X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Fboard%2Fek-lm3s811.cfg;h=d7fe243e64ab9a14233ebc4931b2e453751023e6;hb=d7792a684eb402e9453483513cf77ce1706d6038;hp=0dcc70c2f18da87cfec45c3bed2b7a64efab1a3a;hpb=31b47688ca5015bc91fb3480135a9e4efd53586a;p=openocd.git

diff --git a/tcl/board/ek-lm3s811.cfg b/tcl/board/ek-lm3s811.cfg
index 0dcc70c2f1..d7fe243e64 100644
--- a/tcl/board/ek-lm3s811.cfg
+++ b/tcl/board/ek-lm3s811.cfg
@@ -1,19 +1,15 @@
 #
 # TI/Luminary Stellaris LM3S811 Evaluation Kits
 #
-# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html
+# http://www.ti.com/tool/ek-lm3s811
+#
 
 # NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
 # so is using it in JTAG mode, as done here.
 # NOTE:  older '811-EK boards (before rev C) shouldn't use this.
-source [find interface/luminary.cfg]
+source [find interface/ftdi/luminary.cfg]
 
 # include the target config
+set WORKAREASIZE 0x2000
 set CHIPNAME lm3s811
 source [find target/stellaris.cfg]
-
-
-adapter_nsrst_delay 100
-
-#LM3S811 Evaluation Board has only srst
-reset_config srst_only