X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=src%2Ftarget%2Ftarget%2Flpc2129.cfg;h=a93d4992ffb683366f367075b052de3e0fef376d;hb=503bb08f9993c59a4b3206600555a42fd18459b6;hp=d94f8228da5194240e5b12a6f9371c804f941c4f;hpb=be968a54002b3387e0316c2fcce4ee93da840caa;p=openocd.git

diff --git a/src/target/target/lpc2129.cfg b/src/target/target/lpc2129.cfg
index d94f8228da..a93d4992ff 100644
--- a/src/target/target/lpc2129.cfg
+++ b/src/target/target/lpc2129.cfg
@@ -1,12 +1,36 @@
 #LPC-2129 CPU
-#use combined on interfaces or targets that can’t set TRST/SRST separately
+
+
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME lpc2129
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0xffffffff
+}
+
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst srst_pulls_trst
 #jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
 
-[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
 
 #flash bank <driver> <base> <size> <chip_width> <bus_width>
 flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum