jtag: linuxgpiod: drop extra parenthesis
[openocd.git] / src / flash / nor / cfi.h
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
9 * *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
14 * *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
17 ***************************************************************************/
18
19 #ifndef OPENOCD_FLASH_NOR_CFI_H
20 #define OPENOCD_FLASH_NOR_CFI_H
21
22 #define CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7 0xE0 /* DQ5..DQ7 */
23 #define CFI_STATUS_POLL_MASK_DQ6_DQ7 0xC0 /* DQ6..DQ7 */
24
25 struct cfi_flash_bank {
26 int x16_as_x8;
27 int jedec_probe;
28 int not_cfi;
29 int probed;
30
31 enum target_endianness endianness;
32 int data_swap;
33
34 uint16_t manufacturer;
35 uint16_t device_id;
36
37 uint8_t qry[3];
38
39 /* identification string */
40 uint16_t pri_id;
41 uint16_t pri_addr;
42 uint16_t alt_id;
43 uint16_t alt_addr;
44
45 /* device-system interface */
46 uint8_t vcc_min;
47 uint8_t vcc_max;
48 uint8_t vpp_min;
49 uint8_t vpp_max;
50 uint8_t word_write_timeout_typ;
51 uint8_t buf_write_timeout_typ;
52 uint8_t block_erase_timeout_typ;
53 uint8_t chip_erase_timeout_typ;
54 uint8_t word_write_timeout_max;
55 uint8_t buf_write_timeout_max;
56 uint8_t block_erase_timeout_max;
57 uint8_t chip_erase_timeout_max;
58
59 uint8_t status_poll_mask;
60
61 /* flash geometry */
62 uint32_t dev_size;
63 uint16_t interface_desc;
64 uint16_t max_buf_write_size;
65 uint8_t num_erase_regions;
66 uint32_t *erase_region_info;
67
68 void *pri_ext;
69 void *alt_ext;
70
71 /* calculated timeouts */
72 unsigned word_write_timeout;
73 unsigned buf_write_timeout;
74 unsigned block_erase_timeout;
75 unsigned chip_erase_timeout;
76 };
77
78 /* Intel primary extended query table
79 * as defined for the Advanced+ Boot Block Flash Memory (C3)
80 * and used by the linux kernel cfi driver (as of 2.6.14)
81 */
82 struct cfi_intel_pri_ext {
83 uint8_t pri[3];
84 uint8_t major_version;
85 uint8_t minor_version;
86 uint32_t feature_support;
87 uint8_t suspend_cmd_support;
88 uint16_t blk_status_reg_mask;
89 uint8_t vcc_optimal;
90 uint8_t vpp_optimal;
91 uint8_t num_protection_fields;
92 uint16_t prot_reg_addr;
93 uint8_t fact_prot_reg_size;
94 uint8_t user_prot_reg_size;
95 uint8_t extra[0];
96 };
97
98 /* Spansion primary extended query table as defined for and used by
99 * the linux kernel cfi driver (as of 2.6.15)
100 */
101 struct cfi_spansion_pri_ext {
102 uint8_t pri[3];
103 uint8_t major_version;
104 uint8_t minor_version;
105 uint8_t SiliconRevision; /* bits 1-0: Address Sensitive Unlock */
106 uint8_t EraseSuspend;
107 uint8_t BlkProt;
108 uint8_t TmpBlkUnprotect;
109 uint8_t BlkProtUnprot;
110 uint8_t SimultaneousOps;
111 uint8_t BurstMode;
112 uint8_t PageMode;
113 uint8_t VppMin;
114 uint8_t VppMax;
115 uint8_t TopBottom;
116 int _reversed_geometry;
117 uint32_t _unlock1;
118 uint32_t _unlock2;
119 };
120
121 /* Atmel primary extended query table as defined for and used by
122 * the linux kernel cfi driver (as of 2.6.20+)
123 */
124 struct cfi_atmel_pri_ext {
125 uint8_t pri[3];
126 uint8_t major_version;
127 uint8_t minor_version;
128 uint8_t features;
129 uint8_t bottom_boot;
130 uint8_t burst_mode;
131 uint8_t page_mode;
132 };
133
134 enum {
135 CFI_UNLOCK_555_2AA,
136 CFI_UNLOCK_5555_2AAA,
137 };
138
139 struct cfi_unlock_addresses {
140 uint32_t unlock1;
141 uint32_t unlock2;
142 };
143
144 struct cfi_fixup {
145 uint16_t mfr;
146 uint16_t id;
147 void (*fixup)(struct flash_bank *bank, const void *param);
148 const void *param;
149 };
150
151 #define CFI_MFR_AMD 0x0001
152 #define CFI_MFR_FUJITSU 0x0004
153 #define CFI_MFR_ATMEL 0x001F
154 #define CFI_MFR_ST 0x0020 /* STMicroelectronics */
155 #define CFI_MFR_AMIC 0x0037
156 #define CFI_MFR_SST 0x00BF
157 #define CFI_MFR_MX 0x00C2
158 #define CFI_MFR_EON 0x007F
159
160 #define CFI_MFR_ANY 0xffff
161 #define CFI_ID_ANY 0xffff
162
163 #endif /* OPENOCD_FLASH_NOR_CFI_H */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)