X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32w108_stlink.cfg;h=120feea947aabb66e5fb1abedb6d21f71a9c60b6;hb=c7384117c66e8f18896ca09ab8095d6da16bb1e5;hp=c28b9b997271e45a5ccc2a58c654b8cf00e4f640;hpb=f701c0cbeb346df4cda378d3b4d5136aabba3b37;p=openocd.git

diff --git a/tcl/target/stm32w108_stlink.cfg b/tcl/target/stm32w108_stlink.cfg
index c28b9b9972..120feea947 100644
--- a/tcl/target/stm32w108_stlink.cfg
+++ b/tcl/target/stm32w108_stlink.cfg
@@ -1,23 +1,2 @@
-#
-# STM32W108xx stlink pseudo target
-#
-
-if { [info exists CHIPNAME] == 0 } {
-   set CHIPNAME stm32w108
-}
-
-if { [info exists CPUTAPID] == 0 } {
-   set CPUTAPID 0x1ba01477
-}
-
-if { [info exists WORKAREASIZE] == 0 } {
-   # 4k -- This should work for all chips, though perhaps not optimally
-   set WORKAREASIZE 0x1000
-}
-
-source [find target/stm32_stlink.cfg]
-
-# Use the flash driver from the EM357
-set _FLASHNAME $_CHIPNAME.flash
-# 64k (0x10000) of flash
-flash bank $_FLASHNAME em357 0x08000000 0x10000 0 0 $_TARGETNAME
+echo "WARNING: target/stm32w108xx_stlink.cfg is deprecated, please switch to target/stm32w108xx.cfg"
+source [find target/stm32w108xx.cfg]