1 /***************************************************************************
2 * Copyright (C) 2013 Synapse Product Development *
3 * Andrey Smirnov <andrew.smironv@gmail.com> *
4 * Angus Gratton <gus@projectgus.com> *
5 * Erdem U. Altunyurt <spamjunkeater@gmail.com> *
7 * This program is free software; you can redistribute it and/or modify *
8 * it under the terms of the GNU General Public License as published by *
9 * the Free Software Foundation; either version 2 of the License, or *
10 * (at your option) any later version. *
12 * This program is distributed in the hope that it will be useful, *
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
15 * GNU General Public License for more details. *
17 * You should have received a copy of the GNU General Public License *
18 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
19 ***************************************************************************/
26 #include <target/algorithm.h>
27 #include <target/armv7m.h>
28 #include <helper/types.h>
29 #include <helper/time_support.h>
31 /* Both those values are constant across the current spectrum ofr nRF5 devices */
32 #define WATCHDOG_REFRESH_REGISTER 0x40010600
33 #define WATCHDOG_REFRESH_VALUE 0x6e524635
36 NRF5_FLASH_BASE
= 0x00000000,
39 enum nrf5_ficr_registers
{
40 NRF5_FICR_BASE
= 0x10000000, /* Factory Information Configuration Registers */
42 #define NRF5_FICR_REG(offset) (NRF5_FICR_BASE + offset)
44 NRF5_FICR_CODEPAGESIZE
= NRF5_FICR_REG(0x010),
45 NRF5_FICR_CODESIZE
= NRF5_FICR_REG(0x014),
47 NRF51_FICR_CLENR0
= NRF5_FICR_REG(0x028),
48 NRF51_FICR_PPFC
= NRF5_FICR_REG(0x02C),
49 NRF51_FICR_NUMRAMBLOCK
= NRF5_FICR_REG(0x034),
50 NRF51_FICR_SIZERAMBLOCK0
= NRF5_FICR_REG(0x038),
51 NRF51_FICR_SIZERAMBLOCK1
= NRF5_FICR_REG(0x03C),
52 NRF51_FICR_SIZERAMBLOCK2
= NRF5_FICR_REG(0x040),
53 NRF51_FICR_SIZERAMBLOCK3
= NRF5_FICR_REG(0x044),
55 NRF5_FICR_CONFIGID
= NRF5_FICR_REG(0x05C),
56 NRF5_FICR_DEVICEID0
= NRF5_FICR_REG(0x060),
57 NRF5_FICR_DEVICEID1
= NRF5_FICR_REG(0x064),
58 NRF5_FICR_ER0
= NRF5_FICR_REG(0x080),
59 NRF5_FICR_ER1
= NRF5_FICR_REG(0x084),
60 NRF5_FICR_ER2
= NRF5_FICR_REG(0x088),
61 NRF5_FICR_ER3
= NRF5_FICR_REG(0x08C),
62 NRF5_FICR_IR0
= NRF5_FICR_REG(0x090),
63 NRF5_FICR_IR1
= NRF5_FICR_REG(0x094),
64 NRF5_FICR_IR2
= NRF5_FICR_REG(0x098),
65 NRF5_FICR_IR3
= NRF5_FICR_REG(0x09C),
66 NRF5_FICR_DEVICEADDRTYPE
= NRF5_FICR_REG(0x0A0),
67 NRF5_FICR_DEVICEADDR0
= NRF5_FICR_REG(0x0A4),
68 NRF5_FICR_DEVICEADDR1
= NRF5_FICR_REG(0x0A8),
70 NRF51_FICR_OVERRIDEN
= NRF5_FICR_REG(0x0AC),
71 NRF51_FICR_NRF_1MBIT0
= NRF5_FICR_REG(0x0B0),
72 NRF51_FICR_NRF_1MBIT1
= NRF5_FICR_REG(0x0B4),
73 NRF51_FICR_NRF_1MBIT2
= NRF5_FICR_REG(0x0B8),
74 NRF51_FICR_NRF_1MBIT3
= NRF5_FICR_REG(0x0BC),
75 NRF51_FICR_NRF_1MBIT4
= NRF5_FICR_REG(0x0C0),
76 NRF51_FICR_BLE_1MBIT0
= NRF5_FICR_REG(0x0EC),
77 NRF51_FICR_BLE_1MBIT1
= NRF5_FICR_REG(0x0F0),
78 NRF51_FICR_BLE_1MBIT2
= NRF5_FICR_REG(0x0F4),
79 NRF51_FICR_BLE_1MBIT3
= NRF5_FICR_REG(0x0F8),
80 NRF51_FICR_BLE_1MBIT4
= NRF5_FICR_REG(0x0FC),
82 /* Following registers are available on nRF52 and on nRF51 since rev 3 */
83 NRF5_FICR_INFO_PART
= NRF5_FICR_REG(0x100),
84 NRF5_FICR_INFO_VARIANT
= NRF5_FICR_REG(0x104),
85 NRF5_FICR_INFO_PACKAGE
= NRF5_FICR_REG(0x108),
86 NRF5_FICR_INFO_RAM
= NRF5_FICR_REG(0x10C),
87 NRF5_FICR_INFO_FLASH
= NRF5_FICR_REG(0x110),
90 enum nrf5_uicr_registers
{
91 NRF5_UICR_BASE
= 0x10001000, /* User Information
92 * Configuration Registers */
94 #define NRF5_UICR_REG(offset) (NRF5_UICR_BASE + offset)
96 NRF51_UICR_CLENR0
= NRF5_UICR_REG(0x000),
97 NRF51_UICR_RBPCONF
= NRF5_UICR_REG(0x004),
98 NRF51_UICR_XTALFREQ
= NRF5_UICR_REG(0x008),
99 NRF51_UICR_FWID
= NRF5_UICR_REG(0x010),
102 enum nrf5_nvmc_registers
{
103 NRF5_NVMC_BASE
= 0x4001E000, /* Non-Volatile Memory
104 * Controller Registers */
106 #define NRF5_NVMC_REG(offset) (NRF5_NVMC_BASE + offset)
108 NRF5_NVMC_READY
= NRF5_NVMC_REG(0x400),
109 NRF5_NVMC_CONFIG
= NRF5_NVMC_REG(0x504),
110 NRF5_NVMC_ERASEPAGE
= NRF5_NVMC_REG(0x508),
111 NRF5_NVMC_ERASEALL
= NRF5_NVMC_REG(0x50C),
112 NRF5_NVMC_ERASEUICR
= NRF5_NVMC_REG(0x514),
114 NRF5_BPROT_BASE
= 0x40000000,
117 enum nrf5_nvmc_config_bits
{
118 NRF5_NVMC_CONFIG_REN
= 0x00,
119 NRF5_NVMC_CONFIG_WEN
= 0x01,
120 NRF5_NVMC_CONFIG_EEN
= 0x02,
124 struct nrf52_ficr_info
{
133 NRF5_FEATURE_SERIES_51
= 1 << 0,
134 NRF5_FEATURE_SERIES_52
= 1 << 1,
135 NRF5_FEATURE_BPROT
= 1 << 2,
136 NRF5_FEATURE_ACL_PROT
= 1 << 3,
139 struct nrf5_device_spec
{
143 const char *build_code
;
144 unsigned int flash_size_kb
;
145 enum nrf5_features features
;
152 struct nrf5_info
*chip
;
155 struct target
*target
;
157 /* chip identification stored in nrf5_probe() for use in nrf5_info() */
158 bool ficr_info_valid
;
159 struct nrf52_ficr_info ficr_info
;
160 const struct nrf5_device_spec
*spec
;
162 enum nrf5_features features
;
163 unsigned int flash_size_kb
;
164 unsigned int ram_size_kb
;
167 #define NRF51_DEVICE_DEF(id, pt, var, bcode, fsize) \
172 .build_code = bcode, \
173 .flash_size_kb = (fsize), \
174 .features = NRF5_FEATURE_SERIES_51, \
177 #define NRF5_DEVICE_DEF(id, pt, var, bcode, fsize, features) \
182 .build_code = bcode, \
183 .flash_size_kb = (fsize), \
184 .features = features, \
187 /* The known devices table below is derived from the "nRF5x series
188 * compatibility matrix" documents, which can be found in the "DocLib" of
191 * https://www.nordicsemi.com/DocLib/Content/Comp_Matrix/nRF51/latest/COMP/nrf51/nRF51422_ic_revision_overview
192 * https://www.nordicsemi.com/DocLib/Content/Comp_Matrix/nRF51/latest/COMP/nrf51/nRF51822_ic_revision_overview
193 * https://www.nordicsemi.com/DocLib/Content/Comp_Matrix/nRF51/latest/COMP/nrf51/nRF51824_ic_revision_overview
194 * https://www.nordicsemi.com/DocLib/Content/Comp_Matrix/nRF52810/latest/COMP/nrf52810/nRF52810_ic_revision_overview
195 * https://www.nordicsemi.com/DocLib/Content/Comp_Matrix/nRF52832/latest/COMP/nrf52832/ic_revision_overview
196 * https://www.nordicsemi.com/DocLib/Content/Comp_Matrix/nRF52840/latest/COMP/nrf52840/nRF52840_ic_revision_overview
198 * Up to date with Matrix v2.0, plus some additional HWIDs.
200 * The additional HWIDs apply where the build code in the matrix is
201 * shown as Gx0, Bx0, etc. In these cases the HWID in the matrix is
202 * for x==0, x!=0 means different (unspecified) HWIDs.
204 static const struct nrf5_device_spec nrf5_known_devices_table
[] = {
205 /* nRF51822 Devices (IC rev 1). */
206 NRF51_DEVICE_DEF(0x001D, "51822", "QFAA", "CA/C0", 256),
207 NRF51_DEVICE_DEF(0x0026, "51822", "QFAB", "AA", 128),
208 NRF51_DEVICE_DEF(0x0027, "51822", "QFAB", "A0", 128),
209 NRF51_DEVICE_DEF(0x0020, "51822", "CEAA", "BA", 256),
210 NRF51_DEVICE_DEF(0x002F, "51822", "CEAA", "B0", 256),
212 /* Some early nRF51-DK (PCA10028) & nRF51-Dongle (PCA10031) boards
213 with built-in jlink seem to use engineering samples not listed
214 in the nRF51 Series Compatibility Matrix V1.0. */
215 NRF51_DEVICE_DEF(0x0071, "51822", "QFAC", "AB", 256),
217 /* nRF51822 Devices (IC rev 2). */
218 NRF51_DEVICE_DEF(0x002A, "51822", "QFAA", "FA0", 256),
219 NRF51_DEVICE_DEF(0x0044, "51822", "QFAA", "GC0", 256),
220 NRF51_DEVICE_DEF(0x003C, "51822", "QFAA", "G0", 256),
221 NRF51_DEVICE_DEF(0x0057, "51822", "QFAA", "G2", 256),
222 NRF51_DEVICE_DEF(0x0058, "51822", "QFAA", "G3", 256),
223 NRF51_DEVICE_DEF(0x004C, "51822", "QFAB", "B0", 128),
224 NRF51_DEVICE_DEF(0x0040, "51822", "CEAA", "CA0", 256),
225 NRF51_DEVICE_DEF(0x0047, "51822", "CEAA", "DA0", 256),
226 NRF51_DEVICE_DEF(0x004D, "51822", "CEAA", "D00", 256),
228 /* nRF51822 Devices (IC rev 3). */
229 NRF51_DEVICE_DEF(0x0072, "51822", "QFAA", "H0", 256),
230 NRF51_DEVICE_DEF(0x00D1, "51822", "QFAA", "H2", 256),
231 NRF51_DEVICE_DEF(0x007B, "51822", "QFAB", "C0", 128),
232 NRF51_DEVICE_DEF(0x0083, "51822", "QFAC", "A0", 256),
233 NRF51_DEVICE_DEF(0x0084, "51822", "QFAC", "A1", 256),
234 NRF51_DEVICE_DEF(0x007D, "51822", "CDAB", "A0", 128),
235 NRF51_DEVICE_DEF(0x0079, "51822", "CEAA", "E0", 256),
236 NRF51_DEVICE_DEF(0x0087, "51822", "CFAC", "A0", 256),
237 NRF51_DEVICE_DEF(0x008F, "51822", "QFAA", "H1", 256),
239 /* nRF51422 Devices (IC rev 1). */
240 NRF51_DEVICE_DEF(0x001E, "51422", "QFAA", "CA", 256),
241 NRF51_DEVICE_DEF(0x0024, "51422", "QFAA", "C0", 256),
242 NRF51_DEVICE_DEF(0x0031, "51422", "CEAA", "A0A", 256),
244 /* nRF51422 Devices (IC rev 2). */
245 NRF51_DEVICE_DEF(0x002D, "51422", "QFAA", "DAA", 256),
246 NRF51_DEVICE_DEF(0x002E, "51422", "QFAA", "E0", 256),
247 NRF51_DEVICE_DEF(0x0061, "51422", "QFAB", "A00", 128),
248 NRF51_DEVICE_DEF(0x0050, "51422", "CEAA", "B0", 256),
250 /* nRF51422 Devices (IC rev 3). */
251 NRF51_DEVICE_DEF(0x0073, "51422", "QFAA", "F0", 256),
252 NRF51_DEVICE_DEF(0x007C, "51422", "QFAB", "B0", 128),
253 NRF51_DEVICE_DEF(0x0085, "51422", "QFAC", "A0", 256),
254 NRF51_DEVICE_DEF(0x0086, "51422", "QFAC", "A1", 256),
255 NRF51_DEVICE_DEF(0x007E, "51422", "CDAB", "A0", 128),
256 NRF51_DEVICE_DEF(0x007A, "51422", "CEAA", "C0", 256),
257 NRF51_DEVICE_DEF(0x0088, "51422", "CFAC", "A0", 256),
259 /* The driver fully autodetects nRF52 series devices by FICR INFO,
260 * no need for nRF52xxx HWIDs in this table */
262 /* nRF52810 Devices */
263 NRF5_DEVICE_DEF(0x0142, "52810", "QFAA", "B0", 192, NRF5_FEATURE_SERIES_52
| NRF5_FEATURE_BPROT
),
264 NRF5_DEVICE_DEF(0x0143, "52810", "QCAA", "C0", 192, NRF5_FEATURE_SERIES_52
| NRF5_FEATURE_BPROT
),
266 /* nRF52832 Devices */
267 NRF5_DEVICE_DEF(0x00C7, "52832", "QFAA", "B0", 512, NRF5_FEATURE_SERIES_52
| NRF5_FEATURE_BPROT
),
268 NRF5_DEVICE_DEF(0x0139, "52832", "QFAA", "E0", 512, NRF5_FEATURE_SERIES_52
| NRF5_FEATURE_BPROT
),
269 NRF5_DEVICE_DEF(0x00E3, "52832", "CIAA", "B0", 512, NRF5_FEATURE_SERIES_52
| NRF5_FEATURE_BPROT
),
271 /* nRF52840 Devices */
272 NRF5_DEVICE_DEF(0x0150, "52840", "QIAA", "C0", 1024, NRF5_FEATURE_SERIES_52
| NRF5_FEATURE_ACL_PROT
),
276 struct nrf5_device_package
{
281 /* Newer devices have FICR INFO.PACKAGE.
282 * This table converts its value to two character code */
283 static const struct nrf5_device_package nrf5_packages_table
[] = {
290 const struct flash_driver nrf5_flash
, nrf51_flash
;
292 static int nrf5_bank_is_probed(struct flash_bank
*bank
)
294 struct nrf5_bank
*nbank
= bank
->driver_priv
;
296 assert(nbank
!= NULL
);
298 return nbank
->probed
;
300 static int nrf5_probe(struct flash_bank
*bank
);
302 static int nrf5_get_probed_chip_if_halted(struct flash_bank
*bank
, struct nrf5_info
**chip
)
304 if (bank
->target
->state
!= TARGET_HALTED
) {
305 LOG_ERROR("Target not halted");
306 return ERROR_TARGET_NOT_HALTED
;
309 struct nrf5_bank
*nbank
= bank
->driver_priv
;
312 int probed
= nrf5_bank_is_probed(bank
);
316 return nrf5_probe(bank
);
321 static int nrf5_wait_for_nvmc(struct nrf5_info
*chip
)
325 int timeout_ms
= 340;
326 int64_t ts_start
= timeval_ms();
329 res
= target_read_u32(chip
->target
, NRF5_NVMC_READY
, &ready
);
330 if (res
!= ERROR_OK
) {
331 LOG_ERROR("Error waiting NVMC_READY: generic flash write/erase error (check protection etc...)");
335 if (ready
== 0x00000001)
340 } while ((timeval_ms()-ts_start
) < timeout_ms
);
342 LOG_DEBUG("Timed out waiting for NVMC_READY");
343 return ERROR_FLASH_BUSY
;
346 static int nrf5_nvmc_erase_enable(struct nrf5_info
*chip
)
349 res
= target_write_u32(chip
->target
,
351 NRF5_NVMC_CONFIG_EEN
);
353 if (res
!= ERROR_OK
) {
354 LOG_ERROR("Failed to enable erase operation");
359 According to NVMC examples in Nordic SDK busy status must be
360 checked after writing to NVMC_CONFIG
362 res
= nrf5_wait_for_nvmc(chip
);
364 LOG_ERROR("Erase enable did not complete");
369 static int nrf5_nvmc_write_enable(struct nrf5_info
*chip
)
372 res
= target_write_u32(chip
->target
,
374 NRF5_NVMC_CONFIG_WEN
);
376 if (res
!= ERROR_OK
) {
377 LOG_ERROR("Failed to enable write operation");
382 According to NVMC examples in Nordic SDK busy status must be
383 checked after writing to NVMC_CONFIG
385 res
= nrf5_wait_for_nvmc(chip
);
387 LOG_ERROR("Write enable did not complete");
392 static int nrf5_nvmc_read_only(struct nrf5_info
*chip
)
395 res
= target_write_u32(chip
->target
,
397 NRF5_NVMC_CONFIG_REN
);
399 if (res
!= ERROR_OK
) {
400 LOG_ERROR("Failed to enable read-only operation");
404 According to NVMC examples in Nordic SDK busy status must be
405 checked after writing to NVMC_CONFIG
407 res
= nrf5_wait_for_nvmc(chip
);
409 LOG_ERROR("Read only enable did not complete");
414 static int nrf5_nvmc_generic_erase(struct nrf5_info
*chip
,
415 uint32_t erase_register
, uint32_t erase_value
)
419 res
= nrf5_nvmc_erase_enable(chip
);
423 res
= target_write_u32(chip
->target
,
429 res
= nrf5_wait_for_nvmc(chip
);
433 return nrf5_nvmc_read_only(chip
);
436 nrf5_nvmc_read_only(chip
);
438 LOG_ERROR("Failed to erase reg: 0x%08"PRIx32
" val: 0x%08"PRIx32
,
439 erase_register
, erase_value
);
443 static int nrf5_protect_check_clenr0(struct flash_bank
*bank
)
447 struct nrf5_bank
*nbank
= bank
->driver_priv
;
448 struct nrf5_info
*chip
= nbank
->chip
;
450 assert(chip
!= NULL
);
452 res
= target_read_u32(chip
->target
, NRF51_FICR_CLENR0
,
454 if (res
!= ERROR_OK
) {
455 LOG_ERROR("Couldn't read code region 0 size[FICR]");
459 if (clenr0
== 0xFFFFFFFF) {
460 res
= target_read_u32(chip
->target
, NRF51_UICR_CLENR0
,
462 if (res
!= ERROR_OK
) {
463 LOG_ERROR("Couldn't read code region 0 size[UICR]");
468 for (unsigned int i
= 0; i
< bank
->num_sectors
; i
++)
469 bank
->sectors
[i
].is_protected
=
470 clenr0
!= 0xFFFFFFFF && bank
->sectors
[i
].offset
< clenr0
;
475 static int nrf5_protect_check_bprot(struct flash_bank
*bank
)
477 struct nrf5_bank
*nbank
= bank
->driver_priv
;
478 struct nrf5_info
*chip
= nbank
->chip
;
480 assert(chip
!= NULL
);
482 static uint32_t nrf5_bprot_offsets
[4] = { 0x600, 0x604, 0x610, 0x614 };
483 uint32_t bprot_reg
= 0;
486 for (unsigned int i
= 0; i
< bank
->num_sectors
; i
++) {
487 unsigned int bit
= i
% 32;
489 unsigned int n_reg
= i
/ 32;
490 if (n_reg
>= ARRAY_SIZE(nrf5_bprot_offsets
))
493 res
= target_read_u32(chip
->target
, NRF5_BPROT_BASE
+ nrf5_bprot_offsets
[n_reg
], &bprot_reg
);
497 bank
->sectors
[i
].is_protected
= (bprot_reg
& (1 << bit
)) ? 1 : 0;
502 static int nrf5_protect_check(struct flash_bank
*bank
)
504 /* UICR cannot be write protected so just return early */
505 if (bank
->base
== NRF5_UICR_BASE
)
508 struct nrf5_bank
*nbank
= bank
->driver_priv
;
509 struct nrf5_info
*chip
= nbank
->chip
;
511 assert(chip
!= NULL
);
513 if (chip
->features
& NRF5_FEATURE_BPROT
)
514 return nrf5_protect_check_bprot(bank
);
516 if (chip
->features
& NRF5_FEATURE_SERIES_51
)
517 return nrf5_protect_check_clenr0(bank
);
519 LOG_WARNING("Flash protection of this nRF device is not supported");
520 return ERROR_FLASH_OPER_UNSUPPORTED
;
523 static int nrf5_protect_clenr0(struct flash_bank
*bank
, int set
, unsigned int first
,
527 uint32_t clenr0
, ppfc
;
528 struct nrf5_bank
*nbank
= bank
->driver_priv
;
529 struct nrf5_info
*chip
= nbank
->chip
;
532 LOG_ERROR("Code region 0 must start at the beginning of the bank");
536 res
= target_read_u32(chip
->target
, NRF51_FICR_PPFC
,
538 if (res
!= ERROR_OK
) {
539 LOG_ERROR("Couldn't read PPFC register");
543 if ((ppfc
& 0xFF) == 0x00) {
544 LOG_ERROR("Code region 0 size was pre-programmed at the factory, can't change flash protection settings");
548 res
= target_read_u32(chip
->target
, NRF51_UICR_CLENR0
,
550 if (res
!= ERROR_OK
) {
551 LOG_ERROR("Couldn't read code region 0 size from UICR");
555 if (!set
|| clenr0
!= 0xFFFFFFFF) {
556 LOG_ERROR("You need to perform chip erase before changing the protection settings");
560 res
= nrf5_nvmc_write_enable(chip
);
564 clenr0
= bank
->sectors
[last
].offset
+ bank
->sectors
[last
].size
;
565 res
= target_write_u32(chip
->target
, NRF51_UICR_CLENR0
, clenr0
);
567 int res2
= nrf5_wait_for_nvmc(chip
);
573 LOG_INFO("A reset or power cycle is required for the new protection settings to take effect.");
575 LOG_ERROR("Couldn't write code region 0 size to UICR");
578 nrf5_nvmc_read_only(chip
);
583 static int nrf5_protect(struct flash_bank
*bank
, int set
, unsigned int first
,
587 struct nrf5_info
*chip
;
589 /* UICR cannot be write protected so just bail out early */
590 if (bank
->base
== NRF5_UICR_BASE
) {
591 LOG_ERROR("UICR page does not support protection");
592 return ERROR_FLASH_OPER_UNSUPPORTED
;
595 res
= nrf5_get_probed_chip_if_halted(bank
, &chip
);
599 if (chip
->features
& NRF5_FEATURE_SERIES_51
)
600 return nrf5_protect_clenr0(bank
, set
, first
, last
);
602 LOG_ERROR("Flash protection setting is not supported on this nRF5 device");
603 return ERROR_FLASH_OPER_UNSUPPORTED
;
606 static bool nrf5_info_variant_to_str(uint32_t variant
, char *bf
)
610 h_u32_to_be(b
, variant
);
611 if (isalnum(b
[0]) && isalnum(b
[1]) && isalnum(b
[2]) && isalnum(b
[3])) {
621 static const char *nrf5_decode_info_package(uint32_t package
)
623 for (size_t i
= 0; i
< ARRAY_SIZE(nrf5_packages_table
); i
++) {
624 if (nrf5_packages_table
[i
].package
== package
)
625 return nrf5_packages_table
[i
].code
;
630 static int nrf5_info(struct flash_bank
*bank
, char *buf
, int buf_size
)
632 struct nrf5_bank
*nbank
= bank
->driver_priv
;
633 struct nrf5_info
*chip
= nbank
->chip
;
637 res
= snprintf(buf
, buf_size
,
638 "nRF%s-%s(build code: %s)",
639 chip
->spec
->part
, chip
->spec
->variant
, chip
->spec
->build_code
);
641 } else if (chip
->ficr_info_valid
) {
643 nrf5_info_variant_to_str(chip
->ficr_info
.variant
, variant
);
644 res
= snprintf(buf
, buf_size
,
645 "nRF%" PRIx32
"-%s%.2s(build code: %s)",
646 chip
->ficr_info
.part
,
647 nrf5_decode_info_package(chip
->ficr_info
.package
),
648 variant
, &variant
[2]);
651 res
= snprintf(buf
, buf_size
, "nRF51xxx (HWID 0x%04" PRIx16
")",
657 snprintf(buf
+ res
, buf_size
- res
, " %ukB Flash, %ukB RAM",
658 chip
->flash_size_kb
, chip
->ram_size_kb
);
662 static int nrf5_read_ficr_info(struct nrf5_info
*chip
)
665 struct target
*target
= chip
->target
;
667 chip
->ficr_info_valid
= false;
669 res
= target_read_u32(target
, NRF5_FICR_INFO_PART
, &chip
->ficr_info
.part
);
670 if (res
!= ERROR_OK
) {
671 LOG_DEBUG("Couldn't read FICR INFO.PART register");
675 uint32_t series
= chip
->ficr_info
.part
& 0xfffff000;
678 chip
->features
= NRF5_FEATURE_SERIES_51
;
682 chip
->features
= NRF5_FEATURE_SERIES_52
;
684 switch (chip
->ficr_info
.part
) {
687 chip
->features
|= NRF5_FEATURE_BPROT
;
691 chip
->features
|= NRF5_FEATURE_ACL_PROT
;
697 LOG_DEBUG("FICR INFO likely not implemented. Invalid PART value 0x%08"
698 PRIx32
, chip
->ficr_info
.part
);
699 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
702 /* Now we know the device has FICR INFO filled by something relevant:
703 * Although it is not documented, the tested nRF51 rev 3 devices
704 * have FICR INFO.PART, RAM and FLASH of the same format as nRF52.
705 * VARIANT and PACKAGE coding is unknown for a nRF51 device.
706 * nRF52 devices have FICR INFO documented and always filled. */
708 res
= target_read_u32(target
, NRF5_FICR_INFO_VARIANT
, &chip
->ficr_info
.variant
);
712 res
= target_read_u32(target
, NRF5_FICR_INFO_PACKAGE
, &chip
->ficr_info
.package
);
716 res
= target_read_u32(target
, NRF5_FICR_INFO_RAM
, &chip
->ficr_info
.ram
);
720 res
= target_read_u32(target
, NRF5_FICR_INFO_FLASH
, &chip
->ficr_info
.flash
);
724 chip
->ficr_info_valid
= true;
728 static int nrf5_get_ram_size(struct target
*target
, uint32_t *ram_size
)
734 uint32_t numramblock
;
735 res
= target_read_u32(target
, NRF51_FICR_NUMRAMBLOCK
, &numramblock
);
736 if (res
!= ERROR_OK
) {
737 LOG_DEBUG("Couldn't read FICR NUMRAMBLOCK register");
741 if (numramblock
< 1 || numramblock
> 4) {
742 LOG_DEBUG("FICR NUMRAMBLOCK strange value %" PRIx32
, numramblock
);
743 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
746 for (unsigned int i
= 0; i
< numramblock
; i
++) {
747 uint32_t sizeramblock
;
748 res
= target_read_u32(target
, NRF51_FICR_SIZERAMBLOCK0
+ sizeof(uint32_t)*i
, &sizeramblock
);
749 if (res
!= ERROR_OK
) {
750 LOG_DEBUG("Couldn't read FICR NUMRAMBLOCK register");
753 if (sizeramblock
< 1024 || sizeramblock
> 65536)
754 LOG_DEBUG("FICR SIZERAMBLOCK strange value %" PRIx32
, sizeramblock
);
756 *ram_size
+= sizeramblock
;
761 static int nrf5_probe(struct flash_bank
*bank
)
764 struct nrf5_bank
*nbank
= bank
->driver_priv
;
765 struct nrf5_info
*chip
= nbank
->chip
;
766 struct target
*target
= chip
->target
;
769 res
= target_read_u32(target
, NRF5_FICR_CONFIGID
, &configid
);
770 if (res
!= ERROR_OK
) {
771 LOG_ERROR("Couldn't read CONFIGID register");
775 /* HWID is stored in the lower two bytes of the CONFIGID register */
776 chip
->hwid
= configid
& 0xFFFF;
778 /* guess a nRF51 series if the device has no FICR INFO and we don't know HWID */
779 chip
->features
= NRF5_FEATURE_SERIES_51
;
781 /* Don't bail out on error for the case that some old engineering
782 * sample has FICR INFO registers unreadable. We can proceed anyway. */
783 (void)nrf5_read_ficr_info(chip
);
786 for (size_t i
= 0; i
< ARRAY_SIZE(nrf5_known_devices_table
); i
++) {
787 if (chip
->hwid
== nrf5_known_devices_table
[i
].hwid
) {
788 chip
->spec
= &nrf5_known_devices_table
[i
];
789 chip
->features
= chip
->spec
->features
;
794 if (chip
->spec
&& chip
->ficr_info_valid
) {
795 /* check if HWID table gives the same part as FICR INFO */
796 if (chip
->ficr_info
.part
!= strtoul(chip
->spec
->part
, NULL
, 16))
797 LOG_WARNING("HWID 0x%04" PRIx32
" mismatch: FICR INFO.PART %"
798 PRIx32
, chip
->hwid
, chip
->ficr_info
.part
);
801 if (chip
->ficr_info_valid
) {
802 chip
->ram_size_kb
= chip
->ficr_info
.ram
;
805 nrf5_get_ram_size(target
, &ram_size
);
806 chip
->ram_size_kb
= ram_size
/ 1024;
809 /* The value stored in NRF5_FICR_CODEPAGESIZE is the number of bytes in one page of FLASH. */
810 uint32_t flash_page_size
;
811 res
= target_read_u32(chip
->target
, NRF5_FICR_CODEPAGESIZE
,
813 if (res
!= ERROR_OK
) {
814 LOG_ERROR("Couldn't read code page size");
818 /* Note the register name is misleading,
819 * NRF5_FICR_CODESIZE is the number of pages in flash memory, not the number of bytes! */
820 uint32_t num_sectors
;
821 res
= target_read_u32(chip
->target
, NRF5_FICR_CODESIZE
, &num_sectors
);
822 if (res
!= ERROR_OK
) {
823 LOG_ERROR("Couldn't read code memory size");
827 chip
->flash_size_kb
= num_sectors
* flash_page_size
/ 1024;
829 if (!chip
->bank
[0].probed
&& !chip
->bank
[1].probed
) {
831 nrf5_info(bank
, buf
, sizeof(buf
));
832 if (!chip
->spec
&& !chip
->ficr_info_valid
) {
833 LOG_INFO("Unknown device: %s", buf
);
841 if (bank
->base
== NRF5_FLASH_BASE
) {
843 if (chip
->spec
&& chip
->flash_size_kb
!= chip
->spec
->flash_size_kb
)
844 LOG_WARNING("Chip's reported Flash capacity does not match expected one");
845 if (chip
->ficr_info_valid
&& chip
->flash_size_kb
!= chip
->ficr_info
.flash
)
846 LOG_WARNING("Chip's reported Flash capacity does not match FICR INFO.FLASH");
848 bank
->num_sectors
= num_sectors
;
849 bank
->size
= num_sectors
* flash_page_size
;
851 bank
->sectors
= alloc_block_array(0, flash_page_size
, num_sectors
);
855 chip
->bank
[0].probed
= true;
858 bank
->num_sectors
= 1;
859 bank
->size
= flash_page_size
;
861 bank
->sectors
= alloc_block_array(0, flash_page_size
, num_sectors
);
865 bank
->sectors
[0].is_protected
= 0;
867 chip
->bank
[1].probed
= true;
873 static int nrf5_auto_probe(struct flash_bank
*bank
)
875 int probed
= nrf5_bank_is_probed(bank
);
882 return nrf5_probe(bank
);
885 static int nrf5_erase_all(struct nrf5_info
*chip
)
887 LOG_DEBUG("Erasing all non-volatile memory");
888 return nrf5_nvmc_generic_erase(chip
,
893 static int nrf5_erase_page(struct flash_bank
*bank
,
894 struct nrf5_info
*chip
,
895 struct flash_sector
*sector
)
899 LOG_DEBUG("Erasing page at 0x%"PRIx32
, sector
->offset
);
901 if (bank
->base
== NRF5_UICR_BASE
) {
902 if (chip
->features
& NRF5_FEATURE_SERIES_51
) {
904 res
= target_read_u32(chip
->target
, NRF51_FICR_PPFC
,
906 if (res
!= ERROR_OK
) {
907 LOG_ERROR("Couldn't read PPFC register");
911 if ((ppfc
& 0xFF) == 0xFF) {
912 /* We can't erase the UICR. Double-check to
913 see if it's already erased before complaining. */
914 default_flash_blank_check(bank
);
915 if (sector
->is_erased
== 1)
918 LOG_ERROR("The chip was not pre-programmed with SoftDevice stack and UICR cannot be erased separately. Please issue mass erase before trying to write to this region");
923 res
= nrf5_nvmc_generic_erase(chip
,
929 res
= nrf5_nvmc_generic_erase(chip
,
937 /* Start a low level flash write for the specified region */
938 static int nrf5_ll_flash_write(struct nrf5_info
*chip
, uint32_t address
, const uint8_t *buffer
, uint32_t bytes
)
940 struct target
*target
= chip
->target
;
941 uint32_t buffer_size
= 8192;
942 struct working_area
*write_algorithm
;
943 struct working_area
*source
;
944 struct reg_param reg_params
[6];
945 struct armv7m_algorithm armv7m_info
;
946 int retval
= ERROR_OK
;
948 static const uint8_t nrf5_flash_write_code
[] = {
949 #include "../../../contrib/loaders/flash/nrf5/nrf5.inc"
952 LOG_DEBUG("Writing buffer to flash address=0x%"PRIx32
" bytes=0x%"PRIx32
, address
, bytes
);
953 assert(bytes
% 4 == 0);
955 /* allocate working area with flash programming code */
956 if (target_alloc_working_area(target
, sizeof(nrf5_flash_write_code
),
957 &write_algorithm
) != ERROR_OK
) {
958 LOG_WARNING("no working area available, falling back to slow memory writes");
960 for (; bytes
> 0; bytes
-= 4) {
961 retval
= target_write_memory(target
, address
, 4, 1, buffer
);
962 if (retval
!= ERROR_OK
)
965 retval
= nrf5_wait_for_nvmc(chip
);
966 if (retval
!= ERROR_OK
)
976 retval
= target_write_buffer(target
, write_algorithm
->address
,
977 sizeof(nrf5_flash_write_code
),
978 nrf5_flash_write_code
);
979 if (retval
!= ERROR_OK
)
983 while (target_alloc_working_area(target
, buffer_size
, &source
) != ERROR_OK
) {
985 buffer_size
&= ~3UL; /* Make sure it's 4 byte aligned */
986 if (buffer_size
<= 256) {
987 /* free working area, write algorithm already allocated */
988 target_free_working_area(target
, write_algorithm
);
990 LOG_WARNING("No large enough working area available, can't do block memory writes");
991 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
995 armv7m_info
.common_magic
= ARMV7M_COMMON_MAGIC
;
996 armv7m_info
.core_mode
= ARM_MODE_THREAD
;
998 init_reg_param(®_params
[0], "r0", 32, PARAM_IN_OUT
); /* byte count */
999 init_reg_param(®_params
[1], "r1", 32, PARAM_OUT
); /* buffer start */
1000 init_reg_param(®_params
[2], "r2", 32, PARAM_OUT
); /* buffer end */
1001 init_reg_param(®_params
[3], "r3", 32, PARAM_IN_OUT
); /* target address */
1002 init_reg_param(®_params
[4], "r6", 32, PARAM_OUT
); /* watchdog refresh value */
1003 init_reg_param(®_params
[5], "r7", 32, PARAM_OUT
); /* watchdog refresh register address */
1005 buf_set_u32(reg_params
[0].value
, 0, 32, bytes
);
1006 buf_set_u32(reg_params
[1].value
, 0, 32, source
->address
);
1007 buf_set_u32(reg_params
[2].value
, 0, 32, source
->address
+ source
->size
);
1008 buf_set_u32(reg_params
[3].value
, 0, 32, address
);
1009 buf_set_u32(reg_params
[4].value
, 0, 32, WATCHDOG_REFRESH_VALUE
);
1010 buf_set_u32(reg_params
[5].value
, 0, 32, WATCHDOG_REFRESH_REGISTER
);
1012 retval
= target_run_flash_async_algorithm(target
, buffer
, bytes
/4, 4,
1014 ARRAY_SIZE(reg_params
), reg_params
,
1015 source
->address
, source
->size
,
1016 write_algorithm
->address
, write_algorithm
->address
+ sizeof(nrf5_flash_write_code
) - 2,
1019 target_free_working_area(target
, source
);
1020 target_free_working_area(target
, write_algorithm
);
1022 destroy_reg_param(®_params
[0]);
1023 destroy_reg_param(®_params
[1]);
1024 destroy_reg_param(®_params
[2]);
1025 destroy_reg_param(®_params
[3]);
1026 destroy_reg_param(®_params
[4]);
1027 destroy_reg_param(®_params
[5]);
1032 static int nrf5_write(struct flash_bank
*bank
, const uint8_t *buffer
,
1033 uint32_t offset
, uint32_t count
)
1035 struct nrf5_info
*chip
;
1037 int res
= nrf5_get_probed_chip_if_halted(bank
, &chip
);
1038 if (res
!= ERROR_OK
)
1041 assert(offset
% 4 == 0);
1042 assert(count
% 4 == 0);
1044 /* UICR CLENR0 based protection used on nRF51 is somewhat clumsy:
1045 * RM reads: Code running from code region 1 will not be able to write
1047 * Unfortunately the flash loader running from RAM can write to both
1048 * code regions whithout any hint the protection is violated.
1050 * Update protection state and check if any flash sector to be written
1052 if (chip
->features
& NRF5_FEATURE_SERIES_51
) {
1054 res
= nrf5_protect_check_clenr0(bank
);
1055 if (res
!= ERROR_OK
)
1058 for (unsigned int sector
= 0; sector
< bank
->num_sectors
; sector
++) {
1059 struct flash_sector
*bs
= &bank
->sectors
[sector
];
1061 /* Start offset in or before this sector? */
1062 /* End offset in or behind this sector? */
1063 if ((offset
< (bs
->offset
+ bs
->size
))
1064 && ((offset
+ count
- 1) >= bs
->offset
)
1065 && bs
->is_protected
== 1) {
1066 LOG_ERROR("Write refused, sector %d is protected", sector
);
1067 return ERROR_FLASH_PROTECTED
;
1072 res
= nrf5_nvmc_write_enable(chip
);
1073 if (res
!= ERROR_OK
)
1076 res
= nrf5_ll_flash_write(chip
, bank
->base
+ offset
, buffer
, count
);
1077 if (res
!= ERROR_OK
)
1080 return nrf5_nvmc_read_only(chip
);
1083 nrf5_nvmc_read_only(chip
);
1084 LOG_ERROR("Failed to write to nrf5 flash");
1088 static int nrf5_erase(struct flash_bank
*bank
, unsigned int first
,
1092 struct nrf5_info
*chip
;
1094 res
= nrf5_get_probed_chip_if_halted(bank
, &chip
);
1095 if (res
!= ERROR_OK
)
1098 /* UICR CLENR0 based protection used on nRF51 prevents erase
1099 * absolutely silently. NVMC has no flag to indicate the protection
1102 * Update protection state and check if any flash sector to be erased
1104 if (chip
->features
& NRF5_FEATURE_SERIES_51
) {
1106 res
= nrf5_protect_check_clenr0(bank
);
1107 if (res
!= ERROR_OK
)
1111 /* For each sector to be erased */
1112 for (unsigned int s
= first
; s
<= last
&& res
== ERROR_OK
; s
++) {
1114 if (chip
->features
& NRF5_FEATURE_SERIES_51
1115 && bank
->sectors
[s
].is_protected
== 1) {
1116 LOG_ERROR("Flash sector %d is protected", s
);
1117 return ERROR_FLASH_PROTECTED
;
1120 res
= nrf5_erase_page(bank
, chip
, &bank
->sectors
[s
]);
1121 if (res
!= ERROR_OK
) {
1122 LOG_ERROR("Error erasing sector %d", s
);
1130 static void nrf5_free_driver_priv(struct flash_bank
*bank
)
1132 struct nrf5_bank
*nbank
= bank
->driver_priv
;
1133 struct nrf5_info
*chip
= nbank
->chip
;
1138 if (chip
->refcount
== 0) {
1140 bank
->driver_priv
= NULL
;
1144 static struct nrf5_info
*nrf5_get_chip(struct target
*target
)
1146 struct flash_bank
*bank_iter
;
1148 /* iterate over nrf5 banks of same target */
1149 for (bank_iter
= flash_bank_list(); bank_iter
; bank_iter
= bank_iter
->next
) {
1150 if (bank_iter
->driver
!= &nrf5_flash
&& bank_iter
->driver
!= &nrf51_flash
)
1153 if (bank_iter
->target
!= target
)
1156 struct nrf5_bank
*nbank
= bank_iter
->driver_priv
;
1166 FLASH_BANK_COMMAND_HANDLER(nrf5_flash_bank_command
)
1168 struct nrf5_info
*chip
;
1169 struct nrf5_bank
*nbank
= NULL
;
1171 switch (bank
->base
) {
1172 case NRF5_FLASH_BASE
:
1173 case NRF5_UICR_BASE
:
1176 LOG_ERROR("Invalid bank address " TARGET_ADDR_FMT
, bank
->base
);
1180 chip
= nrf5_get_chip(bank
->target
);
1182 /* Create a new chip */
1183 chip
= calloc(1, sizeof(*chip
));
1187 chip
->target
= bank
->target
;
1190 switch (bank
->base
) {
1191 case NRF5_FLASH_BASE
:
1192 nbank
= &chip
->bank
[0];
1194 case NRF5_UICR_BASE
:
1195 nbank
= &chip
->bank
[1];
1198 assert(nbank
!= NULL
);
1202 nbank
->probed
= false;
1203 bank
->driver_priv
= nbank
;
1204 bank
->write_start_alignment
= bank
->write_end_alignment
= 4;
1209 COMMAND_HANDLER(nrf5_handle_mass_erase_command
)
1212 struct flash_bank
*bank
= NULL
;
1213 struct target
*target
= get_current_target(CMD_CTX
);
1215 res
= get_flash_bank_by_addr(target
, NRF5_FLASH_BASE
, true, &bank
);
1216 if (res
!= ERROR_OK
)
1219 assert(bank
!= NULL
);
1221 struct nrf5_info
*chip
;
1223 res
= nrf5_get_probed_chip_if_halted(bank
, &chip
);
1224 if (res
!= ERROR_OK
)
1227 if (chip
->features
& NRF5_FEATURE_SERIES_51
) {
1229 res
= target_read_u32(target
, NRF51_FICR_PPFC
,
1231 if (res
!= ERROR_OK
) {
1232 LOG_ERROR("Couldn't read PPFC register");
1236 if ((ppfc
& 0xFF) == 0x00) {
1237 LOG_ERROR("Code region 0 size was pre-programmed at the factory, "
1238 "mass erase command won't work.");
1243 res
= nrf5_erase_all(chip
);
1244 if (res
== ERROR_OK
) {
1245 LOG_INFO("Mass erase completed.");
1246 if (chip
->features
& NRF5_FEATURE_SERIES_51
)
1247 LOG_INFO("A reset or power cycle is required if the flash was protected before.");
1250 LOG_ERROR("Failed to erase the chip");
1256 COMMAND_HANDLER(nrf5_handle_info_command
)
1259 struct flash_bank
*bank
= NULL
;
1260 struct target
*target
= get_current_target(CMD_CTX
);
1262 res
= get_flash_bank_by_addr(target
, NRF5_FLASH_BASE
, true, &bank
);
1263 if (res
!= ERROR_OK
)
1266 assert(bank
!= NULL
);
1268 struct nrf5_info
*chip
;
1270 res
= nrf5_get_probed_chip_if_halted(bank
, &chip
);
1271 if (res
!= ERROR_OK
)
1275 const uint32_t address
;
1278 { .address
= NRF5_FICR_CODEPAGESIZE
},
1279 { .address
= NRF5_FICR_CODESIZE
},
1280 { .address
= NRF51_FICR_CLENR0
},
1281 { .address
= NRF51_FICR_PPFC
},
1282 { .address
= NRF51_FICR_NUMRAMBLOCK
},
1283 { .address
= NRF51_FICR_SIZERAMBLOCK0
},
1284 { .address
= NRF51_FICR_SIZERAMBLOCK1
},
1285 { .address
= NRF51_FICR_SIZERAMBLOCK2
},
1286 { .address
= NRF51_FICR_SIZERAMBLOCK3
},
1287 { .address
= NRF5_FICR_CONFIGID
},
1288 { .address
= NRF5_FICR_DEVICEID0
},
1289 { .address
= NRF5_FICR_DEVICEID1
},
1290 { .address
= NRF5_FICR_ER0
},
1291 { .address
= NRF5_FICR_ER1
},
1292 { .address
= NRF5_FICR_ER2
},
1293 { .address
= NRF5_FICR_ER3
},
1294 { .address
= NRF5_FICR_IR0
},
1295 { .address
= NRF5_FICR_IR1
},
1296 { .address
= NRF5_FICR_IR2
},
1297 { .address
= NRF5_FICR_IR3
},
1298 { .address
= NRF5_FICR_DEVICEADDRTYPE
},
1299 { .address
= NRF5_FICR_DEVICEADDR0
},
1300 { .address
= NRF5_FICR_DEVICEADDR1
},
1301 { .address
= NRF51_FICR_OVERRIDEN
},
1302 { .address
= NRF51_FICR_NRF_1MBIT0
},
1303 { .address
= NRF51_FICR_NRF_1MBIT1
},
1304 { .address
= NRF51_FICR_NRF_1MBIT2
},
1305 { .address
= NRF51_FICR_NRF_1MBIT3
},
1306 { .address
= NRF51_FICR_NRF_1MBIT4
},
1307 { .address
= NRF51_FICR_BLE_1MBIT0
},
1308 { .address
= NRF51_FICR_BLE_1MBIT1
},
1309 { .address
= NRF51_FICR_BLE_1MBIT2
},
1310 { .address
= NRF51_FICR_BLE_1MBIT3
},
1311 { .address
= NRF51_FICR_BLE_1MBIT4
},
1313 { .address
= NRF51_UICR_CLENR0
, },
1314 { .address
= NRF51_UICR_RBPCONF
},
1315 { .address
= NRF51_UICR_XTALFREQ
},
1316 { .address
= NRF51_UICR_FWID
},
1319 for (size_t i
= 0; i
< ARRAY_SIZE(ficr
); i
++) {
1320 res
= target_read_u32(chip
->target
, ficr
[i
].address
,
1322 if (res
!= ERROR_OK
) {
1323 LOG_ERROR("Couldn't read %" PRIx32
, ficr
[i
].address
);
1328 for (size_t i
= 0; i
< ARRAY_SIZE(uicr
); i
++) {
1329 res
= target_read_u32(chip
->target
, uicr
[i
].address
,
1331 if (res
!= ERROR_OK
) {
1332 LOG_ERROR("Couldn't read %" PRIx32
, uicr
[i
].address
);
1338 "\n[factory information control block]\n\n"
1339 "code page size: %"PRIu32
"B\n"
1340 "code memory size: %"PRIu32
"kB\n"
1341 "code region 0 size: %"PRIu32
"kB\n"
1342 "pre-programmed code: %s\n"
1343 "number of ram blocks: %"PRIu32
"\n"
1344 "ram block 0 size: %"PRIu32
"B\n"
1345 "ram block 1 size: %"PRIu32
"B\n"
1346 "ram block 2 size: %"PRIu32
"B\n"
1347 "ram block 3 size: %"PRIu32
"B\n"
1348 "config id: %" PRIx32
"\n"
1349 "device id: 0x%"PRIx32
"%08"PRIx32
"\n"
1350 "encryption root: 0x%08"PRIx32
"%08"PRIx32
"%08"PRIx32
"%08"PRIx32
"\n"
1351 "identity root: 0x%08"PRIx32
"%08"PRIx32
"%08"PRIx32
"%08"PRIx32
"\n"
1352 "device address type: 0x%"PRIx32
"\n"
1353 "device address: 0x%"PRIx32
"%08"PRIx32
"\n"
1354 "override enable: %"PRIx32
"\n"
1355 "NRF_1MBIT values: %"PRIx32
" %"PRIx32
" %"PRIx32
" %"PRIx32
" %"PRIx32
"\n"
1356 "BLE_1MBIT values: %"PRIx32
" %"PRIx32
" %"PRIx32
" %"PRIx32
" %"PRIx32
"\n"
1357 "\n[user information control block]\n\n"
1358 "code region 0 size: %"PRIu32
"kB\n"
1359 "read back protection configuration: %"PRIx32
"\n"
1360 "reset value for XTALFREQ: %"PRIx32
"\n"
1361 "firmware id: 0x%04"PRIx32
,
1363 (ficr
[1].value
* ficr
[0].value
) / 1024,
1364 (ficr
[2].value
== 0xFFFFFFFF) ? 0 : ficr
[2].value
/ 1024,
1365 ((ficr
[3].value
& 0xFF) == 0x00) ? "present" : "not present",
1368 (ficr
[6].value
== 0xFFFFFFFF) ? 0 : ficr
[6].value
,
1369 (ficr
[7].value
== 0xFFFFFFFF) ? 0 : ficr
[7].value
,
1370 (ficr
[8].value
== 0xFFFFFFFF) ? 0 : ficr
[8].value
,
1372 ficr
[10].value
, ficr
[11].value
,
1373 ficr
[12].value
, ficr
[13].value
, ficr
[14].value
, ficr
[15].value
,
1374 ficr
[16].value
, ficr
[17].value
, ficr
[18].value
, ficr
[19].value
,
1376 ficr
[21].value
, ficr
[22].value
,
1378 ficr
[24].value
, ficr
[25].value
, ficr
[26].value
, ficr
[27].value
, ficr
[28].value
,
1379 ficr
[29].value
, ficr
[30].value
, ficr
[31].value
, ficr
[32].value
, ficr
[33].value
,
1380 (uicr
[0].value
== 0xFFFFFFFF) ? 0 : uicr
[0].value
/ 1024,
1381 uicr
[1].value
& 0xFFFF,
1382 uicr
[2].value
& 0xFF,
1383 uicr
[3].value
& 0xFFFF);
1388 static const struct command_registration nrf5_exec_command_handlers
[] = {
1390 .name
= "mass_erase",
1391 .handler
= nrf5_handle_mass_erase_command
,
1392 .mode
= COMMAND_EXEC
,
1393 .help
= "Erase all flash contents of the chip.",
1398 .handler
= nrf5_handle_info_command
,
1399 .mode
= COMMAND_EXEC
,
1400 .help
= "Show FICR and UICR info.",
1403 COMMAND_REGISTRATION_DONE
1406 static const struct command_registration nrf5_command_handlers
[] = {
1409 .mode
= COMMAND_ANY
,
1410 .help
= "nrf5 flash command group",
1412 .chain
= nrf5_exec_command_handlers
,
1416 .mode
= COMMAND_ANY
,
1417 .help
= "nrf51 flash command group",
1419 .chain
= nrf5_exec_command_handlers
,
1421 COMMAND_REGISTRATION_DONE
1424 const struct flash_driver nrf5_flash
= {
1426 .commands
= nrf5_command_handlers
,
1427 .flash_bank_command
= nrf5_flash_bank_command
,
1429 .erase
= nrf5_erase
,
1430 .protect
= nrf5_protect
,
1431 .write
= nrf5_write
,
1432 .read
= default_flash_read
,
1433 .probe
= nrf5_probe
,
1434 .auto_probe
= nrf5_auto_probe
,
1435 .erase_check
= default_flash_blank_check
,
1436 .protect_check
= nrf5_protect_check
,
1437 .free_driver_priv
= nrf5_free_driver_priv
,
1440 /* We need to retain the flash-driver name as well as the commands
1441 * for backwards compatibility */
1442 const struct flash_driver nrf51_flash
= {
1444 .commands
= nrf5_command_handlers
,
1445 .flash_bank_command
= nrf5_flash_bank_command
,
1447 .erase
= nrf5_erase
,
1448 .protect
= nrf5_protect
,
1449 .write
= nrf5_write
,
1450 .read
= default_flash_read
,
1451 .probe
= nrf5_probe
,
1452 .auto_probe
= nrf5_auto_probe
,
1453 .erase_check
= default_flash_blank_check
,
1454 .protect_check
= nrf5_protect_check
,
1455 .free_driver_priv
= nrf5_free_driver_priv
,
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)