Code Review / openocd.git / blob
? search:
summary | shortlog | log | commit | commitdiff | review | tree
history | raw | HEAD
flash: fix stm32 failed probe using incorrect flash size
[openocd.git] / src / flash / nor / stm32f1x.c
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * Copyright (C) 2008 by Spencer Oliver *
6 * spen@spen-soft.co.uk *
7 * *
8 * Copyright (C) 2011 by Andreas Fritiofson *
9 * andreas.fritiofson@gmail.com *
10 *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
15 * *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
20 * *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
25 ***************************************************************************/
26
27 #ifdef HAVE_CONFIG_H
28 #include "config.h"
29 #endif
30
31 #include "imp.h"
32 #include <helper/binarybuffer.h>
33 #include <target/algorithm.h>
34 #include <target/armv7m.h>
35
36 /* stm32x register locations */
37
38 #define FLASH_REG_BASE_B0 0x40022000
39 #define FLASH_REG_BASE_B1 0x40022040
40
41 #define STM32_FLASH_ACR 0x00
42 #define STM32_FLASH_KEYR 0x04
43 #define STM32_FLASH_OPTKEYR 0x08
44 #define STM32_FLASH_SR 0x0C
45 #define STM32_FLASH_CR 0x10
46 #define STM32_FLASH_AR 0x14
47 #define STM32_FLASH_OBR 0x1C
48 #define STM32_FLASH_WRPR 0x20
49
50 /* TODO: Check if code using these really should be hard coded to bank 0.
51 * There are valid cases, on dual flash devices the protection of the
52 * second bank is done on the bank0 reg's. */
53 #define STM32_FLASH_ACR_B0 0x40022000
54 #define STM32_FLASH_KEYR_B0 0x40022004
55 #define STM32_FLASH_OPTKEYR_B0 0x40022008
56 #define STM32_FLASH_SR_B0 0x4002200C
57 #define STM32_FLASH_CR_B0 0x40022010
58 #define STM32_FLASH_AR_B0 0x40022014
59 #define STM32_FLASH_OBR_B0 0x4002201C
60 #define STM32_FLASH_WRPR_B0 0x40022020
61
62 /* option byte location */
63
64 #define STM32_OB_RDP 0x1FFFF800
65 #define STM32_OB_USER 0x1FFFF802
66 #define STM32_OB_DATA0 0x1FFFF804
67 #define STM32_OB_DATA1 0x1FFFF806
68 #define STM32_OB_WRP0 0x1FFFF808
69 #define STM32_OB_WRP1 0x1FFFF80A
70 #define STM32_OB_WRP2 0x1FFFF80C
71 #define STM32_OB_WRP3 0x1FFFF80E
72
73 /* FLASH_CR register bits */
74
75 #define FLASH_PG (1 << 0)
76 #define FLASH_PER (1 << 1)
77 #define FLASH_MER (1 << 2)
78 #define FLASH_OPTPG (1 << 4)
79 #define FLASH_OPTER (1 << 5)
80 #define FLASH_STRT (1 << 6)
81 #define FLASH_LOCK (1 << 7)
82 #define FLASH_OPTWRE (1 << 9)
83
84 /* FLASH_SR register bits */
85
86 #define FLASH_BSY (1 << 0)
87 #define FLASH_PGERR (1 << 2)
88 #define FLASH_WRPRTERR (1 << 4)
89 #define FLASH_EOP (1 << 5)
90
91 /* STM32_FLASH_OBR bit definitions (reading) */
92
93 #define OPT_ERROR 0
94 #define OPT_READOUT 1
95 #define OPT_RDWDGSW 2
96 #define OPT_RDRSTSTOP 3
97 #define OPT_RDRSTSTDBY 4
98 #define OPT_BFB2 5 /* dual flash bank only */
99
100 /* register unlock keys */
101
102 #define KEY1 0x45670123
103 #define KEY2 0xCDEF89AB
104
105 /* timeout values */
106
107 #define FLASH_WRITE_TIMEOUT 10
108 #define FLASH_ERASE_TIMEOUT 100
109
110 struct stm32x_options {
111 uint16_t RDP;
112 uint16_t user_options;
113 uint16_t user_data;
114 uint16_t protection[4];
115 };
116
117 struct stm32x_flash_bank {
118 struct stm32x_options option_bytes;
119 int ppage_size;
120 int probed;
121
122 bool has_dual_banks;
123 /* used to access dual flash bank stm32xl */
124 uint32_t register_base;
125 uint16_t default_rdp;
126 int user_data_offset;
127 int option_offset;
128 uint32_t user_bank_size;
129 };
130
131 static int stm32x_mass_erase(struct flash_bank *bank);
132 static int stm32x_get_device_id(struct flash_bank *bank, uint32_t *device_id);
133 static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer,
134 uint32_t offset, uint32_t count);
135
136 /* flash bank stm32x <base> <size> 0 0 <target#>
137 */
138 FLASH_BANK_COMMAND_HANDLER(stm32x_flash_bank_command)
139 {
140 struct stm32x_flash_bank *stm32x_info;
141
142 if (CMD_ARGC < 6)
143 return ERROR_COMMAND_SYNTAX_ERROR;
144
145 stm32x_info = malloc(sizeof(struct stm32x_flash_bank));
146
147 bank->driver_priv = stm32x_info;
148 stm32x_info->probed = 0;
149 stm32x_info->has_dual_banks = false;
150 stm32x_info->register_base = FLASH_REG_BASE_B0;
151 stm32x_info->user_bank_size = bank->size;
152
153 return ERROR_OK;
154 }
155
156 static inline int stm32x_get_flash_reg(struct flash_bank *bank, uint32_t reg)
157 {
158 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
159 return reg + stm32x_info->register_base;
160 }
161
162 static inline int stm32x_get_flash_status(struct flash_bank *bank, uint32_t *status)
163 {
164 struct target *target = bank->target;
165 return target_read_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR), status);
166 }
167
168 static int stm32x_wait_status_busy(struct flash_bank *bank, int timeout)
169 {
170 struct target *target = bank->target;
171 uint32_t status;
172 int retval = ERROR_OK;
173
174 /* wait for busy to clear */
175 for (;;) {
176 retval = stm32x_get_flash_status(bank, &status);
177 if (retval != ERROR_OK)
178 return retval;
179 LOG_DEBUG("status: 0x%" PRIx32 "", status);
180 if ((status & FLASH_BSY) == 0)
181 break;
182 if (timeout-- <= 0) {
183 LOG_ERROR("timed out waiting for flash");
184 return ERROR_FAIL;
185 }
186 alive_sleep(1);
187 }
188
189 if (status & FLASH_WRPRTERR) {
190 LOG_ERROR("stm32x device protected");
191 retval = ERROR_FAIL;
192 }
193
194 if (status & FLASH_PGERR) {
195 LOG_ERROR("stm32x device programming failed");
196 retval = ERROR_FAIL;
197 }
198
199 /* Clear but report errors */
200 if (status & (FLASH_WRPRTERR | FLASH_PGERR)) {
201 /* If this operation fails, we ignore it and report the original
202 * retval
203 */
204 target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR),
205 FLASH_WRPRTERR | FLASH_PGERR);
206 }
207 return retval;
208 }
209
210 static int stm32x_check_operation_supported(struct flash_bank *bank)
211 {
212 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
213
214 /* if we have a dual flash bank device then
215 * we need to perform option byte stuff on bank0 only */
216 if (stm32x_info->register_base != FLASH_REG_BASE_B0) {
217 LOG_ERROR("Option Byte Operation's must use bank0");
218 return ERROR_FLASH_OPERATION_FAILED;
219 }
220
221 return ERROR_OK;
222 }
223
224 static int stm32x_read_options(struct flash_bank *bank)
225 {
226 uint32_t optiondata;
227 struct stm32x_flash_bank *stm32x_info = NULL;
228 struct target *target = bank->target;
229
230 stm32x_info = bank->driver_priv;
231
232 /* read current option bytes */
233 int retval = target_read_u32(target, STM32_FLASH_OBR_B0, &optiondata);
234 if (retval != ERROR_OK)
235 return retval;
236
237 stm32x_info->option_bytes.user_options = (optiondata >> stm32x_info->option_offset >> 2) & 0xffff;
238 stm32x_info->option_bytes.user_data = (optiondata >> stm32x_info->user_data_offset) & 0xffff;
239 stm32x_info->option_bytes.RDP = (optiondata & (1 << OPT_READOUT)) ? 0xFFFF : 0x5AA5;
240
241 if (optiondata & (1 << OPT_READOUT))
242 LOG_INFO("Device Security Bit Set");
243
244 /* each bit refers to a 4bank protection */
245 retval = target_read_u32(target, STM32_FLASH_WRPR_B0, &optiondata);
246 if (retval != ERROR_OK)
247 return retval;
248
249 stm32x_info->option_bytes.protection[0] = (uint16_t)optiondata;
250 stm32x_info->option_bytes.protection[1] = (uint16_t)(optiondata >> 8);
251 stm32x_info->option_bytes.protection[2] = (uint16_t)(optiondata >> 16);
252 stm32x_info->option_bytes.protection[3] = (uint16_t)(optiondata >> 24);
253
254 return ERROR_OK;
255 }
256
257 static int stm32x_erase_options(struct flash_bank *bank)
258 {
259 struct stm32x_flash_bank *stm32x_info = NULL;
260 struct target *target = bank->target;
261
262 stm32x_info = bank->driver_priv;
263
264 /* read current options */
265 stm32x_read_options(bank);
266
267 /* unlock flash registers */
268 int retval = target_write_u32(target, STM32_FLASH_KEYR_B0, KEY1);
269 if (retval != ERROR_OK)
270 return retval;
271
272 retval = target_write_u32(target, STM32_FLASH_KEYR_B0, KEY2);
273 if (retval != ERROR_OK)
274 return retval;
275
276 /* unlock option flash registers */
277 retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY1);
278 if (retval != ERROR_OK)
279 return retval;
280 retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY2);
281 if (retval != ERROR_OK)
282 return retval;
283
284 /* erase option bytes */
285 retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_OPTER | FLASH_OPTWRE);
286 if (retval != ERROR_OK)
287 return retval;
288 retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_OPTER | FLASH_STRT | FLASH_OPTWRE);
289 if (retval != ERROR_OK)
290 return retval;
291
292 retval = stm32x_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
293 if (retval != ERROR_OK)
294 return retval;
295
296 /* clear readout protection and complementary option bytes
297 * this will also force a device unlock if set */
298 stm32x_info->option_bytes.RDP = stm32x_info->default_rdp;
299
300 return ERROR_OK;
301 }
302
303 static int stm32x_write_options(struct flash_bank *bank)
304 {
305 struct stm32x_flash_bank *stm32x_info = NULL;
306 struct target *target = bank->target;
307
308 stm32x_info = bank->driver_priv;
309
310 /* unlock flash registers */
311 int retval = target_write_u32(target, STM32_FLASH_KEYR_B0, KEY1);
312 if (retval != ERROR_OK)
313 return retval;
314 retval = target_write_u32(target, STM32_FLASH_KEYR_B0, KEY2);
315 if (retval != ERROR_OK)
316 return retval;
317
318 /* unlock option flash registers */
319 retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY1);
320 if (retval != ERROR_OK)
321 return retval;
322 retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY2);
323 if (retval != ERROR_OK)
324 return retval;
325
326 /* program option bytes */
327 retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_OPTPG | FLASH_OPTWRE);
328 if (retval != ERROR_OK)
329 return retval;
330
331 uint8_t opt_bytes[16];
332
333 target_buffer_set_u16(target, opt_bytes, stm32x_info->option_bytes.RDP);
334 target_buffer_set_u16(target, opt_bytes + 2, stm32x_info->option_bytes.user_options);
335 target_buffer_set_u16(target, opt_bytes + 4, stm32x_info->option_bytes.user_data & 0xff);
336 target_buffer_set_u16(target, opt_bytes + 6, (stm32x_info->option_bytes.user_data >> 8) & 0xff);
337 target_buffer_set_u16(target, opt_bytes + 8, stm32x_info->option_bytes.protection[0]);
338 target_buffer_set_u16(target, opt_bytes + 10, stm32x_info->option_bytes.protection[1]);
339 target_buffer_set_u16(target, opt_bytes + 12, stm32x_info->option_bytes.protection[2]);
340 target_buffer_set_u16(target, opt_bytes + 14, stm32x_info->option_bytes.protection[3]);
341
342 uint32_t offset = STM32_OB_RDP - bank->base;
343 retval = stm32x_write_block(bank, opt_bytes, offset, sizeof(opt_bytes) / 2);
344 if (retval != ERROR_OK) {
345 if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
346 LOG_ERROR("working area required to erase options bytes");
347 return retval;
348 }
349
350 retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_LOCK);
351 if (retval != ERROR_OK)
352 return retval;
353
354 return ERROR_OK;
355 }
356
357 static int stm32x_protect_check(struct flash_bank *bank)
358 {
359 struct target *target = bank->target;
360 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
361
362 uint32_t protection;
363 int i, s;
364 int num_bits;
365 int set;
366
367 if (target->state != TARGET_HALTED) {
368 LOG_ERROR("Target not halted");
369 return ERROR_TARGET_NOT_HALTED;
370 }
371
372 int retval = stm32x_check_operation_supported(bank);
373 if (ERROR_OK != retval)
374 return retval;
375
376 /* medium density - each bit refers to a 4bank protection
377 * high density - each bit refers to a 2bank protection */
378 retval = target_read_u32(target, STM32_FLASH_WRPR_B0, &protection);
379 if (retval != ERROR_OK)
380 return retval;
381
382 /* medium density - each protection bit is for 4 * 1K pages
383 * high density - each protection bit is for 2 * 2K pages */
384 num_bits = (bank->num_sectors / stm32x_info->ppage_size);
385
386 if (stm32x_info->ppage_size == 2) {
387 /* high density flash/connectivity line protection */
388
389 set = 1;
390
391 if (protection & (1 << 31))
392 set = 0;
393
394 /* bit 31 controls sector 62 - 255 protection for high density
395 * bit 31 controls sector 62 - 127 protection for connectivity line */
396 for (s = 62; s < bank->num_sectors; s++)
397 bank->sectors[s].is_protected = set;
398
399 if (bank->num_sectors > 61)
400 num_bits = 31;
401
402 for (i = 0; i < num_bits; i++) {
403 set = 1;
404
405 if (protection & (1 << i))
406 set = 0;
407
408 for (s = 0; s < stm32x_info->ppage_size; s++)
409 bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set;
410 }
411 } else {
412 /* low/medium density flash protection */
413 for (i = 0; i < num_bits; i++) {
414 set = 1;
415
416 if (protection & (1 << i))
417 set = 0;
418
419 for (s = 0; s < stm32x_info->ppage_size; s++)
420 bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set;
421 }
422 }
423
424 return ERROR_OK;
425 }
426
427 static int stm32x_erase(struct flash_bank *bank, int first, int last)
428 {
429 struct target *target = bank->target;
430 int i;
431
432 if (bank->target->state != TARGET_HALTED) {
433 LOG_ERROR("Target not halted");
434 return ERROR_TARGET_NOT_HALTED;
435 }
436
437 if ((first == 0) && (last == (bank->num_sectors - 1)))
438 return stm32x_mass_erase(bank);
439
440 /* unlock flash registers */
441 int retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY1);
442 if (retval != ERROR_OK)
443 return retval;
444 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY2);
445 if (retval != ERROR_OK)
446 return retval;
447
448 for (i = first; i <= last; i++) {
449 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PER);
450 if (retval != ERROR_OK)
451 return retval;
452 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_AR),
453 bank->base + bank->sectors[i].offset);
454 if (retval != ERROR_OK)
455 return retval;
456 retval = target_write_u32(target,
457 stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PER | FLASH_STRT);
458 if (retval != ERROR_OK)
459 return retval;
460
461 retval = stm32x_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
462 if (retval != ERROR_OK)
463 return retval;
464
465 bank->sectors[i].is_erased = 1;
466 }
467
468 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
469 if (retval != ERROR_OK)
470 return retval;
471
472 return ERROR_OK;
473 }
474
475 static int stm32x_protect(struct flash_bank *bank, int set, int first, int last)
476 {
477 struct stm32x_flash_bank *stm32x_info = NULL;
478 struct target *target = bank->target;
479 uint16_t prot_reg[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF};
480 int i, reg, bit;
481 int status;
482 uint32_t protection;
483
484 stm32x_info = bank->driver_priv;
485
486 if (target->state != TARGET_HALTED) {
487 LOG_ERROR("Target not halted");
488 return ERROR_TARGET_NOT_HALTED;
489 }
490
491 int retval = stm32x_check_operation_supported(bank);
492 if (ERROR_OK != retval)
493 return retval;
494
495 if ((first % stm32x_info->ppage_size) != 0) {
496 LOG_WARNING("aligned start protect sector to a %d sector boundary",
497 stm32x_info->ppage_size);
498 first = first - (first % stm32x_info->ppage_size);
499 }
500 if (((last + 1) % stm32x_info->ppage_size) != 0) {
501 LOG_WARNING("aligned end protect sector to a %d sector boundary",
502 stm32x_info->ppage_size);
503 last++;
504 last = last - (last % stm32x_info->ppage_size);
505 last--;
506 }
507
508 /* medium density - each bit refers to a 4bank protection
509 * high density - each bit refers to a 2bank protection */
510 retval = target_read_u32(target, STM32_FLASH_WRPR_B0, &protection);
511 if (retval != ERROR_OK)
512 return retval;
513
514 prot_reg[0] = (uint16_t)protection;
515 prot_reg[1] = (uint16_t)(protection >> 8);
516 prot_reg[2] = (uint16_t)(protection >> 16);
517 prot_reg[3] = (uint16_t)(protection >> 24);
518
519 if (stm32x_info->ppage_size == 2) {
520 /* high density flash */
521
522 /* bit 7 controls sector 62 - 255 protection */
523 if (last > 61) {
524 if (set)
525 prot_reg[3] &= ~(1 << 7);
526 else
527 prot_reg[3] |= (1 << 7);
528 }
529
530 if (first > 61)
531 first = 62;
532 if (last > 61)
533 last = 61;
534
535 for (i = first; i <= last; i++) {
536 reg = (i / stm32x_info->ppage_size) / 8;
537 bit = (i / stm32x_info->ppage_size) - (reg * 8);
538
539 if (set)
540 prot_reg[reg] &= ~(1 << bit);
541 else
542 prot_reg[reg] |= (1 << bit);
543 }
544 } else {
545 /* medium density flash */
546 for (i = first; i <= last; i++) {
547 reg = (i / stm32x_info->ppage_size) / 8;
548 bit = (i / stm32x_info->ppage_size) - (reg * 8);
549
550 if (set)
551 prot_reg[reg] &= ~(1 << bit);
552 else
553 prot_reg[reg] |= (1 << bit);
554 }
555 }
556
557 status = stm32x_erase_options(bank);
558 if (status != ERROR_OK)
559 return status;
560
561 stm32x_info->option_bytes.protection[0] = prot_reg[0];
562 stm32x_info->option_bytes.protection[1] = prot_reg[1];
563 stm32x_info->option_bytes.protection[2] = prot_reg[2];
564 stm32x_info->option_bytes.protection[3] = prot_reg[3];
565
566 return stm32x_write_options(bank);
567 }
568
569 static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer,
570 uint32_t offset, uint32_t count)
571 {
572 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
573 struct target *target = bank->target;
574 uint32_t buffer_size = 16384;
575 struct working_area *write_algorithm;
576 struct working_area *source;
577 uint32_t address = bank->base + offset;
578 struct reg_param reg_params[5];
579 struct armv7m_algorithm armv7m_info;
580 int retval = ERROR_OK;
581
582 /* see contrib/loaders/flash/stm32f1x.S for src */
583
584 static const uint8_t stm32x_flash_write_code[] = {
585 /* #define STM32_FLASH_SR_OFFSET 0x0C */
586 /* wait_fifo: */
587 0x16, 0x68, /* ldr r6, [r2, #0] */
588 0x00, 0x2e, /* cmp r6, #0 */
589 0x18, 0xd0, /* beq exit */
590 0x55, 0x68, /* ldr r5, [r2, #4] */
591 0xb5, 0x42, /* cmp r5, r6 */
592 0xf9, 0xd0, /* beq wait_fifo */
593 0x2e, 0x88, /* ldrh r6, [r5, #0] */
594 0x26, 0x80, /* strh r6, [r4, #0] */
595 0x02, 0x35, /* adds r5, #2 */
596 0x02, 0x34, /* adds r4, #2 */
597 /* busy: */
598 0xc6, 0x68, /* ldr r6, [r0, #STM32_FLASH_SR_OFFSET] */
599 0x01, 0x27, /* movs r7, #1 */
600 0x3e, 0x42, /* tst r6, r7 */
601 0xfb, 0xd1, /* bne busy */
602 0x14, 0x27, /* movs r7, #0x14 */
603 0x3e, 0x42, /* tst r6, r7 */
604 0x08, 0xd1, /* bne error */
605 0x9d, 0x42, /* cmp r5, r3 */
606 0x01, 0xd3, /* bcc no_wrap */
607 0x15, 0x46, /* mov r5, r2 */
608 0x08, 0x35, /* adds r5, #8 */
609 /* no_wrap: */
610 0x55, 0x60, /* str r5, [r2, #4] */
611 0x01, 0x39, /* subs r1, r1, #1 */
612 0x00, 0x29, /* cmp r1, #0 */
613 0x02, 0xd0, /* beq exit */
614 0xe5, 0xe7, /* b wait_fifo */
615 /* error: */
616 0x00, 0x20, /* movs r0, #0 */
617 0x50, 0x60, /* str r0, [r2, #4] */
618 /* exit: */
619 0x30, 0x46, /* mov r0, r6 */
620 0x00, 0xbe, /* bkpt #0 */
621 };
622
623 /* flash write code */
624 if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code),
625 &write_algorithm) != ERROR_OK) {
626 LOG_WARNING("no working area available, can't do block memory writes");
627 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
628 };
629
630 retval = target_write_buffer(target, write_algorithm->address,
631 sizeof(stm32x_flash_write_code), (uint8_t *)stm32x_flash_write_code);
632 if (retval != ERROR_OK)
633 return retval;
634
635 /* memory buffer */
636 while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
637 buffer_size /= 2;
638 buffer_size &= ~3UL; /* Make sure it's 4 byte aligned */
639 if (buffer_size <= 256) {
640 /* we already allocated the writing code, but failed to get a
641 * buffer, free the algorithm */
642 target_free_working_area(target, write_algorithm);
643
644 LOG_WARNING("no large enough working area available, can't do block memory writes");
645 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
646 }
647 };
648
649 init_reg_param(&reg_params[0], "r0", 32, PARAM_IN_OUT); /* flash base (in), status (out) */
650 init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT); /* count (halfword-16bit) */
651 init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT); /* buffer start */
652 init_reg_param(&reg_params[3], "r3", 32, PARAM_OUT); /* buffer end */
653 init_reg_param(&reg_params[4], "r4", 32, PARAM_IN_OUT); /* target address */
654
655 buf_set_u32(reg_params[0].value, 0, 32, stm32x_info->register_base);
656 buf_set_u32(reg_params[1].value, 0, 32, count);
657 buf_set_u32(reg_params[2].value, 0, 32, source->address);
658 buf_set_u32(reg_params[3].value, 0, 32, source->address + source->size);
659 buf_set_u32(reg_params[4].value, 0, 32, address);
660
661 armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
662 armv7m_info.core_mode = ARM_MODE_THREAD;
663
664 retval = target_run_flash_async_algorithm(target, buffer, count, 2,
665 0, NULL,
666 5, reg_params,
667 source->address, source->size,
668 write_algorithm->address, 0,
669 &armv7m_info);
670
671 if (retval == ERROR_FLASH_OPERATION_FAILED) {
672 LOG_ERROR("flash write failed at address 0x%"PRIx32,
673 buf_get_u32(reg_params[4].value, 0, 32));
674
675 if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_PGERR) {
676 LOG_ERROR("flash memory not erased before writing");
677 /* Clear but report errors */
678 target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR), FLASH_PGERR);
679 }
680
681 if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_WRPRTERR) {
682 LOG_ERROR("flash memory write protected");
683 /* Clear but report errors */
684 target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR), FLASH_WRPRTERR);
685 }
686 }
687
688 target_free_working_area(target, source);
689 target_free_working_area(target, write_algorithm);
690
691 destroy_reg_param(&reg_params[0]);
692 destroy_reg_param(&reg_params[1]);
693 destroy_reg_param(&reg_params[2]);
694 destroy_reg_param(&reg_params[3]);
695 destroy_reg_param(&reg_params[4]);
696
697 return retval;
698 }
699
700 static int stm32x_write(struct flash_bank *bank, uint8_t *buffer,
701 uint32_t offset, uint32_t count)
702 {
703 struct target *target = bank->target;
704 uint8_t *new_buffer = NULL;
705
706 if (bank->target->state != TARGET_HALTED) {
707 LOG_ERROR("Target not halted");
708 return ERROR_TARGET_NOT_HALTED;
709 }
710
711 if (offset & 0x1) {
712 LOG_ERROR("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
713 return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
714 }
715
716 /* If there's an odd number of bytes, the data has to be padded. Duplicate
717 * the buffer and use the normal code path with a single block write since
718 * it's probably cheaper than to special case the last odd write using
719 * discrete accesses. */
720 if (count & 1) {
721 new_buffer = malloc(count + 1);
722 if (new_buffer == NULL) {
723 LOG_ERROR("odd number of bytes to write and no memory for padding buffer");
724 return ERROR_FAIL;
725 }
726 LOG_INFO("odd number of bytes to write, padding with 0xff");
727 buffer = memcpy(new_buffer, buffer, count);
728 buffer[count++] = 0xff;
729 }
730
731 uint32_t words_remaining = count / 2;
732 int retval, retval2;
733
734 /* unlock flash registers */
735 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY1);
736 if (retval != ERROR_OK)
737 goto cleanup;
738 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY2);
739 if (retval != ERROR_OK)
740 goto cleanup;
741
742 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PG);
743 if (retval != ERROR_OK)
744 goto cleanup;
745
746 /* try using a block write */
747 retval = stm32x_write_block(bank, buffer, offset, words_remaining);
748
749 if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
750 /* if block write failed (no sufficient working area),
751 * we use normal (slow) single halfword accesses */
752 LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
753
754 while (words_remaining > 0) {
755 uint16_t value;
756 memcpy(&value, buffer, sizeof(uint16_t));
757
758 retval = target_write_u16(target, bank->base + offset, value);
759 if (retval != ERROR_OK)
760 goto reset_pg_and_lock;
761
762 retval = stm32x_wait_status_busy(bank, 5);
763 if (retval != ERROR_OK)
764 goto reset_pg_and_lock;
765
766 words_remaining--;
767 buffer += 2;
768 offset += 2;
769 }
770 }
771
772 reset_pg_and_lock:
773 retval2 = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
774 if (retval == ERROR_OK)
775 retval = retval2;
776
777 cleanup:
778 if (new_buffer)
779 free(new_buffer);
780
781 return retval;
782 }
783
784 static int stm32x_get_device_id(struct flash_bank *bank, uint32_t *device_id)
785 {
786 /* This check the device CPUID core register to detect
787 * the M0 from the M3 devices. */
788
789 struct target *target = bank->target;
790 uint32_t cpuid, device_id_register = 0;
791
792 /* Get the CPUID from the ARM Core
793 * http://infocenter.arm.com/help/topic/com.arm.doc.ddi0432c/DDI0432C_cortex_m0_r0p0_trm.pdf 4.2.1 */
794 int retval = target_read_u32(target, 0xE000ED00, &cpuid);
795 if (retval != ERROR_OK)
796 return retval;
797
798 if (((cpuid >> 4) & 0xFFF) == 0xC20) {
799 /* 0xC20 is M0 devices */
800 device_id_register = 0x40015800;
801 } else if (((cpuid >> 4) & 0xFFF) == 0xC23) {
802 /* 0xC23 is M3 devices */
803 device_id_register = 0xE0042000;
804 } else if (((cpuid >> 4) & 0xFFF) == 0xC24) {
805 /* 0xC24 is M4 devices */
806 device_id_register = 0xE0042000;
807 } else {
808 LOG_ERROR("Cannot identify target as a stm32x");
809 return ERROR_FAIL;
810 }
811
812 /* read stm32 device id register */
813 retval = target_read_u32(target, device_id_register, device_id);
814 if (retval != ERROR_OK)
815 return retval;
816
817 return retval;
818 }
819
820 static int stm32x_get_flash_size(struct flash_bank *bank, uint16_t *flash_size_in_kb)
821 {
822 struct target *target = bank->target;
823 uint32_t cpuid, flash_size_reg;
824
825 int retval = target_read_u32(target, 0xE000ED00, &cpuid);
826 if (retval != ERROR_OK)
827 return retval;
828
829 if (((cpuid >> 4) & 0xFFF) == 0xC20) {
830 /* 0xC20 is M0 devices */
831 flash_size_reg = 0x1FFFF7CC;
832 } else if (((cpuid >> 4) & 0xFFF) == 0xC23) {
833 /* 0xC23 is M3 devices */
834 flash_size_reg = 0x1FFFF7E0;
835 } else if (((cpuid >> 4) & 0xFFF) == 0xC24) {
836 /* 0xC24 is M4 devices */
837 flash_size_reg = 0x1FFFF7CC;
838 } else {
839 LOG_ERROR("Cannot identify target as a stm32x");
840 return ERROR_FAIL;
841 }
842
843 retval = target_read_u16(target, flash_size_reg, flash_size_in_kb);
844 if (retval != ERROR_OK)
845 return retval;
846
847 return retval;
848 }
849
850 static int stm32x_probe(struct flash_bank *bank)
851 {
852 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
853 int i;
854 uint16_t flash_size_in_kb;
855 uint16_t max_flash_size_in_kb;
856 uint32_t device_id;
857 int page_size;
858 uint32_t base_address = 0x08000000;
859
860 stm32x_info->probed = 0;
861 stm32x_info->register_base = FLASH_REG_BASE_B0;
862 stm32x_info->user_data_offset = 10;
863 stm32x_info->option_offset = 0;
864
865 /* default factory protection level */
866 stm32x_info->default_rdp = 0x5AA5;
867
868 /* read stm32 device id register */
869 int retval = stm32x_get_device_id(bank, &device_id);
870 if (retval != ERROR_OK)
871 return retval;
872
873 LOG_INFO("device id = 0x%08" PRIx32 "", device_id);
874
875 /* set page size, protection granularity and max flash size depending on family */
876 switch (device_id & 0xfff) {
877 case 0x410: /* medium density */
878 page_size = 1024;
879 stm32x_info->ppage_size = 4;
880 max_flash_size_in_kb = 128;
881 break;
882 case 0x412: /* low density */
883 page_size = 1024;
884 stm32x_info->ppage_size = 4;
885 max_flash_size_in_kb = 32;
886 break;
887 case 0x414: /* high density */
888 page_size = 2048;
889 stm32x_info->ppage_size = 2;
890 max_flash_size_in_kb = 512;
891 break;
892 case 0x418: /* connectivity line density */
893 page_size = 2048;
894 stm32x_info->ppage_size = 2;
895 max_flash_size_in_kb = 256;
896 break;
897 case 0x420: /* value line density */
898 page_size = 1024;
899 stm32x_info->ppage_size = 4;
900 max_flash_size_in_kb = 128;
901 break;
902 case 0x422: /* stm32f30x */
903 page_size = 2048;
904 stm32x_info->ppage_size = 2;
905 max_flash_size_in_kb = 256;
906 stm32x_info->user_data_offset = 16;
907 stm32x_info->option_offset = 6;
908 stm32x_info->default_rdp = 0x55AA;
909 break;
910 case 0x428: /* value line High density */
911 page_size = 2048;
912 stm32x_info->ppage_size = 4;
913 max_flash_size_in_kb = 128;
914 break;
915 case 0x430: /* xl line density (dual flash banks) */
916 page_size = 2048;
917 stm32x_info->ppage_size = 2;
918 max_flash_size_in_kb = 1024;
919 stm32x_info->has_dual_banks = true;
920 break;
921 case 0x432: /* stm32f37x */
922 page_size = 2048;
923 stm32x_info->ppage_size = 2;
924 max_flash_size_in_kb = 256;
925 stm32x_info->user_data_offset = 16;
926 stm32x_info->option_offset = 6;
927 stm32x_info->default_rdp = 0x55AA;
928 break;
929 case 0x440: /* stm32f0x */
930 page_size = 1024;
931 stm32x_info->ppage_size = 4;
932 max_flash_size_in_kb = 64;
933 stm32x_info->user_data_offset = 16;
934 stm32x_info->option_offset = 6;
935 stm32x_info->default_rdp = 0x55AA;
936 break;
937 default:
938 LOG_WARNING("Cannot identify target as a STM32 family.");
939 return ERROR_FAIL;
940 }
941
942 /* get flash size from target. */
943 retval = stm32x_get_flash_size(bank, &flash_size_in_kb);
944
945 /* failed reading flash size or flash size invalid (early silicon),
946 * default to max target family */
947 if (retval != ERROR_OK || flash_size_in_kb == 0xffff || flash_size_in_kb == 0) {
948 LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming %dk flash",
949 max_flash_size_in_kb);
950 flash_size_in_kb = max_flash_size_in_kb;
951 }
952
953 if (stm32x_info->has_dual_banks) {
954 /* split reported size into matching bank */
955 if (bank->base != 0x08080000) {
956 /* bank 0 will be fixed 512k */
957 flash_size_in_kb = 512;
958 } else {
959 flash_size_in_kb -= 512;
960 /* bank1 also uses a register offset */
961 stm32x_info->register_base = FLASH_REG_BASE_B1;
962 base_address = 0x08080000;
963 }
964 }
965
966 /* if the user sets the size manually then ignore the probed value
967 * this allows us to work around devices that have a invalid flash size register value */
968 if (stm32x_info->user_bank_size) {
969 LOG_INFO("ignoring flash probed value, using configured bank size");
970 flash_size_in_kb = stm32x_info->user_bank_size / 1024;
971 }
972
973 LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
974
975 /* did we assign flash size? */
976 assert(flash_size_in_kb != 0xffff);
977
978 /* calculate numbers of pages */
979 int num_pages = flash_size_in_kb * 1024 / page_size;
980
981 /* check that calculation result makes sense */
982 assert(num_pages > 0);
983
984 if (bank->sectors) {
985 free(bank->sectors);
986 bank->sectors = NULL;
987 }
988
989 bank->base = base_address;
990 bank->size = (num_pages * page_size);
991 bank->num_sectors = num_pages;
992 bank->sectors = malloc(sizeof(struct flash_sector) * num_pages);
993
994 for (i = 0; i < num_pages; i++) {
995 bank->sectors[i].offset = i * page_size;
996 bank->sectors[i].size = page_size;
997 bank->sectors[i].is_erased = -1;
998 bank->sectors[i].is_protected = 1;
999 }
1000
1001 stm32x_info->probed = 1;
1002
1003 return ERROR_OK;
1004 }
1005
1006 static int stm32x_auto_probe(struct flash_bank *bank)
1007 {
1008 struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
1009 if (stm32x_info->probed)
1010 return ERROR_OK;
1011 return stm32x_probe(bank);
1012 }
1013
1014 #if 0
1015 COMMAND_HANDLER(stm32x_handle_part_id_command)
1016 {
1017 return ERROR_OK;
1018 }
1019 #endif
1020
1021 static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
1022 {
1023 uint32_t device_id;
1024 int printed;
1025
1026 /* read stm32 device id register */
1027 int retval = stm32x_get_device_id(bank, &device_id);
1028 if (retval != ERROR_OK)
1029 return retval;
1030
1031 if ((device_id & 0xfff) == 0x410) {
1032 printed = snprintf(buf, buf_size, "stm32x (Medium Density) - Rev: ");
1033 buf += printed;
1034 buf_size -= printed;
1035
1036 switch (device_id >> 16) {
1037 case 0x0000:
1038 snprintf(buf, buf_size, "A");
1039 break;
1040
1041 case 0x2000:
1042 snprintf(buf, buf_size, "B");
1043 break;
1044
1045 case 0x2001:
1046 snprintf(buf, buf_size, "Z");
1047 break;
1048
1049 case 0x2003:
1050 snprintf(buf, buf_size, "Y");
1051 break;
1052
1053 default:
1054 snprintf(buf, buf_size, "unknown");
1055 break;
1056 }
1057 } else if ((device_id & 0xfff) == 0x412) {
1058 printed = snprintf(buf, buf_size, "stm32x (Low Density) - Rev: ");
1059 buf += printed;
1060 buf_size -= printed;
1061
1062 switch (device_id >> 16) {
1063 case 0x1000:
1064 snprintf(buf, buf_size, "A");
1065 break;
1066
1067 default:
1068 snprintf(buf, buf_size, "unknown");
1069 break;
1070 }
1071 } else if ((device_id & 0xfff) == 0x414) {
1072 printed = snprintf(buf, buf_size, "stm32x (High Density) - Rev: ");
1073 buf += printed;
1074 buf_size -= printed;
1075
1076 switch (device_id >> 16) {
1077 case 0x1000:
1078 snprintf(buf, buf_size, "A");
1079 break;
1080
1081 case 0x1001:
1082 snprintf(buf, buf_size, "Z");
1083 break;
1084
1085 default:
1086 snprintf(buf, buf_size, "unknown");
1087 break;
1088 }
1089 } else if ((device_id & 0xfff) == 0x418) {
1090 printed = snprintf(buf, buf_size, "stm32x (Connectivity) - Rev: ");
1091 buf += printed;
1092 buf_size -= printed;
1093
1094 switch (device_id >> 16) {
1095 case 0x1000:
1096 snprintf(buf, buf_size, "A");
1097 break;
1098
1099 case 0x1001:
1100 snprintf(buf, buf_size, "Z");
1101 break;
1102
1103 default:
1104 snprintf(buf, buf_size, "unknown");
1105 break;
1106 }
1107 } else if ((device_id & 0xfff) == 0x420) {
1108 printed = snprintf(buf, buf_size, "stm32x (Value) - Rev: ");
1109 buf += printed;
1110 buf_size -= printed;
1111
1112 switch (device_id >> 16) {
1113 case 0x1000:
1114 snprintf(buf, buf_size, "A");
1115 break;
1116
1117 case 0x1001:
1118 snprintf(buf, buf_size, "Z");
1119 break;
1120
1121 default:
1122 snprintf(buf, buf_size, "unknown");
1123 break;
1124 }
1125 } else if ((device_id & 0xfff) == 0x422) {
1126 printed = snprintf(buf, buf_size, "stm32f30x - Rev: ");
1127 buf += printed;
1128 buf_size -= printed;
1129
1130 switch (device_id >> 16) {
1131 case 0x1000:
1132 snprintf(buf, buf_size, "A");
1133 break;
1134
1135 case 0x1001:
1136 snprintf(buf, buf_size, "Z");
1137 break;
1138
1139 case 0x2000:
1140 snprintf(buf, buf_size, "B");
1141 break;
1142
1143 default:
1144 snprintf(buf, buf_size, "unknown");
1145 break;
1146 }
1147 } else if ((device_id & 0xfff) == 0x428) {
1148 printed = snprintf(buf, buf_size, "stm32x (Value HD) - Rev: ");
1149 buf += printed;
1150 buf_size -= printed;
1151
1152 switch (device_id >> 16) {
1153 case 0x1000:
1154 snprintf(buf, buf_size, "A");
1155 break;
1156
1157 case 0x1001:
1158 snprintf(buf, buf_size, "Z");
1159 break;
1160
1161 default:
1162 snprintf(buf, buf_size, "unknown");
1163 break;
1164 }
1165 } else if ((device_id & 0xfff) == 0x430) {
1166 printed = snprintf(buf, buf_size, "stm32x (XL) - Rev: ");
1167 buf += printed;
1168 buf_size -= printed;
1169
1170 switch (device_id >> 16) {
1171 case 0x1000:
1172 snprintf(buf, buf_size, "A");
1173 break;
1174
1175 default:
1176 snprintf(buf, buf_size, "unknown");
1177 break;
1178 }
1179 } else if ((device_id & 0xfff) == 0x432) {
1180 printed = snprintf(buf, buf_size, "stm32f37x - Rev: ");
1181 buf += printed;
1182 buf_size -= printed;
1183
1184 switch (device_id >> 16) {
1185 case 0x1000:
1186 snprintf(buf, buf_size, "A");
1187 break;
1188
1189 case 0x2000:
1190 snprintf(buf, buf_size, "B");
1191 break;
1192
1193 default:
1194 snprintf(buf, buf_size, "unknown");
1195 break;
1196 }
1197 } else if ((device_id & 0xfff) == 0x440) {
1198 printed = snprintf(buf, buf_size, "stm32f0x - Rev: ");
1199 buf += printed;
1200 buf_size -= printed;
1201
1202 switch (device_id >> 16) {
1203 case 0x1000:
1204 snprintf(buf, buf_size, "1.0");
1205 break;
1206
1207 case 0x2000:
1208 snprintf(buf, buf_size, "2.0");
1209 break;
1210
1211 default:
1212 snprintf(buf, buf_size, "unknown");
1213 break;
1214 }
1215 } else {
1216 snprintf(buf, buf_size, "Cannot identify target as a stm32x\n");
1217 return ERROR_FAIL;
1218 }
1219
1220 return ERROR_OK;
1221 }
1222
1223 COMMAND_HANDLER(stm32x_handle_lock_command)
1224 {
1225 struct target *target = NULL;
1226 struct stm32x_flash_bank *stm32x_info = NULL;
1227
1228 if (CMD_ARGC < 1)
1229 return ERROR_COMMAND_SYNTAX_ERROR;
1230
1231 struct flash_bank *bank;
1232 int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1233 if (ERROR_OK != retval)
1234 return retval;
1235
1236 stm32x_info = bank->driver_priv;
1237
1238 target = bank->target;
1239
1240 if (target->state != TARGET_HALTED) {
1241 LOG_ERROR("Target not halted");
1242 return ERROR_TARGET_NOT_HALTED;
1243 }
1244
1245 retval = stm32x_check_operation_supported(bank);
1246 if (ERROR_OK != retval)
1247 return retval;
1248
1249 if (stm32x_erase_options(bank) != ERROR_OK) {
1250 command_print(CMD_CTX, "stm32x failed to erase options");
1251 return ERROR_OK;
1252 }
1253
1254 /* set readout protection */
1255 stm32x_info->option_bytes.RDP = 0;
1256
1257 if (stm32x_write_options(bank) != ERROR_OK) {
1258 command_print(CMD_CTX, "stm32x failed to lock device");
1259 return ERROR_OK;
1260 }
1261
1262 command_print(CMD_CTX, "stm32x locked");
1263
1264 return ERROR_OK;
1265 }
1266
1267 COMMAND_HANDLER(stm32x_handle_unlock_command)
1268 {
1269 struct target *target = NULL;
1270
1271 if (CMD_ARGC < 1)
1272 return ERROR_COMMAND_SYNTAX_ERROR;
1273
1274 struct flash_bank *bank;
1275 int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1276 if (ERROR_OK != retval)
1277 return retval;
1278
1279 target = bank->target;
1280
1281 if (target->state != TARGET_HALTED) {
1282 LOG_ERROR("Target not halted");
1283 return ERROR_TARGET_NOT_HALTED;
1284 }
1285
1286 retval = stm32x_check_operation_supported(bank);
1287 if (ERROR_OK != retval)
1288 return retval;
1289
1290 if (stm32x_erase_options(bank) != ERROR_OK) {
1291 command_print(CMD_CTX, "stm32x failed to unlock device");
1292 return ERROR_OK;
1293 }
1294
1295 if (stm32x_write_options(bank) != ERROR_OK) {
1296 command_print(CMD_CTX, "stm32x failed to lock device");
1297 return ERROR_OK;
1298 }
1299
1300 command_print(CMD_CTX, "stm32x unlocked.\n"
1301 "INFO: a reset or power cycle is required "
1302 "for the new settings to take effect.");
1303
1304 return ERROR_OK;
1305 }
1306
1307 COMMAND_HANDLER(stm32x_handle_options_read_command)
1308 {
1309 uint32_t optionbyte;
1310 struct target *target = NULL;
1311 struct stm32x_flash_bank *stm32x_info = NULL;
1312
1313 if (CMD_ARGC < 1)
1314 return ERROR_COMMAND_SYNTAX_ERROR;
1315
1316 struct flash_bank *bank;
1317 int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1318 if (ERROR_OK != retval)
1319 return retval;
1320
1321 stm32x_info = bank->driver_priv;
1322
1323 target = bank->target;
1324
1325 if (target->state != TARGET_HALTED) {
1326 LOG_ERROR("Target not halted");
1327 return ERROR_TARGET_NOT_HALTED;
1328 }
1329
1330 retval = stm32x_check_operation_supported(bank);
1331 if (ERROR_OK != retval)
1332 return retval;
1333
1334 retval = target_read_u32(target, STM32_FLASH_OBR_B0, &optionbyte);
1335 if (retval != ERROR_OK)
1336 return retval;
1337 command_print(CMD_CTX, "Option Byte: 0x%" PRIx32 "", optionbyte);
1338
1339 int user_data = optionbyte;
1340
1341 if (buf_get_u32((uint8_t *)&optionbyte, OPT_ERROR, 1))
1342 command_print(CMD_CTX, "Option Byte Complement Error");
1343
1344 if (buf_get_u32((uint8_t *)&optionbyte, OPT_READOUT, 1))
1345 command_print(CMD_CTX, "Readout Protection On");
1346 else
1347 command_print(CMD_CTX, "Readout Protection Off");
1348
1349 /* user option bytes are offset depending on variant */
1350 optionbyte >>= stm32x_info->option_offset;
1351
1352 if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDWDGSW, 1))
1353 command_print(CMD_CTX, "Software Watchdog");
1354 else
1355 command_print(CMD_CTX, "Hardware Watchdog");
1356
1357 if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDRSTSTOP, 1))
1358 command_print(CMD_CTX, "Stop: No reset generated");
1359 else
1360 command_print(CMD_CTX, "Stop: Reset generated");
1361
1362 if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDRSTSTDBY, 1))
1363 command_print(CMD_CTX, "Standby: No reset generated");
1364 else
1365 command_print(CMD_CTX, "Standby: Reset generated");
1366
1367 if (stm32x_info->has_dual_banks) {
1368 if (buf_get_u32((uint8_t *)&optionbyte, OPT_BFB2, 1))
1369 command_print(CMD_CTX, "Boot: Bank 0");
1370 else
1371 command_print(CMD_CTX, "Boot: Bank 1");
1372 }
1373
1374 command_print(CMD_CTX, "User Option0: 0x%02" PRIx8,
1375 (user_data >> stm32x_info->user_data_offset) & 0xff);
1376 command_print(CMD_CTX, "User Option1: 0x%02" PRIx8,
1377 (user_data >> (stm32x_info->user_data_offset + 8)) & 0xff);
1378
1379 return ERROR_OK;
1380 }
1381
1382 COMMAND_HANDLER(stm32x_handle_options_write_command)
1383 {
1384 struct target *target = NULL;
1385 struct stm32x_flash_bank *stm32x_info = NULL;
1386 uint16_t optionbyte;
1387
1388 if (CMD_ARGC < 2)
1389 return ERROR_COMMAND_SYNTAX_ERROR;
1390
1391 struct flash_bank *bank;
1392 int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1393 if (ERROR_OK != retval)
1394 return retval;
1395
1396 stm32x_info = bank->driver_priv;
1397
1398 target = bank->target;
1399
1400 if (target->state != TARGET_HALTED) {
1401 LOG_ERROR("Target not halted");
1402 return ERROR_TARGET_NOT_HALTED;
1403 }
1404
1405 retval = stm32x_check_operation_supported(bank);
1406 if (ERROR_OK != retval)
1407 return retval;
1408
1409 retval = stm32x_read_options(bank);
1410 if (ERROR_OK != retval)
1411 return retval;
1412
1413 /* start with current options */
1414 optionbyte = stm32x_info->option_bytes.user_options;
1415
1416 /* skip over flash bank */
1417 CMD_ARGC--;
1418 CMD_ARGV++;
1419
1420 while (CMD_ARGC) {
1421 if (strcmp("SWWDG", CMD_ARGV[0]) == 0)
1422 optionbyte |= (1 << 0);
1423 else if (strcmp("HWWDG", CMD_ARGV[0]) == 0)
1424 optionbyte &= ~(1 << 0);
1425 else if (strcmp("NORSTSTOP", CMD_ARGV[0]) == 0)
1426 optionbyte &= ~(1 << 1);
1427 else if (strcmp("RSTSTNDBY", CMD_ARGV[0]) == 0)
1428 optionbyte &= ~(1 << 1);
1429 else if (strcmp("NORSTSTNDBY", CMD_ARGV[0]) == 0)
1430 optionbyte &= ~(1 << 2);
1431 else if (strcmp("RSTSTOP", CMD_ARGV[0]) == 0)
1432 optionbyte &= ~(1 << 2);
1433 else if (stm32x_info->has_dual_banks) {
1434 if (strcmp("BOOT0", CMD_ARGV[0]) == 0)
1435 optionbyte |= (1 << 3);
1436 else if (strcmp("BOOT1", CMD_ARGV[0]) == 0)
1437 optionbyte &= ~(1 << 3);
1438 else
1439 return ERROR_COMMAND_SYNTAX_ERROR;
1440 } else
1441 return ERROR_COMMAND_SYNTAX_ERROR;
1442 CMD_ARGC--;
1443 CMD_ARGV++;
1444 }
1445
1446 if (stm32x_erase_options(bank) != ERROR_OK) {
1447 command_print(CMD_CTX, "stm32x failed to erase options");
1448 return ERROR_OK;
1449 }
1450
1451 stm32x_info->option_bytes.user_options = optionbyte;
1452
1453 if (stm32x_write_options(bank) != ERROR_OK) {
1454 command_print(CMD_CTX, "stm32x failed to write options");
1455 return ERROR_OK;
1456 }
1457
1458 command_print(CMD_CTX, "stm32x write options complete.\n"
1459 "INFO: a reset or power cycle is required "
1460 "for the new settings to take effect.");
1461
1462 return ERROR_OK;
1463 }
1464
1465 static int stm32x_mass_erase(struct flash_bank *bank)
1466 {
1467 struct target *target = bank->target;
1468
1469 if (target->state != TARGET_HALTED) {
1470 LOG_ERROR("Target not halted");
1471 return ERROR_TARGET_NOT_HALTED;
1472 }
1473
1474 /* unlock option flash registers */
1475 int retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY1);
1476 if (retval != ERROR_OK)
1477 return retval;
1478 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY2);
1479 if (retval != ERROR_OK)
1480 return retval;
1481
1482 /* mass erase flash memory */
1483 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_MER);
1484 if (retval != ERROR_OK)
1485 return retval;
1486 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR),
1487 FLASH_MER | FLASH_STRT);
1488 if (retval != ERROR_OK)
1489 return retval;
1490
1491 retval = stm32x_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
1492 if (retval != ERROR_OK)
1493 return retval;
1494
1495 retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
1496 if (retval != ERROR_OK)
1497 return retval;
1498
1499 return ERROR_OK;
1500 }
1501
1502 COMMAND_HANDLER(stm32x_handle_mass_erase_command)
1503 {
1504 int i;
1505
1506 if (CMD_ARGC < 1)
1507 return ERROR_COMMAND_SYNTAX_ERROR;
1508
1509 struct flash_bank *bank;
1510 int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
1511 if (ERROR_OK != retval)
1512 return retval;
1513
1514 retval = stm32x_mass_erase(bank);
1515 if (retval == ERROR_OK) {
1516 /* set all sectors as erased */
1517 for (i = 0; i < bank->num_sectors; i++)
1518 bank->sectors[i].is_erased = 1;
1519
1520 command_print(CMD_CTX, "stm32x mass erase complete");
1521 } else
1522 command_print(CMD_CTX, "stm32x mass erase failed");
1523
1524 return retval;
1525 }
1526
1527 static const struct command_registration stm32x_exec_command_handlers[] = {
1528 {
1529 .name = "lock",
1530 .handler = stm32x_handle_lock_command,
1531 .mode = COMMAND_EXEC,
1532 .usage = "bank_id",
1533 .help = "Lock entire flash device.",
1534 },
1535 {
1536 .name = "unlock",
1537 .handler = stm32x_handle_unlock_command,
1538 .mode = COMMAND_EXEC,
1539 .usage = "bank_id",
1540 .help = "Unlock entire protected flash device.",
1541 },
1542 {
1543 .name = "mass_erase",
1544 .handler = stm32x_handle_mass_erase_command,
1545 .mode = COMMAND_EXEC,
1546 .usage = "bank_id",
1547 .help = "Erase entire flash device.",
1548 },
1549 {
1550 .name = "options_read",
1551 .handler = stm32x_handle_options_read_command,
1552 .mode = COMMAND_EXEC,
1553 .usage = "bank_id",
1554 .help = "Read and display device option byte.",
1555 },
1556 {
1557 .name = "options_write",
1558 .handler = stm32x_handle_options_write_command,
1559 .mode = COMMAND_EXEC,
1560 .usage = "bank_id ('SWWDG'|'HWWDG') "
1561 "('RSTSTNDBY'|'NORSTSTNDBY') "
1562 "('RSTSTOP'|'NORSTSTOP')",
1563 .help = "Replace bits in device option byte.",
1564 },
1565 COMMAND_REGISTRATION_DONE
1566 };
1567
1568 static const struct command_registration stm32x_command_handlers[] = {
1569 {
1570 .name = "stm32f1x",
1571 .mode = COMMAND_ANY,
1572 .help = "stm32f1x flash command group",
1573 .usage = "",
1574 .chain = stm32x_exec_command_handlers,
1575 },
1576 COMMAND_REGISTRATION_DONE
1577 };
1578
1579 struct flash_driver stm32f1x_flash = {
1580 .name = "stm32f1x",
1581 .commands = stm32x_command_handlers,
1582 .flash_bank_command = stm32x_flash_bank_command,
1583 .erase = stm32x_erase,
1584 .protect = stm32x_protect,
1585 .write = stm32x_write,
1586 .read = default_flash_read,
1587 .probe = stm32x_probe,
1588 .auto_probe = stm32x_auto_probe,
1589 .erase_check = default_flash_blank_check,
1590 .protect_check = stm32x_protect_check,
1591 .info = get_stm32x_info,
1592 };
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)