X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Fat91sam9260_ext_RAM_ext_flash.cfg;h=8df2852763131175510809c1852c444bd54cb631;hb=67bb8a6cb208a7529045fc11b1dc30adf98d928f;hp=8acdebd7167822980146213303762f22b685d3d5;hpb=30da7c67cec8b315972377b5389735ff11f6042c;p=openocd.git

diff --git a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
index 8acdebd716..8df2852763 100644
--- a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
+++ b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
@@ -1,48 +1,16 @@
-jtag_rclk 4
-
 ######################################
 # Target:    Atmel AT91SAM9260
 ######################################
 
-if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
-} else {
-   set  _CHIPNAME at91sam9260
-}
-
-if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
-} else {
-   set  _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-  # force an error till we get a good number
-   set _CPUTAPID 0x0792603f
-}
+source [find target/at91sam9261.cfg]
 
 reset_config trst_and_srst
 
+jtag_rclk 4
 
 adapter_nsrst_delay 200
 jtag_ntrst_delay 200
 
-
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-
-######################
-# Target configuration
-######################
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
-
-# Internal sram1 memory
-$_TARGETNAME configure -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1
-
 scan_chain
 $_TARGETNAME configure -event reset-start {
 	# at reset chip runs at 32khz