X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Fboard%2Fat91cap7a-stk-sdram.cfg;h=95f1d06e2c9c4c9da120f8c18d140ed0bd3a440d;hb=e03eb89cfb7ee7a952bf8536ae1a4e7f2087d766;hp=849d8cf2b9ae44f30c7e171a9f3919c5533b7dc7;hpb=ca45e700b1c57caca2ef08e665e3c7e3e02ac8d3;p=openocd.git

diff --git a/tcl/board/at91cap7a-stk-sdram.cfg b/tcl/board/at91cap7a-stk-sdram.cfg
index 849d8cf2b9..95f1d06e2c 100644
--- a/tcl/board/at91cap7a-stk-sdram.cfg
+++ b/tcl/board/at91cap7a-stk-sdram.cfg
@@ -28,7 +28,7 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM
 
 $_TARGETNAME configure -event reset-start {
 	# start off real slow when we're running off internal RC oscillator
-	jtag_khz 32
+	adapter_khz 32
 }
 
 proc peek32 {address} {
@@ -78,7 +78,7 @@ $_TARGETNAME configure -event reset-init {
 	echo "Master clock ok."
 	
 	# Now that we're up and running, crank up speed!
-	global post_reset_khz ;	jtag_khz $post_reset_khz
+	global post_reset_khz ;	adapter_khz $post_reset_khz
 	
 	echo "Configuring the SDRAM controller..."