X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=src%2Fjtag%2Fdrivers%2Fcmsis_dap_usb.c;h=d87d0c9a596b527b6f8a65f9821665b0e1a5d740;hb=HEAD;hp=6d55392d5a47bccf5fa229a7e5eb846946c50ac0;hpb=fb739651c79722b4bc57c31b3d26bb48840b9118;p=openocd.git
diff --git a/src/jtag/drivers/cmsis_dap_usb.c b/src/jtag/drivers/cmsis_dap_usb.c
deleted file mode 100644
index 6d55392d5a..0000000000
--- a/src/jtag/drivers/cmsis_dap_usb.c
+++ /dev/null
@@ -1,1807 +0,0 @@
-/***************************************************************************
- * Copyright (C) 2016 by Maksym Hilliaka *
- * oter@frozen-team.com *
- * *
- * Copyright (C) 2016 by Phillip Pearson *
- * pp@myelin.co.nz *
- * *
- * Copyright (C) 2014 by Paul Fertser *
- * fercerpav@gmail.com *
- * *
- * Copyright (C) 2013 by mike brown *
- * mike@theshedworks.org.uk *
- * *
- * Copyright (C) 2013 by Spencer Oliver *
- * spen@spen-soft.co.uk *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program. If not, see . *
- ***************************************************************************/
-
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include
-#include
-#include
-#include
-#include
-
-#include
-
-/*
- * See CMSIS-DAP documentation:
- * Version 0.01 - Beta.
- */
-
-/* USB Config */
-
-/* Known vid/pid pairs:
- * VID 0xc251: Keil Software
- * PID 0xf001: LPC-Link-II CMSIS_DAP
- * PID 0xf002: OPEN-SDA CMSIS_DAP (Freedom Board)
- * PID 0x2722: Keil ULINK2 CMSIS-DAP
- *
- * VID 0x0d28: mbed Software
- * PID 0x0204: MBED CMSIS-DAP
- */
-
-#define MAX_USB_IDS 8
-/* vid = pid = 0 marks the end of the list */
-static uint16_t cmsis_dap_vid[MAX_USB_IDS + 1] = { 0 };
-static uint16_t cmsis_dap_pid[MAX_USB_IDS + 1] = { 0 };
-static wchar_t *cmsis_dap_serial;
-static bool swd_mode;
-
-#define PACKET_SIZE (64 + 1) /* 64 bytes plus report id */
-#define USB_TIMEOUT 1000
-
-/* CMSIS-DAP General Commands */
-#define CMD_DAP_INFO 0x00
-#define CMD_DAP_LED 0x01
-#define CMD_DAP_CONNECT 0x02
-#define CMD_DAP_DISCONNECT 0x03
-#define CMD_DAP_WRITE_ABORT 0x08
-#define CMD_DAP_DELAY 0x09
-#define CMD_DAP_RESET_TARGET 0x0A
-
-/* CMD_INFO */
-#define INFO_ID_VENDOR 0x01 /* string */
-#define INFO_ID_PRODUCT 0x02 /* string */
-#define INFO_ID_SERNUM 0x03 /* string */
-#define INFO_ID_FW_VER 0x04 /* string */
-#define INFO_ID_TD_VEND 0x05 /* string */
-#define INFO_ID_TD_NAME 0x06 /* string */
-#define INFO_ID_CAPS 0xf0 /* byte */
-#define INFO_ID_PKT_CNT 0xfe /* byte */
-#define INFO_ID_PKT_SZ 0xff /* short */
-
-#define INFO_CAPS_SWD 0x01
-#define INFO_CAPS_JTAG 0x02
-
-/* CMD_LED */
-#define LED_ID_CONNECT 0x00
-#define LED_ID_RUN 0x01
-
-#define LED_OFF 0x00
-#define LED_ON 0x01
-
-/* CMD_CONNECT */
-#define CONNECT_DEFAULT 0x00
-#define CONNECT_SWD 0x01
-#define CONNECT_JTAG 0x02
-
-/* CMSIS-DAP Common SWD/JTAG Commands */
-#define CMD_DAP_DELAY 0x09
-#define CMD_DAP_SWJ_PINS 0x10
-#define CMD_DAP_SWJ_CLOCK 0x11
-#define CMD_DAP_SWJ_SEQ 0x12
-
-/*
- * PINS
- * Bit 0: SWCLK/TCK
- * Bit 1: SWDIO/TMS
- * Bit 2: TDI
- * Bit 3: TDO
- * Bit 5: nTRST
- * Bit 7: nRESET
- */
-
-#define SWJ_PIN_TCK (1<<0)
-#define SWJ_PIN_TMS (1<<1)
-#define SWJ_PIN_TDI (1<<2)
-#define SWJ_PIN_TDO (1<<3)
-#define SWJ_PIN_TRST (1<<5)
-#define SWJ_PIN_SRST (1<<7)
-
-/* CMSIS-DAP SWD Commands */
-#define CMD_DAP_SWD_CONFIGURE 0x13
-
-/* CMSIS-DAP JTAG Commands */
-#define CMD_DAP_JTAG_SEQ 0x14
-#define CMD_DAP_JTAG_CONFIGURE 0x15
-#define CMD_DAP_JTAG_IDCODE 0x16
-
-/* CMSIS-DAP JTAG sequence info masks */
-/* Number of bits to clock through (0 means 64) */
-#define DAP_JTAG_SEQ_TCK 0x3F
-/* TMS will be set during the sequence if this bit is set */
-#define DAP_JTAG_SEQ_TMS 0x40
-/* TDO output will be captured if this bit is set */
-#define DAP_JTAG_SEQ_TDO 0x80
-
-
-/* CMSIS-DAP Transfer Commands */
-#define CMD_DAP_TFER_CONFIGURE 0x04
-#define CMD_DAP_TFER 0x05
-#define CMD_DAP_TFER_BLOCK 0x06
-#define CMD_DAP_TFER_ABORT 0x07
-
-/* DAP Status Code */
-#define DAP_OK 0
-#define DAP_ERROR 0xFF
-
-/* CMSIS-DAP Vendor Commands
- * None as yet... */
-
-static const char * const info_caps_str[] = {
- "SWD Supported",
- "JTAG Supported"
-};
-
-/* max clock speed (kHz) */
-#define DAP_MAX_CLOCK 5000
-
-struct cmsis_dap {
- hid_device *dev_handle;
- uint16_t packet_size;
- int packet_count;
- uint8_t *packet_buffer;
- uint8_t caps;
- uint8_t mode;
-};
-
-struct pending_transfer_result {
- uint8_t cmd;
- uint32_t data;
- void *buffer;
-};
-
-struct pending_request_block {
- struct pending_transfer_result *transfers;
- int transfer_count;
-};
-
-struct pending_scan_result {
- /** Offset in bytes in the CMD_DAP_JTAG_SEQ response buffer. */
- unsigned first;
- /** Number of bits to read. */
- unsigned length;
- /** Location to store the result */
- uint8_t *buffer;
- /** Offset in the destination buffer */
- unsigned buffer_offset;
-};
-
-/* Up to MIN(packet_count, MAX_PENDING_REQUESTS) requests may be issued
- * until the first response arrives */
-#define MAX_PENDING_REQUESTS 3
-
-/* Pending requests are organized as a FIFO - circular buffer */
-/* Each block in FIFO can contain up to pending_queue_len transfers */
-static int pending_queue_len;
-static struct pending_request_block pending_fifo[MAX_PENDING_REQUESTS];
-static int pending_fifo_put_idx, pending_fifo_get_idx;
-static int pending_fifo_block_count;
-
-/* pointers to buffers that will receive jtag scan results on the next flush */
-#define MAX_PENDING_SCAN_RESULTS 256
-static int pending_scan_result_count;
-static struct pending_scan_result pending_scan_results[MAX_PENDING_SCAN_RESULTS];
-
-/* queued JTAG sequences that will be executed on the next flush */
-#define QUEUED_SEQ_BUF_LEN (cmsis_dap_handle->packet_size - 3)
-static int queued_seq_count;
-static int queued_seq_buf_end;
-static int queued_seq_tdo_ptr;
-static uint8_t queued_seq_buf[1024]; /* TODO: make dynamic / move into cmsis object */
-
-static int queued_retval;
-
-static uint8_t output_pins = SWJ_PIN_SRST | SWJ_PIN_TRST;
-
-static struct cmsis_dap *cmsis_dap_handle;
-
-static int cmsis_dap_usb_open(void)
-{
- hid_device *dev = NULL;
- int i;
- struct hid_device_info *devs, *cur_dev;
- unsigned short target_vid, target_pid;
- bool found = false;
-
- target_vid = 0;
- target_pid = 0;
-
- if (hid_init() != 0) {
- LOG_ERROR("unable to open HIDAPI");
- return ERROR_FAIL;
- }
-
- /*
- * The CMSIS-DAP specification stipulates:
- * "The Product String must contain "CMSIS-DAP" somewhere in the string. This is used by the
- * debuggers to identify a CMSIS-DAP compliant Debug Unit that is connected to a host computer."
- */
- devs = hid_enumerate(0x0, 0x0);
- cur_dev = devs;
- while (NULL != cur_dev) {
- if (0 == cmsis_dap_vid[0]) {
- if (NULL == cur_dev->product_string) {
- LOG_DEBUG("Cannot read product string of device 0x%x:0x%x",
- cur_dev->vendor_id, cur_dev->product_id);
- } else {
- if (wcsstr(cur_dev->product_string, L"CMSIS-DAP")) {
- /* if the user hasn't specified VID:PID *and*
- * product string contains "CMSIS-DAP", pick it
- */
- found = true;
- }
- }
- } else {
- /* otherwise, exhaustively compare against all VID:PID in list */
- for (i = 0; cmsis_dap_vid[i] || cmsis_dap_pid[i]; i++) {
- if ((cmsis_dap_vid[i] == cur_dev->vendor_id) && (cmsis_dap_pid[i] == cur_dev->product_id))
- found = true;
- }
-
- if (cmsis_dap_vid[i] || cmsis_dap_pid[i])
- found = true;
- }
-
- /* LPC-LINK2 has cmsis-dap on interface 0 and other HID functions on other interfaces */
- if (cur_dev->vendor_id == 0x1fc9 && cur_dev->product_id == 0x0090 && cur_dev->interface_number != 0)
- found = false;
-
- if (found) {
- /* we have found an adapter, so exit further checks */
- /* check serial number matches if given */
- if (cmsis_dap_serial != NULL) {
- if ((cur_dev->serial_number != NULL) && wcscmp(cmsis_dap_serial, cur_dev->serial_number) == 0) {
- break;
- }
- } else
- break;
-
- found = false;
- }
-
- cur_dev = cur_dev->next;
- }
-
- if (NULL != cur_dev) {
- target_vid = cur_dev->vendor_id;
- target_pid = cur_dev->product_id;
- }
-
- if (target_vid == 0 && target_pid == 0) {
- LOG_ERROR("unable to find CMSIS-DAP device");
- hid_free_enumeration(devs);
- return ERROR_FAIL;
- }
-
- dev = hid_open_path(cur_dev->path);
- hid_free_enumeration(devs);
-
- if (dev == NULL) {
- LOG_ERROR("unable to open CMSIS-DAP device 0x%x:0x%x", target_vid, target_pid);
- return ERROR_FAIL;
- }
-
- struct cmsis_dap *dap = malloc(sizeof(struct cmsis_dap));
- if (dap == NULL) {
- LOG_ERROR("unable to allocate memory");
- return ERROR_FAIL;
- }
-
- dap->dev_handle = dev;
- dap->caps = 0;
- dap->mode = 0;
-
- cmsis_dap_handle = dap;
-
- /* allocate default packet buffer, may be changed later.
- * currently with HIDAPI we have no way of getting the output report length
- * without this info we cannot communicate with the adapter.
- * For the moment we ahve to hard code the packet size */
-
- int packet_size = PACKET_SIZE;
-
- /* atmel cmsis-dap uses 512 byte reports */
- /* except when it doesn't e.g. with mEDBG on SAMD10 Xplained
- * board */
- /* TODO: HID report descriptor should be parsed instead of
- * hardcoding a match by VID */
- if (target_vid == 0x03eb && target_pid != 0x2145 && target_pid != 0x2175)
- packet_size = 512 + 1;
-
- cmsis_dap_handle->packet_buffer = malloc(packet_size);
- cmsis_dap_handle->packet_size = packet_size;
-
- if (cmsis_dap_handle->packet_buffer == NULL) {
- LOG_ERROR("unable to allocate memory");
- return ERROR_FAIL;
- }
-
- return ERROR_OK;
-}
-
-static void cmsis_dap_usb_close(struct cmsis_dap *dap)
-{
- hid_close(dap->dev_handle);
- hid_exit();
-
- free(cmsis_dap_handle->packet_buffer);
- free(cmsis_dap_handle);
- cmsis_dap_handle = NULL;
- free(cmsis_dap_serial);
- cmsis_dap_serial = NULL;
-
- for (int i = 0; i < MAX_PENDING_REQUESTS; i++) {
- free(pending_fifo[i].transfers);
- pending_fifo[i].transfers = NULL;
- }
-}
-
-static int cmsis_dap_usb_write(struct cmsis_dap *dap, int txlen)
-{
-#ifdef CMSIS_DAP_JTAG_DEBUG
- LOG_DEBUG("cmsis-dap usb xfer cmd=%02X", dap->packet_buffer[1]);
-#endif
- /* Pad the rest of the TX buffer with 0's */
- memset(dap->packet_buffer + txlen, 0, dap->packet_size - txlen);
-
- /* write data to device */
- int retval = hid_write(dap->dev_handle, dap->packet_buffer, dap->packet_size);
- if (retval == -1) {
- LOG_ERROR("error writing data: %ls", hid_error(dap->dev_handle));
- return ERROR_FAIL;
- }
-
- return ERROR_OK;
-}
-
-/* Send a message and receive the reply */
-static int cmsis_dap_usb_xfer(struct cmsis_dap *dap, int txlen)
-{
- if (pending_fifo_block_count) {
- LOG_ERROR("pending %d blocks, flushing", pending_fifo_block_count);
- while (pending_fifo_block_count) {
- hid_read_timeout(dap->dev_handle, dap->packet_buffer, dap->packet_size, 10);
- pending_fifo_block_count--;
- }
- pending_fifo_put_idx = 0;
- pending_fifo_get_idx = 0;
- }
-
- int retval = cmsis_dap_usb_write(dap, txlen);
- if (retval != ERROR_OK)
- return retval;
-
- /* get reply */
- retval = hid_read_timeout(dap->dev_handle, dap->packet_buffer, dap->packet_size, USB_TIMEOUT);
- if (retval == -1 || retval == 0) {
- LOG_DEBUG("error reading data: %ls", hid_error(dap->dev_handle));
- return ERROR_FAIL;
- }
-
- return ERROR_OK;
-}
-
-static int cmsis_dap_cmd_DAP_SWJ_Pins(uint8_t pins, uint8_t mask, uint32_t delay, uint8_t *input)
-{
- int retval;
- uint8_t *buffer = cmsis_dap_handle->packet_buffer;
-
- buffer[0] = 0; /* report number */
- buffer[1] = CMD_DAP_SWJ_PINS;
- buffer[2] = pins;
- buffer[3] = mask;
- buffer[4] = delay & 0xff;
- buffer[5] = (delay >> 8) & 0xff;
- buffer[6] = (delay >> 16) & 0xff;
- buffer[7] = (delay >> 24) & 0xff;
- retval = cmsis_dap_usb_xfer(cmsis_dap_handle, 8);
-
- if (retval != ERROR_OK) {
- LOG_ERROR("CMSIS-DAP command CMD_DAP_SWJ_PINS failed.");
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- if (input)
- *input = buffer[1];
-
- return ERROR_OK;
-}
-
-static int cmsis_dap_cmd_DAP_SWJ_Clock(uint32_t swj_clock)
-{
- int retval;
- uint8_t *buffer = cmsis_dap_handle->packet_buffer;
-
- /* set clock in Hz */
- swj_clock *= 1000;
- buffer[0] = 0; /* report number */
- buffer[1] = CMD_DAP_SWJ_CLOCK;
- buffer[2] = swj_clock & 0xff;
- buffer[3] = (swj_clock >> 8) & 0xff;
- buffer[4] = (swj_clock >> 16) & 0xff;
- buffer[5] = (swj_clock >> 24) & 0xff;
- retval = cmsis_dap_usb_xfer(cmsis_dap_handle, 6);
-
- if (retval != ERROR_OK || buffer[1] != DAP_OK) {
- LOG_ERROR("CMSIS-DAP command CMD_DAP_SWJ_CLOCK failed.");
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- return ERROR_OK;
-}
-
-/* clock a sequence of bits out on TMS, to change JTAG states */
-static int cmsis_dap_cmd_DAP_SWJ_Sequence(uint8_t s_len, const uint8_t *sequence)
-{
- int retval;
- uint8_t *buffer = cmsis_dap_handle->packet_buffer;
-
-#ifdef CMSIS_DAP_JTAG_DEBUG
- LOG_DEBUG("cmsis-dap TMS sequence: len=%d", s_len);
- for (int i = 0; i < DIV_ROUND_UP(s_len, 8); ++i)
- printf("%02X ", sequence[i]);
-
- printf("\n");
-#endif
-
- buffer[0] = 0; /* report number */
- buffer[1] = CMD_DAP_SWJ_SEQ;
- buffer[2] = s_len;
- bit_copy(&buffer[3], 0, sequence, 0, s_len);
-
- retval = cmsis_dap_usb_xfer(cmsis_dap_handle, DIV_ROUND_UP(s_len, 8) + 3);
-
- if (retval != ERROR_OK || buffer[1] != DAP_OK)
- return ERROR_FAIL;
-
- return ERROR_OK;
-}
-
-static int cmsis_dap_cmd_DAP_Info(uint8_t info, uint8_t **data)
-{
- int retval;
- uint8_t *buffer = cmsis_dap_handle->packet_buffer;
-
- buffer[0] = 0; /* report number */
- buffer[1] = CMD_DAP_INFO;
- buffer[2] = info;
- retval = cmsis_dap_usb_xfer(cmsis_dap_handle, 3);
-
- if (retval != ERROR_OK) {
- LOG_ERROR("CMSIS-DAP command CMD_INFO failed.");
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- *data = &(buffer[1]);
-
- return ERROR_OK;
-}
-
-static int cmsis_dap_cmd_DAP_LED(uint8_t led, uint8_t state)
-{
- int retval;
- uint8_t *buffer = cmsis_dap_handle->packet_buffer;
-
- buffer[0] = 0; /* report number */
- buffer[1] = CMD_DAP_LED;
- buffer[2] = led;
- buffer[3] = state;
- retval = cmsis_dap_usb_xfer(cmsis_dap_handle, 4);
-
- if (retval != ERROR_OK || buffer[1] != 0x00) {
- LOG_ERROR("CMSIS-DAP command CMD_LED failed.");
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- return ERROR_OK;
-}
-
-static int cmsis_dap_cmd_DAP_Connect(uint8_t mode)
-{
- int retval;
- uint8_t *buffer = cmsis_dap_handle->packet_buffer;
-
- buffer[0] = 0; /* report number */
- buffer[1] = CMD_DAP_CONNECT;
- buffer[2] = mode;
- retval = cmsis_dap_usb_xfer(cmsis_dap_handle, 3);
-
- if (retval != ERROR_OK) {
- LOG_ERROR("CMSIS-DAP command CMD_CONNECT failed.");
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- if (buffer[1] != mode) {
- LOG_ERROR("CMSIS-DAP failed to connect in mode (%d)", mode);
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- return ERROR_OK;
-}
-
-static int cmsis_dap_cmd_DAP_Disconnect(void)
-{
- int retval;
- uint8_t *buffer = cmsis_dap_handle->packet_buffer;
-
- buffer[0] = 0; /* report number */
- buffer[1] = CMD_DAP_DISCONNECT;
- retval = cmsis_dap_usb_xfer(cmsis_dap_handle, 2);
-
- if (retval != ERROR_OK || buffer[1] != DAP_OK) {
- LOG_ERROR("CMSIS-DAP command CMD_DISCONNECT failed.");
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- return ERROR_OK;
-}
-
-static int cmsis_dap_cmd_DAP_TFER_Configure(uint8_t idle, uint16_t retry_count, uint16_t match_retry)
-{
- int retval;
- uint8_t *buffer = cmsis_dap_handle->packet_buffer;
-
- buffer[0] = 0; /* report number */
- buffer[1] = CMD_DAP_TFER_CONFIGURE;
- buffer[2] = idle;
- buffer[3] = retry_count & 0xff;
- buffer[4] = (retry_count >> 8) & 0xff;
- buffer[5] = match_retry & 0xff;
- buffer[6] = (match_retry >> 8) & 0xff;
- retval = cmsis_dap_usb_xfer(cmsis_dap_handle, 7);
-
- if (retval != ERROR_OK || buffer[1] != DAP_OK) {
- LOG_ERROR("CMSIS-DAP command CMD_TFER_Configure failed.");
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- return ERROR_OK;
-}
-
-static int cmsis_dap_cmd_DAP_SWD_Configure(uint8_t cfg)
-{
- int retval;
- uint8_t *buffer = cmsis_dap_handle->packet_buffer;
-
- buffer[0] = 0; /* report number */
- buffer[1] = CMD_DAP_SWD_CONFIGURE;
- buffer[2] = cfg;
- retval = cmsis_dap_usb_xfer(cmsis_dap_handle, 3);
-
- if (retval != ERROR_OK || buffer[1] != DAP_OK) {
- LOG_ERROR("CMSIS-DAP command CMD_SWD_Configure failed.");
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- return ERROR_OK;
-}
-
-#if 0
-static int cmsis_dap_cmd_DAP_Delay(uint16_t delay_us)
-{
- int retval;
- uint8_t *buffer = cmsis_dap_handle->packet_buffer;
-
- buffer[0] = 0; /* report number */
- buffer[1] = CMD_DAP_DELAY;
- buffer[2] = delay_us & 0xff;
- buffer[3] = (delay_us >> 8) & 0xff;
- retval = cmsis_dap_usb_xfer(cmsis_dap_handle, 4);
-
- if (retval != ERROR_OK || buffer[1] != DAP_OK) {
- LOG_ERROR("CMSIS-DAP command CMD_Delay failed.");
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- return ERROR_OK;
-}
-#endif
-
-static void cmsis_dap_swd_write_from_queue(struct cmsis_dap *dap)
-{
- uint8_t *buffer = dap->packet_buffer;
- struct pending_request_block *block = &pending_fifo[pending_fifo_put_idx];
-
- LOG_DEBUG_IO("Executing %d queued transactions from FIFO index %d", block->transfer_count, pending_fifo_put_idx);
-
- if (queued_retval != ERROR_OK) {
- LOG_DEBUG("Skipping due to previous errors: %d", queued_retval);
- goto skip;
- }
-
- if (block->transfer_count == 0)
- goto skip;
-
- size_t idx = 0;
- buffer[idx++] = 0; /* report number */
- buffer[idx++] = CMD_DAP_TFER;
- buffer[idx++] = 0x00; /* DAP Index */
- buffer[idx++] = block->transfer_count;
-
- for (int i = 0; i < block->transfer_count; i++) {
- struct pending_transfer_result *transfer = &(block->transfers[i]);
- uint8_t cmd = transfer->cmd;
- uint32_t data = transfer->data;
-
- LOG_DEBUG_IO("%s %s reg %x %"PRIx32,
- cmd & SWD_CMD_APnDP ? "AP" : "DP",
- cmd & SWD_CMD_RnW ? "read" : "write",
- (cmd & SWD_CMD_A32) >> 1, data);
-
- /* When proper WAIT handling is implemented in the
- * common SWD framework, this kludge can be
- * removed. However, this might lead to minor
- * performance degradation as the adapter wouldn't be
- * able to automatically retry anything (because ARM
- * has forgotten to implement sticky error flags
- * clearing). See also comments regarding
- * cmsis_dap_cmd_DAP_TFER_Configure() and
- * cmsis_dap_cmd_DAP_SWD_Configure() in
- * cmsis_dap_init().
- */
- if (!(cmd & SWD_CMD_RnW) &&
- !(cmd & SWD_CMD_APnDP) &&
- (cmd & SWD_CMD_A32) >> 1 == DP_CTRL_STAT &&
- (data & CORUNDETECT)) {
- LOG_DEBUG("refusing to enable sticky overrun detection");
- data &= ~CORUNDETECT;
- }
-
- buffer[idx++] = (cmd >> 1) & 0x0f;
- if (!(cmd & SWD_CMD_RnW)) {
- buffer[idx++] = (data) & 0xff;
- buffer[idx++] = (data >> 8) & 0xff;
- buffer[idx++] = (data >> 16) & 0xff;
- buffer[idx++] = (data >> 24) & 0xff;
- }
- }
-
- queued_retval = cmsis_dap_usb_write(dap, idx);
- if (queued_retval != ERROR_OK)
- goto skip;
-
- pending_fifo_put_idx = (pending_fifo_put_idx + 1) % dap->packet_count;
- pending_fifo_block_count++;
- if (pending_fifo_block_count > dap->packet_count)
- LOG_ERROR("too much pending writes %d", pending_fifo_block_count);
-
- return;
-
-skip:
- block->transfer_count = 0;
-}
-
-static void cmsis_dap_swd_read_process(struct cmsis_dap *dap, int timeout_ms)
-{
- uint8_t *buffer = dap->packet_buffer;
- struct pending_request_block *block = &pending_fifo[pending_fifo_get_idx];
-
- if (pending_fifo_block_count == 0)
- LOG_ERROR("no pending write");
-
- /* get reply */
- int retval = hid_read_timeout(dap->dev_handle, dap->packet_buffer, dap->packet_size, timeout_ms);
- if (retval == 0 && timeout_ms < USB_TIMEOUT)
- return;
-
- if (retval == -1 || retval == 0) {
- LOG_DEBUG("error reading data: %ls", hid_error(dap->dev_handle));
- queued_retval = ERROR_FAIL;
- goto skip;
- }
-
- if (buffer[2] & 0x08) {
- LOG_DEBUG("CMSIS-DAP Protocol Error @ %d (wrong parity)", buffer[1]);
- queued_retval = ERROR_FAIL;
- goto skip;
- }
- uint8_t ack = buffer[2] & 0x07;
- if (ack != SWD_ACK_OK) {
- LOG_DEBUG("SWD ack not OK @ %d %s", buffer[1],
- ack == SWD_ACK_WAIT ? "WAIT" : ack == SWD_ACK_FAULT ? "FAULT" : "JUNK");
- queued_retval = ack == SWD_ACK_WAIT ? ERROR_WAIT : ERROR_FAIL;
- goto skip;
- }
-
- if (block->transfer_count != buffer[1])
- LOG_ERROR("CMSIS-DAP transfer count mismatch: expected %d, got %d",
- block->transfer_count, buffer[1]);
-
- LOG_DEBUG_IO("Received results of %d queued transactions FIFO index %d", buffer[1], pending_fifo_get_idx);
- size_t idx = 3;
- for (int i = 0; i < buffer[1]; i++) {
- struct pending_transfer_result *transfer = &(block->transfers[i]);
- if (transfer->cmd & SWD_CMD_RnW) {
- static uint32_t last_read;
- uint32_t data = le_to_h_u32(&buffer[idx]);
- uint32_t tmp = data;
- idx += 4;
-
- LOG_DEBUG_IO("Read result: %"PRIx32, data);
-
- /* Imitate posted AP reads */
- if ((transfer->cmd & SWD_CMD_APnDP) ||
- ((transfer->cmd & SWD_CMD_A32) >> 1 == DP_RDBUFF)) {
- tmp = last_read;
- last_read = data;
- }
-
- if (transfer->buffer)
- *(uint32_t *)(transfer->buffer) = tmp;
- }
- }
-
-skip:
- block->transfer_count = 0;
- pending_fifo_get_idx = (pending_fifo_get_idx + 1) % dap->packet_count;
- pending_fifo_block_count--;
-}
-
-static int cmsis_dap_swd_run_queue(void)
-{
- if (pending_fifo_block_count)
- cmsis_dap_swd_read_process(cmsis_dap_handle, 0);
-
- cmsis_dap_swd_write_from_queue(cmsis_dap_handle);
-
- while (pending_fifo_block_count)
- cmsis_dap_swd_read_process(cmsis_dap_handle, USB_TIMEOUT);
-
- pending_fifo_put_idx = 0;
- pending_fifo_get_idx = 0;
-
- int retval = queued_retval;
- queued_retval = ERROR_OK;
-
- return retval;
-}
-
-static void cmsis_dap_swd_queue_cmd(uint8_t cmd, uint32_t *dst, uint32_t data)
-{
- if (pending_fifo[pending_fifo_put_idx].transfer_count == pending_queue_len) {
- if (pending_fifo_block_count)
- cmsis_dap_swd_read_process(cmsis_dap_handle, 0);
-
- /* Not enough room in the queue. Run the queue. */
- cmsis_dap_swd_write_from_queue(cmsis_dap_handle);
-
- if (pending_fifo_block_count >= cmsis_dap_handle->packet_count)
- cmsis_dap_swd_read_process(cmsis_dap_handle, USB_TIMEOUT);
- }
-
- if (queued_retval != ERROR_OK)
- return;
-
- struct pending_request_block *block = &pending_fifo[pending_fifo_put_idx];
- struct pending_transfer_result *transfer = &(block->transfers[block->transfer_count]);
- transfer->data = data;
- transfer->cmd = cmd;
- if (cmd & SWD_CMD_RnW) {
- /* Queue a read transaction */
- transfer->buffer = dst;
- }
- block->transfer_count++;
-}
-
-static void cmsis_dap_swd_write_reg(uint8_t cmd, uint32_t value, uint32_t ap_delay_clk)
-{
- assert(!(cmd & SWD_CMD_RnW));
- cmsis_dap_swd_queue_cmd(cmd, NULL, value);
-}
-
-static void cmsis_dap_swd_read_reg(uint8_t cmd, uint32_t *value, uint32_t ap_delay_clk)
-{
- assert(cmd & SWD_CMD_RnW);
- cmsis_dap_swd_queue_cmd(cmd, value, 0);
-}
-
-static int cmsis_dap_get_serial_info(void)
-{
- uint8_t *data;
-
- int retval = cmsis_dap_cmd_DAP_Info(INFO_ID_SERNUM, &data);
- if (retval != ERROR_OK)
- return retval;
-
- if (data[0]) /* strlen */
- LOG_INFO("CMSIS-DAP: Serial# = %s", &data[1]);
-
- return ERROR_OK;
-}
-
-static int cmsis_dap_get_version_info(void)
-{
- uint8_t *data;
-
- /* INFO_ID_FW_VER - string */
- int retval = cmsis_dap_cmd_DAP_Info(INFO_ID_FW_VER, &data);
- if (retval != ERROR_OK)
- return retval;
-
- if (data[0]) /* strlen */
- LOG_INFO("CMSIS-DAP: FW Version = %s", &data[1]);
-
- return ERROR_OK;
-}
-
-static int cmsis_dap_get_caps_info(void)
-{
- uint8_t *data;
-
- /* INFO_ID_CAPS - byte */
- int retval = cmsis_dap_cmd_DAP_Info(INFO_ID_CAPS, &data);
- if (retval != ERROR_OK)
- return retval;
-
- if (data[0] == 1) {
- uint8_t caps = data[1];
-
- cmsis_dap_handle->caps = caps;
-
- if (caps & INFO_CAPS_SWD)
- LOG_INFO("CMSIS-DAP: %s", info_caps_str[0]);
- if (caps & INFO_CAPS_JTAG)
- LOG_INFO("CMSIS-DAP: %s", info_caps_str[1]);
- }
-
- return ERROR_OK;
-}
-
-static int cmsis_dap_get_status(void)
-{
- uint8_t d;
-
- int retval = cmsis_dap_cmd_DAP_SWJ_Pins(0, 0, 0, &d);
-
- if (retval == ERROR_OK) {
- LOG_INFO("SWCLK/TCK = %d SWDIO/TMS = %d TDI = %d TDO = %d nTRST = %d nRESET = %d",
- (d & SWJ_PIN_TCK) ? 1 : 0,
- (d & SWJ_PIN_TMS) ? 1 : 0,
- (d & SWJ_PIN_TDI) ? 1 : 0,
- (d & SWJ_PIN_TDO) ? 1 : 0,
- (d & SWJ_PIN_TRST) ? 1 : 0,
- (d & SWJ_PIN_SRST) ? 1 : 0);
- }
-
- return retval;
-}
-
-static int cmsis_dap_swd_switch_seq(enum swd_special_seq seq)
-{
- const uint8_t *s;
- unsigned int s_len;
- int retval;
-
- if ((output_pins & (SWJ_PIN_SRST | SWJ_PIN_TRST)) == (SWJ_PIN_SRST | SWJ_PIN_TRST)) {
- /* Following workaround deasserts reset on most adapters.
- * Do not reconnect if a reset line is active!
- * Reconnecting would break connecting under reset. */
-
- /* First disconnect before connecting, Atmel EDBG needs it for SAMD/R/L/C */
- cmsis_dap_cmd_DAP_Disconnect();
-
- /* When we are reconnecting, DAP_Connect needs to be rerun, at
- * least on Keil ULINK-ME */
- retval = cmsis_dap_cmd_DAP_Connect(CONNECT_SWD);
- if (retval != ERROR_OK)
- return retval;
- }
-
- switch (seq) {
- case LINE_RESET:
- LOG_DEBUG("SWD line reset");
- s = swd_seq_line_reset;
- s_len = swd_seq_line_reset_len;
- break;
- case JTAG_TO_SWD:
- LOG_DEBUG("JTAG-to-SWD");
- s = swd_seq_jtag_to_swd;
- s_len = swd_seq_jtag_to_swd_len;
- break;
- case SWD_TO_JTAG:
- LOG_DEBUG("SWD-to-JTAG");
- s = swd_seq_swd_to_jtag;
- s_len = swd_seq_swd_to_jtag_len;
- break;
- default:
- LOG_ERROR("Sequence %d not supported", seq);
- return ERROR_FAIL;
- }
-
- retval = cmsis_dap_cmd_DAP_SWJ_Sequence(s_len, s);
- if (retval != ERROR_OK)
- return retval;
-
- /* Atmel EDBG needs renew clock setting after SWJ_Sequence
- * otherwise default frequency is used */
- return cmsis_dap_cmd_DAP_SWJ_Clock(jtag_get_speed_khz());
-}
-
-static int cmsis_dap_swd_open(void)
-{
- int retval;
-
- if (!(cmsis_dap_handle->caps & INFO_CAPS_SWD)) {
- LOG_ERROR("CMSIS-DAP: SWD not supported");
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- retval = cmsis_dap_cmd_DAP_Connect(CONNECT_SWD);
- if (retval != ERROR_OK)
- return retval;
-
- /* Add more setup here.??... */
-
- LOG_INFO("CMSIS-DAP: Interface Initialised (SWD)");
- return ERROR_OK;
-}
-
-static int cmsis_dap_init(void)
-{
- int retval;
- uint8_t *data;
-
- retval = cmsis_dap_usb_open();
- if (retval != ERROR_OK)
- return retval;
-
- retval = cmsis_dap_get_caps_info();
- if (retval != ERROR_OK)
- return retval;
-
- retval = cmsis_dap_get_version_info();
- if (retval != ERROR_OK)
- return retval;
-
- retval = cmsis_dap_get_serial_info();
- if (retval != ERROR_OK)
- return retval;
-
- if (swd_mode) {
- retval = cmsis_dap_swd_open();
- if (retval != ERROR_OK)
- return retval;
- } else {
- /* Connect in JTAG mode */
- if (!(cmsis_dap_handle->caps & INFO_CAPS_JTAG)) {
- LOG_ERROR("CMSIS-DAP: JTAG not supported");
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- retval = cmsis_dap_cmd_DAP_Connect(CONNECT_JTAG);
- if (retval != ERROR_OK)
- return retval;
-
- LOG_INFO("CMSIS-DAP: Interface Initialised (JTAG)");
- }
-
- /* Be conservative and suppress submitting multiple HID requests
- * until we get packet count info from the adaptor */
- cmsis_dap_handle->packet_count = 1;
- pending_queue_len = 12;
-
- /* INFO_ID_PKT_SZ - short */
- retval = cmsis_dap_cmd_DAP_Info(INFO_ID_PKT_SZ, &data);
- if (retval != ERROR_OK)
- return retval;
-
- if (data[0] == 2) { /* short */
- uint16_t pkt_sz = data[1] + (data[2] << 8);
-
- /* 4 bytes of command header + 5 bytes per register
- * write. For bulk read sequences just 4 bytes are
- * needed per transfer, so this is suboptimal. */
- pending_queue_len = (pkt_sz - 4) / 5;
-
- if (cmsis_dap_handle->packet_size != pkt_sz + 1) {
- /* reallocate buffer */
- cmsis_dap_handle->packet_size = pkt_sz + 1;
- cmsis_dap_handle->packet_buffer = realloc(cmsis_dap_handle->packet_buffer,
- cmsis_dap_handle->packet_size);
- if (cmsis_dap_handle->packet_buffer == NULL) {
- LOG_ERROR("unable to reallocate memory");
- return ERROR_FAIL;
- }
- }
-
- LOG_DEBUG("CMSIS-DAP: Packet Size = %" PRId16, pkt_sz);
- }
-
- /* INFO_ID_PKT_CNT - byte */
- retval = cmsis_dap_cmd_DAP_Info(INFO_ID_PKT_CNT, &data);
- if (retval != ERROR_OK)
- return retval;
-
- if (data[0] == 1) { /* byte */
- int pkt_cnt = data[1];
- if (pkt_cnt > 1)
- cmsis_dap_handle->packet_count = MIN(MAX_PENDING_REQUESTS, pkt_cnt);
-
- LOG_DEBUG("CMSIS-DAP: Packet Count = %d", pkt_cnt);
- }
-
- LOG_DEBUG("Allocating FIFO for %d pending HID requests", cmsis_dap_handle->packet_count);
- for (int i = 0; i < cmsis_dap_handle->packet_count; i++) {
- pending_fifo[i].transfers = malloc(pending_queue_len * sizeof(struct pending_transfer_result));
- if (!pending_fifo[i].transfers) {
- LOG_ERROR("Unable to allocate memory for CMSIS-DAP queue");
- return ERROR_FAIL;
- }
- }
-
-
- retval = cmsis_dap_get_status();
- if (retval != ERROR_OK)
- return ERROR_FAIL;
-
- /* Now try to connect to the target
- * TODO: This is all SWD only @ present */
- retval = cmsis_dap_cmd_DAP_SWJ_Clock(jtag_get_speed_khz());
- if (retval != ERROR_OK)
- return ERROR_FAIL;
-
- /* Ask CMSIS-DAP to automatically retry on receiving WAIT for
- * up to 64 times. This must be changed to 0 if sticky
- * overrun detection is enabled. */
- retval = cmsis_dap_cmd_DAP_TFER_Configure(0, 64, 0);
- if (retval != ERROR_OK)
- return ERROR_FAIL;
-
- if (swd_mode) {
- /* Data Phase (bit 2) must be set to 1 if sticky overrun
- * detection is enabled */
- retval = cmsis_dap_cmd_DAP_SWD_Configure(0); /* 1 TRN, no Data Phase */
- if (retval != ERROR_OK)
- return ERROR_FAIL;
- }
- /* Both LEDs on */
- retval = cmsis_dap_cmd_DAP_LED(LED_ID_CONNECT, LED_ON);
- if (retval != ERROR_OK)
- return ERROR_FAIL;
-
- retval = cmsis_dap_cmd_DAP_LED(LED_ID_RUN, LED_ON);
- if (retval != ERROR_OK)
- return ERROR_FAIL;
-
- /* support connecting with srst asserted */
- enum reset_types jtag_reset_config = jtag_get_reset_config();
-
- if (jtag_reset_config & RESET_CNCT_UNDER_SRST) {
- if (jtag_reset_config & RESET_SRST_NO_GATING) {
- retval = cmsis_dap_cmd_DAP_SWJ_Pins(0, SWJ_PIN_SRST, 0, NULL);
- if (retval != ERROR_OK)
- return ERROR_FAIL;
- LOG_INFO("Connecting under reset");
- }
- }
- LOG_INFO("CMSIS-DAP: Interface ready");
-
- return ERROR_OK;
-}
-
-static int cmsis_dap_swd_init(void)
-{
- swd_mode = true;
- return ERROR_OK;
-}
-
-static int cmsis_dap_quit(void)
-{
- cmsis_dap_cmd_DAP_Disconnect();
- /* Both LEDs off */
- cmsis_dap_cmd_DAP_LED(LED_ID_RUN, LED_OFF);
- cmsis_dap_cmd_DAP_LED(LED_ID_CONNECT, LED_OFF);
-
- cmsis_dap_usb_close(cmsis_dap_handle);
-
- return ERROR_OK;
-}
-
-static int cmsis_dap_reset(int trst, int srst)
-{
- /* Set both TRST and SRST even if they're not enabled as
- * there's no way to tristate them */
-
- output_pins = 0;
- if (!srst)
- output_pins |= SWJ_PIN_SRST;
- if (!trst)
- output_pins |= SWJ_PIN_TRST;
-
- int retval = cmsis_dap_cmd_DAP_SWJ_Pins(output_pins,
- SWJ_PIN_TRST | SWJ_PIN_SRST, 0, NULL);
- if (retval != ERROR_OK)
- LOG_ERROR("CMSIS-DAP: Interface reset failed");
- return retval;
-}
-
-static void cmsis_dap_execute_sleep(struct jtag_command *cmd)
-{
-#if 0
- int retval = cmsis_dap_cmd_DAP_Delay(cmd->cmd.sleep->us);
- if (retval != ERROR_OK)
-#endif
- jtag_sleep(cmd->cmd.sleep->us);
-}
-
-/* Set TMS high for five TCK clocks, to move the TAP to the Test-Logic-Reset state */
-static int cmsis_dap_execute_tlr_reset(struct jtag_command *cmd)
-{
- LOG_INFO("cmsis-dap JTAG TLR_RESET");
- uint8_t seq = 0xff;
- int ret = cmsis_dap_cmd_DAP_SWJ_Sequence(8, &seq);
- if (ret == ERROR_OK)
- tap_set_state(TAP_RESET);
- return ret;
-}
-
-/* Set new end state */
-static void cmsis_dap_end_state(tap_state_t state)
-{
- if (tap_is_state_stable(state))
- tap_set_end_state(state);
- else {
- LOG_ERROR("BUG: %i is not a valid end state", state);
- exit(-1);
- }
-}
-
-#ifdef SPRINT_BINARY
-static void sprint_binary(char *s, const uint8_t *buf, int offset, int len)
-{
- if (!len)
- return;
-
- /*
- buf = { 0x18 } len=5 should result in: 11000
- buf = { 0xff 0x18 } len=13 should result in: 11111111 11000
- buf = { 0xc0 0x18 } offset=3 len=10 should result in: 11000 11000
- i=3 there means i/8 = 0 so c = 0xFF, and
- */
- for (int i = offset; i < offset + len; ++i) {
- uint8_t c = buf[i / 8], mask = 1 << (i % 8);
- if ((i != offset) && !(i % 8))
- putchar(' ');
- *s++ = (c & mask) ? '1' : '0';
- }
- *s = 0;
-}
-#endif
-
-#ifdef CMSIS_DAP_JTAG_DEBUG
-static void debug_parse_cmsis_buf(const uint8_t *cmd, int cmdlen)
-{
- /* cmd is a usb packet to go to the cmsis-dap interface */
- printf("cmsis-dap buffer (%d b): ", cmdlen);
- for (int i = 0; i < cmdlen; ++i)
- printf(" %02x", cmd[i]);
- printf("\n");
- switch (cmd[1]) {
- case CMD_DAP_JTAG_SEQ: {
- printf("cmsis-dap jtag sequence command %02x (n=%d)\n", cmd[1], cmd[2]);
- /*
- * #2 = number of sequences
- * #3 = sequence info 1
- * #4...4+n_bytes-1 = sequence 1
- * #4+n_bytes = sequence info 2
- * #5+n_bytes = sequence 2 (single bit)
- */
- int pos = 3;
- for (int seq = 0; seq < cmd[2]; ++seq) {
- uint8_t info = cmd[pos++];
- int len = info & DAP_JTAG_SEQ_TCK;
- if (len == 0)
- len = 64;
- printf(" sequence %d starting %d: info %02x (len=%d tms=%d read_tdo=%d): ",
- seq, pos, info, len, info & DAP_JTAG_SEQ_TMS, info & DAP_JTAG_SEQ_TDO);
- for (int i = 0; i < DIV_ROUND_UP(len, 8); ++i)
- printf(" %02x", cmd[pos+i]);
- pos += DIV_ROUND_UP(len, 8);
- printf("\n");
- }
- if (pos != cmdlen) {
- printf("BUFFER LENGTH MISMATCH looks like %d but %d specified", pos, cmdlen);
- exit(-1);
- }
-
- break;
- }
- default:
- LOG_DEBUG("unknown cmsis-dap command %02x", cmd[1]);
- break;
- }
-}
-#endif
-
-static void cmsis_dap_flush(void)
-{
- if (!queued_seq_count)
- return;
-
- LOG_DEBUG_IO("Flushing %d queued sequences (%d bytes) with %d pending scan results to capture",
- queued_seq_count, queued_seq_buf_end, pending_scan_result_count);
-
- /* prep CMSIS-DAP packet */
- uint8_t *buffer = cmsis_dap_handle->packet_buffer;
- buffer[0] = 0; /* report number */
- buffer[1] = CMD_DAP_JTAG_SEQ;
- buffer[2] = queued_seq_count;
- memcpy(buffer + 3, queued_seq_buf, queued_seq_buf_end);
-
-#ifdef CMSIS_DAP_JTAG_DEBUG
- debug_parse_cmsis_buf(buffer, queued_seq_buf_end + 3);
-#endif
-
- /* send command to USB device */
- int retval = cmsis_dap_usb_xfer(cmsis_dap_handle, queued_seq_buf_end + 3);
- if (retval != ERROR_OK || buffer[1] != DAP_OK) {
- LOG_ERROR("CMSIS-DAP command CMD_DAP_JTAG_SEQ failed.");
- exit(-1);
- }
-
-#ifdef CMSIS_DAP_JTAG_DEBUG
- LOG_DEBUG_IO("USB response buf:");
- for (int c = 0; c < queued_seq_buf_end + 3; ++c)
- printf("%02X ", buffer[c]);
- printf("\n");
-#endif
-
- /* copy scan results into client buffers */
- for (int i = 0; i < pending_scan_result_count; ++i) {
- struct pending_scan_result *scan = &pending_scan_results[i];
- LOG_DEBUG_IO("Copying pending_scan_result %d/%d: %d bits from byte %d -> buffer + %d bits",
- i, pending_scan_result_count, scan->length, scan->first + 2, scan->buffer_offset);
-#ifdef CMSIS_DAP_JTAG_DEBUG
- for (uint32_t b = 0; b < DIV_ROUND_UP(scan->length, 8); ++b)
- printf("%02X ", buffer[2+scan->first+b]);
- printf("\n");
-#endif
- bit_copy(scan->buffer, scan->buffer_offset, buffer + 2 + scan->first, 0, scan->length);
- }
-
- /* reset */
- queued_seq_count = 0;
- queued_seq_buf_end = 0;
- queued_seq_tdo_ptr = 0;
- pending_scan_result_count = 0;
-}
-
-/* queue a sequence of bits to clock out TDI / in TDO, executing if the buffer is full.
- *
- * sequence=NULL means clock out zeros on TDI
- * tdo_buffer=NULL means don't capture TDO
- */
-static void cmsis_dap_add_jtag_sequence(int s_len, const uint8_t *sequence, int s_offset,
- bool tms, uint8_t *tdo_buffer, int tdo_buffer_offset)
-{
- LOG_DEBUG_IO("[at %d] %d bits, tms %s, seq offset %d, tdo buf %p, tdo offset %d",
- queued_seq_buf_end,
- s_len, tms ? "HIGH" : "LOW", s_offset, tdo_buffer, tdo_buffer_offset);
-
- if (s_len == 0)
- return;
-
- if (s_len > 64) {
- LOG_DEBUG_IO("START JTAG SEQ SPLIT");
- for (int offset = 0; offset < s_len; offset += 64) {
- int len = s_len - offset;
- if (len > 64)
- len = 64;
- LOG_DEBUG_IO("Splitting long jtag sequence: %d-bit chunk starting at offset %d", len, offset);
- cmsis_dap_add_jtag_sequence(
- len,
- sequence,
- s_offset + offset,
- tms,
- tdo_buffer,
- tdo_buffer == NULL ? 0 : (tdo_buffer_offset + offset)
- );
- }
- LOG_DEBUG_IO("END JTAG SEQ SPLIT");
- return;
- }
-
- int cmd_len = 1 + DIV_ROUND_UP(s_len, 8);
- if (queued_seq_count >= 255 || queued_seq_buf_end + cmd_len > QUEUED_SEQ_BUF_LEN)
- /* empty out the buffer */
- cmsis_dap_flush();
-
- ++queued_seq_count;
-
- /* control byte */
- queued_seq_buf[queued_seq_buf_end] =
- (tms ? DAP_JTAG_SEQ_TMS : 0) |
- (tdo_buffer != NULL ? DAP_JTAG_SEQ_TDO : 0) |
- (s_len == 64 ? 0 : s_len);
-
- if (sequence != NULL)
- bit_copy(&queued_seq_buf[queued_seq_buf_end + 1], 0, sequence, s_offset, s_len);
- else
- memset(&queued_seq_buf[queued_seq_buf_end + 1], 0, DIV_ROUND_UP(s_len, 8));
-
- queued_seq_buf_end += cmd_len;
-
- if (tdo_buffer != NULL) {
- struct pending_scan_result *scan = &pending_scan_results[pending_scan_result_count++];
- scan->first = queued_seq_tdo_ptr;
- queued_seq_tdo_ptr += DIV_ROUND_UP(s_len, 8);
- scan->length = s_len;
- scan->buffer = tdo_buffer;
- scan->buffer_offset = tdo_buffer_offset;
- }
-}
-
-/* queue a sequence of bits to clock out TMS, executing if the buffer is full */
-static void cmsis_dap_add_tms_sequence(const uint8_t *sequence, int s_len)
-{
- LOG_DEBUG_IO("%d bits: %02X", s_len, *sequence);
- /* we use a series of CMD_DAP_JTAG_SEQ commands to toggle TMS,
- because even though it seems ridiculously inefficient, it
- allows us to combine TMS and scan sequences into the same
- USB packet. */
- /* TODO: combine runs of the same tms value */
- for (int i = 0; i < s_len; ++i) {
- bool bit = (sequence[i / 8] & (1 << (i % 8))) != 0;
- cmsis_dap_add_jtag_sequence(1, NULL, 0, bit, NULL, 0);
- }
-}
-
-/* Move to the end state by queuing a sequence to clock into TMS */
-static void cmsis_dap_state_move(void)
-{
- uint8_t tms_scan;
- uint8_t tms_scan_bits;
-
- tms_scan = tap_get_tms_path(tap_get_state(), tap_get_end_state());
- tms_scan_bits = tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
-
- LOG_DEBUG_IO("state move from %s to %s: %d clocks, %02X on tms",
- tap_state_name(tap_get_state()), tap_state_name(tap_get_end_state()),
- tms_scan_bits, tms_scan);
- cmsis_dap_add_tms_sequence(&tms_scan, tms_scan_bits);
-
- tap_set_state(tap_get_end_state());
-}
-
-
-/* Execute a JTAG scan operation by queueing TMS and TDI/TDO sequences */
-static void cmsis_dap_execute_scan(struct jtag_command *cmd)
-{
- LOG_DEBUG_IO("%s type:%d", cmd->cmd.scan->ir_scan ? "IRSCAN" : "DRSCAN",
- jtag_scan_type(cmd->cmd.scan));
-
- /* Make sure there are no trailing fields with num_bits == 0, or the logic below will fail. */
- while (cmd->cmd.scan->num_fields > 0
- && cmd->cmd.scan->fields[cmd->cmd.scan->num_fields - 1].num_bits == 0) {
- cmd->cmd.scan->num_fields--;
- LOG_DEBUG("discarding trailing empty field");
- }
-
- if (cmd->cmd.scan->num_fields == 0) {
- LOG_DEBUG("empty scan, doing nothing");
- return;
- }
-
- if (cmd->cmd.scan->ir_scan) {
- if (tap_get_state() != TAP_IRSHIFT) {
- cmsis_dap_end_state(TAP_IRSHIFT);
- cmsis_dap_state_move();
- }
- } else {
- if (tap_get_state() != TAP_DRSHIFT) {
- cmsis_dap_end_state(TAP_DRSHIFT);
- cmsis_dap_state_move();
- }
- }
-
- cmsis_dap_end_state(cmd->cmd.scan->end_state);
-
- struct scan_field *field = cmd->cmd.scan->fields;
- unsigned scan_size = 0;
-
- for (int i = 0; i < cmd->cmd.scan->num_fields; i++, field++) {
- scan_size += field->num_bits;
- LOG_DEBUG_IO("%s%s field %d/%d %d bits",
- field->in_value ? "in" : "",
- field->out_value ? "out" : "",
- i,
- cmd->cmd.scan->num_fields,
- field->num_bits);
-
- if (i == cmd->cmd.scan->num_fields - 1 && tap_get_state() != tap_get_end_state()) {
- LOG_DEBUG_IO("Last field and have to move out of SHIFT state");
- /* Last field, and we're leaving IRSHIFT/DRSHIFT. Clock last bit during tap
- * movement. This last field can't have length zero, it was checked above. */
- cmsis_dap_add_jtag_sequence(
- field->num_bits - 1, /* number of bits to clock */
- field->out_value, /* output sequence */
- 0, /* output offset */
- false, /* TMS low */
- field->in_value,
- 0);
-
- /* Clock the last bit out, with TMS high */
- uint8_t last_bit = 0;
- if (field->out_value)
- bit_copy(&last_bit, 0, field->out_value, field->num_bits - 1, 1);
- cmsis_dap_add_jtag_sequence(
- 1,
- &last_bit,
- 0,
- true,
- field->in_value,
- field->num_bits - 1);
- tap_set_state(tap_state_transition(tap_get_state(), 1));
-
- /* Now clock one more cycle, with TMS low, to get us into a PAUSE state */
- cmsis_dap_add_jtag_sequence(
- 1,
- &last_bit,
- 0,
- false,
- NULL,
- 0);
- tap_set_state(tap_state_transition(tap_get_state(), 0));
- } else {
- LOG_DEBUG_IO("Internal field, staying in SHIFT state afterwards");
- /* Clocking part of a sequence into DR or IR with TMS=0,
- leaving TMS=0 at the end so we can continue later */
- cmsis_dap_add_jtag_sequence(
- field->num_bits,
- field->out_value,
- 0,
- false,
- field->in_value,
- 0);
- }
- }
-
- if (tap_get_state() != tap_get_end_state()) {
- cmsis_dap_end_state(tap_get_end_state());
- cmsis_dap_state_move();
- }
-
- LOG_DEBUG_IO("%s scan, %i bits, end in %s",
- (cmd->cmd.scan->ir_scan) ? "IR" : "DR", scan_size,
- tap_state_name(tap_get_end_state()));
-}
-
-static void cmsis_dap_pathmove(int num_states, tap_state_t *path)
-{
- int i;
- uint8_t tms0 = 0x00;
- uint8_t tms1 = 0xff;
-
- for (i = 0; i < num_states; i++) {
- if (path[i] == tap_state_transition(tap_get_state(), false))
- cmsis_dap_add_tms_sequence(&tms0, 1);
- else if (path[i] == tap_state_transition(tap_get_state(), true))
- cmsis_dap_add_tms_sequence(&tms1, 1);
- else {
- LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition.",
- tap_state_name(tap_get_state()), tap_state_name(path[i]));
- exit(-1);
- }
-
- tap_set_state(path[i]);
- }
-
- cmsis_dap_end_state(tap_get_state());
-}
-
-static void cmsis_dap_execute_pathmove(struct jtag_command *cmd)
-{
- LOG_DEBUG_IO("pathmove: %i states, end in %i",
- cmd->cmd.pathmove->num_states,
- cmd->cmd.pathmove->path[cmd->cmd.pathmove->num_states - 1]);
-
- cmsis_dap_pathmove(cmd->cmd.pathmove->num_states, cmd->cmd.pathmove->path);
-}
-
-static void cmsis_dap_stableclocks(int num_cycles)
-{
- int i;
-
- uint8_t tms = tap_get_state() == TAP_RESET;
- /* TODO: Perform optimizations? */
- /* Execute num_cycles. */
- for (i = 0; i < num_cycles; i++)
- cmsis_dap_add_tms_sequence(&tms, 1);
-}
-
-static void cmsis_dap_runtest(int num_cycles)
-{
- tap_state_t saved_end_state = tap_get_end_state();
-
- /* Only do a state_move when we're not already in IDLE. */
- if (tap_get_state() != TAP_IDLE) {
- cmsis_dap_end_state(TAP_IDLE);
- cmsis_dap_state_move();
- }
- cmsis_dap_stableclocks(num_cycles);
-
- /* Finish in end_state. */
- cmsis_dap_end_state(saved_end_state);
-
- if (tap_get_state() != tap_get_end_state())
- cmsis_dap_state_move();
-}
-
-static void cmsis_dap_execute_runtest(struct jtag_command *cmd)
-{
- LOG_DEBUG_IO("runtest %i cycles, end in %i", cmd->cmd.runtest->num_cycles,
- cmd->cmd.runtest->end_state);
-
- cmsis_dap_end_state(cmd->cmd.runtest->end_state);
- cmsis_dap_runtest(cmd->cmd.runtest->num_cycles);
-}
-
-static void cmsis_dap_execute_stableclocks(struct jtag_command *cmd)
-{
- LOG_DEBUG_IO("stableclocks %i cycles", cmd->cmd.runtest->num_cycles);
- cmsis_dap_stableclocks(cmd->cmd.runtest->num_cycles);
-}
-
-static void cmsis_dap_execute_tms(struct jtag_command *cmd)
-{
- LOG_DEBUG_IO("TMS: %d bits", cmd->cmd.tms->num_bits);
- cmsis_dap_cmd_DAP_SWJ_Sequence(cmd->cmd.tms->num_bits, cmd->cmd.tms->bits);
-}
-
-/* TODO: Is there need to call cmsis_dap_flush() for the JTAG_PATHMOVE,
- * JTAG_RUNTEST, JTAG_STABLECLOCKS? */
-static void cmsis_dap_execute_command(struct jtag_command *cmd)
-{
- switch (cmd->type) {
- case JTAG_SLEEP:
- cmsis_dap_flush();
- cmsis_dap_execute_sleep(cmd);
- break;
- case JTAG_TLR_RESET:
- cmsis_dap_flush();
- cmsis_dap_execute_tlr_reset(cmd);
- break;
- case JTAG_SCAN:
- cmsis_dap_execute_scan(cmd);
- break;
- case JTAG_PATHMOVE:
- cmsis_dap_execute_pathmove(cmd);
- break;
- case JTAG_RUNTEST:
- cmsis_dap_execute_runtest(cmd);
- break;
- case JTAG_STABLECLOCKS:
- cmsis_dap_execute_stableclocks(cmd);
- break;
- case JTAG_TMS:
- cmsis_dap_execute_tms(cmd);
- break;
- default:
- LOG_ERROR("BUG: unknown JTAG command type 0x%X encountered", cmd->type);
- exit(-1);
- }
-}
-
-static int cmsis_dap_execute_queue(void)
-{
- struct jtag_command *cmd = jtag_command_queue;
-
- while (cmd != NULL) {
- cmsis_dap_execute_command(cmd);
- cmd = cmd->next;
- }
-
- cmsis_dap_flush();
-
- return ERROR_OK;
-}
-
-static int cmsis_dap_speed(int speed)
-{
- if (speed > DAP_MAX_CLOCK)
- LOG_INFO("High speed (adapter speed %d) may be limited by adapter firmware.", speed);
-
- if (speed == 0) {
- LOG_ERROR("RTCK not supported. Set nonzero \"adapter speed\".");
- return ERROR_JTAG_NOT_IMPLEMENTED;
- }
-
- return cmsis_dap_cmd_DAP_SWJ_Clock(speed);
-}
-
-static int cmsis_dap_speed_div(int speed, int *khz)
-{
- *khz = speed;
- return ERROR_OK;
-}
-
-static int cmsis_dap_khz(int khz, int *jtag_speed)
-{
- *jtag_speed = khz;
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(cmsis_dap_handle_info_command)
-{
- if (cmsis_dap_get_version_info() == ERROR_OK)
- cmsis_dap_get_status();
-
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(cmsis_dap_handle_cmd_command)
-{
- int retval;
- unsigned i;
- uint8_t *buffer = cmsis_dap_handle->packet_buffer;
-
- buffer[0] = 0; /* report number */
-
- for (i = 0; i < CMD_ARGC; i++)
- buffer[i + 1] = strtoul(CMD_ARGV[i], NULL, 16);
-
- retval = cmsis_dap_usb_xfer(cmsis_dap_handle, CMD_ARGC + 1);
-
- if (retval != ERROR_OK) {
- LOG_ERROR("CMSIS-DAP command failed.");
- return ERROR_JTAG_DEVICE_ERROR;
- }
-
- LOG_INFO("Returned data %02" PRIx8 " %02" PRIx8 " %02" PRIx8 " %02" PRIx8,
- buffer[1], buffer[2], buffer[3], buffer[4]);
-
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(cmsis_dap_handle_vid_pid_command)
-{
- if (CMD_ARGC > MAX_USB_IDS * 2) {
- LOG_WARNING("ignoring extra IDs in cmsis_dap_vid_pid "
- "(maximum is %d pairs)", MAX_USB_IDS);
- CMD_ARGC = MAX_USB_IDS * 2;
- }
- if (CMD_ARGC < 2 || (CMD_ARGC & 1)) {
- LOG_WARNING("incomplete cmsis_dap_vid_pid configuration directive");
- if (CMD_ARGC < 2)
- return ERROR_COMMAND_SYNTAX_ERROR;
- /* remove the incomplete trailing id */
- CMD_ARGC -= 1;
- }
-
- unsigned i;
- for (i = 0; i < CMD_ARGC; i += 2) {
- COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i], cmsis_dap_vid[i >> 1]);
- COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i + 1], cmsis_dap_pid[i >> 1]);
- }
-
- /*
- * Explicitly terminate, in case there are multiples instances of
- * cmsis_dap_vid_pid.
- */
- cmsis_dap_vid[i >> 1] = cmsis_dap_pid[i >> 1] = 0;
-
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(cmsis_dap_handle_serial_command)
-{
- if (CMD_ARGC == 1) {
- size_t len = mbstowcs(NULL, CMD_ARGV[0], 0);
- cmsis_dap_serial = calloc(len + 1, sizeof(wchar_t));
- if (cmsis_dap_serial == NULL) {
- LOG_ERROR("unable to allocate memory");
- return ERROR_OK;
- }
- if (mbstowcs(cmsis_dap_serial, CMD_ARGV[0], len + 1) == (size_t)-1) {
- free(cmsis_dap_serial);
- cmsis_dap_serial = NULL;
- LOG_ERROR("unable to convert serial");
- }
- } else {
- LOG_ERROR("expected exactly one argument to cmsis_dap_serial ");
- }
-
- return ERROR_OK;
-}
-
-static const struct command_registration cmsis_dap_subcommand_handlers[] = {
- {
- .name = "info",
- .handler = &cmsis_dap_handle_info_command,
- .mode = COMMAND_EXEC,
- .usage = "",
- .help = "show cmsis-dap info",
- },
- {
- .name = "cmd",
- .handler = &cmsis_dap_handle_cmd_command,
- .mode = COMMAND_EXEC,
- .usage = "",
- .help = "issue cmsis-dap command",
- },
- COMMAND_REGISTRATION_DONE
-};
-
-static const struct command_registration cmsis_dap_command_handlers[] = {
- {
- .name = "cmsis-dap",
- .mode = COMMAND_ANY,
- .help = "perform CMSIS-DAP management",
- .usage = "",
- .chain = cmsis_dap_subcommand_handlers,
- },
- {
- .name = "cmsis_dap_vid_pid",
- .handler = &cmsis_dap_handle_vid_pid_command,
- .mode = COMMAND_CONFIG,
- .help = "the vendor ID and product ID of the CMSIS-DAP device",
- .usage = "(vid pid)* ",
- },
- {
- .name = "cmsis_dap_serial",
- .handler = &cmsis_dap_handle_serial_command,
- .mode = COMMAND_CONFIG,
- .help = "set the serial number of the adapter",
- .usage = "serial_string",
- },
- COMMAND_REGISTRATION_DONE
-};
-
-static const struct swd_driver cmsis_dap_swd_driver = {
- .init = cmsis_dap_swd_init,
- .switch_seq = cmsis_dap_swd_switch_seq,
- .read_reg = cmsis_dap_swd_read_reg,
- .write_reg = cmsis_dap_swd_write_reg,
- .run = cmsis_dap_swd_run_queue,
-};
-
-static const char * const cmsis_dap_transport[] = { "swd", "jtag", NULL };
-
-static struct jtag_interface cmsis_dap_interface = {
- .supported = DEBUG_CAP_TMS_SEQ,
- .execute_queue = cmsis_dap_execute_queue,
-};
-
-struct adapter_driver cmsis_dap_adapter_driver = {
- .name = "cmsis-dap",
- .transports = cmsis_dap_transport,
- .commands = cmsis_dap_command_handlers,
-
- .init = cmsis_dap_init,
- .quit = cmsis_dap_quit,
- .reset = cmsis_dap_reset,
- .speed = cmsis_dap_speed,
- .khz = cmsis_dap_khz,
- .speed_div = cmsis_dap_speed_div,
-
- .jtag_ops = &cmsis_dap_interface,
- .swd_ops = &cmsis_dap_swd_driver,
-};