X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Fboard%2Fzy1000.cfg;h=57deaa8375f327aebfab1f321d1c5e5040e613fe;hb=27473588a40604822dcbee1c1950d27fdf248fe9;hp=ee7afcd4cf99be0ac9db78e5444044f43b1843f3;hpb=da9f72ca0a3305cf6f961834dc441496a36c85de;p=openocd.git

diff --git a/tcl/board/zy1000.cfg b/tcl/board/zy1000.cfg
index ee7afcd4cf..57deaa8375 100644
--- a/tcl/board/zy1000.cfg
+++ b/tcl/board/zy1000.cfg
@@ -24,7 +24,7 @@ if { [info exists ENDIAN] } {
 
 
 #jtag scan chain
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x1f0f0f0f
@@ -63,6 +63,11 @@ $_TARGETNAME configure -event reset-init {
 	mww 0x08020004 0
 }
 
+$_TARGETNAME configure -event gdb-attach {
+	# Without this gdb-attach will first time as probe will fail
+	reset init
+}
+
 # required for usable performance. Used for lots of
 # other things than flash programming.
 $_TARGETNAME configure -work-area-phys 0x00020000 -work-area-size 0x20000 -work-area-backup 0
@@ -80,11 +85,11 @@ proc production_info {} {
 # Progress messages are output via puts
 proc production {firmwarefile serialnumber} {
 	if {[string length $serialnumber]!=12} {
-		puts "Invalid serial number"
+		echo "Invalid serial number"
 		return
 	}
 
-	puts "Power cycling target"
+	echo "Power cycling target"
 	power off
 	sleep 3000
 	power on
@@ -94,10 +99,10 @@ proc production {firmwarefile serialnumber} {
 	verify_image $firmwarefile 0x1000000 bin
 
 	# Big endian... weee!!!!
-	puts "Setting MAC number to $serialnumber"
+	echo "Setting MAC number to $serialnumber"
 	flash fillw [expr 0x1030000-0x8] "0x[string range $serialnumber 2 3][string range $serialnumber 0 1]0000" 1
 	flash fillw [expr 0x1030000-0x4] "0x[string range $serialnumber 10 11][string range $serialnumber 8 9][string range $serialnumber 6 7][string range $serialnumber 4 5]" 1
-	puts "Production successful"
+	echo "Production successful"
 }