X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Fboard%2Fat91rm9200-dk.cfg;h=f484fded1f78faf5c6b6b83c44817a9844426bc6;hb=d7792a684eb402e9453483513cf77ce1706d6038;hp=9a6f89e6fbaf89c2cbfdbae8b2de8b9d7d20a572;hpb=71af49ca7fb11b0bd0c1ba9578826f49288b68ef;p=openocd.git

diff --git a/tcl/board/at91rm9200-dk.cfg b/tcl/board/at91rm9200-dk.cfg
index 9a6f89e6fb..f484fded1f 100644
--- a/tcl/board/at91rm9200-dk.cfg
+++ b/tcl/board/at91rm9200-dk.cfg
@@ -5,17 +5,21 @@
 #
 # It has atmel at91rm9200 chip.
 source [find target/at91rm9200.cfg]
+
+reset_config trst_and_srst
+
 $_TARGETNAME configure -event gdb-attach { reset init }
 $_TARGETNAME configure -event reset-init { at91rm9200_dk_init }
 
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash_bank cfi 0x10000000 0x00200000 2 2 0
+#flash bank <name> <driver> <base> <size> <chip_width> <bus_width> <target>
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x10000000 0x00200000 2 2 $_TARGETNAME
 
 
 proc at91rm9200_dk_init { } {
     # Try to run at 1khz... Yea, that slow!
     # Chip is really running @ 32khz
-    jtag_khz 8
+    adapter_khz 8
 
     mww 0xfffffc64 0xffffffff
     ##  disable all clocks but system clock
@@ -41,7 +45,7 @@ proc at91rm9200_dk_init { } {
     #========================================
     # CPU now runs at 180mhz
     # SYS runs at 60mhz.
-    jtag_khz 40000
+    adapter_khz 40000
     #========================================