
1417 command_print(CMD_CTX, "User Option0: 0x%02" PRIx8,
1418 (uint8_t)((user_data >> stm32x_info->user_data_offset) & 0xff));
1419 command_print(CMD_CTX, "User Option1: 0x%02" PRIx8,
1420 (uint8_t)((user_data >> (stm32x_info->user_data_offset + 8)) & 0xff));
1421
1422 return ERROR_OK;
1423 }
1424
1425 COMMAND_HANDLER(stm32x_handle_options_write_command)
1426 {
1427 struct target *target = NULL;
1428 struct stm32x_flash_bank *stm32x_info = NULL;
1429 uint16_t optionbyte;
1430
1431 if (CMD_ARGC < 2)
1432 return ERROR_COMMAND_SYNTAX_ERROR;
1433
1434 struct flash_bank *bank;
1435 int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1436 if (ERROR_OK != retval)
1437 return retval;
1438
1439 stm32x_info = bank->driver_priv;
1440
1441 target = bank->target;
1442
1443 if (target->state != TARGET_HALTED) {
1444 LOG_ERROR("Target not halted");
1445 return ERROR_TARGET_NOT_HALTED;
1446 }
1447
1448 retval = stm32x_check_operation_supported(bank);
1449 if (ERROR_OK != retval)
1450 return retval;
1451
1452 retval = stm32x_read_options(bank);
1453 if (ERROR_OK != retval)
1454 return retval;
1455
1456 /* start with current options */
1457 optionbyte = stm32x_info->option_bytes.user_options;
1458
1459 /* skip over flash bank */
1460 CMD_ARGC--;
1461 CMD_ARGV++;
1462
1463 while (CMD_ARGC) {
1464 if (strcmp("SWWDG", CMD_ARGV[0]) == 0)
1465 optionbyte |= (1 << 0);
1466 else if (strcmp("HWWDG", CMD_ARGV[0]) == 0)
1467 optionbyte &= ~(1 << 0);
1468 else if (strcmp("NORSTSTOP", CMD_ARGV[0]) == 0)
1469 optionbyte |= (1 << 1);
1470 else if (strcmp("RSTSTOP", CMD_ARGV[0]) == 0)
1471 optionbyte &= ~(1 << 1);
1472 else if (strcmp("NORSTSTNDBY", CMD_ARGV[0]) == 0)
1473 optionbyte |= (1 << 2);
1474 else if (strcmp("RSTSTNDBY", CMD_ARGV[0]) == 0)
1475 optionbyte &= ~(1 << 2);
1476 else if (stm32x_info->has_dual_banks) {
1477 if (strcmp("BOOT0", CMD_ARGV[0]) == 0)
1478 optionbyte |= (1 << 3);
1479 else if (strcmp("BOOT1", CMD_ARGV[0]) == 0)
1480 optionbyte &= ~(1 << 3);
1481 else
1482 return ERROR_COMMAND_SYNTAX_ERROR;
1483 } else
1484 return ERROR_COMMAND_SYNTAX_ERROR;
1485 CMD_ARGC--;
1486 CMD_ARGV++;
1487 }
1488
1489 if (stm32x_erase_options(bank) != ERROR_OK) {
1490 command_print(CMD_CTX, "stm32x failed to erase options");
1491 return ERROR_OK;
1492 }
1493
1494 stm32x_info->option_bytes.user_options = optionbyte;
1495
1496 if (stm32x_write_options(bank) != ERROR_OK) {
1497 command_print(CMD_CTX, "stm32x failed to write options");
1498 return ERROR_OK;
1499 }
1500
1501 command_print(CMD_CTX, "stm32x write options complete.\n"
1502 "INFO: a reset or power cycle is required "
1503 "for the new settings to take effect.");
1504
1505 return ERROR_OK;
1506 }
1507
1508 static int stm32x_mass_erase(struct flash_bank *bank)
1509 {
1510 struct target *target = bank->target;
1511
1512 if (target->state != TARGET_HALTED) {
1513 LOG_ERROR("Target not halted");
1514 return ERROR_TARGET_NOT_HALTED;
1515 }
1516
1517 /* unlock option flash registers */
1518 int retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY1);
1519 if (retval != ERROR_OK)
1520 return retval;
1521 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY2);
1522 if (retval != ERROR_OK)
1523 return retval;
1524
1525 /* mass erase flash memory */
1526 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_MER);
1527 if (retval != ERROR_OK)
1528 return retval;
1529 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR),
1530 FLASH_MER | FLASH_STRT);
1531 if (retval != ERROR_OK)
1532 return retval;
1533
1534 retval = stm32x_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
1535 if (retval != ERROR_OK)
1536 return retval;
1537
1538 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
1539 if (retval != ERROR_OK)
1540 return retval;
1541
1542 return ERROR_OK;
1543 }
1544
1545 COMMAND_HANDLER(stm32x_handle_mass_erase_command)
1546 {
1547 int i;
1548
1549 if (CMD_ARGC < 1)
1550 return ERROR_COMMAND_SYNTAX_ERROR;
1551
1552 struct flash_bank *bank;
1553 int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1554 if (ERROR_OK != retval)
1555 return retval;
1556
1557 retval = stm32x_mass_erase(bank);
1558 if (retval == ERROR_OK) {
1559 /* set all sectors as erased */
1560 for (i = 0; i < bank->num_sectors; i++)
1561 bank->sectors[i].is_erased = 1;
1562
1563 command_print(CMD_CTX, "stm32x mass erase complete");
1564 } else
1565 command_print(CMD_CTX, "stm32x mass erase failed");
1566
1567 return retval;
1568 }
1569
1570 static const struct command_registration stm32x_exec_command_handlers[] = {
1571 {
1572 .name = "lock",
1573 .handler = stm32x_handle_lock_command,
1574 .mode = COMMAND_EXEC,
1575 .usage = "bank_id",
1576 .help = "Lock entire flash device.",
1577 },
1578 {
1579 .name = "unlock",
1580 .handler = stm32x_handle_unlock_command,
1581 .mode = COMMAND_EXEC,
1582 .usage = "bank_id",
1583 .help = "Unlock entire protected flash device.",
1584 },
1585 {
1586 .name = "mass_erase",
1587 .handler = stm32x_handle_mass_erase_command,
1588 .mode = COMMAND_EXEC,
1589 .usage = "bank_id",
1590 .help = "Erase entire flash device.",
1591 },
1592 {
1593 .name = "options_read",
1594 .handler = stm32x_handle_options_read_command,
1595 .mode = COMMAND_EXEC,
1596 .usage = "bank_id",
1597 .help = "Read and display device option byte.",
1598 },
1599 {
1600 .name = "options_write",
1601 .handler = stm32x_handle_options_write_command,
1602 .mode = COMMAND_EXEC,
1603 .usage = "bank_id ('SWWDG'|'HWWDG') "
1604 "('RSTSTNDBY'|'NORSTSTNDBY') "
1605 "('RSTSTOP'|'NORSTSTOP')",
1606 .help = "Replace bits in device option byte.",
1607 },
1608 COMMAND_REGISTRATION_DONE
1609 };
1610
1611 static const struct command_registration stm32x_command_handlers[] = {
1612 {
1613 .name = "stm32f1x",
1614 .mode = COMMAND_ANY,
1615 .help = "stm32f1x flash command group",
1616 .usage = "",
1617 .chain = stm32x_exec_command_handlers,
1618 },
1619 COMMAND_REGISTRATION_DONE
1620 };
1621
1622 struct flash_driver stm32f1x_flash = {
1623 .name = "stm32f1x",
1624 .commands = stm32x_command_handlers,
1625 .flash_bank_command = stm32x_flash_bank_command,
1626 .erase = stm32x_erase,
1627 .protect = stm32x_protect,
1628 .write = stm32x_write,
1629 .read = default_flash_read,
1630 .probe = stm32x_probe,
1631 .auto_probe = stm32x_auto_probe,
1632 .erase_check = default_flash_blank_check,
1633 .protect_check = stm32x_protect_check,
1634 .info = get_stm32x_info,
1635 };
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)