c2ea134a393609371be6bfb915476481db8cd24f
[openocd.git] / src / flash / nor / core.c
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath <Dominic.Rath@gmx.de> *
3 * Copyright (C) 2007,2008 Øyvind Harboe <oyvind.harboe@zylin.com> *
4 * Copyright (C) 2008 by Spencer Oliver <spen@spen-soft.co.uk> *
5 * Copyright (C) 2009 Zachary T Welch <zw@superlucidity.net> *
6 * *
7 * This program is free software; you can redistribute it and/or modify *
8 * it under the terms of the GNU General Public License as published by *
9 * the Free Software Foundation; either version 2 of the License, or *
10 * (at your option) any later version. *
11 * *
12 * This program is distributed in the hope that it will be useful, *
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
15 * GNU General Public License for more details. *
16 * *
17 * You should have received a copy of the GNU General Public License *
18 * along with this program; if not, write to the *
19 * Free Software Foundation, Inc., *
20 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
21 ***************************************************************************/
22
23 #ifdef HAVE_CONFIG_H
24 #include <config.h>
25 #endif
26 #include <flash/common.h>
27 #include <flash/nor/core.h>
28 #include <flash/nor/imp.h>
29 #include <target/image.h>
30
31
32 struct flash_bank *flash_banks;
33
34 int flash_driver_erase(struct flash_bank *bank, int first, int last)
35 {
36 int retval;
37
38 retval = bank->driver->erase(bank, first, last);
39 if (retval != ERROR_OK)
40 {
41 LOG_ERROR("failed erasing sectors %d to %d (%d)", first, last, retval);
42 }
43
44 return retval;
45 }
46
47 int flash_driver_protect(struct flash_bank *bank, int set, int first, int last)
48 {
49 int retval;
50
51 retval = bank->driver->protect(bank, set, first, last);
52 if (retval != ERROR_OK)
53 {
54 LOG_ERROR("failed setting protection for areas %d to %d (%d)", first, last, retval);
55 }
56
57 return retval;
58 }
59
60 int flash_driver_write(struct flash_bank *bank,
61 uint8_t *buffer, uint32_t offset, uint32_t count)
62 {
63 int retval;
64
65 retval = bank->driver->write(bank, buffer, offset, count);
66 if (retval != ERROR_OK)
67 {
68 LOG_ERROR("error writing to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32 " (%d)",
69 bank->base, offset, retval);
70 }
71
72 return retval;
73 }
74
75 void flash_bank_add(struct flash_bank *bank)
76 {
77 /* put flash bank in linked list */
78 unsigned bank_num = 0;
79 if (flash_banks)
80 {
81 /* find last flash bank */
82 struct flash_bank *p = flash_banks;
83 while (NULL != p->next)
84 {
85 bank_num += 1;
86 p = p->next;
87 }
88 p->next = bank;
89 bank_num += 1;
90 }
91 else
92 flash_banks = bank;
93
94 bank->bank_number = bank_num;
95 }
96
97 struct flash_bank *flash_bank_list(void)
98 {
99 return flash_banks;
100 }
101
102 struct flash_bank *get_flash_bank_by_num_noprobe(int num)
103 {
104 struct flash_bank *p;
105 int i = 0;
106
107 for (p = flash_banks; p; p = p->next)
108 {
109 if (i++ == num)
110 {
111 return p;
112 }
113 }
114 LOG_ERROR("flash bank %d does not exist", num);
115 return NULL;
116 }
117
118 int flash_get_bank_count(void)
119 {
120 struct flash_bank *p;
121 int i = 0;
122 for (p = flash_banks; p; p = p->next)
123 {
124 i++;
125 }
126 return i;
127 }
128
129 struct flash_bank *get_flash_bank_by_name(const char *name)
130 {
131 unsigned requested = get_flash_name_index(name);
132 unsigned found = 0;
133
134 struct flash_bank *bank;
135 for (bank = flash_banks; NULL != bank; bank = bank->next)
136 {
137 if (strcmp(bank->name, name) == 0)
138 return bank;
139 if (!flash_driver_name_matches(bank->driver->name, name))
140 continue;
141 if (++found < requested)
142 continue;
143 return bank;
144 }
145 return NULL;
146 }
147
148 struct flash_bank *get_flash_bank_by_num(int num)
149 {
150 struct flash_bank *p = get_flash_bank_by_num_noprobe(num);
151 int retval;
152
153 if (p == NULL)
154 return NULL;
155
156 retval = p->driver->auto_probe(p);
157
158 if (retval != ERROR_OK)
159 {
160 LOG_ERROR("auto_probe failed %d\n", retval);
161 return NULL;
162 }
163 return p;
164 }
165
166 /* lookup flash bank by address */
167 struct flash_bank *get_flash_bank_by_addr(struct target *target, uint32_t addr)
168 {
169 struct flash_bank *c;
170
171 /* cycle through bank list */
172 for (c = flash_banks; c; c = c->next)
173 {
174 int retval;
175 retval = c->driver->auto_probe(c);
176
177 if (retval != ERROR_OK)
178 {
179 LOG_ERROR("auto_probe failed %d\n", retval);
180 return NULL;
181 }
182 /* check whether address belongs to this flash bank */
183 if ((addr >= c->base) && (addr <= c->base + (c->size - 1)) && target == c->target)
184 return c;
185 }
186 LOG_ERROR("No flash at address 0x%08" PRIx32 "\n", addr);
187 return NULL;
188 }
189
190 int default_flash_mem_blank_check(struct flash_bank *bank)
191 {
192 struct target *target = bank->target;
193 const int buffer_size = 1024;
194 int i;
195 uint32_t nBytes;
196 int retval = ERROR_OK;
197
198 if (bank->target->state != TARGET_HALTED)
199 {
200 LOG_ERROR("Target not halted");
201 return ERROR_TARGET_NOT_HALTED;
202 }
203
204 uint8_t *buffer = malloc(buffer_size);
205
206 for (i = 0; i < bank->num_sectors; i++)
207 {
208 uint32_t j;
209 bank->sectors[i].is_erased = 1;
210
211 for (j = 0; j < bank->sectors[i].size; j += buffer_size)
212 {
213 uint32_t chunk;
214 chunk = buffer_size;
215 if (chunk > (j - bank->sectors[i].size))
216 {
217 chunk = (j - bank->sectors[i].size);
218 }
219
220 retval = target_read_memory(target, bank->base + bank->sectors[i].offset + j, 4, chunk/4, buffer);
221 if (retval != ERROR_OK)
222 {
223 goto done;
224 }
225
226 for (nBytes = 0; nBytes < chunk; nBytes++)
227 {
228 if (buffer[nBytes] != 0xFF)
229 {
230 bank->sectors[i].is_erased = 0;
231 break;
232 }
233 }
234 }
235 }
236
237 done:
238 free(buffer);
239
240 return retval;
241 }
242
243 int default_flash_blank_check(struct flash_bank *bank)
244 {
245 struct target *target = bank->target;
246 int i;
247 int retval;
248 int fast_check = 0;
249 uint32_t blank;
250
251 if (bank->target->state != TARGET_HALTED)
252 {
253 LOG_ERROR("Target not halted");
254 return ERROR_TARGET_NOT_HALTED;
255 }
256
257 for (i = 0; i < bank->num_sectors; i++)
258 {
259 uint32_t address = bank->base + bank->sectors[i].offset;
260 uint32_t size = bank->sectors[i].size;
261
262 if ((retval = target_blank_check_memory(target, address, size, &blank)) != ERROR_OK)
263 {
264 fast_check = 0;
265 break;
266 }
267 if (blank == 0xFF)
268 bank->sectors[i].is_erased = 1;
269 else
270 bank->sectors[i].is_erased = 0;
271 fast_check = 1;
272 }
273
274 if (!fast_check)
275 {
276 LOG_USER("Running slow fallback erase check - add working memory");
277 return default_flash_mem_blank_check(bank);
278 }
279
280 return ERROR_OK;
281 }
282 /* erase given flash region, selects proper bank according to target and address */
283 static int flash_iterate_address_range(struct target *target, uint32_t addr, uint32_t length,
284 int (*callback)(struct flash_bank *bank, int first, int last))
285 {
286 struct flash_bank *c;
287 int first = -1;
288 int last = -1;
289 int i;
290
291 if ((c = get_flash_bank_by_addr(target, addr)) == NULL)
292 return ERROR_FLASH_DST_OUT_OF_BANK; /* no corresponding bank found */
293
294 if (c->size == 0 || c->num_sectors == 0)
295 {
296 LOG_ERROR("Bank is invalid");
297 return ERROR_FLASH_BANK_INVALID;
298 }
299
300 if (length == 0)
301 {
302 /* special case, erase whole bank when length is zero */
303 if (addr != c->base)
304 return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
305
306 return callback(c, 0, c->num_sectors - 1);
307 }
308
309 /* check whether it fits */
310 if (addr + length - 1 > c->base + c->size - 1)
311 return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
312
313 addr -= c->base;
314
315 for (i = 0; i < c->num_sectors; i++)
316 {
317 /* check whether sector overlaps with the given range and is not yet erased */
318 if (addr < c->sectors[i].offset + c->sectors[i].size && addr + length > c->sectors[i].offset && c->sectors[i].is_erased != 1) {
319 /* if first is not set yet then this is the first sector */
320 if (first == -1)
321 first = i;
322 last = i; /* and it is the last one so far in any case */
323 }
324 }
325
326 if (first == -1 || last == -1)
327 return ERROR_OK;
328
329 return callback(c, first, last);
330 }
331
332 int flash_erase_address_range(struct target *target, uint32_t addr, uint32_t length)
333 {
334 return flash_iterate_address_range(target,
335 addr, length, &flash_driver_erase);
336 }
337
338 static int flash_driver_unprotect(struct flash_bank *bank, int first, int last)
339 {
340 return flash_driver_protect(bank, 0, first, last);
341 }
342
343 static int flash_unlock_address_range(struct target *target, uint32_t addr, uint32_t length)
344 {
345 return flash_iterate_address_range(target,
346 addr, length, &flash_driver_unprotect);
347 }
348
349 int flash_write_unlock(struct target *target, struct image *image,
350 uint32_t *written, int erase, bool unlock)
351 {
352 int retval = ERROR_OK;
353
354 int section;
355 uint32_t section_offset;
356 struct flash_bank *c;
357 int *padding;
358
359 section = 0;
360 section_offset = 0;
361
362 if (written)
363 *written = 0;
364
365 if (erase)
366 {
367 /* assume all sectors need erasing - stops any problems
368 * when flash_write is called multiple times */
369
370 flash_set_dirty();
371 }
372
373 /* allocate padding array */
374 padding = malloc(image->num_sections * sizeof(padding));
375
376 /* loop until we reach end of the image */
377 while (section < image->num_sections)
378 {
379 uint32_t buffer_size;
380 uint8_t *buffer;
381 int section_first;
382 int section_last;
383 uint32_t run_address = image->sections[section].base_address + section_offset;
384 uint32_t run_size = image->sections[section].size - section_offset;
385 int pad_bytes = 0;
386
387 if (image->sections[section].size == 0)
388 {
389 LOG_WARNING("empty section %d", section);
390 section++;
391 section_offset = 0;
392 continue;
393 }
394
395 /* find the corresponding flash bank */
396 if ((c = get_flash_bank_by_addr(target, run_address)) == NULL)
397 {
398 section++; /* and skip it */
399 section_offset = 0;
400 continue;
401 }
402
403 /* collect consecutive sections which fall into the same bank */
404 section_first = section;
405 section_last = section;
406 padding[section] = 0;
407 while ((run_address + run_size - 1 < c->base + c->size - 1)
408 && (section_last + 1 < image->num_sections))
409 {
410 if (image->sections[section_last + 1].base_address < (run_address + run_size))
411 {
412 LOG_DEBUG("section %d out of order(very slightly surprising, but supported)", section_last + 1);
413 break;
414 }
415 /* if we have multiple sections within our image, flash programming could fail due to alignment issues
416 * attempt to rebuild a consecutive buffer for the flash loader */
417 pad_bytes = (image->sections[section_last + 1].base_address) - (run_address + run_size);
418 if ((run_address + run_size + pad_bytes) > (c->base + c->size))
419 break;
420 padding[section_last] = pad_bytes;
421 run_size += image->sections[++section_last].size;
422 run_size += pad_bytes;
423 padding[section_last] = 0;
424
425 LOG_INFO("Padding image section %d with %d bytes", section_last-1, pad_bytes);
426 }
427
428 /* fit the run into bank constraints */
429 if (run_address + run_size - 1 > c->base + c->size - 1)
430 {
431 LOG_WARNING("writing %d bytes only - as image section is %d bytes and bank is only %d bytes", \
432 (int)(c->base + c->size - run_address), (int)(run_size), (int)(c->size));
433 run_size = c->base + c->size - run_address;
434 }
435
436 /* allocate buffer */
437 buffer = malloc(run_size);
438 buffer_size = 0;
439
440 /* read sections to the buffer */
441 while (buffer_size < run_size)
442 {
443 size_t size_read;
444
445 size_read = run_size - buffer_size;
446 if (size_read > image->sections[section].size - section_offset)
447 size_read = image->sections[section].size - section_offset;
448
449 if ((retval = image_read_section(image, section, section_offset,
450 size_read, buffer + buffer_size, &size_read)) != ERROR_OK || size_read == 0)
451 {
452 free(buffer);
453 free(padding);
454 return retval;
455 }
456
457 /* see if we need to pad the section */
458 while (padding[section]--)
459 (buffer + buffer_size)[size_read++] = 0xff;
460
461 buffer_size += size_read;
462 section_offset += size_read;
463
464 if (section_offset >= image->sections[section].size)
465 {
466 section++;
467 section_offset = 0;
468 }
469 }
470
471 retval = ERROR_OK;
472
473 if (unlock)
474 {
475 retval = flash_unlock_address_range(target, run_address, run_size);
476 }
477 if (retval == ERROR_OK)
478 {
479 if (erase)
480 {
481 /* calculate and erase sectors */
482 retval = flash_erase_address_range(target, run_address, run_size);
483 }
484 }
485
486 if (retval == ERROR_OK)
487 {
488 /* write flash sectors */
489 retval = flash_driver_write(c, buffer, run_address - c->base, run_size);
490 }
491
492 free(buffer);
493
494 if (retval != ERROR_OK)
495 {
496 free(padding);
497 return retval; /* abort operation */
498 }
499
500 if (written != NULL)
501 *written += run_size; /* add run size to total written counter */
502 }
503
504 free(padding);
505
506 return retval;
507 }
508
509 int flash_write(struct target *target, struct image *image,
510 uint32_t *written, int erase)
511 {
512 return flash_write_unlock(target, image, written, erase, false);
513 }

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)