atsamv: Support for ATSAMS70N19 Memory Configuration
[openocd.git] / src / flash / mflash.h
1 /***************************************************************************
2 * Copyright (C) 2007-2008 by unsik Kim <donari75@gmail.com> *
3 * *
4 * This program is free software; you can redistribute it and/or modify *
5 * it under the terms of the GNU General Public License as published by *
6 * the Free Software Foundation; either version 2 of the License, or *
7 * (at your option) any later version. *
8 * *
9 * This program is distributed in the hope that it will be useful, *
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
12 * GNU General Public License for more details. *
13 * *
14 * You should have received a copy of the GNU General Public License *
15 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
16 ***************************************************************************/
17
18 #ifndef OPENOCD_FLASH_MFLASH_H
19 #define OPENOCD_FLASH_MFLASH_H
20
21 struct command_context;
22
23 typedef unsigned long mg_io_uint32;
24 typedef unsigned short mg_io_uint16;
25 typedef unsigned char mg_io_uint8;
26
27 struct mflash_gpio_num {
28 char port[2];
29 signed short num;
30 };
31
32 struct mflash_gpio_drv {
33 const char *name;
34 int (*set_gpio_to_output)(struct mflash_gpio_num gpio);
35 int (*set_gpio_output_val)(struct mflash_gpio_num gpio, uint8_t val);
36 };
37
38 typedef struct _mg_io_type_drv_info {
39
40 mg_io_uint16 general_configuration; /* 00 */
41 mg_io_uint16 number_of_cylinders; /* 01 */
42 mg_io_uint16 reserved1; /* 02 */
43 mg_io_uint16 number_of_heads; /* 03 */
44 mg_io_uint16 unformatted_bytes_per_track; /* 04 */
45 mg_io_uint16 unformatted_bytes_per_sector; /* 05 */
46 mg_io_uint16 sectors_per_track; /* 06 */
47 mg_io_uint16 vendor_unique1[3]; /* 07/08/09 */
48
49 mg_io_uint8 serial_number[20]; /* 10~19 */
50
51 mg_io_uint16 buffer_type; /* 20 */
52 mg_io_uint16 buffer_sector_size; /* 21 */
53 mg_io_uint16 number_of_ecc_bytes; /* 22 */
54
55 mg_io_uint8 firmware_revision[8]; /* 23~26 */
56 mg_io_uint8 model_number[40]; /* 27 */
57
58 mg_io_uint8 maximum_block_transfer; /* 47 low byte */
59 mg_io_uint8 vendor_unique2; /* 47 high byte */
60 mg_io_uint16 dword_io; /* 48 */
61
62 mg_io_uint16 capabilities; /* 49 */
63 mg_io_uint16 reserved2; /* 50 */
64
65 mg_io_uint8 vendor_unique3; /* 51 low byte */
66 mg_io_uint8 pio_cycle_timing_mode; /* 51 high byte */
67 mg_io_uint8 vendor_unique4; /* 52 low byte */
68 mg_io_uint8 dma_cycle_timing_mode; /* 52 high byte */
69 mg_io_uint16 translation_fields_valid; /* 53 (low bit) */
70 mg_io_uint16 number_of_current_cylinders; /* 54 */
71 mg_io_uint16 number_of_current_heads; /* 55 */
72 mg_io_uint16 current_sectors_per_track; /* 56 */
73 mg_io_uint16 current_sector_capacity_lo; /* 57 & 58 */
74 mg_io_uint16 current_sector_capacity_hi; /* 57 & 58 */
75 mg_io_uint8 multi_sector_count; /* 59 low */
76 mg_io_uint8 multi_sector_setting_valid; /* 59 high (low bit) */
77
78 mg_io_uint16 total_user_addressable_sectors_lo; /* 60 & 61 */
79 mg_io_uint16 total_user_addressable_sectors_hi; /* 60 & 61 */
80
81 mg_io_uint8 single_dma_modes_supported; /* 62 low byte */
82 mg_io_uint8 single_dma_transfer_active; /* 62 high byte */
83 mg_io_uint8 multi_dma_modes_supported; /* 63 low byte */
84 mg_io_uint8 multi_dma_transfer_active; /* 63 high byte */
85 mg_io_uint16 adv_pio_mode;
86 mg_io_uint16 min_dma_cyc;
87 mg_io_uint16 recommend_dma_cyc;
88 mg_io_uint16 min_pio_cyc_no_iordy;
89 mg_io_uint16 min_pio_cyc_with_iordy;
90 mg_io_uint8 reserved3[22];
91 mg_io_uint16 major_ver_num;
92 mg_io_uint16 minor_ver_num;
93 mg_io_uint16 feature_cmd_set_suprt0;
94 mg_io_uint16 feature_cmd_set_suprt1;
95 mg_io_uint16 feature_cmd_set_suprt2;
96 mg_io_uint16 feature_cmd_set_en0;
97 mg_io_uint16 feature_cmd_set_en1;
98 mg_io_uint16 feature_cmd_set_en2;
99 mg_io_uint16 reserved4;
100 mg_io_uint16 req_time_for_security_er_done;
101 mg_io_uint16 req_time_for_enhan_security_er_done;
102 mg_io_uint16 adv_pwr_mgm_lvl_val;
103 mg_io_uint16 reserved5;
104 mg_io_uint16 re_of_hw_rst;
105 mg_io_uint8 reserved6[68];
106 mg_io_uint16 security_stas;
107 mg_io_uint8 vendor_uniq_bytes[62];
108 mg_io_uint16 cfa_pwr_mode;
109 mg_io_uint8 reserved7[186];
110
111 mg_io_uint16 scts_per_secure_data_unit;
112 mg_io_uint16 integrity_word;
113
114 } mg_io_type_drv_info;
115
116 typedef struct _mg_pll_t {
117 unsigned int lock_cyc;
118 unsigned short feedback_div; /* 9bit divider */
119 unsigned char input_div; /* 5bit divider */
120 unsigned char output_div; /* 2bit divider */
121 } mg_pll_t;
122
123 struct mg_drv_info {
124 mg_io_type_drv_info drv_id;
125 uint32_t tot_sects;
126 };
127
128 struct mflash_bank {
129 uint32_t base;
130
131 struct mflash_gpio_num rst_pin;
132
133 struct mflash_gpio_drv *gpio_drv;
134 struct target *target;
135 struct mg_drv_info *drv_info;
136 };
137
138 int mflash_register_commands(struct command_context *cmd_ctx);
139
140 #define MG_MFLASH_SECTOR_SIZE (0x200) /* 512Bytes = 2^9 */
141 #define MG_MFLASH_SECTOR_SIZE_MASK (0x200-1)
142 #define MG_MFLASH_SECTOR_SIZE_SHIFT (9)
143
144 #define MG_BUFFER_OFFSET 0x8000
145 #define MG_REG_OFFSET 0xC000
146 #define MG_REG_FEATURE 0x2 /* write case */
147 #define MG_REG_ERROR 0x2 /* read case */
148 #define MG_REG_SECT_CNT 0x4
149 #define MG_REG_SECT_NUM 0x6
150 #define MG_REG_CYL_LOW 0x8
151 #define MG_REG_CYL_HIGH 0xA
152 #define MG_REG_DRV_HEAD 0xC
153 #define MG_REG_COMMAND 0xE /* write case */
154 #define MG_REG_STATUS 0xE /* read case */
155 #define MG_REG_DRV_CTRL 0x10
156 #define MG_REG_BURST_CTRL 0x12
157
158 #define MG_OEM_DISK_WAIT_TIME_LONG 15000 /* msec */
159 #define MG_OEM_DISK_WAIT_TIME_NORMAL 3000 /* msec */
160 #define MG_OEM_DISK_WAIT_TIME_SHORT 1000 /* msec */
161
162 #define MG_PLL_CLK_OUT 66000000.0 /* 66Mhz */
163 #define MG_PLL_MAX_FEEDBACKDIV_VAL 512
164 #define MG_PLL_MAX_INPUTDIV_VAL 32
165 #define MG_PLL_MAX_OUTPUTDIV_VAL 4
166
167 #define MG_PLL_STD_INPUTCLK 12000000.0 /* 12Mhz */
168 #define MG_PLL_STD_LOCKCYCLE 10000
169
170 #define MG_UNLOCK_OTP_AREA 0xFF
171
172 #define MG_FILEIO_CHUNK 1048576
173
174 #define ERROR_MG_IO (-1600)
175 #define ERROR_MG_TIMEOUT (-1601)
176 #define ERROR_MG_INVALID_PLL (-1603)
177 #define ERROR_MG_INTERFACE (-1604)
178 #define ERROR_MG_INVALID_OSC (-1605)
179 #define ERROR_MG_UNSUPPORTED_SOC (-1606)
180
181 typedef enum _mg_io_type_wait {
182
183 mg_io_wait_bsy = 1,
184 mg_io_wait_not_bsy = 2,
185 mg_io_wait_rdy = 3,
186 mg_io_wait_drq = 4, /* wait for data request */
187 mg_io_wait_drq_noerr = 5, /* wait for DRQ but ignore the error status bit */
188 mg_io_wait_rdy_noerr = 6 /* wait for ready, but ignore error status bit */
189
190 } mg_io_type_wait;
191
192 /*= "Status Register" bit masks. */
193 typedef enum _mg_io_type_rbit_status {
194
195 mg_io_rbit_status_error = 0x01, /* error bit in status register */
196 mg_io_rbit_status_corrected_error = 0x04, /* corrected error in status register */
197 mg_io_rbit_status_data_req = 0x08, /* data request bit in status register */
198 mg_io_rbit_status_seek_done = 0x10, /* DSC - Drive Seek Complete */
199 mg_io_rbit_status_write_fault = 0x20, /* DWF - Drive Write Fault */
200 mg_io_rbit_status_ready = 0x40,
201 mg_io_rbit_status_busy = 0x80
202
203 } mg_io_type_rbit_status;
204
205 /*= "Error Register" bit masks. */
206 typedef enum _mg_io_type_rbit_error {
207
208 mg_io_rbit_err_general = 0x01,
209 mg_io_rbit_err_aborted = 0x04,
210 mg_io_rbit_err_bad_sect_num = 0x10,
211 mg_io_rbit_err_uncorrectable = 0x40,
212 mg_io_rbit_err_bad_block = 0x80
213
214 } mg_io_type_rbit_error;
215
216 /* = "Device Control Register" bit. */
217 typedef enum _mg_io_type_rbit_devc {
218
219 mg_io_rbit_devc_intr = 0x02, /* interrupt enable bit (1:disable, 0:enable) */
220 mg_io_rbit_devc_srst = 0x04 /* softwrae reset bit (1:assert, 0:de-assert) */
221
222 } mg_io_type_rbit_devc;
223
224 /* "Drive Select/Head Register" values. */
225 typedef enum _mg_io_type_rval_dev {
226
227 mg_io_rval_dev_must_be_on = 0x80, /* These 1 bits are always on */
228 mg_io_rval_dev_drv_master = (0x00 | mg_io_rval_dev_must_be_on), /* Master */
229 mg_io_rval_dev_drv_slave0 = (0x10 | mg_io_rval_dev_must_be_on), /* Slave0 */
230 mg_io_rval_dev_drv_slave1 = (0x20 | mg_io_rval_dev_must_be_on), /* Slave1 */
231 mg_io_rval_dev_drv_slave2 = (0x30 | mg_io_rval_dev_must_be_on), /* Slave2 */
232 mg_io_rval_dev_lba_mode = (0x40 | mg_io_rval_dev_must_be_on)
233
234 } mg_io_type_rval_dev;
235
236 typedef enum _mg_io_type_cmd {
237 mg_io_cmd_read = 0x20,
238 mg_io_cmd_write = 0x30,
239
240 mg_io_cmd_setmul = 0xC6,
241 mg_io_cmd_readmul = 0xC4,
242 mg_io_cmd_writemul = 0xC5,
243
244 mg_io_cmd_idle = 0x97, /* 0xE3 */
245 mg_io_cmd_idle_immediate = 0x95, /* 0xE1 */
246
247 mg_io_cmd_setsleep = 0x99, /* 0xE6 */
248 mg_io_cmd_stdby = 0x96, /* 0xE2 */
249 mg_io_cmd_stdby_immediate = 0x94, /* 0xE0 */
250
251 mg_io_cmd_identify = 0xEC,
252 mg_io_cmd_set_feature = 0xEF,
253
254 mg_io_cmd_confirm_write = 0x3C,
255 mg_io_cmd_confirm_read = 0x40,
256 mg_io_cmd_wakeup = 0xC3
257
258 } mg_io_type_cmd;
259
260 typedef enum _mg_feature_id {
261 mg_feature_id_transmode = 0x3
262 } mg_feature_id;
263
264 typedef enum _mg_feature_val {
265 mg_feature_val_trans_default = 0x0,
266 mg_feature_val_trans_vcmd = 0x3,
267 mg_feature_val_trand_vcmds = 0x2
268 } mg_feature_val;
269
270 typedef enum _mg_vcmd {
271 mg_vcmd_update_xipinfo = 0xFA, /* FWPATCH commmand through IOM I/O */
272 mg_vcmd_verify_fwpatch = 0xFB, /* FWPATCH commmand through IOM I/O */
273 mg_vcmd_update_stgdrvinfo = 0xFC, /* IOM identificatin info program command */
274 mg_vcmd_prep_fwpatch = 0xFD, /* FWPATCH commmand through IOM I/O */
275 mg_vcmd_exe_fwpatch = 0xFE, /* FWPATCH commmand through IOM I/O */
276 mg_vcmd_wr_pll = 0x8B,
277 mg_vcmd_purge_nand = 0x8C, /* Only for Seagle */
278 mg_vcmd_lock_otp = 0x8D,
279 mg_vcmd_rd_otp = 0x8E,
280 mg_vcmd_wr_otp = 0x8F
281 } mg_vcmd;
282
283 typedef enum _mg_opmode {
284 mg_op_mode_xip = 1, /* TRUE XIP */
285 mg_op_mode_snd = 2, /* BOOT + Storage */
286 mg_op_mode_stg = 0 /* Only Storage */
287 } mg_opmode;
288
289 #endif /* OPENOCD_FLASH_MFLASH_H */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)