X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=src%2Ftarget%2Ftarget%2Fat91eb40a.cfg;h=b2b91dbcaebf432b81e247e2339a0135ed7d2394;hb=e4218ebb8f7f5bf27578198e16ae5add99edeb75;hp=42ce2f3fca8bd23930080152ce3e4a07d1fbb2a1;hpb=08058e72d9928441a3c52f2107582bd7d373e0f6;p=openocd.git

diff --git a/src/target/target/at91eb40a.cfg b/src/target/target/at91eb40a.cfg
index 42ce2f3fca..b2b91dbcae 100644
--- a/src/target/target/at91eb40a.cfg
+++ b/src/target/target/at91eb40a.cfg
@@ -14,7 +14,7 @@ reset_config srst_only srst_pulls_trst
 jtag_device 4 0x1 0xf 0xe
 
 #target configuration
-target arm7tdmi little 0 arm7tdmi-s_r4
+target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4
 
 # speed up memory downloads
 arm7_9 fast_memory_access enable
@@ -25,16 +25,10 @@ flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
 
 # required for usable performance. Used for lots of
 # other things than flash programming.
-working_area 0 0x00000000 0x20000 nobackup
-
-
-
-global reset_count
-set reset_count 0
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00030000 -work-area-size 0x10000 -work-area-backup 0
 
 [new_target_name] configure -event reset-init {
 	puts "Running reset init script for AT91EB40A"
-	global reset_count
 	# Reset script for AT91EB40a
 	reg cpsr 0x000000D3
 	mww 0xFFE00020 0x1
@@ -43,13 +37,4 @@ set reset_count 0
 	mww 0xFFFFF124 0xFFFFFFFF  
 	mww 0xffff0010 0x100
 	mww 0xffff0034 0x100
-	set reset_count [expr $reset_count+1]
-	echo "Testing reset $reset_count !"
-	
-}
-
-[new_target_name] configure -event reset-start {
-	global reset_count
-	set reset_count [expr $reset_count+1]
-	echo "Testing pre_reset $reset_count !"
 }