flash/nor: Allow CFI memory read/write functions be overriden
[openocd.git] / src / flash / nor / cfi.h
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
9 * *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
14 * *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
17 ***************************************************************************/
18
19 #ifndef OPENOCD_FLASH_NOR_CFI_H
20 #define OPENOCD_FLASH_NOR_CFI_H
21
22 #define CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7 0xE0 /* DQ5..DQ7 */
23 #define CFI_STATUS_POLL_MASK_DQ6_DQ7 0xC0 /* DQ6..DQ7 */
24
25 struct cfi_flash_bank {
26 int x16_as_x8;
27 int jedec_probe;
28 int not_cfi;
29 int probed;
30
31 enum target_endianness endianness;
32 int data_swap;
33
34 uint16_t manufacturer;
35 uint16_t device_id;
36
37 uint8_t qry[3];
38
39 /* identification string */
40 uint16_t pri_id;
41 uint16_t pri_addr;
42 uint16_t alt_id;
43 uint16_t alt_addr;
44
45 /* device-system interface */
46 uint8_t vcc_min;
47 uint8_t vcc_max;
48 uint8_t vpp_min;
49 uint8_t vpp_max;
50 uint8_t word_write_timeout_typ;
51 uint8_t buf_write_timeout_typ;
52 uint8_t block_erase_timeout_typ;
53 uint8_t chip_erase_timeout_typ;
54 uint8_t word_write_timeout_max;
55 uint8_t buf_write_timeout_max;
56 uint8_t block_erase_timeout_max;
57 uint8_t chip_erase_timeout_max;
58
59 uint8_t status_poll_mask;
60
61 /* flash geometry */
62 uint32_t dev_size;
63 uint16_t interface_desc;
64 uint16_t max_buf_write_size;
65 uint8_t num_erase_regions;
66 uint32_t *erase_region_info;
67
68 void *pri_ext;
69 void *alt_ext;
70
71 /* calculated timeouts */
72 unsigned word_write_timeout;
73 unsigned buf_write_timeout;
74 unsigned block_erase_timeout;
75 unsigned chip_erase_timeout;
76
77 /* memory accessors */
78 int (*write_mem)(struct flash_bank *bank, target_addr_t addr,
79 uint32_t count, const uint8_t *buffer);
80 int (*read_mem)(struct flash_bank *bank, target_addr_t addr,
81 uint32_t count, uint8_t *buffer);
82 };
83
84 /* Intel primary extended query table
85 * as defined for the Advanced+ Boot Block Flash Memory (C3)
86 * and used by the linux kernel cfi driver (as of 2.6.14)
87 */
88 struct cfi_intel_pri_ext {
89 uint8_t pri[3];
90 uint8_t major_version;
91 uint8_t minor_version;
92 uint32_t feature_support;
93 uint8_t suspend_cmd_support;
94 uint16_t blk_status_reg_mask;
95 uint8_t vcc_optimal;
96 uint8_t vpp_optimal;
97 uint8_t num_protection_fields;
98 uint16_t prot_reg_addr;
99 uint8_t fact_prot_reg_size;
100 uint8_t user_prot_reg_size;
101 uint8_t extra[0];
102 };
103
104 /* Spansion primary extended query table as defined for and used by
105 * the linux kernel cfi driver (as of 2.6.15)
106 */
107 struct cfi_spansion_pri_ext {
108 uint8_t pri[3];
109 uint8_t major_version;
110 uint8_t minor_version;
111 uint8_t SiliconRevision; /* bits 1-0: Address Sensitive Unlock */
112 uint8_t EraseSuspend;
113 uint8_t BlkProt;
114 uint8_t TmpBlkUnprotect;
115 uint8_t BlkProtUnprot;
116 uint8_t SimultaneousOps;
117 uint8_t BurstMode;
118 uint8_t PageMode;
119 uint8_t VppMin;
120 uint8_t VppMax;
121 uint8_t TopBottom;
122 int _reversed_geometry;
123 uint32_t _unlock1;
124 uint32_t _unlock2;
125 };
126
127 /* Atmel primary extended query table as defined for and used by
128 * the linux kernel cfi driver (as of 2.6.20+)
129 */
130 struct cfi_atmel_pri_ext {
131 uint8_t pri[3];
132 uint8_t major_version;
133 uint8_t minor_version;
134 uint8_t features;
135 uint8_t bottom_boot;
136 uint8_t burst_mode;
137 uint8_t page_mode;
138 };
139
140 enum {
141 CFI_UNLOCK_555_2AA,
142 CFI_UNLOCK_5555_2AAA,
143 };
144
145 struct cfi_unlock_addresses {
146 uint32_t unlock1;
147 uint32_t unlock2;
148 };
149
150 struct cfi_fixup {
151 uint16_t mfr;
152 uint16_t id;
153 void (*fixup)(struct flash_bank *bank, const void *param);
154 const void *param;
155 };
156
157 #define CFI_MFR_AMD 0x0001
158 #define CFI_MFR_FUJITSU 0x0004
159 #define CFI_MFR_ATMEL 0x001F
160 #define CFI_MFR_ST 0x0020 /* STMicroelectronics */
161 #define CFI_MFR_AMIC 0x0037
162 #define CFI_MFR_SST 0x00BF
163 #define CFI_MFR_MX 0x00C2
164 #define CFI_MFR_EON 0x007F
165
166 #define CFI_MFR_ANY 0xffff
167 #define CFI_ID_ANY 0xffff
168
169 #endif /* OPENOCD_FLASH_NOR_CFI_H */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)