X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32f2x_stlink.cfg;h=451b2b5e2e625aae6421f2b6848bf3773f81a0dd;hb=8d86633eb7c4cc74c3bf4c19eafa49ae76743c7b;hp=bb113e04e98495e4119e82b18e901b1adbf851f5;hpb=c479f9b50fa18bd23955a78271a3584b5294c236;p=openocd.git

diff --git a/tcl/target/stm32f2x_stlink.cfg b/tcl/target/stm32f2x_stlink.cfg
index bb113e04e9..451b2b5e2e 100644
--- a/tcl/target/stm32f2x_stlink.cfg
+++ b/tcl/target/stm32f2x_stlink.cfg
@@ -1,32 +1,2 @@
-#
-#
-#
-if { [info exists CHIPNAME] } {
-   set _CHIPNAME $CHIPNAME
-} else {
-   set _CHIPNAME stm32
-}
-
-# Work-area is a space in RAM used for flash programming
-# By default use 64kB
-if { [info exists WORKAREASIZE] } {
-   set _WORKAREASIZE $WORKAREASIZE
-} else {
-   set _WORKAREASIZE 0x10000
-}
-
-if { [info exists CPUTAPID] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0x2ba01477
-}
-
-stlink newtap $_CHIPNAME cpu -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME stm32_stlink -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stm32f2x 0x08000000 0 0 0 $_TARGETNAME
+echo "WARNING: target/stm32f2x_stlink.cfg is deprecated, please switch to target/stm32f2x.cfg"
+source [find target/stm32f2x.cfg]