1 /***************************************************************************
2 * Copyright (C) 2005, 2007 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * Copyright (C) 2009 Michael Schwingen *
5 * michael@schwingen.org *
6 * Copyright (C) 2010 Øyvind Harboe <oyvind.harboe@zylin.com> *
7 * Copyright (C) 2010 by Antonio Borneo <borneo.antonio@gmail.com> *
9 * This program is free software; you can redistribute it and/or modify *
10 * it under the terms of the GNU General Public License as published by *
11 * the Free Software Foundation; either version 2 of the License, or *
12 * (at your option) any later version. *
14 * This program is distributed in the hope that it will be useful, *
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
17 * GNU General Public License for more details. *
19 * You should have received a copy of the GNU General Public License *
20 * along with this program; if not, write to the *
21 * Free Software Foundation, Inc., *
22 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
23 ***************************************************************************/
32 #include <target/arm.h>
33 #include <target/arm7_9_common.h>
34 #include <target/armv7m.h>
35 #include <target/mips32.h>
36 #include <helper/binarybuffer.h>
37 #include <target/algorithm.h>
39 #define CFI_MAX_BUS_WIDTH 4
40 #define CFI_MAX_CHIP_WIDTH 4
42 /* defines internal maximum size for code fragment in cfi_intel_write_block() */
43 #define CFI_MAX_INTEL_CODESIZE 256
45 /* some id-types with specific handling */
46 #define AT49BV6416 0x00d6
47 #define AT49BV6416T 0x00d2
49 static const struct cfi_unlock_addresses cfi_unlock_addresses
[] = {
50 [CFI_UNLOCK_555_2AA
] = { .unlock1
= 0x555, .unlock2
= 0x2aa },
51 [CFI_UNLOCK_5555_2AAA
] = { .unlock1
= 0x5555, .unlock2
= 0x2aaa },
54 static const int cfi_status_poll_mask_dq6_dq7
= CFI_STATUS_POLL_MASK_DQ6_DQ7
;
56 /* CFI fixups forward declarations */
57 static void cfi_fixup_0002_erase_regions(struct flash_bank
*bank
, const void *param
);
58 static void cfi_fixup_0002_unlock_addresses(struct flash_bank
*bank
, const void *param
);
59 static void cfi_fixup_reversed_erase_regions(struct flash_bank
*bank
, const void *param
);
60 static void cfi_fixup_0002_write_buffer(struct flash_bank
*bank
, const void *param
);
61 static void cfi_fixup_0002_polling_bits(struct flash_bank
*bank
, const void *param
);
63 /* fixup after reading cmdset 0002 primary query table */
64 static const struct cfi_fixup cfi_0002_fixups
[] = {
65 {CFI_MFR_SST
, 0x00D4, cfi_fixup_0002_unlock_addresses
,
66 &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
67 {CFI_MFR_SST
, 0x00D5, cfi_fixup_0002_unlock_addresses
,
68 &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
69 {CFI_MFR_SST
, 0x00D6, cfi_fixup_0002_unlock_addresses
,
70 &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
71 {CFI_MFR_SST
, 0x00D7, cfi_fixup_0002_unlock_addresses
,
72 &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
73 {CFI_MFR_SST
, 0x2780, cfi_fixup_0002_unlock_addresses
,
74 &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
75 {CFI_MFR_SST
, 0x274b, cfi_fixup_0002_unlock_addresses
,
76 &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
77 {CFI_MFR_SST
, 0x235f, cfi_fixup_0002_polling_bits
, /* 39VF3201C */
78 &cfi_status_poll_mask_dq6_dq7
},
79 {CFI_MFR_SST
, 0x236d, cfi_fixup_0002_unlock_addresses
,
80 &cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
]},
81 {CFI_MFR_ATMEL
, 0x00C8, cfi_fixup_reversed_erase_regions
, NULL
},
82 {CFI_MFR_ST
, 0x22C4, cfi_fixup_reversed_erase_regions
, NULL
}, /* M29W160ET */
83 {CFI_MFR_FUJITSU
, 0x22ea, cfi_fixup_0002_unlock_addresses
,
84 &cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
]},
85 {CFI_MFR_FUJITSU
, 0x226b, cfi_fixup_0002_unlock_addresses
,
86 &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
87 {CFI_MFR_AMIC
, 0xb31a, cfi_fixup_0002_unlock_addresses
,
88 &cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
]},
89 {CFI_MFR_MX
, 0x225b, cfi_fixup_0002_unlock_addresses
,
90 &cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
]},
91 {CFI_MFR_EON
, 0x225b, cfi_fixup_0002_unlock_addresses
,
92 &cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
]},
93 {CFI_MFR_AMD
, 0x225b, cfi_fixup_0002_unlock_addresses
,
94 &cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
]},
95 {CFI_MFR_ANY
, CFI_ID_ANY
, cfi_fixup_0002_erase_regions
, NULL
},
96 {CFI_MFR_ST
, 0x227E, cfi_fixup_0002_write_buffer
, NULL
},/* M29W128G */
100 /* fixup after reading cmdset 0001 primary query table */
101 static const struct cfi_fixup cfi_0001_fixups
[] = {
105 static void cfi_fixup(struct flash_bank
*bank
, const struct cfi_fixup
*fixups
)
107 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
108 const struct cfi_fixup
*f
;
110 for (f
= fixups
; f
->fixup
; f
++) {
111 if (((f
->mfr
== CFI_MFR_ANY
) || (f
->mfr
== cfi_info
->manufacturer
)) &&
112 ((f
->id
== CFI_ID_ANY
) || (f
->id
== cfi_info
->device_id
)))
113 f
->fixup(bank
, f
->param
);
117 static inline uint32_t flash_address(struct flash_bank
*bank
, int sector
, uint32_t offset
)
119 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
121 if (cfi_info
->x16_as_x8
)
124 /* while the sector list isn't built, only accesses to sector 0 work */
126 return bank
->base
+ offset
* bank
->bus_width
;
128 if (!bank
->sectors
) {
129 LOG_ERROR("BUG: sector list not yet built");
132 return bank
->base
+ bank
->sectors
[sector
].offset
+ offset
* bank
->bus_width
;
136 static void cfi_command(struct flash_bank
*bank
, uint8_t cmd
, uint8_t *cmd_buf
)
139 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
141 /* clear whole buffer, to ensure bits that exceed the bus_width
144 for (i
= 0; i
< CFI_MAX_BUS_WIDTH
; i
++)
147 if (cfi_info
->endianness
== TARGET_LITTLE_ENDIAN
) {
148 for (i
= bank
->bus_width
; i
> 0; i
--)
149 *cmd_buf
++ = (i
& (bank
->chip_width
- 1)) ? 0x0 : cmd
;
151 for (i
= 1; i
<= bank
->bus_width
; i
++)
152 *cmd_buf
++ = (i
& (bank
->chip_width
- 1)) ? 0x0 : cmd
;
156 static int cfi_send_command(struct flash_bank
*bank
, uint8_t cmd
, uint32_t address
)
158 uint8_t command
[CFI_MAX_BUS_WIDTH
];
160 cfi_command(bank
, cmd
, command
);
161 return target_write_memory(bank
->target
, address
, bank
->bus_width
, 1, command
);
164 /* read unsigned 8-bit value from the bank
165 * flash banks are expected to be made of similar chips
166 * the query result should be the same for all
168 static int cfi_query_u8(struct flash_bank
*bank
, int sector
, uint32_t offset
, uint8_t *val
)
170 struct target
*target
= bank
->target
;
171 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
172 uint8_t data
[CFI_MAX_BUS_WIDTH
];
175 retval
= target_read_memory(target
, flash_address(bank
, sector
, offset
),
176 bank
->bus_width
, 1, data
);
177 if (retval
!= ERROR_OK
)
180 if (cfi_info
->endianness
== TARGET_LITTLE_ENDIAN
)
183 *val
= data
[bank
->bus_width
- 1];
188 /* read unsigned 8-bit value from the bank
189 * in case of a bank made of multiple chips,
190 * the individual values are ORed
192 static int cfi_get_u8(struct flash_bank
*bank
, int sector
, uint32_t offset
, uint8_t *val
)
194 struct target
*target
= bank
->target
;
195 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
196 uint8_t data
[CFI_MAX_BUS_WIDTH
];
200 retval
= target_read_memory(target
, flash_address(bank
, sector
, offset
),
201 bank
->bus_width
, 1, data
);
202 if (retval
!= ERROR_OK
)
205 if (cfi_info
->endianness
== TARGET_LITTLE_ENDIAN
) {
206 for (i
= 0; i
< bank
->bus_width
/ bank
->chip_width
; i
++)
212 for (i
= 0; i
< bank
->bus_width
/ bank
->chip_width
; i
++)
213 value
|= data
[bank
->bus_width
- 1 - i
];
220 static int cfi_query_u16(struct flash_bank
*bank
, int sector
, uint32_t offset
, uint16_t *val
)
222 struct target
*target
= bank
->target
;
223 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
224 uint8_t data
[CFI_MAX_BUS_WIDTH
* 2];
227 if (cfi_info
->x16_as_x8
) {
229 for (i
= 0; i
< 2; i
++) {
230 retval
= target_read_memory(target
, flash_address(bank
, sector
, offset
+ i
),
231 bank
->bus_width
, 1, &data
[i
* bank
->bus_width
]);
232 if (retval
!= ERROR_OK
)
236 retval
= target_read_memory(target
, flash_address(bank
, sector
, offset
),
237 bank
->bus_width
, 2, data
);
238 if (retval
!= ERROR_OK
)
242 if (cfi_info
->endianness
== TARGET_LITTLE_ENDIAN
)
243 *val
= data
[0] | data
[bank
->bus_width
] << 8;
245 *val
= data
[bank
->bus_width
- 1] | data
[(2 * bank
->bus_width
) - 1] << 8;
250 static int cfi_query_u32(struct flash_bank
*bank
, int sector
, uint32_t offset
, uint32_t *val
)
252 struct target
*target
= bank
->target
;
253 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
254 uint8_t data
[CFI_MAX_BUS_WIDTH
* 4];
257 if (cfi_info
->x16_as_x8
) {
259 for (i
= 0; i
< 4; i
++) {
260 retval
= target_read_memory(target
, flash_address(bank
, sector
, offset
+ i
),
261 bank
->bus_width
, 1, &data
[i
* bank
->bus_width
]);
262 if (retval
!= ERROR_OK
)
266 retval
= target_read_memory(target
, flash_address(bank
, sector
, offset
),
267 bank
->bus_width
, 4, data
);
268 if (retval
!= ERROR_OK
)
272 if (cfi_info
->endianness
== TARGET_LITTLE_ENDIAN
)
273 *val
= data
[0] | data
[bank
->bus_width
] << 8 |
274 data
[bank
->bus_width
* 2] << 16 | data
[bank
->bus_width
* 3] << 24;
276 *val
= data
[bank
->bus_width
- 1] | data
[(2 * bank
->bus_width
) - 1] << 8 |
277 data
[(3 * bank
->bus_width
) - 1] << 16 |
278 data
[(4 * bank
->bus_width
) - 1] << 24;
283 static int cfi_reset(struct flash_bank
*bank
)
285 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
286 int retval
= ERROR_OK
;
288 retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0));
289 if (retval
!= ERROR_OK
)
292 retval
= cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0));
293 if (retval
!= ERROR_OK
)
296 if (cfi_info
->manufacturer
== 0x20 &&
297 (cfi_info
->device_id
== 0x227E || cfi_info
->device_id
== 0x7E)) {
298 /* Numonix M29W128G is cmd 0xFF intolerant - causes internal undefined state
299 * so we send an extra 0xF0 reset to fix the bug */
300 retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x00));
301 if (retval
!= ERROR_OK
)
308 static void cfi_intel_clear_status_register(struct flash_bank
*bank
)
310 cfi_send_command(bank
, 0x50, flash_address(bank
, 0, 0x0));
313 static int cfi_intel_wait_status_busy(struct flash_bank
*bank
, int timeout
, uint8_t *val
)
317 int retval
= ERROR_OK
;
321 LOG_ERROR("timeout while waiting for WSM to become ready");
325 retval
= cfi_get_u8(bank
, 0, 0x0, &status
);
326 if (retval
!= ERROR_OK
)
335 /* mask out bit 0 (reserved) */
336 status
= status
& 0xfe;
338 LOG_DEBUG("status: 0x%x", status
);
340 if (status
!= 0x80) {
341 LOG_ERROR("status register: 0x%x", status
);
343 LOG_ERROR("Block Lock-Bit Detected, Operation Abort");
345 LOG_ERROR("Program suspended");
347 LOG_ERROR("Low Programming Voltage Detected, Operation Aborted");
349 LOG_ERROR("Program Error / Error in Setting Lock-Bit");
351 LOG_ERROR("Error in Block Erasure or Clear Lock-Bits");
353 LOG_ERROR("Block Erase Suspended");
355 cfi_intel_clear_status_register(bank
);
364 static int cfi_spansion_wait_status_busy(struct flash_bank
*bank
, int timeout
)
366 uint8_t status
, oldstatus
;
367 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
370 retval
= cfi_get_u8(bank
, 0, 0x0, &oldstatus
);
371 if (retval
!= ERROR_OK
)
375 retval
= cfi_get_u8(bank
, 0, 0x0, &status
);
377 if (retval
!= ERROR_OK
)
380 if ((status
^ oldstatus
) & 0x40) {
381 if (status
& cfi_info
->status_poll_mask
& 0x20) {
382 retval
= cfi_get_u8(bank
, 0, 0x0, &oldstatus
);
383 if (retval
!= ERROR_OK
)
385 retval
= cfi_get_u8(bank
, 0, 0x0, &status
);
386 if (retval
!= ERROR_OK
)
388 if ((status
^ oldstatus
) & 0x40) {
389 LOG_ERROR("dq5 timeout, status: 0x%x", status
);
390 return ERROR_FLASH_OPERATION_FAILED
;
392 LOG_DEBUG("status: 0x%x", status
);
396 } else {/* no toggle: finished, OK */
397 LOG_DEBUG("status: 0x%x", status
);
403 } while (timeout
-- > 0);
405 LOG_ERROR("timeout, status: 0x%x", status
);
407 return ERROR_FLASH_BUSY
;
410 static int cfi_read_intel_pri_ext(struct flash_bank
*bank
)
413 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
414 struct cfi_intel_pri_ext
*pri_ext
;
416 if (cfi_info
->pri_ext
)
417 free(cfi_info
->pri_ext
);
419 pri_ext
= malloc(sizeof(struct cfi_intel_pri_ext
));
420 if (pri_ext
== NULL
) {
421 LOG_ERROR("Out of memory");
424 cfi_info
->pri_ext
= pri_ext
;
426 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0, &pri_ext
->pri
[0]);
427 if (retval
!= ERROR_OK
)
429 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 1, &pri_ext
->pri
[1]);
430 if (retval
!= ERROR_OK
)
432 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 2, &pri_ext
->pri
[2]);
433 if (retval
!= ERROR_OK
)
436 if ((pri_ext
->pri
[0] != 'P') || (pri_ext
->pri
[1] != 'R') || (pri_ext
->pri
[2] != 'I')) {
437 retval
= cfi_reset(bank
);
438 if (retval
!= ERROR_OK
)
440 LOG_ERROR("Could not read bank flash bank information");
441 return ERROR_FLASH_BANK_INVALID
;
444 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 3, &pri_ext
->major_version
);
445 if (retval
!= ERROR_OK
)
447 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 4, &pri_ext
->minor_version
);
448 if (retval
!= ERROR_OK
)
451 LOG_DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext
->pri
[0], pri_ext
->pri
[1],
452 pri_ext
->pri
[2], pri_ext
->major_version
, pri_ext
->minor_version
);
454 retval
= cfi_query_u32(bank
, 0, cfi_info
->pri_addr
+ 5, &pri_ext
->feature_support
);
455 if (retval
!= ERROR_OK
)
457 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 9, &pri_ext
->suspend_cmd_support
);
458 if (retval
!= ERROR_OK
)
460 retval
= cfi_query_u16(bank
, 0, cfi_info
->pri_addr
+ 0xa, &pri_ext
->blk_status_reg_mask
);
461 if (retval
!= ERROR_OK
)
464 LOG_DEBUG("feature_support: 0x%" PRIx32
", suspend_cmd_support: "
465 "0x%x, blk_status_reg_mask: 0x%x",
466 pri_ext
->feature_support
,
467 pri_ext
->suspend_cmd_support
,
468 pri_ext
->blk_status_reg_mask
);
470 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0xc, &pri_ext
->vcc_optimal
);
471 if (retval
!= ERROR_OK
)
473 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0xd, &pri_ext
->vpp_optimal
);
474 if (retval
!= ERROR_OK
)
477 LOG_DEBUG("Vcc opt: %x.%x, Vpp opt: %u.%x",
478 (pri_ext
->vcc_optimal
& 0xf0) >> 4, pri_ext
->vcc_optimal
& 0x0f,
479 (pri_ext
->vpp_optimal
& 0xf0) >> 4, pri_ext
->vpp_optimal
& 0x0f);
481 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0xe, &pri_ext
->num_protection_fields
);
482 if (retval
!= ERROR_OK
)
484 if (pri_ext
->num_protection_fields
!= 1) {
485 LOG_WARNING("expected one protection register field, but found %i",
486 pri_ext
->num_protection_fields
);
489 retval
= cfi_query_u16(bank
, 0, cfi_info
->pri_addr
+ 0xf, &pri_ext
->prot_reg_addr
);
490 if (retval
!= ERROR_OK
)
492 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0x11, &pri_ext
->fact_prot_reg_size
);
493 if (retval
!= ERROR_OK
)
495 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0x12, &pri_ext
->user_prot_reg_size
);
496 if (retval
!= ERROR_OK
)
499 LOG_DEBUG("protection_fields: %i, prot_reg_addr: 0x%x, "
500 "factory pre-programmed: %i, user programmable: %i",
501 pri_ext
->num_protection_fields
, pri_ext
->prot_reg_addr
,
502 1 << pri_ext
->fact_prot_reg_size
, 1 << pri_ext
->user_prot_reg_size
);
507 static int cfi_read_spansion_pri_ext(struct flash_bank
*bank
)
510 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
511 struct cfi_spansion_pri_ext
*pri_ext
;
513 if (cfi_info
->pri_ext
)
514 free(cfi_info
->pri_ext
);
516 pri_ext
= malloc(sizeof(struct cfi_spansion_pri_ext
));
517 if (pri_ext
== NULL
) {
518 LOG_ERROR("Out of memory");
521 cfi_info
->pri_ext
= pri_ext
;
523 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0, &pri_ext
->pri
[0]);
524 if (retval
!= ERROR_OK
)
526 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 1, &pri_ext
->pri
[1]);
527 if (retval
!= ERROR_OK
)
529 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 2, &pri_ext
->pri
[2]);
530 if (retval
!= ERROR_OK
)
533 /* default values for implementation specific workarounds */
534 pri_ext
->_unlock1
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock1
;
535 pri_ext
->_unlock2
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock2
;
536 pri_ext
->_reversed_geometry
= 0;
538 if ((pri_ext
->pri
[0] != 'P') || (pri_ext
->pri
[1] != 'R') || (pri_ext
->pri
[2] != 'I')) {
539 retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0));
540 if (retval
!= ERROR_OK
)
542 LOG_ERROR("Could not read spansion bank information");
543 return ERROR_FLASH_BANK_INVALID
;
546 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 3, &pri_ext
->major_version
);
547 if (retval
!= ERROR_OK
)
549 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 4, &pri_ext
->minor_version
);
550 if (retval
!= ERROR_OK
)
553 LOG_DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext
->pri
[0], pri_ext
->pri
[1],
554 pri_ext
->pri
[2], pri_ext
->major_version
, pri_ext
->minor_version
);
556 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 5, &pri_ext
->SiliconRevision
);
557 if (retval
!= ERROR_OK
)
559 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 6, &pri_ext
->EraseSuspend
);
560 if (retval
!= ERROR_OK
)
562 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 7, &pri_ext
->BlkProt
);
563 if (retval
!= ERROR_OK
)
565 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 8, &pri_ext
->TmpBlkUnprotect
);
566 if (retval
!= ERROR_OK
)
568 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 9, &pri_ext
->BlkProtUnprot
);
569 if (retval
!= ERROR_OK
)
571 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 10, &pri_ext
->SimultaneousOps
);
572 if (retval
!= ERROR_OK
)
574 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 11, &pri_ext
->BurstMode
);
575 if (retval
!= ERROR_OK
)
577 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 12, &pri_ext
->PageMode
);
578 if (retval
!= ERROR_OK
)
580 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 13, &pri_ext
->VppMin
);
581 if (retval
!= ERROR_OK
)
583 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 14, &pri_ext
->VppMax
);
584 if (retval
!= ERROR_OK
)
586 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 15, &pri_ext
->TopBottom
);
587 if (retval
!= ERROR_OK
)
590 LOG_DEBUG("Silicon Revision: 0x%x, Erase Suspend: 0x%x, Block protect: 0x%x",
591 pri_ext
->SiliconRevision
, pri_ext
->EraseSuspend
, pri_ext
->BlkProt
);
593 LOG_DEBUG("Temporary Unprotect: 0x%x, Block Protect Scheme: 0x%x, "
594 "Simultaneous Ops: 0x%x", pri_ext
->TmpBlkUnprotect
,
595 pri_ext
->BlkProtUnprot
, pri_ext
->SimultaneousOps
);
597 LOG_DEBUG("Burst Mode: 0x%x, Page Mode: 0x%x, ", pri_ext
->BurstMode
, pri_ext
->PageMode
);
600 LOG_DEBUG("Vpp min: %u.%x, Vpp max: %u.%x",
601 (pri_ext
->VppMin
& 0xf0) >> 4, pri_ext
->VppMin
& 0x0f,
602 (pri_ext
->VppMax
& 0xf0) >> 4, pri_ext
->VppMax
& 0x0f);
604 LOG_DEBUG("WP# protection 0x%x", pri_ext
->TopBottom
);
609 static int cfi_read_atmel_pri_ext(struct flash_bank
*bank
)
612 struct cfi_atmel_pri_ext atmel_pri_ext
;
613 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
614 struct cfi_spansion_pri_ext
*pri_ext
;
616 if (cfi_info
->pri_ext
)
617 free(cfi_info
->pri_ext
);
619 pri_ext
= malloc(sizeof(struct cfi_spansion_pri_ext
));
620 if (pri_ext
== NULL
) {
621 LOG_ERROR("Out of memory");
625 /* ATMEL devices use the same CFI primary command set (0x2) as AMD/Spansion,
626 * but a different primary extended query table.
627 * We read the atmel table, and prepare a valid AMD/Spansion query table.
630 memset(pri_ext
, 0, sizeof(struct cfi_spansion_pri_ext
));
632 cfi_info
->pri_ext
= pri_ext
;
634 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0, &atmel_pri_ext
.pri
[0]);
635 if (retval
!= ERROR_OK
)
637 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 1, &atmel_pri_ext
.pri
[1]);
638 if (retval
!= ERROR_OK
)
640 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 2, &atmel_pri_ext
.pri
[2]);
641 if (retval
!= ERROR_OK
)
644 if ((atmel_pri_ext
.pri
[0] != 'P') || (atmel_pri_ext
.pri
[1] != 'R')
645 || (atmel_pri_ext
.pri
[2] != 'I')) {
646 retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0));
647 if (retval
!= ERROR_OK
)
649 LOG_ERROR("Could not read atmel bank information");
650 return ERROR_FLASH_BANK_INVALID
;
653 pri_ext
->pri
[0] = atmel_pri_ext
.pri
[0];
654 pri_ext
->pri
[1] = atmel_pri_ext
.pri
[1];
655 pri_ext
->pri
[2] = atmel_pri_ext
.pri
[2];
657 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 3, &atmel_pri_ext
.major_version
);
658 if (retval
!= ERROR_OK
)
660 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 4, &atmel_pri_ext
.minor_version
);
661 if (retval
!= ERROR_OK
)
664 LOG_DEBUG("pri: '%c%c%c', version: %c.%c", atmel_pri_ext
.pri
[0],
665 atmel_pri_ext
.pri
[1], atmel_pri_ext
.pri
[2],
666 atmel_pri_ext
.major_version
, atmel_pri_ext
.minor_version
);
668 pri_ext
->major_version
= atmel_pri_ext
.major_version
;
669 pri_ext
->minor_version
= atmel_pri_ext
.minor_version
;
671 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 5, &atmel_pri_ext
.features
);
672 if (retval
!= ERROR_OK
)
674 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 6, &atmel_pri_ext
.bottom_boot
);
675 if (retval
!= ERROR_OK
)
677 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 7, &atmel_pri_ext
.burst_mode
);
678 if (retval
!= ERROR_OK
)
680 retval
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 8, &atmel_pri_ext
.page_mode
);
681 if (retval
!= ERROR_OK
)
685 "features: 0x%2.2x, bottom_boot: 0x%2.2x, burst_mode: 0x%2.2x, page_mode: 0x%2.2x",
686 atmel_pri_ext
.features
,
687 atmel_pri_ext
.bottom_boot
,
688 atmel_pri_ext
.burst_mode
,
689 atmel_pri_ext
.page_mode
);
691 if (atmel_pri_ext
.features
& 0x02)
692 pri_ext
->EraseSuspend
= 2;
694 /* some chips got it backwards... */
695 if (cfi_info
->device_id
== AT49BV6416
||
696 cfi_info
->device_id
== AT49BV6416T
) {
697 if (atmel_pri_ext
.bottom_boot
)
698 pri_ext
->TopBottom
= 3;
700 pri_ext
->TopBottom
= 2;
702 if (atmel_pri_ext
.bottom_boot
)
703 pri_ext
->TopBottom
= 2;
705 pri_ext
->TopBottom
= 3;
708 pri_ext
->_unlock1
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock1
;
709 pri_ext
->_unlock2
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock2
;
714 static int cfi_read_0002_pri_ext(struct flash_bank
*bank
)
716 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
718 if (cfi_info
->manufacturer
== CFI_MFR_ATMEL
)
719 return cfi_read_atmel_pri_ext(bank
);
721 return cfi_read_spansion_pri_ext(bank
);
724 static int cfi_spansion_info(struct flash_bank
*bank
, char *buf
, int buf_size
)
727 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
728 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
730 printed
= snprintf(buf
, buf_size
, "\nSpansion primary algorithm extend information:\n");
734 printed
= snprintf(buf
, buf_size
, "pri: '%c%c%c', version: %c.%c\n", pri_ext
->pri
[0],
735 pri_ext
->pri
[1], pri_ext
->pri
[2],
736 pri_ext
->major_version
, pri_ext
->minor_version
);
740 printed
= snprintf(buf
, buf_size
, "Silicon Rev.: 0x%x, Address Sensitive unlock: 0x%x\n",
741 (pri_ext
->SiliconRevision
) >> 2,
742 (pri_ext
->SiliconRevision
) & 0x03);
746 printed
= snprintf(buf
, buf_size
, "Erase Suspend: 0x%x, Sector Protect: 0x%x\n",
747 pri_ext
->EraseSuspend
,
752 snprintf(buf
, buf_size
, "VppMin: %u.%x, VppMax: %u.%x\n",
753 (pri_ext
->VppMin
& 0xf0) >> 4, pri_ext
->VppMin
& 0x0f,
754 (pri_ext
->VppMax
& 0xf0) >> 4, pri_ext
->VppMax
& 0x0f);
759 static int cfi_intel_info(struct flash_bank
*bank
, char *buf
, int buf_size
)
762 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
763 struct cfi_intel_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
765 printed
= snprintf(buf
, buf_size
, "\nintel primary algorithm extend information:\n");
769 printed
= snprintf(buf
,
771 "pri: '%c%c%c', version: %c.%c\n",
775 pri_ext
->major_version
,
776 pri_ext
->minor_version
);
780 printed
= snprintf(buf
,
782 "feature_support: 0x%" PRIx32
", "
783 "suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x\n",
784 pri_ext
->feature_support
,
785 pri_ext
->suspend_cmd_support
,
786 pri_ext
->blk_status_reg_mask
);
790 printed
= snprintf(buf
, buf_size
, "Vcc opt: %x.%x, Vpp opt: %u.%x\n",
791 (pri_ext
->vcc_optimal
& 0xf0) >> 4, pri_ext
->vcc_optimal
& 0x0f,
792 (pri_ext
->vpp_optimal
& 0xf0) >> 4, pri_ext
->vpp_optimal
& 0x0f);
796 snprintf(buf
, buf_size
, "protection_fields: %i, prot_reg_addr: 0x%x, "
797 "factory pre-programmed: %i, user programmable: %i\n",
798 pri_ext
->num_protection_fields
, pri_ext
->prot_reg_addr
,
799 1 << pri_ext
->fact_prot_reg_size
, 1 << pri_ext
->user_prot_reg_size
);
804 /* flash_bank cfi <base> <size> <chip_width> <bus_width> <target#> [options]
806 FLASH_BANK_COMMAND_HANDLER(cfi_flash_bank_command
)
808 struct cfi_flash_bank
*cfi_info
;
812 return ERROR_COMMAND_SYNTAX_ERROR
;
815 * - not exceed max value;
817 * - be equal to a power of 2.
818 * bus must be wide enough to hold one chip */
819 if ((bank
->chip_width
> CFI_MAX_CHIP_WIDTH
)
820 || (bank
->bus_width
> CFI_MAX_BUS_WIDTH
)
821 || (bank
->chip_width
== 0)
822 || (bank
->bus_width
== 0)
823 || (bank
->chip_width
& (bank
->chip_width
- 1))
824 || (bank
->bus_width
& (bank
->bus_width
- 1))
825 || (bank
->chip_width
> bank
->bus_width
)) {
826 LOG_ERROR("chip and bus width have to specified in bytes");
827 return ERROR_FLASH_BANK_INVALID
;
830 cfi_info
= malloc(sizeof(struct cfi_flash_bank
));
831 cfi_info
->probed
= 0;
832 cfi_info
->erase_region_info
= NULL
;
833 cfi_info
->pri_ext
= NULL
;
834 bank
->driver_priv
= cfi_info
;
836 cfi_info
->x16_as_x8
= 0;
837 cfi_info
->jedec_probe
= 0;
838 cfi_info
->not_cfi
= 0;
840 for (unsigned i
= 6; i
< CMD_ARGC
; i
++) {
841 if (strcmp(CMD_ARGV
[i
], "x16_as_x8") == 0)
842 cfi_info
->x16_as_x8
= 1;
843 else if (strcmp(CMD_ARGV
[i
], "bus_swap") == 0)
845 else if (strcmp(CMD_ARGV
[i
], "jedec_probe") == 0)
846 cfi_info
->jedec_probe
= 1;
850 cfi_info
->endianness
=
851 bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
?
852 TARGET_BIG_ENDIAN
: TARGET_LITTLE_ENDIAN
;
854 cfi_info
->endianness
= bank
->target
->endianness
;
856 /* bank wasn't probed yet */
857 cfi_info
->qry
[0] = 0xff;
862 static int cfi_intel_erase(struct flash_bank
*bank
, int first
, int last
)
865 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
868 cfi_intel_clear_status_register(bank
);
870 for (i
= first
; i
<= last
; i
++) {
871 retval
= cfi_send_command(bank
, 0x20, flash_address(bank
, i
, 0x0));
872 if (retval
!= ERROR_OK
)
875 retval
= cfi_send_command(bank
, 0xd0, flash_address(bank
, i
, 0x0));
876 if (retval
!= ERROR_OK
)
880 retval
= cfi_intel_wait_status_busy(bank
, cfi_info
->block_erase_timeout
, &status
);
881 if (retval
!= ERROR_OK
)
885 bank
->sectors
[i
].is_erased
= 1;
887 retval
= cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0));
888 if (retval
!= ERROR_OK
)
891 LOG_ERROR("couldn't erase block %i of flash bank at base 0x%"
892 PRIx32
, i
, bank
->base
);
893 return ERROR_FLASH_OPERATION_FAILED
;
897 return cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0));
900 static int cfi_spansion_erase(struct flash_bank
*bank
, int first
, int last
)
903 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
904 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
907 for (i
= first
; i
<= last
; i
++) {
908 retval
= cfi_send_command(bank
, 0xaa, flash_address(bank
, 0, pri_ext
->_unlock1
));
909 if (retval
!= ERROR_OK
)
912 retval
= cfi_send_command(bank
, 0x55, flash_address(bank
, 0, pri_ext
->_unlock2
));
913 if (retval
!= ERROR_OK
)
916 retval
= cfi_send_command(bank
, 0x80, flash_address(bank
, 0, pri_ext
->_unlock1
));
917 if (retval
!= ERROR_OK
)
920 retval
= cfi_send_command(bank
, 0xaa, flash_address(bank
, 0, pri_ext
->_unlock1
));
921 if (retval
!= ERROR_OK
)
924 retval
= cfi_send_command(bank
, 0x55, flash_address(bank
, 0, pri_ext
->_unlock2
));
925 if (retval
!= ERROR_OK
)
928 retval
= cfi_send_command(bank
, 0x30, flash_address(bank
, i
, 0x0));
929 if (retval
!= ERROR_OK
)
932 if (cfi_spansion_wait_status_busy(bank
, cfi_info
->block_erase_timeout
) == ERROR_OK
)
933 bank
->sectors
[i
].is_erased
= 1;
935 retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0));
936 if (retval
!= ERROR_OK
)
939 LOG_ERROR("couldn't erase block %i of flash bank at base 0x%"
940 PRIx32
, i
, bank
->base
);
941 return ERROR_FLASH_OPERATION_FAILED
;
945 return cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0));
948 static int cfi_erase(struct flash_bank
*bank
, int first
, int last
)
950 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
952 if (bank
->target
->state
!= TARGET_HALTED
) {
953 LOG_ERROR("Target not halted");
954 return ERROR_TARGET_NOT_HALTED
;
957 if ((first
< 0) || (last
< first
) || (last
>= bank
->num_sectors
))
958 return ERROR_FLASH_SECTOR_INVALID
;
960 if (cfi_info
->qry
[0] != 'Q')
961 return ERROR_FLASH_BANK_NOT_PROBED
;
963 switch (cfi_info
->pri_id
) {
966 return cfi_intel_erase(bank
, first
, last
);
969 return cfi_spansion_erase(bank
, first
, last
);
972 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
979 static int cfi_intel_protect(struct flash_bank
*bank
, int set
, int first
, int last
)
982 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
983 struct cfi_intel_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
987 /* if the device supports neither legacy lock/unlock (bit 3) nor
988 * instant individual block locking (bit 5).
990 if (!(pri_ext
->feature_support
& 0x28)) {
991 LOG_ERROR("lock/unlock not supported on flash");
992 return ERROR_FLASH_OPERATION_FAILED
;
995 cfi_intel_clear_status_register(bank
);
997 for (i
= first
; i
<= last
; i
++) {
998 retval
= cfi_send_command(bank
, 0x60, flash_address(bank
, i
, 0x0));
999 if (retval
!= ERROR_OK
)
1002 retval
= cfi_send_command(bank
, 0x01, flash_address(bank
, i
, 0x0));
1003 if (retval
!= ERROR_OK
)
1005 bank
->sectors
[i
].is_protected
= 1;
1007 retval
= cfi_send_command(bank
, 0xd0, flash_address(bank
, i
, 0x0));
1008 if (retval
!= ERROR_OK
)
1010 bank
->sectors
[i
].is_protected
= 0;
1013 /* instant individual block locking doesn't require reading of the status register
1015 if (!(pri_ext
->feature_support
& 0x20)) {
1016 /* Clear lock bits operation may take up to 1.4s */
1018 retval
= cfi_intel_wait_status_busy(bank
, 1400, &status
);
1019 if (retval
!= ERROR_OK
)
1022 uint8_t block_status
;
1023 /* read block lock bit, to verify status */
1024 retval
= cfi_send_command(bank
, 0x90, flash_address(bank
, 0, 0x55));
1025 if (retval
!= ERROR_OK
)
1027 retval
= cfi_get_u8(bank
, i
, 0x2, &block_status
);
1028 if (retval
!= ERROR_OK
)
1031 if ((block_status
& 0x1) != set
) {
1033 "couldn't change block lock status (set = %i, block_status = 0x%2.2x)",
1035 retval
= cfi_send_command(bank
, 0x70, flash_address(bank
, 0, 0x55));
1036 if (retval
!= ERROR_OK
)
1039 retval
= cfi_intel_wait_status_busy(bank
, 10, &status
);
1040 if (retval
!= ERROR_OK
)
1044 return ERROR_FLASH_OPERATION_FAILED
;
1053 /* if the device doesn't support individual block lock bits set/clear,
1054 * all blocks have been unlocked in parallel, so we set those that should be protected
1056 if ((!set
) && (!(pri_ext
->feature_support
& 0x20))) {
1057 /* FIX!!! this code path is broken!!!
1059 * The correct approach is:
1061 * 1. read out current protection status
1063 * 2. override read out protection status w/unprotected.
1065 * 3. re-protect what should be protected.
1068 for (i
= 0; i
< bank
->num_sectors
; i
++) {
1069 if (bank
->sectors
[i
].is_protected
== 1) {
1070 cfi_intel_clear_status_register(bank
);
1072 retval
= cfi_send_command(bank
, 0x60, flash_address(bank
, i
, 0x0));
1073 if (retval
!= ERROR_OK
)
1076 retval
= cfi_send_command(bank
, 0x01, flash_address(bank
, i
, 0x0));
1077 if (retval
!= ERROR_OK
)
1081 retval
= cfi_intel_wait_status_busy(bank
, 100, &status
);
1082 if (retval
!= ERROR_OK
)
1088 return cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0));
1091 static int cfi_protect(struct flash_bank
*bank
, int set
, int first
, int last
)
1093 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
1095 if (bank
->target
->state
!= TARGET_HALTED
) {
1096 LOG_ERROR("Target not halted");
1097 return ERROR_TARGET_NOT_HALTED
;
1100 if ((first
< 0) || (last
< first
) || (last
>= bank
->num_sectors
)) {
1101 LOG_ERROR("Invalid sector range");
1102 return ERROR_FLASH_SECTOR_INVALID
;
1105 if (cfi_info
->qry
[0] != 'Q')
1106 return ERROR_FLASH_BANK_NOT_PROBED
;
1108 switch (cfi_info
->pri_id
) {
1111 return cfi_intel_protect(bank
, set
, first
, last
);
1114 LOG_WARNING("protect: cfi primary command set %i unsupported", cfi_info
->pri_id
);
1119 static uint32_t cfi_command_val(struct flash_bank
*bank
, uint8_t cmd
)
1121 struct target
*target
= bank
->target
;
1123 uint8_t buf
[CFI_MAX_BUS_WIDTH
];
1124 cfi_command(bank
, cmd
, buf
);
1125 switch (bank
->bus_width
) {
1130 return target_buffer_get_u16(target
, buf
);
1133 return target_buffer_get_u32(target
, buf
);
1136 LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes",
1142 static int cfi_intel_write_block(struct flash_bank
*bank
, const uint8_t *buffer
,
1143 uint32_t address
, uint32_t count
)
1145 struct target
*target
= bank
->target
;
1146 struct reg_param reg_params
[7];
1147 struct arm_algorithm arm_algo
;
1148 struct working_area
*write_algorithm
;
1149 struct working_area
*source
= NULL
;
1150 uint32_t buffer_size
= 32768;
1151 uint32_t write_command_val
, busy_pattern_val
, error_pattern_val
;
1153 /* algorithm register usage:
1154 * r0: source address (in RAM)
1155 * r1: target address (in Flash)
1157 * r3: flash write command
1158 * r4: status byte (returned to host)
1159 * r5: busy test pattern
1160 * r6: error test pattern
1163 /* see contib/loaders/flash/armv4_5_cfi_intel_32.s for src */
1164 static const uint32_t word_32_code
[] = {
1165 0xe4904004, /* loop: ldr r4, [r0], #4 */
1166 0xe5813000, /* str r3, [r1] */
1167 0xe5814000, /* str r4, [r1] */
1168 0xe5914000, /* busy: ldr r4, [r1] */
1169 0xe0047005, /* and r7, r4, r5 */
1170 0xe1570005, /* cmp r7, r5 */
1171 0x1afffffb, /* bne busy */
1172 0xe1140006, /* tst r4, r6 */
1173 0x1a000003, /* bne done */
1174 0xe2522001, /* subs r2, r2, #1 */
1175 0x0a000001, /* beq done */
1176 0xe2811004, /* add r1, r1 #4 */
1177 0xeafffff2, /* b loop */
1178 0xeafffffe /* done: b -2 */
1181 /* see contib/loaders/flash/armv4_5_cfi_intel_16.s for src */
1182 static const uint32_t word_16_code
[] = {
1183 0xe0d040b2, /* loop: ldrh r4, [r0], #2 */
1184 0xe1c130b0, /* strh r3, [r1] */
1185 0xe1c140b0, /* strh r4, [r1] */
1186 0xe1d140b0, /* busy ldrh r4, [r1] */
1187 0xe0047005, /* and r7, r4, r5 */
1188 0xe1570005, /* cmp r7, r5 */
1189 0x1afffffb, /* bne busy */
1190 0xe1140006, /* tst r4, r6 */
1191 0x1a000003, /* bne done */
1192 0xe2522001, /* subs r2, r2, #1 */
1193 0x0a000001, /* beq done */
1194 0xe2811002, /* add r1, r1 #2 */
1195 0xeafffff2, /* b loop */
1196 0xeafffffe /* done: b -2 */
1199 /* see contib/loaders/flash/armv4_5_cfi_intel_8.s for src */
1200 static const uint32_t word_8_code
[] = {
1201 0xe4d04001, /* loop: ldrb r4, [r0], #1 */
1202 0xe5c13000, /* strb r3, [r1] */
1203 0xe5c14000, /* strb r4, [r1] */
1204 0xe5d14000, /* busy ldrb r4, [r1] */
1205 0xe0047005, /* and r7, r4, r5 */
1206 0xe1570005, /* cmp r7, r5 */
1207 0x1afffffb, /* bne busy */
1208 0xe1140006, /* tst r4, r6 */
1209 0x1a000003, /* bne done */
1210 0xe2522001, /* subs r2, r2, #1 */
1211 0x0a000001, /* beq done */
1212 0xe2811001, /* add r1, r1 #1 */
1213 0xeafffff2, /* b loop */
1214 0xeafffffe /* done: b -2 */
1216 uint8_t target_code
[4*CFI_MAX_INTEL_CODESIZE
];
1217 const uint32_t *target_code_src
;
1218 uint32_t target_code_size
;
1219 int retval
= ERROR_OK
;
1221 /* check we have a supported arch */
1222 if (is_arm(target_to_arm(target
))) {
1223 /* All other ARM CPUs have 32 bit instructions */
1224 arm_algo
.common_magic
= ARM_COMMON_MAGIC
;
1225 arm_algo
.core_mode
= ARM_MODE_SVC
;
1226 arm_algo
.core_state
= ARM_STATE_ARM
;
1228 LOG_ERROR("Unknown architecture");
1229 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1232 cfi_intel_clear_status_register(bank
);
1234 /* If we are setting up the write_algorith, we need target_code_src
1235 * if not we only need target_code_size. */
1237 /* However, we don't want to create multiple code paths, so we
1238 * do the unnecessary evaluation of target_code_src, which the
1239 * compiler will probably nicely optimize away if not needed */
1241 /* prepare algorithm code for target endian */
1242 switch (bank
->bus_width
) {
1244 target_code_src
= word_8_code
;
1245 target_code_size
= sizeof(word_8_code
);
1248 target_code_src
= word_16_code
;
1249 target_code_size
= sizeof(word_16_code
);
1252 target_code_src
= word_32_code
;
1253 target_code_size
= sizeof(word_32_code
);
1256 LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes",
1258 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1261 /* flash write code */
1262 if (target_code_size
> sizeof(target_code
)) {
1263 LOG_WARNING("Internal error - target code buffer to small. "
1264 "Increase CFI_MAX_INTEL_CODESIZE and recompile.");
1265 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1268 target_buffer_set_u32_array(target
, target_code
, target_code_size
/ 4, target_code_src
);
1270 /* Get memory for block write handler */
1271 retval
= target_alloc_working_area(target
,
1274 if (retval
!= ERROR_OK
) {
1275 LOG_WARNING("No working area available, can't do block memory writes");
1276 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1280 /* write algorithm code to working area */
1281 retval
= target_write_buffer(target
, write_algorithm
->address
,
1282 target_code_size
, target_code
);
1283 if (retval
!= ERROR_OK
) {
1284 LOG_ERROR("Unable to write block write code to target");
1288 /* Get a workspace buffer for the data to flash starting with 32k size.
1289 * Half size until buffer would be smaller 256 Bytes then fail back */
1290 /* FIXME Why 256 bytes, why not 32 bytes (smallest flash write page */
1291 while (target_alloc_working_area_try(target
, buffer_size
, &source
) != ERROR_OK
) {
1293 if (buffer_size
<= 256) {
1295 "no large enough working area available, can't do block memory writes");
1296 retval
= ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1302 /* setup algo registers */
1303 init_reg_param(®_params
[0], "r0", 32, PARAM_OUT
);
1304 init_reg_param(®_params
[1], "r1", 32, PARAM_OUT
);
1305 init_reg_param(®_params
[2], "r2", 32, PARAM_OUT
);
1306 init_reg_param(®_params
[3], "r3", 32, PARAM_OUT
);
1307 init_reg_param(®_params
[4], "r4", 32, PARAM_IN
);
1308 init_reg_param(®_params
[5], "r5", 32, PARAM_OUT
);
1309 init_reg_param(®_params
[6], "r6", 32, PARAM_OUT
);
1311 /* prepare command and status register patterns */
1312 write_command_val
= cfi_command_val(bank
, 0x40);
1313 busy_pattern_val
= cfi_command_val(bank
, 0x80);
1314 error_pattern_val
= cfi_command_val(bank
, 0x7e);
1316 LOG_DEBUG("Using target buffer at 0x%08" PRIx32
" and of size 0x%04" PRIx32
,
1317 source
->address
, buffer_size
);
1319 /* Programming main loop */
1321 uint32_t thisrun_count
= (count
> buffer_size
) ? buffer_size
: count
;
1324 retval
= target_write_buffer(target
, source
->address
, thisrun_count
, buffer
);
1325 if (retval
!= ERROR_OK
)
1328 buf_set_u32(reg_params
[0].value
, 0, 32, source
->address
);
1329 buf_set_u32(reg_params
[1].value
, 0, 32, address
);
1330 buf_set_u32(reg_params
[2].value
, 0, 32, thisrun_count
/ bank
->bus_width
);
1332 buf_set_u32(reg_params
[3].value
, 0, 32, write_command_val
);
1333 buf_set_u32(reg_params
[5].value
, 0, 32, busy_pattern_val
);
1334 buf_set_u32(reg_params
[6].value
, 0, 32, error_pattern_val
);
1336 LOG_DEBUG("Write 0x%04" PRIx32
" bytes to flash at 0x%08" PRIx32
,
1337 thisrun_count
, address
);
1339 /* Execute algorithm, assume breakpoint for last instruction */
1340 retval
= target_run_algorithm(target
, 0, NULL
, 7, reg_params
,
1341 write_algorithm
->address
,
1342 write_algorithm
->address
+ target_code_size
-
1344 10000, /* 10s should be enough for max. 32k of data */
1347 /* On failure try a fall back to direct word writes */
1348 if (retval
!= ERROR_OK
) {
1349 cfi_intel_clear_status_register(bank
);
1351 "Execution of flash algorythm failed. Can't fall back. Please report.");
1352 retval
= ERROR_FLASH_OPERATION_FAILED
;
1353 /* retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE; */
1354 /* FIXME To allow fall back or recovery, we must save the actual status
1355 * somewhere, so that a higher level code can start recovery. */
1359 /* Check return value from algo code */
1360 wsm_error
= buf_get_u32(reg_params
[4].value
, 0, 32) & error_pattern_val
;
1362 /* read status register (outputs debug information) */
1364 cfi_intel_wait_status_busy(bank
, 100, &status
);
1365 cfi_intel_clear_status_register(bank
);
1366 retval
= ERROR_FLASH_OPERATION_FAILED
;
1370 buffer
+= thisrun_count
;
1371 address
+= thisrun_count
;
1372 count
-= thisrun_count
;
1377 /* free up resources */
1380 target_free_working_area(target
, source
);
1382 target_free_working_area(target
, write_algorithm
);
1384 destroy_reg_param(®_params
[0]);
1385 destroy_reg_param(®_params
[1]);
1386 destroy_reg_param(®_params
[2]);
1387 destroy_reg_param(®_params
[3]);
1388 destroy_reg_param(®_params
[4]);
1389 destroy_reg_param(®_params
[5]);
1390 destroy_reg_param(®_params
[6]);
1395 static int cfi_spansion_write_block_mips(struct flash_bank
*bank
, const uint8_t *buffer
,
1396 uint32_t address
, uint32_t count
)
1398 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
1399 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
1400 struct target
*target
= bank
->target
;
1401 struct reg_param reg_params
[10];
1402 struct mips32_algorithm mips32_info
;
1403 struct working_area
*write_algorithm
;
1404 struct working_area
*source
;
1405 uint32_t buffer_size
= 32768;
1407 int retval
= ERROR_OK
;
1409 /* input parameters -
1410 * 4 A0 = source address
1411 * 5 A1 = destination address
1412 * 6 A2 = number of writes
1413 * 7 A3 = flash write command
1414 * 8 T0 = constant to mask DQ7 bits (also used for Dq5 with shift)
1415 * output parameters -
1416 * 9 T1 = 0x80 ok 0x00 bad
1418 * 10 T2 = value read from flash to test status
1419 * 11 T3 = holding register
1420 * unlock registers -
1421 * 12 T4 = unlock1_addr
1422 * 13 T5 = unlock1_cmd
1423 * 14 T6 = unlock2_addr
1424 * 15 T7 = unlock2_cmd */
1426 static const uint32_t mips_word_16_code
[] = {
1428 MIPS32_LHU(9, 0, 4), /* lhu $t1, ($a0) ; out = &saddr */
1429 MIPS32_ADDI(4, 4, 2), /* addi $a0, $a0, 2 ; saddr += 2 */
1430 MIPS32_SH(13, 0, 12), /* sh $t5, ($t4) ; *fl_unl_addr1 = fl_unl_cmd1 */
1431 MIPS32_SH(15, 0, 14), /* sh $t7, ($t6) ; *fl_unl_addr2 = fl_unl_cmd2 */
1432 MIPS32_SH(7, 0, 12), /* sh $a3, ($t4) ; *fl_unl_addr1 = fl_write_cmd */
1433 MIPS32_SH(9, 0, 5), /* sh $t1, ($a1) ; *daddr = out */
1434 MIPS32_NOP
, /* nop */
1436 MIPS32_LHU(10, 0, 5), /* lhu $t2, ($a1) ; temp1 = *daddr */
1437 MIPS32_XOR(11, 9, 10), /* xor $t3, $a0, $t2 ; temp2 = out ^ temp1; */
1438 MIPS32_AND(11, 8, 11), /* and $t3, $t0, $t3 ; temp2 = temp2 & DQ7mask */
1439 MIPS32_BNE(11, 8, 13), /* bne $t3, $t0, cont ; if (temp2 != DQ7mask) goto cont */
1440 MIPS32_NOP
, /* nop */
1442 MIPS32_SRL(10, 8, 2), /* srl $t2,$t0,2 ; temp1 = DQ7mask >> 2 */
1443 MIPS32_AND(11, 10, 11), /* and $t3, $t2, $t3 ; temp2 = temp2 & temp1 */
1444 MIPS32_BNE(11, 10, NEG16(8)), /* bne $t3, $t2, busy ; if (temp2 != temp1) goto busy */
1445 MIPS32_NOP
, /* nop */
1447 MIPS32_LHU(10, 0, 5), /* lhu $t2, ($a1) ; temp1 = *daddr */
1448 MIPS32_XOR(11, 9, 10), /* xor $t3, $a0, $t2 ; temp2 = out ^ temp1; */
1449 MIPS32_AND(11, 8, 11), /* and $t3, $t0, $t3 ; temp2 = temp2 & DQ7mask */
1450 MIPS32_BNE(11, 8, 4), /* bne $t3, $t0, cont ; if (temp2 != DQ7mask) goto cont */
1451 MIPS32_NOP
, /* nop */
1453 MIPS32_XOR(9, 9, 9), /* xor $t1, $t1, $t1 ; out = 0 */
1454 MIPS32_BEQ(9, 0, 11), /* beq $t1, $zero, done ; if (out == 0) goto done */
1455 MIPS32_NOP
, /* nop */
1457 MIPS32_ADDI(6, 6, NEG16(1)), /* addi, $a2, $a2, -1 ; numwrites-- */
1458 MIPS32_BNE(6, 0, 5), /* bne $a2, $zero, cont2 ; if (numwrite != 0) goto cont2 */
1459 MIPS32_NOP
, /* nop */
1461 MIPS32_LUI(9, 0), /* lui $t1, 0 */
1462 MIPS32_ORI(9, 9, 0x80), /* ori $t1, $t1, 0x80 ; out = 0x80 */
1464 MIPS32_B(4), /* b done ; goto done */
1465 MIPS32_NOP
, /* nop */
1467 MIPS32_ADDI(5, 5, 2), /* addi $a0, $a0, 2 ; daddr += 2 */
1468 MIPS32_B(NEG16(33)), /* b start ; goto start */
1469 MIPS32_NOP
, /* nop */
1471 MIPS32_SDBBP
, /* sdbbp ; break(); */
1474 mips32_info
.common_magic
= MIPS32_COMMON_MAGIC
;
1475 mips32_info
.isa_mode
= MIPS32_ISA_MIPS32
;
1477 int target_code_size
= 0;
1478 const uint32_t *target_code_src
= NULL
;
1480 switch (bank
->bus_width
) {
1482 /* Check for DQ5 support */
1483 if (cfi_info
->status_poll_mask
& (1 << 5)) {
1484 target_code_src
= mips_word_16_code
;
1485 target_code_size
= sizeof(mips_word_16_code
);
1487 LOG_ERROR("Need DQ5 support");
1488 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1489 /* target_code_src = mips_word_16_code_dq7only; */
1490 /* target_code_size = sizeof(mips_word_16_code_dq7only); */
1494 LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes",
1496 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1499 /* flash write code */
1500 uint8_t *target_code
;
1502 /* convert bus-width dependent algorithm code to correct endianness */
1503 target_code
= malloc(target_code_size
);
1504 if (target_code
== NULL
) {
1505 LOG_ERROR("Out of memory");
1509 target_buffer_set_u32_array(target
, target_code
, target_code_size
/ 4, target_code_src
);
1511 /* allocate working area */
1512 retval
= target_alloc_working_area(target
, target_code_size
,
1514 if (retval
!= ERROR_OK
) {
1519 /* write algorithm code to working area */
1520 retval
= target_write_buffer(target
, write_algorithm
->address
,
1521 target_code_size
, target_code
);
1522 if (retval
!= ERROR_OK
) {
1529 /* the following code still assumes target code is fixed 24*4 bytes */
1531 while (target_alloc_working_area_try(target
, buffer_size
, &source
) != ERROR_OK
) {
1533 if (buffer_size
<= 256) {
1534 /* we already allocated the writing code, but failed to get a
1535 * buffer, free the algorithm */
1536 target_free_working_area(target
, write_algorithm
);
1539 "not enough working area available, can't do block memory writes");
1540 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1545 init_reg_param(®_params
[0], "r4", 32, PARAM_OUT
);
1546 init_reg_param(®_params
[1], "r5", 32, PARAM_OUT
);
1547 init_reg_param(®_params
[2], "r6", 32, PARAM_OUT
);
1548 init_reg_param(®_params
[3], "r7", 32, PARAM_OUT
);
1549 init_reg_param(®_params
[4], "r8", 32, PARAM_OUT
);
1550 init_reg_param(®_params
[5], "r9", 32, PARAM_IN
);
1551 init_reg_param(®_params
[6], "r12", 32, PARAM_OUT
);
1552 init_reg_param(®_params
[7], "r13", 32, PARAM_OUT
);
1553 init_reg_param(®_params
[8], "r14", 32, PARAM_OUT
);
1554 init_reg_param(®_params
[9], "r15", 32, PARAM_OUT
);
1557 uint32_t thisrun_count
= (count
> buffer_size
) ? buffer_size
: count
;
1559 retval
= target_write_buffer(target
, source
->address
, thisrun_count
, buffer
);
1560 if (retval
!= ERROR_OK
)
1563 buf_set_u32(reg_params
[0].value
, 0, 32, source
->address
);
1564 buf_set_u32(reg_params
[1].value
, 0, 32, address
);
1565 buf_set_u32(reg_params
[2].value
, 0, 32, thisrun_count
/ bank
->bus_width
);
1566 buf_set_u32(reg_params
[3].value
, 0, 32, cfi_command_val(bank
, 0xA0));
1567 buf_set_u32(reg_params
[4].value
, 0, 32, cfi_command_val(bank
, 0x80));
1568 buf_set_u32(reg_params
[6].value
, 0, 32, flash_address(bank
, 0, pri_ext
->_unlock1
));
1569 buf_set_u32(reg_params
[7].value
, 0, 32, 0xaaaaaaaa);
1570 buf_set_u32(reg_params
[8].value
, 0, 32, flash_address(bank
, 0, pri_ext
->_unlock2
));
1571 buf_set_u32(reg_params
[9].value
, 0, 32, 0x55555555);
1573 retval
= target_run_algorithm(target
, 0, NULL
, 10, reg_params
,
1574 write_algorithm
->address
,
1575 write_algorithm
->address
+ ((target_code_size
) - 4),
1576 10000, &mips32_info
);
1577 if (retval
!= ERROR_OK
)
1580 status
= buf_get_u32(reg_params
[5].value
, 0, 32);
1581 if (status
!= 0x80) {
1582 LOG_ERROR("flash write block failed status: 0x%" PRIx32
, status
);
1583 retval
= ERROR_FLASH_OPERATION_FAILED
;
1587 buffer
+= thisrun_count
;
1588 address
+= thisrun_count
;
1589 count
-= thisrun_count
;
1592 target_free_all_working_areas(target
);
1594 destroy_reg_param(®_params
[0]);
1595 destroy_reg_param(®_params
[1]);
1596 destroy_reg_param(®_params
[2]);
1597 destroy_reg_param(®_params
[3]);
1598 destroy_reg_param(®_params
[4]);
1599 destroy_reg_param(®_params
[5]);
1600 destroy_reg_param(®_params
[6]);
1601 destroy_reg_param(®_params
[7]);
1602 destroy_reg_param(®_params
[8]);
1603 destroy_reg_param(®_params
[9]);
1608 static int cfi_spansion_write_block(struct flash_bank
*bank
, const uint8_t *buffer
,
1609 uint32_t address
, uint32_t count
)
1611 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
1612 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
1613 struct target
*target
= bank
->target
;
1614 struct reg_param reg_params
[10];
1616 struct arm_algorithm armv4_5_algo
;
1617 struct armv7m_algorithm armv7m_algo
;
1618 struct working_area
*write_algorithm
;
1619 struct working_area
*source
;
1620 uint32_t buffer_size
= 32768;
1622 int retval
= ERROR_OK
;
1624 /* input parameters -
1625 * R0 = source address
1626 * R1 = destination address
1627 * R2 = number of writes
1628 * R3 = flash write command
1629 * R4 = constant to mask DQ7 bits (also used for Dq5 with shift)
1630 * output parameters -
1631 * R5 = 0x80 ok 0x00 bad
1633 * R6 = value read from flash to test status
1634 * R7 = holding register
1635 * unlock registers -
1638 * R10 = unlock2_addr
1639 * R11 = unlock2_cmd */
1641 /* see contib/loaders/flash/armv4_5_cfi_span_32.s for src */
1642 static const uint32_t armv4_5_word_32_code
[] = {
1643 /* 00008100 <sp_32_code>: */
1644 0xe4905004, /* ldr r5, [r0], #4 */
1645 0xe5889000, /* str r9, [r8] */
1646 0xe58ab000, /* str r11, [r10] */
1647 0xe5883000, /* str r3, [r8] */
1648 0xe5815000, /* str r5, [r1] */
1649 0xe1a00000, /* nop */
1650 /* 00008110 <sp_32_busy>: */
1651 0xe5916000, /* ldr r6, [r1] */
1652 0xe0257006, /* eor r7, r5, r6 */
1653 0xe0147007, /* ands r7, r4, r7 */
1654 0x0a000007, /* beq 8140 <sp_32_cont> ; b if DQ7 == Data7 */
1655 0xe0166124, /* ands r6, r6, r4, lsr #2 */
1656 0x0afffff9, /* beq 8110 <sp_32_busy> ; b if DQ5 low */
1657 0xe5916000, /* ldr r6, [r1] */
1658 0xe0257006, /* eor r7, r5, r6 */
1659 0xe0147007, /* ands r7, r4, r7 */
1660 0x0a000001, /* beq 8140 <sp_32_cont> ; b if DQ7 == Data7 */
1661 0xe3a05000, /* mov r5, #0 ; 0x0 - return 0x00, error */
1662 0x1a000004, /* bne 8154 <sp_32_done> */
1663 /* 00008140 <sp_32_cont>: */
1664 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1665 0x03a05080, /* moveq r5, #128 ; 0x80 */
1666 0x0a000001, /* beq 8154 <sp_32_done> */
1667 0xe2811004, /* add r1, r1, #4 ; 0x4 */
1668 0xeaffffe8, /* b 8100 <sp_32_code> */
1669 /* 00008154 <sp_32_done>: */
1670 0xeafffffe /* b 8154 <sp_32_done> */
1673 /* see contib/loaders/flash/armv4_5_cfi_span_16.s for src */
1674 static const uint32_t armv4_5_word_16_code
[] = {
1675 /* 00008158 <sp_16_code>: */
1676 0xe0d050b2, /* ldrh r5, [r0], #2 */
1677 0xe1c890b0, /* strh r9, [r8] */
1678 0xe1cab0b0, /* strh r11, [r10] */
1679 0xe1c830b0, /* strh r3, [r8] */
1680 0xe1c150b0, /* strh r5, [r1] */
1681 0xe1a00000, /* nop (mov r0,r0) */
1682 /* 00008168 <sp_16_busy>: */
1683 0xe1d160b0, /* ldrh r6, [r1] */
1684 0xe0257006, /* eor r7, r5, r6 */
1685 0xe0147007, /* ands r7, r4, r7 */
1686 0x0a000007, /* beq 8198 <sp_16_cont> */
1687 0xe0166124, /* ands r6, r6, r4, lsr #2 */
1688 0x0afffff9, /* beq 8168 <sp_16_busy> */
1689 0xe1d160b0, /* ldrh r6, [r1] */
1690 0xe0257006, /* eor r7, r5, r6 */
1691 0xe0147007, /* ands r7, r4, r7 */
1692 0x0a000001, /* beq 8198 <sp_16_cont> */
1693 0xe3a05000, /* mov r5, #0 ; 0x0 */
1694 0x1a000004, /* bne 81ac <sp_16_done> */
1695 /* 00008198 <sp_16_cont>: */
1696 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1697 0x03a05080, /* moveq r5, #128 ; 0x80 */
1698 0x0a000001, /* beq 81ac <sp_16_done> */
1699 0xe2811002, /* add r1, r1, #2 ; 0x2 */
1700 0xeaffffe8, /* b 8158 <sp_16_code> */
1701 /* 000081ac <sp_16_done>: */
1702 0xeafffffe /* b 81ac <sp_16_done> */
1705 /* see contrib/loaders/flash/armv7m_cfi_span_16.s for src */
1706 static const uint32_t armv7m_word_16_code
[] = {
1727 /* see contrib/loaders/flash/armv7m_cfi_span_16_dq7.s for src */
1728 static const uint32_t armv7m_word_16_code_dq7only
[] = {
1729 /* 00000000 <code>: */
1730 0x5B02F830, /* ldrh.w r5, [r0], #2 */
1731 0x9000F8A8, /* strh.w r9, [r8] */
1732 0xB000F8AA, /* strh.w fp, [sl] */
1733 0x3000F8A8, /* strh.w r3, [r8] */
1734 0xBF00800D, /* strh r5, [r1, #0] */
1737 /* 00000014 <busy>: */
1738 0xEA85880E, /* ldrh r6, [r1, #0] */
1739 /* eor.w r7, r5, r6 */
1740 0x40270706, /* ands r7, r4 */
1741 0x3A01D1FA, /* bne.n 14 <busy> */
1743 0xF101D002, /* beq.n 28 <success> */
1744 0xE7EB0102, /* add.w r1, r1, #2 */
1747 /* 00000028 <success>: */
1748 0x0580F04F, /* mov.w r5, #128 */
1749 0xBF00E7FF, /* b.n 30 <done> */
1750 /* nop (for alignment purposes) */
1752 /* 00000030 <done>: */
1753 0x0000BE00 /* bkpt 0x0000 */
1756 /* see contrib/loaders/flash/armv4_5_cfi_span_16_dq7.s for src */
1757 static const uint32_t armv4_5_word_16_code_dq7only
[] = {
1759 0xe0d050b2, /* ldrh r5, [r0], #2 */
1760 0xe1c890b0, /* strh r9, [r8] */
1761 0xe1cab0b0, /* strh r11, [r10] */
1762 0xe1c830b0, /* strh r3, [r8] */
1763 0xe1c150b0, /* strh r5, [r1] */
1764 0xe1a00000, /* nop (mov r0,r0) */
1766 0xe1d160b0, /* ldrh r6, [r1] */
1767 0xe0257006, /* eor r7, r5, r6 */
1768 0xe2177080, /* ands r7, #0x80 */
1769 0x1afffffb, /* bne 8168 <sp_16_busy> */
1771 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1772 0x03a05080, /* moveq r5, #128 ; 0x80 */
1773 0x0a000001, /* beq 81ac <sp_16_done> */
1774 0xe2811002, /* add r1, r1, #2 ; 0x2 */
1775 0xeafffff0, /* b 8158 <sp_16_code> */
1776 /* 000081ac <sp_16_done>: */
1777 0xeafffffe /* b 81ac <sp_16_done> */
1780 /* see contrib/loaders/flash/armv4_5_cfi_span_8.s for src */
1781 static const uint32_t armv4_5_word_8_code
[] = {
1782 /* 000081b0 <sp_16_code_end>: */
1783 0xe4d05001, /* ldrb r5, [r0], #1 */
1784 0xe5c89000, /* strb r9, [r8] */
1785 0xe5cab000, /* strb r11, [r10] */
1786 0xe5c83000, /* strb r3, [r8] */
1787 0xe5c15000, /* strb r5, [r1] */
1788 0xe1a00000, /* nop (mov r0,r0) */
1789 /* 000081c0 <sp_8_busy>: */
1790 0xe5d16000, /* ldrb r6, [r1] */
1791 0xe0257006, /* eor r7, r5, r6 */
1792 0xe0147007, /* ands r7, r4, r7 */
1793 0x0a000007, /* beq 81f0 <sp_8_cont> */
1794 0xe0166124, /* ands r6, r6, r4, lsr #2 */
1795 0x0afffff9, /* beq 81c0 <sp_8_busy> */
1796 0xe5d16000, /* ldrb r6, [r1] */
1797 0xe0257006, /* eor r7, r5, r6 */
1798 0xe0147007, /* ands r7, r4, r7 */
1799 0x0a000001, /* beq 81f0 <sp_8_cont> */
1800 0xe3a05000, /* mov r5, #0 ; 0x0 */
1801 0x1a000004, /* bne 8204 <sp_8_done> */
1802 /* 000081f0 <sp_8_cont>: */
1803 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1804 0x03a05080, /* moveq r5, #128 ; 0x80 */
1805 0x0a000001, /* beq 8204 <sp_8_done> */
1806 0xe2811001, /* add r1, r1, #1 ; 0x1 */
1807 0xeaffffe8, /* b 81b0 <sp_16_code_end> */
1808 /* 00008204 <sp_8_done>: */
1809 0xeafffffe /* b 8204 <sp_8_done> */
1812 if (strncmp(target_type_name(target
), "mips_m4k", 8) == 0)
1813 return cfi_spansion_write_block_mips(bank
, buffer
, address
, count
);
1815 if (is_armv7m(target_to_armv7m(target
))) { /* armv7m target */
1816 armv7m_algo
.common_magic
= ARMV7M_COMMON_MAGIC
;
1817 armv7m_algo
.core_mode
= ARM_MODE_THREAD
;
1818 arm_algo
= &armv7m_algo
;
1819 } else if (is_arm(target_to_arm(target
))) {
1820 /* All other ARM CPUs have 32 bit instructions */
1821 armv4_5_algo
.common_magic
= ARM_COMMON_MAGIC
;
1822 armv4_5_algo
.core_mode
= ARM_MODE_SVC
;
1823 armv4_5_algo
.core_state
= ARM_STATE_ARM
;
1824 arm_algo
= &armv4_5_algo
;
1826 LOG_ERROR("Unknown architecture");
1827 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1830 int target_code_size
= 0;
1831 const uint32_t *target_code_src
= NULL
;
1833 switch (bank
->bus_width
) {
1835 if (is_armv7m(target_to_armv7m(target
))) {
1836 LOG_ERROR("Unknown ARM architecture");
1839 target_code_src
= armv4_5_word_8_code
;
1840 target_code_size
= sizeof(armv4_5_word_8_code
);
1843 /* Check for DQ5 support */
1844 if (cfi_info
->status_poll_mask
& (1 << 5)) {
1845 if (is_armv7m(target_to_armv7m(target
))) {
1847 target_code_src
= armv7m_word_16_code
;
1848 target_code_size
= sizeof(armv7m_word_16_code
);
1849 } else { /* armv4_5 target */
1850 target_code_src
= armv4_5_word_16_code
;
1851 target_code_size
= sizeof(armv4_5_word_16_code
);
1854 /* No DQ5 support. Use DQ7 DATA# polling only. */
1855 if (is_armv7m(target_to_armv7m(target
))) {
1857 target_code_src
= armv7m_word_16_code_dq7only
;
1858 target_code_size
= sizeof(armv7m_word_16_code_dq7only
);
1859 } else { /* armv4_5 target */
1860 target_code_src
= armv4_5_word_16_code_dq7only
;
1861 target_code_size
= sizeof(armv4_5_word_16_code_dq7only
);
1866 if (is_armv7m(target_to_armv7m(target
))) {
1867 LOG_ERROR("Unknown ARM architecture");
1870 target_code_src
= armv4_5_word_32_code
;
1871 target_code_size
= sizeof(armv4_5_word_32_code
);
1874 LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes",
1876 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1879 /* flash write code */
1880 uint8_t *target_code
;
1882 /* convert bus-width dependent algorithm code to correct endianness */
1883 target_code
= malloc(target_code_size
);
1884 if (target_code
== NULL
) {
1885 LOG_ERROR("Out of memory");
1889 target_buffer_set_u32_array(target
, target_code
, target_code_size
/ 4, target_code_src
);
1891 /* allocate working area */
1892 retval
= target_alloc_working_area(target
, target_code_size
,
1894 if (retval
!= ERROR_OK
) {
1899 /* write algorithm code to working area */
1900 retval
= target_write_buffer(target
, write_algorithm
->address
,
1901 target_code_size
, target_code
);
1902 if (retval
!= ERROR_OK
) {
1909 /* the following code still assumes target code is fixed 24*4 bytes */
1911 while (target_alloc_working_area_try(target
, buffer_size
, &source
) != ERROR_OK
) {
1913 if (buffer_size
<= 256) {
1914 /* we already allocated the writing code, but failed to get a
1915 * buffer, free the algorithm */
1916 target_free_working_area(target
, write_algorithm
);
1919 "not enough working area available, can't do block memory writes");
1920 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1925 init_reg_param(®_params
[0], "r0", 32, PARAM_OUT
);
1926 init_reg_param(®_params
[1], "r1", 32, PARAM_OUT
);
1927 init_reg_param(®_params
[2], "r2", 32, PARAM_OUT
);
1928 init_reg_param(®_params
[3], "r3", 32, PARAM_OUT
);
1929 init_reg_param(®_params
[4], "r4", 32, PARAM_OUT
);
1930 init_reg_param(®_params
[5], "r5", 32, PARAM_IN
);
1931 init_reg_param(®_params
[6], "r8", 32, PARAM_OUT
);
1932 init_reg_param(®_params
[7], "r9", 32, PARAM_OUT
);
1933 init_reg_param(®_params
[8], "r10", 32, PARAM_OUT
);
1934 init_reg_param(®_params
[9], "r11", 32, PARAM_OUT
);
1937 uint32_t thisrun_count
= (count
> buffer_size
) ? buffer_size
: count
;
1939 retval
= target_write_buffer(target
, source
->address
, thisrun_count
, buffer
);
1940 if (retval
!= ERROR_OK
)
1943 buf_set_u32(reg_params
[0].value
, 0, 32, source
->address
);
1944 buf_set_u32(reg_params
[1].value
, 0, 32, address
);
1945 buf_set_u32(reg_params
[2].value
, 0, 32, thisrun_count
/ bank
->bus_width
);
1946 buf_set_u32(reg_params
[3].value
, 0, 32, cfi_command_val(bank
, 0xA0));
1947 buf_set_u32(reg_params
[4].value
, 0, 32, cfi_command_val(bank
, 0x80));
1948 buf_set_u32(reg_params
[6].value
, 0, 32, flash_address(bank
, 0, pri_ext
->_unlock1
));
1949 buf_set_u32(reg_params
[7].value
, 0, 32, 0xaaaaaaaa);
1950 buf_set_u32(reg_params
[8].value
, 0, 32, flash_address(bank
, 0, pri_ext
->_unlock2
));
1951 buf_set_u32(reg_params
[9].value
, 0, 32, 0x55555555);
1953 retval
= target_run_algorithm(target
, 0, NULL
, 10, reg_params
,
1954 write_algorithm
->address
,
1955 write_algorithm
->address
+ ((target_code_size
) - 4),
1957 if (retval
!= ERROR_OK
)
1960 status
= buf_get_u32(reg_params
[5].value
, 0, 32);
1961 if (status
!= 0x80) {
1962 LOG_ERROR("flash write block failed status: 0x%" PRIx32
, status
);
1963 retval
= ERROR_FLASH_OPERATION_FAILED
;
1967 buffer
+= thisrun_count
;
1968 address
+= thisrun_count
;
1969 count
-= thisrun_count
;
1972 target_free_all_working_areas(target
);
1974 destroy_reg_param(®_params
[0]);
1975 destroy_reg_param(®_params
[1]);
1976 destroy_reg_param(®_params
[2]);
1977 destroy_reg_param(®_params
[3]);
1978 destroy_reg_param(®_params
[4]);
1979 destroy_reg_param(®_params
[5]);
1980 destroy_reg_param(®_params
[6]);
1981 destroy_reg_param(®_params
[7]);
1982 destroy_reg_param(®_params
[8]);
1983 destroy_reg_param(®_params
[9]);
1988 static int cfi_intel_write_word(struct flash_bank
*bank
, uint8_t *word
, uint32_t address
)
1991 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
1992 struct target
*target
= bank
->target
;
1994 cfi_intel_clear_status_register(bank
);
1995 retval
= cfi_send_command(bank
, 0x40, address
);
1996 if (retval
!= ERROR_OK
)
1999 retval
= target_write_memory(target
, address
, bank
->bus_width
, 1, word
);
2000 if (retval
!= ERROR_OK
)
2004 retval
= cfi_intel_wait_status_busy(bank
, cfi_info
->word_write_timeout
, &status
);
2005 if (retval
!= 0x80) {
2006 retval
= cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0));
2007 if (retval
!= ERROR_OK
)
2010 LOG_ERROR("couldn't write word at base 0x%" PRIx32
", address 0x%" PRIx32
,
2011 bank
->base
, address
);
2012 return ERROR_FLASH_OPERATION_FAILED
;
2018 static int cfi_intel_write_words(struct flash_bank
*bank
, const uint8_t *word
,
2019 uint32_t wordcount
, uint32_t address
)
2022 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2023 struct target
*target
= bank
->target
;
2025 /* Calculate buffer size and boundary mask
2026 * buffersize is (buffer size per chip) * (number of chips)
2027 * bufferwsize is buffersize in words */
2028 uint32_t buffersize
=
2029 (1UL << cfi_info
->max_buf_write_size
) * (bank
->bus_width
/ bank
->chip_width
);
2030 uint32_t buffermask
= buffersize
-1;
2031 uint32_t bufferwsize
= buffersize
/ bank
->bus_width
;
2033 /* Check for valid range */
2034 if (address
& buffermask
) {
2035 LOG_ERROR("Write address at base 0x%" PRIx32
", address 0x%" PRIx32
2036 " not aligned to 2^%d boundary",
2037 bank
->base
, address
, cfi_info
->max_buf_write_size
);
2038 return ERROR_FLASH_OPERATION_FAILED
;
2041 /* Check for valid size */
2042 if (wordcount
> bufferwsize
) {
2043 LOG_ERROR("Number of data words %" PRId32
" exceeds available buffersize %" PRId32
,
2044 wordcount
, buffersize
);
2045 return ERROR_FLASH_OPERATION_FAILED
;
2048 /* Write to flash buffer */
2049 cfi_intel_clear_status_register(bank
);
2051 /* Initiate buffer operation _*/
2052 retval
= cfi_send_command(bank
, 0xe8, address
);
2053 if (retval
!= ERROR_OK
)
2056 retval
= cfi_intel_wait_status_busy(bank
, cfi_info
->buf_write_timeout
, &status
);
2057 if (retval
!= ERROR_OK
)
2059 if (status
!= 0x80) {
2060 retval
= cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0));
2061 if (retval
!= ERROR_OK
)
2065 "couldn't start buffer write operation at base 0x%" PRIx32
", address 0x%" PRIx32
,
2068 return ERROR_FLASH_OPERATION_FAILED
;
2071 /* Write buffer wordcount-1 and data words */
2072 retval
= cfi_send_command(bank
, bufferwsize
-1, address
);
2073 if (retval
!= ERROR_OK
)
2076 retval
= target_write_memory(target
, address
, bank
->bus_width
, bufferwsize
, word
);
2077 if (retval
!= ERROR_OK
)
2080 /* Commit write operation */
2081 retval
= cfi_send_command(bank
, 0xd0, address
);
2082 if (retval
!= ERROR_OK
)
2085 retval
= cfi_intel_wait_status_busy(bank
, cfi_info
->buf_write_timeout
, &status
);
2086 if (retval
!= ERROR_OK
)
2089 if (status
!= 0x80) {
2090 retval
= cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0));
2091 if (retval
!= ERROR_OK
)
2094 LOG_ERROR("Buffer write at base 0x%" PRIx32
2095 ", address 0x%" PRIx32
" failed.", bank
->base
, address
);
2096 return ERROR_FLASH_OPERATION_FAILED
;
2102 static int cfi_spansion_write_word(struct flash_bank
*bank
, uint8_t *word
, uint32_t address
)
2105 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2106 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
2107 struct target
*target
= bank
->target
;
2109 retval
= cfi_send_command(bank
, 0xaa, flash_address(bank
, 0, pri_ext
->_unlock1
));
2110 if (retval
!= ERROR_OK
)
2113 retval
= cfi_send_command(bank
, 0x55, flash_address(bank
, 0, pri_ext
->_unlock2
));
2114 if (retval
!= ERROR_OK
)
2117 retval
= cfi_send_command(bank
, 0xa0, flash_address(bank
, 0, pri_ext
->_unlock1
));
2118 if (retval
!= ERROR_OK
)
2121 retval
= target_write_memory(target
, address
, bank
->bus_width
, 1, word
);
2122 if (retval
!= ERROR_OK
)
2125 if (cfi_spansion_wait_status_busy(bank
, cfi_info
->word_write_timeout
) != ERROR_OK
) {
2126 retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0));
2127 if (retval
!= ERROR_OK
)
2130 LOG_ERROR("couldn't write word at base 0x%" PRIx32
2131 ", address 0x%" PRIx32
, bank
->base
, address
);
2132 return ERROR_FLASH_OPERATION_FAILED
;
2138 static int cfi_spansion_write_words(struct flash_bank
*bank
, const uint8_t *word
,
2139 uint32_t wordcount
, uint32_t address
)
2142 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2143 struct target
*target
= bank
->target
;
2144 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
2146 /* Calculate buffer size and boundary mask
2147 * buffersize is (buffer size per chip) * (number of chips)
2148 * bufferwsize is buffersize in words */
2149 uint32_t buffersize
=
2150 (1UL << cfi_info
->max_buf_write_size
) * (bank
->bus_width
/ bank
->chip_width
);
2151 uint32_t buffermask
= buffersize
-1;
2152 uint32_t bufferwsize
= buffersize
/ bank
->bus_width
;
2154 /* Check for valid range */
2155 if (address
& buffermask
) {
2156 LOG_ERROR("Write address at base 0x%" PRIx32
2157 ", address 0x%" PRIx32
" not aligned to 2^%d boundary",
2158 bank
->base
, address
, cfi_info
->max_buf_write_size
);
2159 return ERROR_FLASH_OPERATION_FAILED
;
2162 /* Check for valid size */
2163 if (wordcount
> bufferwsize
) {
2164 LOG_ERROR("Number of data words %" PRId32
" exceeds available buffersize %"
2165 PRId32
, wordcount
, buffersize
);
2166 return ERROR_FLASH_OPERATION_FAILED
;
2170 retval
= cfi_send_command(bank
, 0xaa, flash_address(bank
, 0, pri_ext
->_unlock1
));
2171 if (retval
!= ERROR_OK
)
2174 retval
= cfi_send_command(bank
, 0x55, flash_address(bank
, 0, pri_ext
->_unlock2
));
2175 if (retval
!= ERROR_OK
)
2178 /* Buffer load command */
2179 retval
= cfi_send_command(bank
, 0x25, address
);
2180 if (retval
!= ERROR_OK
)
2183 /* Write buffer wordcount-1 and data words */
2184 retval
= cfi_send_command(bank
, bufferwsize
-1, address
);
2185 if (retval
!= ERROR_OK
)
2188 retval
= target_write_memory(target
, address
, bank
->bus_width
, bufferwsize
, word
);
2189 if (retval
!= ERROR_OK
)
2192 /* Commit write operation */
2193 retval
= cfi_send_command(bank
, 0x29, address
);
2194 if (retval
!= ERROR_OK
)
2197 if (cfi_spansion_wait_status_busy(bank
, cfi_info
->buf_write_timeout
) != ERROR_OK
) {
2198 retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0));
2199 if (retval
!= ERROR_OK
)
2202 LOG_ERROR("couldn't write block at base 0x%" PRIx32
2203 ", address 0x%" PRIx32
", size 0x%" PRIx32
, bank
->base
, address
,
2205 return ERROR_FLASH_OPERATION_FAILED
;
2211 static int cfi_write_word(struct flash_bank
*bank
, uint8_t *word
, uint32_t address
)
2213 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2215 switch (cfi_info
->pri_id
) {
2218 return cfi_intel_write_word(bank
, word
, address
);
2221 return cfi_spansion_write_word(bank
, word
, address
);
2224 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2228 return ERROR_FLASH_OPERATION_FAILED
;
2231 static int cfi_write_words(struct flash_bank
*bank
, const uint8_t *word
,
2232 uint32_t wordcount
, uint32_t address
)
2234 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2236 if (cfi_info
->buf_write_timeout_typ
== 0) {
2237 /* buffer writes are not supported */
2238 LOG_DEBUG("Buffer Writes Not Supported");
2239 return ERROR_FLASH_OPER_UNSUPPORTED
;
2242 switch (cfi_info
->pri_id
) {
2245 return cfi_intel_write_words(bank
, word
, wordcount
, address
);
2248 return cfi_spansion_write_words(bank
, word
, wordcount
, address
);
2251 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2255 return ERROR_FLASH_OPERATION_FAILED
;
2258 static int cfi_read(struct flash_bank
*bank
, uint8_t *buffer
, uint32_t offset
, uint32_t count
)
2260 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2261 struct target
*target
= bank
->target
;
2262 uint32_t address
= bank
->base
+ offset
;
2264 int align
; /* number of unaligned bytes */
2265 uint8_t current_word
[CFI_MAX_BUS_WIDTH
];
2269 LOG_DEBUG("reading buffer of %i byte at 0x%8.8x",
2270 (int)count
, (unsigned)offset
);
2272 if (bank
->target
->state
!= TARGET_HALTED
) {
2273 LOG_ERROR("Target not halted");
2274 return ERROR_TARGET_NOT_HALTED
;
2277 if (offset
+ count
> bank
->size
)
2278 return ERROR_FLASH_DST_OUT_OF_BANK
;
2280 if (cfi_info
->qry
[0] != 'Q')
2281 return ERROR_FLASH_BANK_NOT_PROBED
;
2283 /* start at the first byte of the first word (bus_width size) */
2284 read_p
= address
& ~(bank
->bus_width
- 1);
2285 align
= address
- read_p
;
2287 LOG_INFO("Fixup %d unaligned read head bytes", align
);
2289 /* read a complete word from flash */
2290 retval
= target_read_memory(target
, read_p
, bank
->bus_width
, 1, current_word
);
2291 if (retval
!= ERROR_OK
)
2294 /* take only bytes we need */
2295 for (i
= align
; (i
< bank
->bus_width
) && (count
> 0); i
++, count
--)
2296 *buffer
++ = current_word
[i
];
2298 read_p
+= bank
->bus_width
;
2301 align
= count
/ bank
->bus_width
;
2303 retval
= target_read_memory(target
, read_p
, bank
->bus_width
, align
, buffer
);
2304 if (retval
!= ERROR_OK
)
2307 read_p
+= align
* bank
->bus_width
;
2308 buffer
+= align
* bank
->bus_width
;
2309 count
-= align
* bank
->bus_width
;
2313 LOG_INFO("Fixup %" PRIu32
" unaligned read tail bytes", count
);
2315 /* read a complete word from flash */
2316 retval
= target_read_memory(target
, read_p
, bank
->bus_width
, 1, current_word
);
2317 if (retval
!= ERROR_OK
)
2320 /* take only bytes we need */
2321 for (i
= 0; (i
< bank
->bus_width
) && (count
> 0); i
++, count
--)
2322 *buffer
++ = current_word
[i
];
2328 static int cfi_write(struct flash_bank
*bank
, const uint8_t *buffer
, uint32_t offset
, uint32_t count
)
2330 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2331 struct target
*target
= bank
->target
;
2332 uint32_t address
= bank
->base
+ offset
; /* address of first byte to be programmed */
2334 int align
; /* number of unaligned bytes */
2335 int blk_count
; /* number of bus_width bytes for block copy */
2336 uint8_t current_word
[CFI_MAX_BUS_WIDTH
* 4]; /* word (bus_width size) currently being
2341 if (bank
->target
->state
!= TARGET_HALTED
) {
2342 LOG_ERROR("Target not halted");
2343 return ERROR_TARGET_NOT_HALTED
;
2346 if (offset
+ count
> bank
->size
)
2347 return ERROR_FLASH_DST_OUT_OF_BANK
;
2349 if (cfi_info
->qry
[0] != 'Q')
2350 return ERROR_FLASH_BANK_NOT_PROBED
;
2352 /* start at the first byte of the first word (bus_width size) */
2353 write_p
= address
& ~(bank
->bus_width
- 1);
2354 align
= address
- write_p
;
2356 LOG_INFO("Fixup %d unaligned head bytes", align
);
2358 /* read a complete word from flash */
2359 retval
= target_read_memory(target
, write_p
, bank
->bus_width
, 1, current_word
);
2360 if (retval
!= ERROR_OK
)
2363 /* replace only bytes that must be written */
2364 for (i
= align
; (i
< bank
->bus_width
) && (count
> 0); i
++, count
--)
2365 current_word
[i
] = *buffer
++;
2367 retval
= cfi_write_word(bank
, current_word
, write_p
);
2368 if (retval
!= ERROR_OK
)
2370 write_p
+= bank
->bus_width
;
2373 /* handle blocks of bus_size aligned bytes */
2374 blk_count
= count
& ~(bank
->bus_width
- 1); /* round down, leave tail bytes */
2375 switch (cfi_info
->pri_id
) {
2376 /* try block writes (fails without working area) */
2379 retval
= cfi_intel_write_block(bank
, buffer
, write_p
, blk_count
);
2382 retval
= cfi_spansion_write_block(bank
, buffer
, write_p
, blk_count
);
2385 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2386 retval
= ERROR_FLASH_OPERATION_FAILED
;
2389 if (retval
== ERROR_OK
) {
2390 /* Increment pointers and decrease count on succesful block write */
2391 buffer
+= blk_count
;
2392 write_p
+= blk_count
;
2395 if (retval
== ERROR_TARGET_RESOURCE_NOT_AVAILABLE
) {
2396 /* Calculate buffer size and boundary mask
2397 * buffersize is (buffer size per chip) * (number of chips)
2398 * bufferwsize is buffersize in words */
2399 uint32_t buffersize
=
2401 cfi_info
->max_buf_write_size
) *
2402 (bank
->bus_width
/ bank
->chip_width
);
2403 uint32_t buffermask
= buffersize
-1;
2404 uint32_t bufferwsize
= buffersize
/ bank
->bus_width
;
2406 /* fall back to memory writes */
2407 while (count
>= (uint32_t)bank
->bus_width
) {
2409 if ((write_p
& 0xff) == 0) {
2410 LOG_INFO("Programming at 0x%08" PRIx32
", count 0x%08"
2411 PRIx32
" bytes remaining", write_p
, count
);
2414 if ((bufferwsize
> 0) && (count
>= buffersize
) &&
2415 !(write_p
& buffermask
)) {
2416 retval
= cfi_write_words(bank
, buffer
, bufferwsize
, write_p
);
2417 if (retval
== ERROR_OK
) {
2418 buffer
+= buffersize
;
2419 write_p
+= buffersize
;
2420 count
-= buffersize
;
2422 } else if (retval
!= ERROR_FLASH_OPER_UNSUPPORTED
)
2425 /* try the slow way? */
2427 for (i
= 0; i
< bank
->bus_width
; i
++)
2428 current_word
[i
] = *buffer
++;
2430 retval
= cfi_write_word(bank
, current_word
, write_p
);
2431 if (retval
!= ERROR_OK
)
2434 write_p
+= bank
->bus_width
;
2435 count
-= bank
->bus_width
;
2442 /* return to read array mode, so we can read from flash again for padding */
2443 retval
= cfi_reset(bank
);
2444 if (retval
!= ERROR_OK
)
2447 /* handle unaligned tail bytes */
2449 LOG_INFO("Fixup %" PRId32
" unaligned tail bytes", count
);
2451 /* read a complete word from flash */
2452 retval
= target_read_memory(target
, write_p
, bank
->bus_width
, 1, current_word
);
2453 if (retval
!= ERROR_OK
)
2456 /* replace only bytes that must be written */
2457 for (i
= 0; (i
< bank
->bus_width
) && (count
> 0); i
++, count
--)
2458 current_word
[i
] = *buffer
++;
2460 retval
= cfi_write_word(bank
, current_word
, write_p
);
2461 if (retval
!= ERROR_OK
)
2465 /* return to read array mode */
2466 return cfi_reset(bank
);
2469 static void cfi_fixup_reversed_erase_regions(struct flash_bank
*bank
, const void *param
)
2472 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2473 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
2475 pri_ext
->_reversed_geometry
= 1;
2478 static void cfi_fixup_0002_erase_regions(struct flash_bank
*bank
, const void *param
)
2481 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2482 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
2485 if ((pri_ext
->_reversed_geometry
) || (pri_ext
->TopBottom
== 3)) {
2486 LOG_DEBUG("swapping reversed erase region information on cmdset 0002 device");
2488 for (i
= 0; i
< cfi_info
->num_erase_regions
/ 2; i
++) {
2489 int j
= (cfi_info
->num_erase_regions
- 1) - i
;
2492 swap
= cfi_info
->erase_region_info
[i
];
2493 cfi_info
->erase_region_info
[i
] = cfi_info
->erase_region_info
[j
];
2494 cfi_info
->erase_region_info
[j
] = swap
;
2499 static void cfi_fixup_0002_unlock_addresses(struct flash_bank
*bank
, const void *param
)
2501 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2502 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
2503 const struct cfi_unlock_addresses
*unlock_addresses
= param
;
2505 pri_ext
->_unlock1
= unlock_addresses
->unlock1
;
2506 pri_ext
->_unlock2
= unlock_addresses
->unlock2
;
2509 static void cfi_fixup_0002_polling_bits(struct flash_bank
*bank
, const void *param
)
2511 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2512 const int *status_poll_mask
= param
;
2514 cfi_info
->status_poll_mask
= *status_poll_mask
;
2518 static int cfi_query_string(struct flash_bank
*bank
, int address
)
2520 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2523 retval
= cfi_send_command(bank
, 0x98, flash_address(bank
, 0, address
));
2524 if (retval
!= ERROR_OK
)
2527 retval
= cfi_query_u8(bank
, 0, 0x10, &cfi_info
->qry
[0]);
2528 if (retval
!= ERROR_OK
)
2530 retval
= cfi_query_u8(bank
, 0, 0x11, &cfi_info
->qry
[1]);
2531 if (retval
!= ERROR_OK
)
2533 retval
= cfi_query_u8(bank
, 0, 0x12, &cfi_info
->qry
[2]);
2534 if (retval
!= ERROR_OK
)
2537 LOG_DEBUG("CFI qry returned: 0x%2.2x 0x%2.2x 0x%2.2x",
2538 cfi_info
->qry
[0], cfi_info
->qry
[1], cfi_info
->qry
[2]);
2540 if ((cfi_info
->qry
[0] != 'Q') || (cfi_info
->qry
[1] != 'R') || (cfi_info
->qry
[2] != 'Y')) {
2541 retval
= cfi_reset(bank
);
2542 if (retval
!= ERROR_OK
)
2544 LOG_ERROR("Could not probe bank: no QRY");
2545 return ERROR_FLASH_BANK_INVALID
;
2551 static int cfi_probe(struct flash_bank
*bank
)
2553 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2554 struct target
*target
= bank
->target
;
2555 int num_sectors
= 0;
2558 uint32_t unlock1
= 0x555;
2559 uint32_t unlock2
= 0x2aa;
2561 uint8_t value_buf0
[CFI_MAX_BUS_WIDTH
], value_buf1
[CFI_MAX_BUS_WIDTH
];
2563 if (bank
->target
->state
!= TARGET_HALTED
) {
2564 LOG_ERROR("Target not halted");
2565 return ERROR_TARGET_NOT_HALTED
;
2568 cfi_info
->probed
= 0;
2569 cfi_info
->num_erase_regions
= 0;
2570 if (bank
->sectors
) {
2571 free(bank
->sectors
);
2572 bank
->sectors
= NULL
;
2574 if (cfi_info
->erase_region_info
) {
2575 free(cfi_info
->erase_region_info
);
2576 cfi_info
->erase_region_info
= NULL
;
2579 /* JEDEC standard JESD21C uses 0x5555 and 0x2aaa as unlock addresses,
2580 * while CFI compatible AMD/Spansion flashes use 0x555 and 0x2aa
2582 if (cfi_info
->jedec_probe
) {
2587 /* switch to read identifier codes mode ("AUTOSELECT") */
2588 retval
= cfi_send_command(bank
, 0xaa, flash_address(bank
, 0, unlock1
));
2589 if (retval
!= ERROR_OK
)
2591 retval
= cfi_send_command(bank
, 0x55, flash_address(bank
, 0, unlock2
));
2592 if (retval
!= ERROR_OK
)
2594 retval
= cfi_send_command(bank
, 0x90, flash_address(bank
, 0, unlock1
));
2595 if (retval
!= ERROR_OK
)
2598 retval
= target_read_memory(target
, flash_address(bank
, 0, 0x00),
2599 bank
->bus_width
, 1, value_buf0
);
2600 if (retval
!= ERROR_OK
)
2602 retval
= target_read_memory(target
, flash_address(bank
, 0, 0x01),
2603 bank
->bus_width
, 1, value_buf1
);
2604 if (retval
!= ERROR_OK
)
2606 switch (bank
->chip_width
) {
2608 cfi_info
->manufacturer
= *value_buf0
;
2609 cfi_info
->device_id
= *value_buf1
;
2612 cfi_info
->manufacturer
= target_buffer_get_u16(target
, value_buf0
);
2613 cfi_info
->device_id
= target_buffer_get_u16(target
, value_buf1
);
2616 cfi_info
->manufacturer
= target_buffer_get_u32(target
, value_buf0
);
2617 cfi_info
->device_id
= target_buffer_get_u32(target
, value_buf1
);
2620 LOG_ERROR("Unsupported bank chipwidth %d, can't probe memory",
2622 return ERROR_FLASH_OPERATION_FAILED
;
2625 LOG_INFO("Flash Manufacturer/Device: 0x%04x 0x%04x",
2626 cfi_info
->manufacturer
, cfi_info
->device_id
);
2627 /* switch back to read array mode */
2628 retval
= cfi_reset(bank
);
2629 if (retval
!= ERROR_OK
)
2632 /* check device/manufacturer ID for known non-CFI flashes. */
2633 cfi_fixup_non_cfi(bank
);
2635 /* query only if this is a CFI compatible flash,
2636 * otherwise the relevant info has already been filled in
2638 if (cfi_info
->not_cfi
== 0) {
2639 /* enter CFI query mode
2640 * according to JEDEC Standard No. 68.01,
2641 * a single bus sequence with address = 0x55, data = 0x98 should put
2642 * the device into CFI query mode.
2644 * SST flashes clearly violate this, and we will consider them incompatible for now
2647 retval
= cfi_query_string(bank
, 0x55);
2648 if (retval
!= ERROR_OK
) {
2650 * Spansion S29WS-N CFI query fix is to try 0x555 if 0x55 fails. Should
2651 * be harmless enough:
2653 * http://www.infradead.org/pipermail/linux-mtd/2005-September/013618.html
2655 LOG_USER("Try workaround w/0x555 instead of 0x55 to get QRY.");
2656 retval
= cfi_query_string(bank
, 0x555);
2658 if (retval
!= ERROR_OK
)
2661 retval
= cfi_query_u16(bank
, 0, 0x13, &cfi_info
->pri_id
);
2662 if (retval
!= ERROR_OK
)
2664 retval
= cfi_query_u16(bank
, 0, 0x15, &cfi_info
->pri_addr
);
2665 if (retval
!= ERROR_OK
)
2667 retval
= cfi_query_u16(bank
, 0, 0x17, &cfi_info
->alt_id
);
2668 if (retval
!= ERROR_OK
)
2670 retval
= cfi_query_u16(bank
, 0, 0x19, &cfi_info
->alt_addr
);
2671 if (retval
!= ERROR_OK
)
2674 LOG_DEBUG("qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: "
2675 "0x%4.4x, alt_addr: 0x%4.4x", cfi_info
->qry
[0], cfi_info
->qry
[1],
2676 cfi_info
->qry
[2], cfi_info
->pri_id
, cfi_info
->pri_addr
,
2677 cfi_info
->alt_id
, cfi_info
->alt_addr
);
2679 retval
= cfi_query_u8(bank
, 0, 0x1b, &cfi_info
->vcc_min
);
2680 if (retval
!= ERROR_OK
)
2682 retval
= cfi_query_u8(bank
, 0, 0x1c, &cfi_info
->vcc_max
);
2683 if (retval
!= ERROR_OK
)
2685 retval
= cfi_query_u8(bank
, 0, 0x1d, &cfi_info
->vpp_min
);
2686 if (retval
!= ERROR_OK
)
2688 retval
= cfi_query_u8(bank
, 0, 0x1e, &cfi_info
->vpp_max
);
2689 if (retval
!= ERROR_OK
)
2692 retval
= cfi_query_u8(bank
, 0, 0x1f, &cfi_info
->word_write_timeout_typ
);
2693 if (retval
!= ERROR_OK
)
2695 retval
= cfi_query_u8(bank
, 0, 0x20, &cfi_info
->buf_write_timeout_typ
);
2696 if (retval
!= ERROR_OK
)
2698 retval
= cfi_query_u8(bank
, 0, 0x21, &cfi_info
->block_erase_timeout_typ
);
2699 if (retval
!= ERROR_OK
)
2701 retval
= cfi_query_u8(bank
, 0, 0x22, &cfi_info
->chip_erase_timeout_typ
);
2702 if (retval
!= ERROR_OK
)
2704 retval
= cfi_query_u8(bank
, 0, 0x23, &cfi_info
->word_write_timeout_max
);
2705 if (retval
!= ERROR_OK
)
2707 retval
= cfi_query_u8(bank
, 0, 0x24, &cfi_info
->buf_write_timeout_max
);
2708 if (retval
!= ERROR_OK
)
2710 retval
= cfi_query_u8(bank
, 0, 0x25, &cfi_info
->block_erase_timeout_max
);
2711 if (retval
!= ERROR_OK
)
2713 retval
= cfi_query_u8(bank
, 0, 0x26, &cfi_info
->chip_erase_timeout_max
);
2714 if (retval
!= ERROR_OK
)
2718 retval
= cfi_query_u8(bank
, 0, 0x27, &data
);
2719 if (retval
!= ERROR_OK
)
2721 cfi_info
->dev_size
= 1 << data
;
2723 retval
= cfi_query_u16(bank
, 0, 0x28, &cfi_info
->interface_desc
);
2724 if (retval
!= ERROR_OK
)
2726 retval
= cfi_query_u16(bank
, 0, 0x2a, &cfi_info
->max_buf_write_size
);
2727 if (retval
!= ERROR_OK
)
2729 retval
= cfi_query_u8(bank
, 0, 0x2c, &cfi_info
->num_erase_regions
);
2730 if (retval
!= ERROR_OK
)
2733 LOG_DEBUG("size: 0x%" PRIx32
", interface desc: %i, max buffer write size: 0x%x",
2734 cfi_info
->dev_size
, cfi_info
->interface_desc
,
2735 (1 << cfi_info
->max_buf_write_size
));
2737 if (cfi_info
->num_erase_regions
) {
2738 cfi_info
->erase_region_info
= malloc(sizeof(*cfi_info
->erase_region_info
)
2739 * cfi_info
->num_erase_regions
);
2740 for (i
= 0; i
< cfi_info
->num_erase_regions
; i
++) {
2741 retval
= cfi_query_u32(bank
,
2744 &cfi_info
->erase_region_info
[i
]);
2745 if (retval
!= ERROR_OK
)
2748 "erase region[%i]: %" PRIu32
" blocks of size 0x%" PRIx32
"",
2750 (cfi_info
->erase_region_info
[i
] & 0xffff) + 1,
2751 (cfi_info
->erase_region_info
[i
] >> 16) * 256);
2754 cfi_info
->erase_region_info
= NULL
;
2756 /* We need to read the primary algorithm extended query table before calculating
2757 * the sector layout to be able to apply fixups
2759 switch (cfi_info
->pri_id
) {
2760 /* Intel command set (standard and extended) */
2763 cfi_read_intel_pri_ext(bank
);
2765 /* AMD/Spansion, Atmel, ... command set */
2767 cfi_info
->status_poll_mask
= CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7
; /*
2774 cfi_read_0002_pri_ext(bank
);
2777 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2781 /* return to read array mode
2782 * we use both reset commands, as some Intel flashes fail to recognize the 0xF0 command
2784 retval
= cfi_reset(bank
);
2785 if (retval
!= ERROR_OK
)
2787 } /* end CFI case */
2789 LOG_DEBUG("Vcc min: %x.%x, Vcc max: %x.%x, Vpp min: %u.%x, Vpp max: %u.%x",
2790 (cfi_info
->vcc_min
& 0xf0) >> 4, cfi_info
->vcc_min
& 0x0f,
2791 (cfi_info
->vcc_max
& 0xf0) >> 4, cfi_info
->vcc_max
& 0x0f,
2792 (cfi_info
->vpp_min
& 0xf0) >> 4, cfi_info
->vpp_min
& 0x0f,
2793 (cfi_info
->vpp_max
& 0xf0) >> 4, cfi_info
->vpp_max
& 0x0f);
2795 LOG_DEBUG("typ. word write timeout: %u us, typ. buf write timeout: %u us, "
2796 "typ. block erase timeout: %u ms, typ. chip erase timeout: %u ms",
2797 1 << cfi_info
->word_write_timeout_typ
, 1 << cfi_info
->buf_write_timeout_typ
,
2798 1 << cfi_info
->block_erase_timeout_typ
, 1 << cfi_info
->chip_erase_timeout_typ
);
2800 LOG_DEBUG("max. word write timeout: %u us, max. buf write timeout: %u us, "
2801 "max. block erase timeout: %u ms, max. chip erase timeout: %u ms",
2802 (1 << cfi_info
->word_write_timeout_max
) * (1 << cfi_info
->word_write_timeout_typ
),
2803 (1 << cfi_info
->buf_write_timeout_max
) * (1 << cfi_info
->buf_write_timeout_typ
),
2804 (1 << cfi_info
->block_erase_timeout_max
) * (1 << cfi_info
->block_erase_timeout_typ
),
2805 (1 << cfi_info
->chip_erase_timeout_max
) * (1 << cfi_info
->chip_erase_timeout_typ
));
2807 /* convert timeouts to real values in ms */
2808 cfi_info
->word_write_timeout
= DIV_ROUND_UP((1L << cfi_info
->word_write_timeout_typ
) *
2809 (1L << cfi_info
->word_write_timeout_max
), 1000);
2810 cfi_info
->buf_write_timeout
= DIV_ROUND_UP((1L << cfi_info
->buf_write_timeout_typ
) *
2811 (1L << cfi_info
->buf_write_timeout_max
), 1000);
2812 cfi_info
->block_erase_timeout
= (1L << cfi_info
->block_erase_timeout_typ
) *
2813 (1L << cfi_info
->block_erase_timeout_max
);
2814 cfi_info
->chip_erase_timeout
= (1L << cfi_info
->chip_erase_timeout_typ
) *
2815 (1L << cfi_info
->chip_erase_timeout_max
);
2817 LOG_DEBUG("calculated word write timeout: %u ms, buf write timeout: %u ms, "
2818 "block erase timeout: %u ms, chip erase timeout: %u ms",
2819 cfi_info
->word_write_timeout
, cfi_info
->buf_write_timeout
,
2820 cfi_info
->block_erase_timeout
, cfi_info
->chip_erase_timeout
);
2822 /* apply fixups depending on the primary command set */
2823 switch (cfi_info
->pri_id
) {
2824 /* Intel command set (standard and extended) */
2827 cfi_fixup(bank
, cfi_0001_fixups
);
2829 /* AMD/Spansion, Atmel, ... command set */
2831 cfi_fixup(bank
, cfi_0002_fixups
);
2834 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2838 if ((cfi_info
->dev_size
* bank
->bus_width
/ bank
->chip_width
) != bank
->size
) {
2839 LOG_WARNING("configuration specifies 0x%" PRIx32
" size, but a 0x%" PRIx32
2840 " size flash was found", bank
->size
, cfi_info
->dev_size
);
2843 if (cfi_info
->num_erase_regions
== 0) {
2844 /* a device might have only one erase block, spanning the whole device */
2845 bank
->num_sectors
= 1;
2846 bank
->sectors
= malloc(sizeof(struct flash_sector
));
2848 bank
->sectors
[sector
].offset
= 0x0;
2849 bank
->sectors
[sector
].size
= bank
->size
;
2850 bank
->sectors
[sector
].is_erased
= -1;
2851 bank
->sectors
[sector
].is_protected
= -1;
2853 uint32_t offset
= 0;
2855 for (i
= 0; i
< cfi_info
->num_erase_regions
; i
++)
2856 num_sectors
+= (cfi_info
->erase_region_info
[i
] & 0xffff) + 1;
2858 bank
->num_sectors
= num_sectors
;
2859 bank
->sectors
= malloc(sizeof(struct flash_sector
) * num_sectors
);
2861 for (i
= 0; i
< cfi_info
->num_erase_regions
; i
++) {
2863 for (j
= 0; j
< (cfi_info
->erase_region_info
[i
] & 0xffff) + 1; j
++) {
2864 bank
->sectors
[sector
].offset
= offset
;
2865 bank
->sectors
[sector
].size
=
2866 ((cfi_info
->erase_region_info
[i
] >> 16) * 256)
2867 * bank
->bus_width
/ bank
->chip_width
;
2868 offset
+= bank
->sectors
[sector
].size
;
2869 bank
->sectors
[sector
].is_erased
= -1;
2870 bank
->sectors
[sector
].is_protected
= -1;
2874 if (offset
!= (cfi_info
->dev_size
* bank
->bus_width
/ bank
->chip_width
)) {
2876 "CFI size is 0x%" PRIx32
", but total sector size is 0x%" PRIx32
"", \
2877 (cfi_info
->dev_size
* bank
->bus_width
/ bank
->chip_width
),
2882 cfi_info
->probed
= 1;
2887 static int cfi_auto_probe(struct flash_bank
*bank
)
2889 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2890 if (cfi_info
->probed
)
2892 return cfi_probe(bank
);
2895 static int cfi_intel_protect_check(struct flash_bank
*bank
)
2898 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2899 struct cfi_intel_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
2902 /* check if block lock bits are supported on this device */
2903 if (!(pri_ext
->blk_status_reg_mask
& 0x1))
2904 return ERROR_FLASH_OPERATION_FAILED
;
2906 retval
= cfi_send_command(bank
, 0x90, flash_address(bank
, 0, 0x55));
2907 if (retval
!= ERROR_OK
)
2910 for (i
= 0; i
< bank
->num_sectors
; i
++) {
2911 uint8_t block_status
;
2912 retval
= cfi_get_u8(bank
, i
, 0x2, &block_status
);
2913 if (retval
!= ERROR_OK
)
2916 if (block_status
& 1)
2917 bank
->sectors
[i
].is_protected
= 1;
2919 bank
->sectors
[i
].is_protected
= 0;
2922 return cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0));
2925 static int cfi_spansion_protect_check(struct flash_bank
*bank
)
2928 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2929 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
2932 retval
= cfi_send_command(bank
, 0xaa, flash_address(bank
, 0, pri_ext
->_unlock1
));
2933 if (retval
!= ERROR_OK
)
2936 retval
= cfi_send_command(bank
, 0x55, flash_address(bank
, 0, pri_ext
->_unlock2
));
2937 if (retval
!= ERROR_OK
)
2940 retval
= cfi_send_command(bank
, 0x90, flash_address(bank
, 0, pri_ext
->_unlock1
));
2941 if (retval
!= ERROR_OK
)
2944 for (i
= 0; i
< bank
->num_sectors
; i
++) {
2945 uint8_t block_status
;
2946 retval
= cfi_get_u8(bank
, i
, 0x2, &block_status
);
2947 if (retval
!= ERROR_OK
)
2950 if (block_status
& 1)
2951 bank
->sectors
[i
].is_protected
= 1;
2953 bank
->sectors
[i
].is_protected
= 0;
2956 return cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0));
2959 static int cfi_protect_check(struct flash_bank
*bank
)
2961 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2963 if (bank
->target
->state
!= TARGET_HALTED
) {
2964 LOG_ERROR("Target not halted");
2965 return ERROR_TARGET_NOT_HALTED
;
2968 if (cfi_info
->qry
[0] != 'Q')
2969 return ERROR_FLASH_BANK_NOT_PROBED
;
2971 switch (cfi_info
->pri_id
) {
2974 return cfi_intel_protect_check(bank
);
2977 return cfi_spansion_protect_check(bank
);
2980 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2987 static int get_cfi_info(struct flash_bank
*bank
, char *buf
, int buf_size
)
2990 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2992 if (cfi_info
->qry
[0] == 0xff) {
2993 snprintf(buf
, buf_size
, "\ncfi flash bank not probed yet\n");
2997 if (cfi_info
->not_cfi
== 0)
2998 printed
= snprintf(buf
, buf_size
, "\nCFI flash: ");
3000 printed
= snprintf(buf
, buf_size
, "\nnon-CFI flash: ");
3002 buf_size
-= printed
;
3004 printed
= snprintf(buf
, buf_size
, "mfr: 0x%4.4x, id:0x%4.4x\n\n",
3005 cfi_info
->manufacturer
, cfi_info
->device_id
);
3007 buf_size
-= printed
;
3009 printed
= snprintf(buf
, buf_size
, "qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: "
3010 "0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x\n",
3011 cfi_info
->qry
[0], cfi_info
->qry
[1], cfi_info
->qry
[2],
3012 cfi_info
->pri_id
, cfi_info
->pri_addr
, cfi_info
->alt_id
, cfi_info
->alt_addr
);
3014 buf_size
-= printed
;
3016 printed
= snprintf(buf
, buf_size
, "Vcc min: %x.%x, Vcc max: %x.%x, "
3017 "Vpp min: %u.%x, Vpp max: %u.%x\n",
3018 (cfi_info
->vcc_min
& 0xf0) >> 4, cfi_info
->vcc_min
& 0x0f,
3019 (cfi_info
->vcc_max
& 0xf0) >> 4, cfi_info
->vcc_max
& 0x0f,
3020 (cfi_info
->vpp_min
& 0xf0) >> 4, cfi_info
->vpp_min
& 0x0f,
3021 (cfi_info
->vpp_max
& 0xf0) >> 4, cfi_info
->vpp_max
& 0x0f);
3023 buf_size
-= printed
;
3025 printed
= snprintf(buf
, buf_size
, "typ. word write timeout: %u us, "
3026 "typ. buf write timeout: %u us, "
3027 "typ. block erase timeout: %u ms, "
3028 "typ. chip erase timeout: %u ms\n",
3029 1 << cfi_info
->word_write_timeout_typ
,
3030 1 << cfi_info
->buf_write_timeout_typ
,
3031 1 << cfi_info
->block_erase_timeout_typ
,
3032 1 << cfi_info
->chip_erase_timeout_typ
);
3034 buf_size
-= printed
;
3036 printed
= snprintf(buf
,
3038 "max. word write timeout: %u us, "
3039 "max. buf write timeout: %u us, max. "
3040 "block erase timeout: %u ms, max. chip erase timeout: %u ms\n",
3042 cfi_info
->word_write_timeout_max
) * (1 << cfi_info
->word_write_timeout_typ
),
3044 cfi_info
->buf_write_timeout_max
) * (1 << cfi_info
->buf_write_timeout_typ
),
3046 cfi_info
->block_erase_timeout_max
) *
3047 (1 << cfi_info
->block_erase_timeout_typ
),
3049 cfi_info
->chip_erase_timeout_max
) *
3050 (1 << cfi_info
->chip_erase_timeout_typ
));
3052 buf_size
-= printed
;
3054 printed
= snprintf(buf
, buf_size
, "size: 0x%" PRIx32
", interface desc: %i, "
3055 "max buffer write size: 0x%x\n",
3057 cfi_info
->interface_desc
,
3058 1 << cfi_info
->max_buf_write_size
);
3060 buf_size
-= printed
;
3062 switch (cfi_info
->pri_id
) {
3065 cfi_intel_info(bank
, buf
, buf_size
);
3068 cfi_spansion_info(bank
, buf
, buf_size
);
3071 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
3078 static void cfi_fixup_0002_write_buffer(struct flash_bank
*bank
, const void *param
)
3080 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
3082 /* disable write buffer for M29W128G */
3083 cfi_info
->buf_write_timeout_typ
= 0;
3086 struct flash_driver cfi_flash
= {
3088 .flash_bank_command
= cfi_flash_bank_command
,
3090 .protect
= cfi_protect
,
3094 .auto_probe
= cfi_auto_probe
,
3095 /* FIXME: access flash at bus_width size */
3096 .erase_check
= default_flash_blank_check
,
3097 .protect_check
= cfi_protect_check
,
3098 .info
= get_cfi_info
,