X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=src%2Fjtag%2Fdrivers%2Fstlink_usb.c;h=cccb9ffa0b2fbccd3d83d7aef9240171084aeaf5;hb=10df176b0fb932d61f0dc5d6bfd0a0942501fc40;hp=4f9d132764b96a7caf5b31a9cf43a9f65e17f568;hpb=2d8c7c510be09188b6c5446264cd8fcaa9c1e75a;p=openocd.git diff --git a/src/jtag/drivers/stlink_usb.c b/src/jtag/drivers/stlink_usb.c index 4f9d132764..cccb9ffa0b 100644 --- a/src/jtag/drivers/stlink_usb.c +++ b/src/jtag/drivers/stlink_usb.c @@ -2,6 +2,9 @@ * Copyright (C) 2011-2012 by Mathias Kuester * * Mathias Kuester * * * + * Copyright (C) 2012 by Spencer Oliver * + * spen@spen-soft.co.uk * + * * * This code is based on https://github.com/texane/stlink * * * * This program is free software; you can redistribute it and/or modify * @@ -17,7 +20,7 @@ * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. * ***************************************************************************/ #ifdef HAVE_CONFIG_H @@ -27,28 +30,29 @@ /* project specific includes */ #include #include -#include -#include -#include +#include +#include +#include #include #include #include "libusb_common.h" -#define ENDPOINT_IN 0x80 -#define ENDPOINT_OUT 0x00 +#define ENDPOINT_IN 0x80 +#define ENDPOINT_OUT 0x00 -#define STLINK_NULL_EP 0 -#define STLINK_RX_EP (1|ENDPOINT_IN) -#define STLINK_TX_EP (2|ENDPOINT_OUT) -#define STLINK_SG_SIZE (31) -#define STLINK_DATA_SIZE (4*128) -#define STLINK_CMD_SIZE_V2 (16) -#define STLINK_CMD_SIZE_V1 (10) +#define STLINK_NULL_EP 0 +#define STLINK_RX_EP (1|ENDPOINT_IN) +#define STLINK_TX_EP (2|ENDPOINT_OUT) +#define STLINK_TRACE_EP (3|ENDPOINT_IN) +#define STLINK_SG_SIZE (31) +#define STLINK_DATA_SIZE (4*128) +#define STLINK_CMD_SIZE_V2 (16) +#define STLINK_CMD_SIZE_V1 (10) enum stlink_jtag_api_version { - STLINK_JTAG_API_V1 = 0, + STLINK_JTAG_API_V1 = 1, STLINK_JTAG_API_V2, }; @@ -79,7 +83,7 @@ struct stlink_usb_handle_s { /** */ uint8_t databuf[STLINK_DATA_SIZE]; /** */ - enum stlink_transports transport; + enum hl_transports transport; /** */ struct stlink_usb_version version; /** */ @@ -88,72 +92,95 @@ struct stlink_usb_handle_s { uint16_t pid; /** this is the currently used jtag api */ enum stlink_jtag_api_version jtag_api; + /** */ + struct { + /** whether SWO tracing is enabled or not */ + bool enabled; + /** trace data destination file */ + FILE *output_f; + /** trace module source clock (for prescaler) */ + uint32_t source_hz; + /** trace module clock prescaler */ + uint32_t prescale; + } trace; }; -#define STLINK_DEBUG_ERR_OK 0x80 -#define STLINK_DEBUG_ERR_FAULT 0x81 -#define STLINK_CORE_RUNNING 0x80 -#define STLINK_CORE_HALTED 0x81 -#define STLINK_CORE_STAT_UNKNOWN -1 - -#define STLINK_GET_VERSION 0xF1 -#define STLINK_DEBUG_COMMAND 0xF2 -#define STLINK_DFU_COMMAND 0xF3 -#define STLINK_SWIM_COMMAND 0xF4 -#define STLINK_GET_CURRENT_MODE 0xF5 - -#define STLINK_DEV_DFU_MODE 0x00 -#define STLINK_DEV_MASS_MODE 0x01 -#define STLINK_DEV_DEBUG_MODE 0x02 -#define STLINK_DEV_SWIM_MODE 0x03 -#define STLINK_DEV_BOOTLOADER_MODE 0x04 -#define STLINK_DEV_UNKNOWN_MODE -1 - -#define STLINK_DFU_EXIT 0x07 - -#define STLINK_SWIM_ENTER 0x00 -#define STLINK_SWIM_EXIT 0x01 - -#define STLINK_DEBUG_ENTER_JTAG 0x00 -#define STLINK_DEBUG_GETSTATUS 0x01 -#define STLINK_DEBUG_FORCEDEBUG 0x02 -#define STLINK_DEBUG_APIV1_RESETSYS 0x03 -#define STLINK_DEBUG_APIV1_READALLREGS 0x04 -#define STLINK_DEBUG_APIV1_READREG 0x05 -#define STLINK_DEBUG_APIV1_WRITEREG 0x06 -#define STLINK_DEBUG_READMEM_32BIT 0x07 -#define STLINK_DEBUG_WRITEMEM_32BIT 0x08 -#define STLINK_DEBUG_RUNCORE 0x09 -#define STLINK_DEBUG_STEPCORE 0x0a -#define STLINK_DEBUG_APIV1_SETFP 0x0b -#define STLINK_DEBUG_READMEM_8BIT 0x0c -#define STLINK_DEBUG_WRITEMEM_8BIT 0x0d -#define STLINK_DEBUG_APIV1_CLEARFP 0x0e -#define STLINK_DEBUG_APIV1_WRITEDEBUGREG 0x0f -#define STLINK_DEBUG_APIV1_SETWATCHPOINT 0x10 - -#define STLINK_DEBUG_ENTER_JTAG 0x00 -#define STLINK_DEBUG_ENTER_SWD 0xa3 - -#define STLINK_DEBUG_APIV1_ENTER 0x20 -#define STLINK_DEBUG_EXIT 0x21 -#define STLINK_DEBUG_READCOREID 0x22 - -#define STLINK_DEBUG_APIV2_ENTER 0x30 -#define STLINK_DEBUG_APIV2_READ_IDCODES 0x31 -#define STLINK_DEBUG_APIV2_RESETSYS 0x32 -#define STLINK_DEBUG_APIV2_READREG 0x33 -#define STLINK_DEBUG_APIV2_WRITEREG 0x34 -#define STLINK_DEBUG_APIV2_WRITEDEBUGREG 0x35 -#define STLINK_DEBUG_APIV2_READDEBUGREG 0x36 - -#define STLINK_DEBUG_APIV2_READALLREGS 0x3A -#define STLINK_DEBUG_APIV2_GETLASTRWSTATUS 0x3B -#define STLINK_DEBUG_APIV2_DRIVE_NRST 0x3C - -#define STLINK_DEBUG_APIV2_DRIVE_NRST_LOW 0x00 -#define STLINK_DEBUG_APIV2_DRIVE_NRST_HIGH 0x01 -#define STLINK_DEBUG_APIV2_DRIVE_NRST_PULSE 0x02 +#define STLINK_DEBUG_ERR_OK 0x80 +#define STLINK_DEBUG_ERR_FAULT 0x81 +#define STLINK_SWD_AP_WAIT 0x10 +#define STLINK_SWD_DP_WAIT 0x14 + +#define STLINK_CORE_RUNNING 0x80 +#define STLINK_CORE_HALTED 0x81 +#define STLINK_CORE_STAT_UNKNOWN -1 + +#define STLINK_GET_VERSION 0xF1 +#define STLINK_DEBUG_COMMAND 0xF2 +#define STLINK_DFU_COMMAND 0xF3 +#define STLINK_SWIM_COMMAND 0xF4 +#define STLINK_GET_CURRENT_MODE 0xF5 +#define STLINK_GET_TARGET_VOLTAGE 0xF7 + +#define STLINK_DEV_DFU_MODE 0x00 +#define STLINK_DEV_MASS_MODE 0x01 +#define STLINK_DEV_DEBUG_MODE 0x02 +#define STLINK_DEV_SWIM_MODE 0x03 +#define STLINK_DEV_BOOTLOADER_MODE 0x04 +#define STLINK_DEV_UNKNOWN_MODE -1 + +#define STLINK_DFU_EXIT 0x07 + +#define STLINK_SWIM_ENTER 0x00 +#define STLINK_SWIM_EXIT 0x01 + +#define STLINK_DEBUG_ENTER_JTAG 0x00 +#define STLINK_DEBUG_GETSTATUS 0x01 +#define STLINK_DEBUG_FORCEDEBUG 0x02 +#define STLINK_DEBUG_APIV1_RESETSYS 0x03 +#define STLINK_DEBUG_APIV1_READALLREGS 0x04 +#define STLINK_DEBUG_APIV1_READREG 0x05 +#define STLINK_DEBUG_APIV1_WRITEREG 0x06 +#define STLINK_DEBUG_READMEM_32BIT 0x07 +#define STLINK_DEBUG_WRITEMEM_32BIT 0x08 +#define STLINK_DEBUG_RUNCORE 0x09 +#define STLINK_DEBUG_STEPCORE 0x0a +#define STLINK_DEBUG_APIV1_SETFP 0x0b +#define STLINK_DEBUG_READMEM_8BIT 0x0c +#define STLINK_DEBUG_WRITEMEM_8BIT 0x0d +#define STLINK_DEBUG_APIV1_CLEARFP 0x0e +#define STLINK_DEBUG_APIV1_WRITEDEBUGREG 0x0f +#define STLINK_DEBUG_APIV1_SETWATCHPOINT 0x10 + +#define STLINK_DEBUG_ENTER_JTAG 0x00 +#define STLINK_DEBUG_ENTER_SWD 0xa3 + +#define STLINK_DEBUG_APIV1_ENTER 0x20 +#define STLINK_DEBUG_EXIT 0x21 +#define STLINK_DEBUG_READCOREID 0x22 + +#define STLINK_DEBUG_APIV2_ENTER 0x30 +#define STLINK_DEBUG_APIV2_READ_IDCODES 0x31 +#define STLINK_DEBUG_APIV2_RESETSYS 0x32 +#define STLINK_DEBUG_APIV2_READREG 0x33 +#define STLINK_DEBUG_APIV2_WRITEREG 0x34 +#define STLINK_DEBUG_APIV2_WRITEDEBUGREG 0x35 +#define STLINK_DEBUG_APIV2_READDEBUGREG 0x36 + +#define STLINK_DEBUG_APIV2_READALLREGS 0x3A +#define STLINK_DEBUG_APIV2_GETLASTRWSTATUS 0x3B +#define STLINK_DEBUG_APIV2_DRIVE_NRST 0x3C + +#define STLINK_DEBUG_APIV2_START_TRACE_RX 0x40 +#define STLINK_DEBUG_APIV2_STOP_TRACE_RX 0x41 +#define STLINK_DEBUG_APIV2_GET_TRACE_NB 0x42 + +#define STLINK_DEBUG_APIV2_DRIVE_NRST_LOW 0x00 +#define STLINK_DEBUG_APIV2_DRIVE_NRST_HIGH 0x01 +#define STLINK_DEBUG_APIV2_DRIVE_NRST_PULSE 0x02 + +#define STLINK_TRACE_SIZE 1024 +#define STLINK_TRACE_MAX_HZ 2000000 +#define STLINK_TRACE_MIN_VERSION 13 /** */ enum stlink_mode { @@ -165,8 +192,8 @@ enum stlink_mode { STLINK_MODE_DEBUG_SWIM }; -#define REQUEST_SENSE 0x03 -#define REQUEST_SENSE_LENGTH 18 +#define REQUEST_SENSE 0x03 +#define REQUEST_SENSE_LENGTH 18 static void stlink_usb_init_buffer(void *handle, uint8_t direction, uint32_t size); @@ -298,6 +325,26 @@ static int stlink_usb_xfer(void *handle, const uint8_t *buf, int size) return ERROR_OK; } +/** */ +static int stlink_usb_read_trace(void *handle, const uint8_t *buf, int size) +{ + struct stlink_usb_handle_s *h; + + assert(handle != NULL); + + h = (struct stlink_usb_handle_s *)handle; + + assert(h->version.stlink >= 2); + + if (jtag_libusb_bulk_read(h->fd, STLINK_TRACE_EP, (char *)buf, + size, 1000) != size) { + LOG_ERROR("bulk trace read failed"); + return ERROR_FAIL; + } + + return ERROR_OK; +} + /** */ static void stlink_usb_xfer_v1_create_cmd(void *handle, uint8_t direction, uint32_t size) { @@ -400,15 +447,14 @@ static int stlink_usb_version(void *handle) h->pid = buf_get_u32(h->databuf, 32, 16); /* set the supported jtag api version - * V1 doesn't support API V2 at all - * V2 support API V2 since JTAG V13 + * API V2 is supported since JTAG V11 */ - if ((h->version.stlink == 2) && (h->version.jtag > 12)) + if (h->version.jtag >= 11) h->version.jtag_api_max = STLINK_JTAG_API_V2; else h->version.jtag_api_max = STLINK_JTAG_API_V1; - LOG_DEBUG("STLINK v%d JTAG v%d API v%d SWIM v%d VID 0x%04X PID 0x%04X", + LOG_INFO("STLINK v%d JTAG v%d API v%d SWIM v%d VID 0x%04X PID 0x%04X", h->version.stlink, h->version.jtag, (h->version.jtag_api_max == STLINK_JTAG_API_V1) ? 1 : 2, @@ -419,6 +465,40 @@ static int stlink_usb_version(void *handle) return ERROR_OK; } +static int stlink_usb_check_voltage(void *handle, float *target_voltage) +{ + struct stlink_usb_handle_s *h; + uint32_t adc_results[2]; + + h = (struct stlink_usb_handle_s *)handle; + + /* only supported by stlink/v2 and for firmware >= 13 */ + if (h->version.stlink == 1 || h->version.jtag < 13) + return ERROR_COMMAND_NOTFOUND; + + stlink_usb_init_buffer(handle, STLINK_RX_EP, 8); + + h->cmdbuf[h->cmdidx++] = STLINK_GET_TARGET_VOLTAGE; + + int result = stlink_usb_xfer(handle, h->databuf, 8); + + if (result != ERROR_OK) + return result; + + /* convert result */ + adc_results[0] = le_to_h_u32(h->databuf); + adc_results[1] = le_to_h_u32(h->databuf + 4); + + *target_voltage = 0; + + if (adc_results[0]) + *target_voltage = 2 * ((float)adc_results[1]) * (float)(1.2 / adc_results[0]); + + LOG_INFO("Target voltage: %f", (double)*target_voltage); + + return ERROR_OK; +} + /** */ static int stlink_usb_current_mode(void *handle, uint8_t *mode) { @@ -539,8 +619,10 @@ static int stlink_usb_mode_leave(void *handle, enum stlink_mode type) return ERROR_OK; } +static int stlink_usb_assert_srst(void *handle, int srst); + /** */ -static int stlink_usb_init_mode(void *handle) +static int stlink_usb_init_mode(void *handle, bool connect_under_reset) { int res; uint8_t mode; @@ -588,17 +670,40 @@ static int stlink_usb_init_mode(void *handle) if (res != ERROR_OK) return res; + /* we check the target voltage here as an aid to debugging connection problems. + * the stlink requires the target Vdd to be connected for reliable debugging. + * this cmd is supported in all modes except DFU + */ + if (mode != STLINK_DEV_DFU_MODE) { + + float target_voltage; + + /* check target voltage (if supported) */ + res = stlink_usb_check_voltage(h, &target_voltage); + + if (res != ERROR_OK) { + if (res != ERROR_COMMAND_NOTFOUND) + LOG_ERROR("voltage check failed"); + /* attempt to continue as it is not a catastrophic failure */ + } else { + /* check for a sensible target voltage, operating range is 1.65-5.5v + * according to datasheet */ + if (target_voltage < 1.5) + LOG_ERROR("target voltage may be too low for reliable debugging"); + } + } + LOG_DEBUG("MODE: 0x%02X", mode); /* set selected mode */ switch (h->transport) { - case STLINK_TRANSPORT_SWD: + case HL_TRANSPORT_SWD: emode = STLINK_MODE_DEBUG_SWD; break; - case STLINK_TRANSPORT_JTAG: + case HL_TRANSPORT_JTAG: emode = STLINK_MODE_DEBUG_JTAG; break; - case STLINK_TRANSPORT_SWIM: + case HL_TRANSPORT_SWIM: emode = STLINK_MODE_DEBUG_SWIM; break; default: @@ -611,6 +716,12 @@ static int stlink_usb_init_mode(void *handle) return ERROR_FAIL; } + if (connect_under_reset) { + res = stlink_usb_assert_srst(handle, 0); + if (res != ERROR_OK) + return res; + } + res = stlink_usb_mode_enter(handle, emode); if (res != ERROR_OK) @@ -708,6 +819,42 @@ static int stlink_usb_write_debug_reg(void *handle, uint32_t addr, uint32_t val) return h->databuf[0] == STLINK_DEBUG_ERR_OK ? ERROR_OK : ERROR_FAIL; } +/** */ +static void stlink_usb_trace_read(void *handle) +{ + struct stlink_usb_handle_s *h; + + assert(handle != NULL); + + h = (struct stlink_usb_handle_s *)handle; + + if (h->trace.enabled && h->version.jtag >= STLINK_TRACE_MIN_VERSION) { + int res; + + stlink_usb_init_buffer(handle, STLINK_RX_EP, 10); + + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GET_TRACE_NB; + + res = stlink_usb_xfer(handle, h->databuf, 2); + if (res == ERROR_OK) { + uint8_t buf[STLINK_TRACE_SIZE]; + size_t size = le_to_h_u16(h->databuf); + + if (size > 0) { + size = size < sizeof(buf) ? size : sizeof(buf) - 1; + + res = stlink_usb_read_trace(handle, buf, size); + if (res == ERROR_OK) { + /* Log retrieved trace output */ + if (fwrite(buf, 1, size, h->trace.output_f) > 0) + fflush(h->trace.output_f); + } + } + } + } +} + static enum target_state stlink_usb_v2_get_status(void *handle) { int result; @@ -722,6 +869,8 @@ static enum target_state stlink_usb_v2_get_status(void *handle) else if (status & S_RESET_ST) return TARGET_RESET; + stlink_usb_trace_read(handle); + return TARGET_RUNNING; } @@ -782,6 +931,10 @@ static int stlink_usb_reset(void *handle) LOG_DEBUG("RESET: 0x%08X", h->databuf[0]); + /* the following is not a error under swd (using hardware srst), so return success */ + if (h->databuf[0] == STLINK_SWD_AP_WAIT || h->databuf[0] == STLINK_SWD_DP_WAIT) + return ERROR_OK; + return h->databuf[0] == STLINK_DEBUG_ERR_OK ? ERROR_OK : ERROR_FAIL; } @@ -811,6 +964,132 @@ static int stlink_usb_assert_srst(void *handle, int srst) return h->databuf[0] == STLINK_DEBUG_ERR_OK ? ERROR_OK : ERROR_FAIL; } +/** */ +static int stlink_configure_target_trace_port(void *handle) +{ + int res; + uint32_t reg; + struct stlink_usb_handle_s *h; + + assert(handle != NULL); + + h = (struct stlink_usb_handle_s *)handle; + + /* configure the TPI */ + + /* enable the trace subsystem */ + res = stlink_usb_v2_read_debug_reg(handle, DCB_DEMCR, ®); + if (res != ERROR_OK) + goto out; + res = stlink_usb_write_debug_reg(handle, DCB_DEMCR, TRCENA|reg); + if (res != ERROR_OK) + goto out; + /* set the TPI clock prescaler */ + res = stlink_usb_write_debug_reg(handle, TPI_ACPR, h->trace.prescale); + if (res != ERROR_OK) + goto out; + /* select the pin protocol. The STLinkv2 only supports asynchronous + * UART emulation (NRZ) mode, so that's what we pick. */ + res = stlink_usb_write_debug_reg(handle, TPI_SPPR, 0x02); + if (res != ERROR_OK) + goto out; + /* disable continuous formatting */ + res = stlink_usb_write_debug_reg(handle, TPI_FFCR, (1<<8)); + if (res != ERROR_OK) + goto out; + + /* configure the ITM */ + + /* unlock access to the ITM registers */ + res = stlink_usb_write_debug_reg(handle, ITM_LAR, 0xC5ACCE55); + if (res != ERROR_OK) + goto out; + /* enable trace with ATB ID 1 */ + res = stlink_usb_write_debug_reg(handle, ITM_TCR, (1<<16)|(1<<0)|(1<<2)); + if (res != ERROR_OK) + goto out; + /* trace privilege */ + res = stlink_usb_write_debug_reg(handle, ITM_TPR, 1); + if (res != ERROR_OK) + goto out; + /* trace port enable (port 0) */ + res = stlink_usb_write_debug_reg(handle, ITM_TER, (1<<0)); + if (res != ERROR_OK) + goto out; + + res = ERROR_OK; +out: + return res; +} + +/** */ +static void stlink_usb_trace_disable(void *handle) +{ + int res = ERROR_OK; + struct stlink_usb_handle_s *h; + + assert(handle != NULL); + + h = (struct stlink_usb_handle_s *)handle; + + assert(h->version.jtag >= STLINK_TRACE_MIN_VERSION); + + LOG_DEBUG("Tracing: disable\n"); + + stlink_usb_init_buffer(handle, STLINK_RX_EP, 2); + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_STOP_TRACE_RX; + res = stlink_usb_xfer(handle, h->databuf, 2); + + if (res == ERROR_OK) + h->trace.enabled = false; +} + + +/** */ +static int stlink_usb_trace_enable(void *handle) +{ + int res; + struct stlink_usb_handle_s *h; + + assert(handle != NULL); + + h = (struct stlink_usb_handle_s *)handle; + + if (h->version.jtag >= STLINK_TRACE_MIN_VERSION) { + uint32_t trace_hz; + + res = stlink_configure_target_trace_port(handle); + if (res != ERROR_OK) + LOG_ERROR("Unable to configure tracing on target\n"); + + trace_hz = h->trace.prescale > 0 ? + h->trace.source_hz / (h->trace.prescale + 1) : + h->trace.source_hz; + + stlink_usb_init_buffer(handle, STLINK_RX_EP, 10); + + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; + h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_START_TRACE_RX; + h_u16_to_le(h->cmdbuf+h->cmdidx, (uint16_t)STLINK_TRACE_SIZE); + h->cmdidx += 2; + h_u32_to_le(h->cmdbuf+h->cmdidx, trace_hz); + h->cmdidx += 4; + + res = stlink_usb_xfer(handle, h->databuf, 2); + + if (res == ERROR_OK) { + h->trace.enabled = true; + LOG_DEBUG("Tracing: recording at %uHz\n", trace_hz); + } + } else { + LOG_ERROR("Tracing is not supported by this version."); + res = ERROR_FAIL; + } + + return res; +} + /** */ static int stlink_usb_run(void *handle) { @@ -821,8 +1100,19 @@ static int stlink_usb_run(void *handle) h = (struct stlink_usb_handle_s *)handle; - if (h->jtag_api == STLINK_JTAG_API_V2) - return stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_DEBUGEN); + if (h->jtag_api == STLINK_JTAG_API_V2) { + res = stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_DEBUGEN); + + /* Try to start tracing, if requested */ + if (res == ERROR_OK && h->trace.output_f) { + if (stlink_usb_trace_enable(handle) == ERROR_OK) + LOG_DEBUG("Tracing: enabled\n"); + else + LOG_ERROR("Tracing: enable failed\n"); + } + + return res; + } stlink_usb_init_buffer(handle, STLINK_RX_EP, 2); @@ -847,8 +1137,14 @@ static int stlink_usb_halt(void *handle) h = (struct stlink_usb_handle_s *)handle; - if (h->jtag_api == STLINK_JTAG_API_V2) - return stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_DEBUGEN); + if (h->jtag_api == STLINK_JTAG_API_V2) { + res = stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_DEBUGEN); + + if (res == ERROR_OK && h->trace.enabled) + stlink_usb_trace_disable(handle); + + return res; + } stlink_usb_init_buffer(handle, STLINK_RX_EP, 2); @@ -873,8 +1169,13 @@ static int stlink_usb_step(void *handle) h = (struct stlink_usb_handle_s *)handle; - if (h->jtag_api == STLINK_JTAG_API_V2) - return stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_STEP|C_DEBUGEN); + if (h->jtag_api == STLINK_JTAG_API_V2) { + /* TODO: this emulates the v1 api, it should really use a similar auto mask isr + * that the cortex-m3 currently does. */ + stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_MASKINTS|C_DEBUGEN); + stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_STEP|C_MASKINTS|C_DEBUGEN); + return stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_DEBUGEN); + } stlink_usb_init_buffer(handle, STLINK_RX_EP, 2); @@ -1129,14 +1430,30 @@ static int stlink_usb_write_mem32(void *handle, uint32_t addr, uint16_t len, } /** */ -static int stlink_usb_open(struct stlink_interface_param_s *param, void **fd) +static int stlink_usb_close(void *fd) +{ + struct stlink_usb_handle_s *h; + + h = (struct stlink_usb_handle_s *)fd; + + if (h->fd) + jtag_libusb_close(h->fd); + + free(fd); + + return ERROR_OK; +} + +/** */ +static int stlink_usb_open(struct hl_interface_param_s *param, void **fd) { - int err; + int err, retry_count = 1; struct stlink_usb_handle_s *h; + enum stlink_jtag_api_version api; LOG_DEBUG("stlink_usb_open"); - h = malloc(sizeof(struct stlink_usb_handle_s)); + h = calloc(1, sizeof(struct stlink_usb_handle_s)); if (h == 0) { LOG_DEBUG("malloc failed"); @@ -1145,43 +1462,78 @@ static int stlink_usb_open(struct stlink_interface_param_s *param, void **fd) h->transport = param->transport; + /* set max read/write buffer size in bytes */ + param->max_buffer = 512; + const uint16_t vids[] = { param->vid, 0 }; const uint16_t pids[] = { param->pid, 0 }; LOG_DEBUG("transport: %d vid: 0x%04x pid: 0x%04x", param->transport, param->vid, param->pid); - if (jtag_libusb_open(vids, pids, &h->fd) != ERROR_OK) { - LOG_ERROR("open failed"); - return ERROR_FAIL; - } + /* + On certain host USB configurations(e.g. MacBook Air) + STLINKv2 dongle seems to have its FW in a funky state if, + after plugging it in, you try to use openocd with it more + then once (by launching and closing openocd). In cases like + that initial attempt to read the FW info via + stlink_usb_version will fail and the device has to be reset + in order to become operational. + */ + do { + if (jtag_libusb_open(vids, pids, &h->fd) != ERROR_OK) { + LOG_ERROR("open failed"); + goto error_open; + } - jtag_libusb_set_configuration(h->fd, 0); + jtag_libusb_set_configuration(h->fd, 0); - if (jtag_libusb_claim_interface(h->fd, 0) != ERROR_OK) { - LOG_DEBUG("claim interface failed"); - return ERROR_FAIL; - } + if (jtag_libusb_claim_interface(h->fd, 0) != ERROR_OK) { + LOG_DEBUG("claim interface failed"); + goto error_open; + } - /* wrap version for first read */ - switch (param->pid) { + /* wrap version for first read */ + switch (param->pid) { case 0x3744: h->version.stlink = 1; break; default: h->version.stlink = 2; break; - } + } - /* get the device version */ - err = stlink_usb_version(h); + /* get the device version */ + err = stlink_usb_version(h); - if (err != ERROR_OK) { - LOG_ERROR("read version failed"); - jtag_libusb_close(h->fd); - free(h); - return err; - } + if (err == ERROR_OK) { + break; + } else if (h->version.stlink == 1 || + retry_count == 0) { + LOG_ERROR("read version failed"); + goto error_open; + } else { + err = jtag_libusb_release_interface(h->fd, 0); + if (err != ERROR_OK) { + LOG_ERROR("release interface failed"); + goto error_open; + } + + err = jtag_libusb_reset_device(h->fd); + if (err != ERROR_OK) { + LOG_ERROR("reset device failed"); + goto error_open; + } + + jtag_libusb_close(h->fd); + /* + Give the device one second to settle down and + reenumerate. + */ + usleep(1 * 1000 * 1000); + retry_count--; + } + } while (1); /* compare usb vid/pid */ if ((param->vid != h->vid) || (param->pid != h->pid)) @@ -1193,12 +1545,12 @@ static int stlink_usb_open(struct stlink_interface_param_s *param, void **fd) err = ERROR_OK; switch (h->transport) { - case STLINK_TRANSPORT_SWD: - case STLINK_TRANSPORT_JTAG: + case HL_TRANSPORT_SWD: + case HL_TRANSPORT_JTAG: if (h->version.jtag == 0) err = ERROR_FAIL; break; - case STLINK_TRANSPORT_SWIM: + case HL_TRANSPORT_SWIM: if (h->version.swim == 0) err = ERROR_FAIL; break; @@ -1209,37 +1561,52 @@ static int stlink_usb_open(struct stlink_interface_param_s *param, void **fd) if (err != ERROR_OK) { LOG_ERROR("mode (transport) not supported by device"); - jtag_libusb_close(h->fd); - free(h); - return err; + goto error_open; + } + + api = h->version.jtag_api_max; + + /* check that user has not requested certain api version + * and if they have check it is supported */ + if ((param->api != 0) && (param->api <= h->version.jtag_api_max)) { + api = param->api; + LOG_INFO("using stlink api v%d", api); } /* set the used jtag api, this will default to the newest supported version */ - h->jtag_api = h->version.jtag_api_max; + h->jtag_api = api; + + if (h->jtag_api >= 2 && param->trace_f && param->trace_source_hz > 0) { + uint32_t prescale; + + prescale = param->trace_source_hz > STLINK_TRACE_MAX_HZ ? + (param->trace_source_hz / STLINK_TRACE_MAX_HZ) - 1 : 0; + + h->trace.output_f = param->trace_f; + h->trace.source_hz = param->trace_source_hz; + h->trace.prescale = prescale; + } /* initialize the debug hardware */ - err = stlink_usb_init_mode(h); + err = stlink_usb_init_mode(h, param->connect_under_reset); if (err != ERROR_OK) { LOG_ERROR("init mode failed"); - jtag_libusb_close(h->fd); - free(h); - return err; + goto error_open; } *fd = h; return ERROR_OK; -} -/** */ -static int stlink_usb_close(void *fd) -{ - return ERROR_OK; +error_open: + stlink_usb_close(h); + + return ERROR_FAIL; } /** */ -struct stlink_layout_api_s stlink_usb_layout_api = { +struct hl_layout_api_s stlink_usb_layout_api = { /** */ .open = stlink_usb_open, /** */