flash support (only full erase/write) for 568013 and 568037
[openocd.git] / src / flash / nor / dsp5680xx_flash.c
1 /***************************************************************************
2 * Copyright (C) 2011 by Rodrigo L. Rosa *
3 * rodrigorosa.LG@gmail.com *
4 * *
5 * Based on a file written by: *
6 * Kevin McGuire *
7 * Marcel Wijlaars *
8 * Michael Ashton *
9 * *
10 * This program is free software; you can redistribute it and/or modify *
11 * it under the terms of the GNU General Public License as published by *
12 * the Free Software Foundation; either version 2 of the License, or *
13 * (at your option) any later version. *
14 * *
15 * This program is distributed in the hope that it will be useful, *
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
18 * GNU General Public License for more details. *
19 * *
20 * You should have received a copy of the GNU General Public License *
21 * along with this program; if not, write to the *
22 * Free Software Foundation, Inc., *
23 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
24 ***************************************************************************/
25
26 #ifdef HAVE_CONFIG_H
27 #include "config.h"
28 #endif
29
30 #ifndef DSP5680XX_FLASH_H
31 #define DSP5680XX_FLASH_H
32
33 #include "imp.h"
34 #include <helper/binarybuffer.h>
35 #include <helper/time_support.h>
36 #include <target/algorithm.h>
37 #include <target/dsp5680xx.h>
38
39 struct dsp5680xx_flash_bank {
40 struct working_area *write_algorithm;
41 };
42
43 static int dsp5680xx_build_sector_list(struct flash_bank *bank){
44 //LOG_USER("%s not implemented",__FUNCTION__);
45 //return ERROR_OK;
46
47 // sector size is 512
48 // bank->num_sectors = bank->size / 512; // Bank size is actually 0x2000, but it is set much higher as part of the workaround for byte/word addressing issues.
49 bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
50 int i;
51 for (i = 0; i < bank->num_sectors; ++i){
52 bank->sectors[i].offset = 0;// not implemented.
53 bank->sectors[i].size = HFM_SECTOR_SIZE;
54 //offset += bank->sectors[i].size;
55 bank->sectors[i].is_erased = -1;
56 bank->sectors[i].is_protected = -1;
57 }
58 LOG_USER("%s not tested yet.",__FUNCTION__);
59 return ERROR_OK;
60
61 }
62
63 // flash bank dsp5680xx 0 0 0 0 <target#>
64 FLASH_BANK_COMMAND_HANDLER(dsp5680xx_flash_bank_command){
65 struct dsp5680xx_flash_bank *nbank;
66
67 nbank = malloc(sizeof(struct dsp5680xx_flash_bank));
68
69 bank->base = HFM_FLASH_BASE_ADDR;
70 bank->size = HFM_SIZE; // top 4k not accessible
71 bank->driver_priv = nbank;
72 bank->num_sectors = HFM_SECTOR_COUNT;// This number is anything >0. not really used.
73 dsp5680xx_build_sector_list(bank);
74
75 return ERROR_OK;
76 }
77
78 static int dsp5680xx_flash_protect_check(struct flash_bank *bank){
79 int retval = ERROR_OK;
80 uint8_t protected = 0;
81 if(bank->sectors[0].is_protected == -1){
82 retval = dsp5680xx_f_protect_check(bank->target,&protected);
83 if(retval == ERROR_OK)
84 if(protected)
85 bank->sectors[0].is_protected = 1;
86 else
87 bank->sectors[0].is_protected = 0;
88 else
89 bank->sectors[0].is_protected = -1;
90 }
91 return retval;
92 }
93
94 static int dsp5680xx_flash_protect(struct flash_bank *bank, int set, int first, int last){
95 int retval;
96 if(set){
97 retval = dsp5680xx_f_lock(bank->target);
98 if(retval == ERROR_OK)
99 bank->sectors[0].is_protected = 1;
100 }else{
101 retval = dsp5680xx_f_unlock(bank->target);
102 if(retval == ERROR_OK)
103 bank->sectors[0].is_protected = 0;
104 }
105 return retval;
106 }
107
108 /*
109 static int dsp5680xx_write_block(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count){
110 LOG_USER("%s not implemented",__FUNCTION__);
111 return ERROR_OK;
112 }
113
114 static int dsp5680xx_write_single(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count){
115 LOG_USER("%s not implemented",__FUNCTION__);
116 return ERROR_OK;
117 }
118 */
119
120 //-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
121 //-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
122 // Flash stuff test
123 //-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
124 //-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
125
126 static int dsp5680xx_flash_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count){
127 int retval;
128 if((offset + count/2)>bank->size){
129 LOG_ERROR("%s: Flash bank cannot fit data.",__FUNCTION__);
130 return ERROR_FAIL;
131 }
132 if(offset%2){
133 LOG_ERROR("%s: Writing to odd addresses not supported. This chip uses word addressing, Openocd only supports byte addressing. The workaround results in disabling writing to odd byte addresses.",__FUNCTION__);
134 return ERROR_FAIL;
135 }
136 retval = dsp5680xx_f_wr(bank->target, buffer, bank->base + offset/2, count);
137 if(retval == ERROR_OK)
138 bank->sectors[0].is_erased = 0;
139 else
140 bank->sectors[0].is_erased = -1;
141 return retval;
142 }
143
144 static int dsp5680xx_probe(struct flash_bank *bank){
145 //LOG_USER("%s not implemented",__FUNCTION__);
146 return ERROR_OK;
147 }
148
149 static int dsp5680xx_flash_info(struct flash_bank *bank, char *buf, int buf_size){
150 snprintf(buf, buf_size, "\ndsp5680xx flash driver info:\n - Currently only full erase/lock/unlock are implemented. \n - Call with bank==0 and sector 0 to 0.\n - Protect requires arp_init-reset to complete. \n - Before removing protection the master tap must be selected, and arp_init-reset is required to complete unlocking.");
151 return ERROR_OK;
152 }
153 /*
154 static int dsp5680xx_set_write_enable(struct target *target, int enable){
155 LOG_USER("%s not implemented",__FUNCTION__);
156 return ERROR_OK;
157 }
158
159
160 static int dsp5680xx_check_flash_completion(struct target* target, unsigned int timeout_ms){
161 LOG_USER("%s not implemented",__FUNCTION__);
162 return ERROR_OK;
163 }
164 */
165
166 static int dsp5680xx_flash_erase(struct flash_bank * bank, int first, int last){
167 int retval;
168 retval = dsp5680xx_f_erase(bank->target, (uint32_t) first, (uint32_t) last);
169 if(retval == ERROR_OK)
170 bank->sectors[0].is_erased = 1;
171 else
172 bank->sectors[0].is_erased = -1;
173 return retval;
174 }
175
176 static int dsp5680xx_flash_erase_check(struct flash_bank * bank){
177 int retval = ERROR_OK;
178 uint8_t erased = 0;
179 if(bank->sectors[0].is_erased == -1){
180 retval = dsp5680xx_f_erase_check(bank->target,&erased);
181 if (retval != ERROR_OK){
182 bank->sectors[0].is_erased = -1;
183 }else{
184 if(erased)
185 bank->sectors[0].is_erased = 1;
186 else
187 bank->sectors[0].is_erased = 0;
188 }
189 }
190 return retval;
191 }
192
193 struct flash_driver dsp5680xx_flash = {
194 .name = "dsp5680xx_flash",
195 .flash_bank_command = dsp5680xx_flash_bank_command,
196 .erase = dsp5680xx_flash_erase,
197 .protect = dsp5680xx_flash_protect,
198 .write = dsp5680xx_flash_write,
199 //.read = default_flash_read,
200 //.probe = dsp5680xx_probe,
201 .auto_probe = dsp5680xx_probe,
202 .erase_check = dsp5680xx_flash_erase_check,
203 .protect_check = dsp5680xx_flash_protect_check,
204 .info = dsp5680xx_flash_info
205 };
206 #endif // dsp5680xx_flash.h

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)