X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=src%2Fflash%2Fnor%2Fstm32f2x.c;h=b49e76e3218eec8413e9362aa87494ce9a921a86;hb=181d594205f91969b0effdbc97e3d689d28e4cb3;hp=1acab8222d523be2755332be591ee490abcc0f0d;hpb=4e9ee81f0c2c4b86ce006206ae9b65e89210e784;p=openocd.git
diff --git a/src/flash/nor/stm32f2x.c b/src/flash/nor/stm32f2x.c
index 1acab8222d..b49e76e321 100644
--- a/src/flash/nor/stm32f2x.c
+++ b/src/flash/nor/stm32f2x.c
@@ -59,10 +59,14 @@
*
* Sector sizes in kiBytes:
* 1 MiByte part with 4 x 16, 1 x 64, 7 x 128.
+ * 1.5 MiByte part with 4 x 16, 1 x 64, 11 x 128.
* 2 MiByte part with 4 x 16, 1 x 64, 7 x 128, 4 x 16, 1 x 64, 7 x 128.
* 1 MiByte STM32F42x/43x part with DB1M Option set:
* 4 x 16, 1 x 64, 3 x 128, 4 x 16, 1 x 64, 3 x 128.
*
+ * STM32F7[2|3]
+ * 512 kiByte part with 4 x 16, 1 x 64, 3 x 128.
+ *
* STM32F7[4|5]
* 1 MiByte part with 4 x 32, 1 x 128, 3 x 256.
*
@@ -93,6 +97,12 @@
* RM0410
* http://www.st.com/resource/en/reference_manual/dm00224583.pdf
*
+ * RM0430
+ * http://www.st.com/resource/en/reference_manual/dm00305666.pdf
+ *
+ * RM0431
+ * http://www.st.com/resource/en/reference_manual/dm00305990.pdf
+ *
* STM32F1x series - notice that this code was copy, pasted and knocked
* into a stm32f2x driver, so in case something has been converted or
* bugs haven't been fixed, here are the original manuals:
@@ -110,6 +120,22 @@
#define FLASH_ERASE_TIMEOUT 10000
#define FLASH_WRITE_TIMEOUT 5
+/* Mass erase time can be as high as 32 s in x8 mode. */
+#define FLASH_MASS_ERASE_TIMEOUT 33000
+
+#define FLASH_BANK_BASE 0x80000000
+
+#define STM32F2_OTP_SIZE 512
+#define STM32F2_OTP_SECTOR_SIZE 32
+#define STM32F2_OTP_BANK_BASE 0x1fff7800
+#define STM32F2_OTP_LOCK_BASE ((STM32F2_OTP_BANK_BASE) + (STM32F2_OTP_SIZE))
+
+/* see RM0410 section 3.6 "One-time programmable bytes" */
+#define STM32F7_OTP_SECTOR_SIZE 64
+#define STM32F7_OTP_SIZE 1024
+#define STM32F7_OTP_BANK_BASE 0x1ff0f000
+#define STM32F7_OTP_LOCK_BASE ((STM32F7_OTP_BANK_BASE) + (STM32F7_OTP_SIZE))
+
#define STM32_FLASH_BASE 0x40023c00
#define STM32_FLASH_ACR 0x40023c00
#define STM32_FLASH_KEYR 0x40023c04
@@ -118,6 +144,7 @@
#define STM32_FLASH_CR 0x40023c10
#define STM32_FLASH_OPTCR 0x40023c14
#define STM32_FLASH_OPTCR1 0x40023c18
+#define STM32_FLASH_OPTCR2 0x40023c1c
/* FLASH_CR register bits */
#define FLASH_PG (1 << 0)
@@ -129,9 +156,8 @@
#define FLASH_PSIZE_16 (1 << 8)
#define FLASH_PSIZE_32 (2 << 8)
#define FLASH_PSIZE_64 (3 << 8)
-/* The sector number encoding is not straight binary for dual bank flash.
- * Warning: evaluates the argument multiple times */
-#define FLASH_SNB(a) ((((a) >= 12) ? 0x10 | ((a) - 12) : (a)) << 3)
+/* The sector number encoding is not straight binary for dual bank flash. */
+#define FLASH_SNB(a) ((a) << 3)
#define FLASH_LOCK (1 << 31)
/* FLASH_SR register bits */
@@ -149,6 +175,10 @@
#define OPTCR_START (1 << 1)
#define OPTCR_NDBANK (1 << 29) /* not dual bank mode */
#define OPTCR_DB1M (1 << 30) /* 1 MiB devices dual flash bank option */
+#define OPTCR_SPRMOD (1 << 31) /* switches PCROPi/nWPRi interpretation */
+
+/* STM32_FLASH_OPTCR2 register bits */
+#define OPTCR2_PCROP_RDP (1 << 31) /* erase PCROP zone when decreasing RDP */
/* register unlock keys */
#define KEY1 0x45670123
@@ -163,17 +193,64 @@ struct stm32x_options {
uint16_t user_options; /* bit 0-7 usual options, bit 8-11 extra options */
uint32_t protection;
uint32_t boot_addr;
+ uint32_t optcr2_pcrop;
};
struct stm32x_flash_bank {
struct stm32x_options option_bytes;
- int probed;
+ bool probed;
+ bool otp_unlocked;
bool has_large_mem; /* F42x/43x/469/479/7xx in dual bank mode */
- bool has_boot_addr; /* F7xx */
bool has_extra_options; /* F42x/43x/469/479/7xx */
+ bool has_boot_addr; /* F7xx */
+ bool has_optcr2_pcrop; /* F72x/73x */
+ int protection_bits; /* F413/423 */
uint32_t user_bank_size;
};
+static bool stm32x_is_otp(struct flash_bank *bank)
+{
+ return bank->base == STM32F2_OTP_BANK_BASE ||
+ bank->base == STM32F7_OTP_BANK_BASE;
+}
+
+static bool stm32x_otp_is_f7(struct flash_bank *bank)
+{
+ return bank->base == STM32F7_OTP_BANK_BASE;
+}
+
+static int stm32x_is_otp_unlocked(struct flash_bank *bank)
+{
+ struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
+
+ return stm32x_info->otp_unlocked;
+}
+
+static int stm32x_otp_disable(struct flash_bank *bank)
+{
+ struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
+
+ LOG_INFO("OTP memory bank #%d is disabled for write commands.",
+ bank->bank_number);
+ stm32x_info->otp_unlocked = false;
+ return ERROR_OK;
+}
+
+static int stm32x_otp_enable(struct flash_bank *bank)
+{
+ struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
+
+ if (!stm32x_info->otp_unlocked) {
+ LOG_INFO("OTP memory bank #%d is is enabled for write commands.",
+ bank->bank_number);
+ stm32x_info->otp_unlocked = true;
+ } else {
+ LOG_WARNING("OTP memory bank #%d is is already enabled for write commands.",
+ bank->bank_number);
+ }
+ return ERROR_OK;
+}
+
/* flash bank stm32x 0 0
*/
FLASH_BANK_COMMAND_HANDLER(stm32x_flash_bank_command)
@@ -186,7 +263,8 @@ FLASH_BANK_COMMAND_HANDLER(stm32x_flash_bank_command)
stm32x_info = malloc(sizeof(struct stm32x_flash_bank));
bank->driver_priv = stm32x_info;
- stm32x_info->probed = 0;
+ stm32x_info->probed = false;
+ stm32x_info->otp_unlocked = false;
stm32x_info->user_bank_size = bank->size;
return ERROR_OK;
@@ -232,6 +310,8 @@ static int stm32x_wait_status_busy(struct flash_bank *bank, int timeout)
/* Clear but report errors */
if (status & FLASH_ERROR) {
+ if (retval == ERROR_OK)
+ retval = ERROR_FAIL;
/* If this operation fails, we ignore it and report the original
* retval
*/
@@ -325,11 +405,13 @@ static int stm32x_read_options(struct flash_bank *bank)
* whereas F7 6 bits (IWDG_SW and WWDG_SW) in user_options */
stm32x_info->option_bytes.user_options = optiondata & 0xfc;
stm32x_info->option_bytes.RDP = (optiondata >> 8) & 0xff;
- stm32x_info->option_bytes.protection = (optiondata >> 16) & 0xfff;
+ stm32x_info->option_bytes.protection =
+ (optiondata >> 16) & (~(0xffff << stm32x_info->protection_bits) & 0xffff);
if (stm32x_info->has_extra_options) {
/* F42x/43x/469/479 and 7xx have up to 4 bits of extra options */
- stm32x_info->option_bytes.user_options |= (optiondata >> 20) & 0xf00;
+ stm32x_info->option_bytes.user_options |= (optiondata >> 20) &
+ ((0xf00 << (stm32x_info->protection_bits - 12)) & 0xf00);
}
if (stm32x_info->has_large_mem || stm32x_info->has_boot_addr) {
@@ -347,6 +429,20 @@ static int stm32x_read_options(struct flash_bank *bank)
}
}
+ if (stm32x_info->has_optcr2_pcrop) {
+ retval = target_read_u32(target, STM32_FLASH_OPTCR2, &optiondata);
+ if (retval != ERROR_OK)
+ return retval;
+
+ stm32x_info->option_bytes.optcr2_pcrop = optiondata;
+ if (stm32x_info->has_optcr2_pcrop &&
+ (stm32x_info->option_bytes.optcr2_pcrop & ~OPTCR2_PCROP_RDP)) {
+ LOG_INFO("PCROP Engaged");
+ }
+ } else {
+ stm32x_info->option_bytes.optcr2_pcrop = 0x0;
+ }
+
if (stm32x_info->option_bytes.RDP != 0xAA)
LOG_INFO("Device Security Bit Set");
@@ -368,11 +464,13 @@ static int stm32x_write_options(struct flash_bank *bank)
/* rebuild option data */
optiondata = stm32x_info->option_bytes.user_options & 0xfc;
optiondata |= stm32x_info->option_bytes.RDP << 8;
- optiondata |= (stm32x_info->option_bytes.protection & 0x0fff) << 16;
+ optiondata |= (stm32x_info->option_bytes.protection &
+ (~(0xffff << stm32x_info->protection_bits))) << 16;
if (stm32x_info->has_extra_options) {
/* F42x/43x/469/479 and 7xx have up to 4 bits of extra options */
- optiondata |= (stm32x_info->option_bytes.user_options & 0xf00) << 20;
+ optiondata |= (stm32x_info->option_bytes.user_options &
+ ((0xf00 << (stm32x_info->protection_bits - 12)) & 0xf00)) << 20;
}
if (stm32x_info->has_large_mem || stm32x_info->has_boot_addr) {
@@ -389,6 +487,14 @@ static int stm32x_write_options(struct flash_bank *bank)
return retval;
}
+ /* program extra pcrop register */
+ if (stm32x_info->has_optcr2_pcrop) {
+ retval = target_write_u32(target, STM32_FLASH_OPTCR2,
+ stm32x_info->option_bytes.optcr2_pcrop);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
/* program options */
retval = target_write_u32(target, STM32_FLASH_OPTCR, optiondata);
if (retval != ERROR_OK)
@@ -399,8 +505,8 @@ static int stm32x_write_options(struct flash_bank *bank)
if (retval != ERROR_OK)
return retval;
- /* wait for completion */
- retval = stm32x_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
+ /* wait for completion, this might trigger a security erase and take a while */
+ retval = stm32x_wait_status_busy(bank, FLASH_MASS_ERASE_TIMEOUT);
if (retval != ERROR_OK)
return retval;
@@ -412,46 +518,98 @@ static int stm32x_write_options(struct flash_bank *bank)
return ERROR_OK;
}
+static int stm32x_otp_read_protect(struct flash_bank *bank)
+{
+ struct target *target = bank->target;
+ uint32_t lock_base;
+ int i, retval;
+ uint8_t lock;
+
+ lock_base = stm32x_otp_is_f7(bank) ? STM32F7_OTP_LOCK_BASE
+ : STM32F2_OTP_LOCK_BASE;
+
+ for (i = 0; i < bank->num_sectors; i++) {
+ retval = target_read_u8(target, lock_base + i, &lock);
+ if (retval != ERROR_OK)
+ return retval;
+ bank->sectors[i].is_protected = !lock;
+ }
+
+ return ERROR_OK;
+}
+
+static int stm32x_otp_protect(struct flash_bank *bank, int first, int last)
+{
+ struct target *target = bank->target;
+ uint32_t lock_base;
+ int i, retval;
+ uint8_t lock;
+
+ assert((0 <= first) && (first <= last) && (last < bank->num_sectors));
+
+ lock_base = stm32x_otp_is_f7(bank) ? STM32F7_OTP_LOCK_BASE
+ : STM32F2_OTP_LOCK_BASE;
+
+ for (i = first; first <= last; i++) {
+ retval = target_read_u8(target, lock_base + i, &lock);
+ if (retval != ERROR_OK)
+ return retval;
+ if (lock)
+ continue;
+
+ lock = 0xff;
+ retval = target_write_u8(target, lock_base + i, lock);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ return ERROR_OK;
+}
+
static int stm32x_protect_check(struct flash_bank *bank)
{
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
+ struct flash_sector *prot_blocks;
+ int num_prot_blocks;
+ int retval;
+
+ /* if it's the OTP bank, look at the lock bits there */
+ if (stm32x_is_otp(bank))
+ return stm32x_otp_read_protect(bank);
/* read write protection settings */
- int retval = stm32x_read_options(bank);
+ retval = stm32x_read_options(bank);
if (retval != ERROR_OK) {
LOG_DEBUG("unable to read option bytes");
return retval;
}
- if (stm32x_info->has_boot_addr && stm32x_info->has_large_mem) {
- /* F76x/77x: bit k protects sectors 2*k and 2*k+1 */
- for (int i = 0; i < (bank->num_sectors >> 1); i++) {
- if (stm32x_info->option_bytes.protection & (1 << i)) {
- bank->sectors[i << 1].is_protected = 0;
- bank->sectors[(i << 1) + 1].is_protected = 0;
- } else {
- bank->sectors[i << 1].is_protected = 1;
- bank->sectors[(i << 1) + 1].is_protected = 1;
- }
- }
+ if (bank->prot_blocks) {
+ num_prot_blocks = bank->num_prot_blocks;
+ prot_blocks = bank->prot_blocks;
} else {
- /* one protection bit per sector */
- for (int i = 0; i < bank->num_sectors; i++) {
- if (stm32x_info->option_bytes.protection & (1 << i))
- bank->sectors[i].is_protected = 0;
- else
- bank->sectors[i].is_protected = 1;
- }
+ num_prot_blocks = bank->num_sectors;
+ prot_blocks = bank->sectors;
}
+ for (int i = 0; i < num_prot_blocks; i++)
+ prot_blocks[i].is_protected =
+ ~(stm32x_info->option_bytes.protection >> i) & 1;
+
return ERROR_OK;
}
static int stm32x_erase(struct flash_bank *bank, int first, int last)
{
+ struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
struct target *target = bank->target;
int i;
+ if (stm32x_is_otp(bank)) {
+ LOG_ERROR("Cannot erase OTP memory");
+ return ERROR_FAIL;
+ }
+
assert((0 <= first) && (first <= last) && (last < bank->num_sectors));
if (bank->target->state != TARGET_HALTED) {
@@ -476,8 +634,14 @@ static int stm32x_erase(struct flash_bank *bank, int first, int last)
*/
for (i = first; i <= last; i++) {
+ int snb;
+ if (stm32x_info->has_large_mem && i >= 12)
+ snb = (i - 12) | 0x10;
+ else
+ snb = i;
+
retval = target_write_u32(target,
- stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_SER | FLASH_SNB(i) | FLASH_STRT);
+ stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_SER | FLASH_SNB(snb) | FLASH_STRT);
if (retval != ERROR_OK)
return retval;
@@ -505,6 +669,13 @@ static int stm32x_protect(struct flash_bank *bank, int set, int first, int last)
return ERROR_TARGET_NOT_HALTED;
}
+ if (stm32x_is_otp(bank)) {
+ if (!set)
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+
+ return stm32x_otp_protect(bank, first, last);
+ }
+
/* read protection settings */
int retval = stm32x_read_options(bank);
if (retval != ERROR_OK) {
@@ -512,17 +683,6 @@ static int stm32x_protect(struct flash_bank *bank, int set, int first, int last)
return retval;
}
- if (stm32x_info->has_boot_addr && stm32x_info->has_large_mem) {
- /* F76x/77x: bit k protects sectors 2*k and 2*k+1 */
- if ((first & 1) != 0 || (last & 1) != 1) {
- LOG_ERROR("sector protection must be double sector aligned");
- return ERROR_FAIL;
- } else {
- first >>= 1;
- last >>= 1;
- }
- }
-
for (int i = first; i <= last; i++) {
if (set)
stm32x_info->option_bytes.protection &= ~(1 << i);
@@ -549,47 +709,15 @@ static int stm32x_write_block(struct flash_bank *bank, const uint8_t *buffer,
struct armv7m_algorithm armv7m_info;
int retval = ERROR_OK;
- /* see contrib/loaders/flash/stm32f2x.S for src */
-
static const uint8_t stm32x_flash_write_code[] = {
- /* wait_fifo: */
- 0xD0, 0xF8, 0x00, 0x80, /* ldr r8, [r0, #0] */
- 0xB8, 0xF1, 0x00, 0x0F, /* cmp r8, #0 */
- 0x1A, 0xD0, /* beq exit */
- 0x47, 0x68, /* ldr r7, [r0, #4] */
- 0x47, 0x45, /* cmp r7, r8 */
- 0xF7, 0xD0, /* beq wait_fifo */
-
- 0xDF, 0xF8, 0x34, 0x60, /* ldr r6, STM32_PROG16 */
- 0x26, 0x61, /* str r6, [r4, #STM32_FLASH_CR_OFFSET] */
- 0x37, 0xF8, 0x02, 0x6B, /* ldrh r6, [r7], #0x02 */
- 0x22, 0xF8, 0x02, 0x6B, /* strh r6, [r2], #0x02 */
- 0xBF, 0xF3, 0x4F, 0x8F, /* dsb sy */
- /* busy: */
- 0xE6, 0x68, /* ldr r6, [r4, #STM32_FLASH_SR_OFFSET] */
- 0x16, 0xF4, 0x80, 0x3F, /* tst r6, #0x10000 */
- 0xFB, 0xD1, /* bne busy */
- 0x16, 0xF0, 0xF0, 0x0F, /* tst r6, #0xf0 */
- 0x07, 0xD1, /* bne error */
-
- 0x8F, 0x42, /* cmp r7, r1 */
- 0x28, 0xBF, /* it cs */
- 0x00, 0xF1, 0x08, 0x07, /* addcs r7, r0, #8 */
- 0x47, 0x60, /* str r7, [r0, #4] */
- 0x01, 0x3B, /* subs r3, r3, #1 */
- 0x13, 0xB1, /* cbz r3, exit */
- 0xDF, 0xE7, /* b wait_fifo */
- /* error: */
- 0x00, 0x21, /* movs r1, #0 */
- 0x41, 0x60, /* str r1, [r0, #4] */
- /* exit: */
- 0x30, 0x46, /* mov r0, r6 */
- 0x00, 0xBE, /* bkpt #0x00 */
-
- /* : */
- 0x01, 0x01, 0x00, 0x00, /* .word 0x00000101 */
+#include "../../../contrib/loaders/flash/stm32/stm32f2x.inc"
};
+ if (stm32x_is_otp(bank) && !stm32x_is_otp_unlocked(bank)) {
+ LOG_ERROR("OTP memory bank is disabled for write commands.");
+ return ERROR_FAIL;
+ }
+
if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code),
&write_algorithm) != ERROR_OK) {
LOG_WARNING("no working area available, can't do block memory writes");
@@ -599,8 +727,10 @@ static int stm32x_write_block(struct flash_bank *bank, const uint8_t *buffer,
retval = target_write_buffer(target, write_algorithm->address,
sizeof(stm32x_flash_write_code),
stm32x_flash_write_code);
- if (retval != ERROR_OK)
+ if (retval != ERROR_OK) {
+ target_free_working_area(target, write_algorithm);
return retval;
+ }
/* memory buffer */
while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
@@ -772,7 +902,7 @@ static int setup_sector(struct flash_bank *bank, int start, int num, int size)
bank->sectors[i].offset = bank->size;
bank->sectors[i].size = size;
bank->size += bank->sectors[i].size;
- LOG_DEBUG("sector %d: %dkBytes", i, size >> 10);
+ LOG_DEBUG("sector %d: %d kBytes", i, size >> 10);
}
return start + num;
@@ -826,27 +956,79 @@ static int stm32x_probe(struct flash_bank *bank)
{
struct target *target = bank->target;
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
- int i;
+ int i, num_prot_blocks, num_sectors;
uint16_t flash_size_in_kb;
+ uint16_t otp_size_in_b;
+ uint16_t otp_sector_size;
uint32_t flash_size_reg = 0x1FFF7A22;
uint16_t max_sector_size_in_kb = 128;
uint16_t max_flash_size_in_kb;
uint32_t device_id;
uint32_t base_address = 0x08000000;
- stm32x_info->probed = 0;
+ stm32x_info->probed = false;
stm32x_info->has_large_mem = false;
stm32x_info->has_boot_addr = false;
stm32x_info->has_extra_options = false;
+ stm32x_info->has_optcr2_pcrop = false;
+ stm32x_info->protection_bits = 12; /* max. number of nWRPi bits (in FLASH_OPTCR !!!) */
+ num_prot_blocks = 0;
+
+ if (bank->sectors) {
+ free(bank->sectors);
+ bank->num_sectors = 0;
+ bank->sectors = NULL;
+ }
+
+ if (bank->prot_blocks) {
+ free(bank->prot_blocks);
+ bank->num_prot_blocks = 0;
+ bank->prot_blocks = NULL;
+ }
+
+ /* if explicitely called out as OTP bank, short circuit probe */
+ if (stm32x_is_otp(bank)) {
+ if (stm32x_otp_is_f7(bank)) {
+ otp_size_in_b = STM32F7_OTP_SIZE;
+ otp_sector_size = STM32F7_OTP_SECTOR_SIZE;
+ } else {
+ otp_size_in_b = STM32F2_OTP_SIZE;
+ otp_sector_size = STM32F2_OTP_SECTOR_SIZE;
+ }
+
+ num_sectors = otp_size_in_b / otp_sector_size;
+ LOG_INFO("flash size = %d bytes", otp_size_in_b);
+
+ assert(num_sectors > 0);
+
+ bank->num_sectors = num_sectors;
+ bank->sectors = calloc(sizeof(struct flash_sector), num_sectors);
+
+ if (stm32x_otp_is_f7(bank))
+ bank->size = STM32F7_OTP_SIZE;
+ else
+ bank->size = STM32F2_OTP_SIZE;
+
+ for (i = 0; i < num_sectors; i++) {
+ bank->sectors[i].offset = i * otp_sector_size;
+ bank->sectors[i].size = otp_sector_size;
+ bank->sectors[i].is_erased = 1;
+ bank->sectors[i].is_protected = 0;
+ }
+
+ stm32x_info->probed = true;
+ return ERROR_OK;
+ }
/* read stm32 device id register */
int retval = stm32x_get_device_id(bank, &device_id);
if (retval != ERROR_OK)
return retval;
LOG_INFO("device id = 0x%08" PRIx32 "", device_id);
+ device_id &= 0xfff; /* only bits 0-11 are used further on */
/* set max flash size depending on family, id taken from AN2606 */
- switch (device_id & 0xfff) {
+ switch (device_id) {
case 0x411: /* F20x/21x */
case 0x413: /* F40x/41x */
max_flash_size_in_kb = 1024;
@@ -889,6 +1071,21 @@ static int stm32x_probe(struct flash_bank *bank)
stm32x_info->has_boot_addr = true;
break;
+ case 0x452: /* F72x/73x */
+ max_flash_size_in_kb = 512;
+ flash_size_reg = 0x1FF07A22; /* yes, 0x1FF*0*7A22, not 0x1FF*F*7A22 */
+ stm32x_info->has_extra_options = true;
+ stm32x_info->has_boot_addr = true;
+ stm32x_info->has_optcr2_pcrop = true;
+ break;
+
+ case 0x463: /* F413x/423x */
+ max_flash_size_in_kb = 1536;
+ stm32x_info->has_extra_options = true;
+ stm32x_info->protection_bits = 15;
+ num_prot_blocks = 15;
+ break;
+
default:
LOG_WARNING("Cannot identify target as a STM32 family.");
return ERROR_FAIL;
@@ -912,17 +1109,13 @@ static int stm32x_probe(struct flash_bank *bank)
flash_size_in_kb = stm32x_info->user_bank_size / 1024;
}
- LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
+ LOG_INFO("flash size = %d kbytes", flash_size_in_kb);
/* did we assign flash size? */
assert(flash_size_in_kb != 0xffff);
- /* Devices with > 1024 kiByte always are dual-banked */
- if (flash_size_in_kb > 1024)
- stm32x_info->has_large_mem = true;
-
/* F42x/43x/469/479 1024 kiByte devices have a dual bank option */
- if ((device_id & 0xfff) == 0x419 || (device_id & 0xfff) == 0x434) {
+ if ((device_id == 0x419) || (device_id == 0x434)) {
uint32_t optiondata;
retval = target_read_u32(target, STM32_FLASH_OPTCR, &optiondata);
if (retval != ERROR_OK) {
@@ -939,7 +1132,7 @@ static int stm32x_probe(struct flash_bank *bank)
}
/* F76x/77x devices have a dual bank option */
- if ((device_id & 0xfff) == 0x451) {
+ if (device_id == 0x451) {
uint32_t optiondata;
retval = target_read_u32(target, STM32_FLASH_OPTCR, &optiondata);
if (retval != ERROR_OK) {
@@ -960,11 +1153,6 @@ static int stm32x_probe(struct flash_bank *bank)
int num_pages = flash_size_in_kb / max_sector_size_in_kb
+ (stm32x_info->has_large_mem ? 8 : 4);
- if (bank->sectors) {
- free(bank->sectors);
- bank->sectors = NULL;
- }
-
bank->base = base_address;
bank->num_sectors = num_pages;
bank->sectors = malloc(sizeof(struct flash_sector) * num_pages);
@@ -975,18 +1163,48 @@ static int stm32x_probe(struct flash_bank *bank)
bank->size = 0;
LOG_DEBUG("allocated %d sectors", num_pages);
+ /* F76x/77x in dual bank mode */
+ if ((device_id == 0x451) && stm32x_info->has_large_mem)
+ num_prot_blocks = num_pages >> 1;
+
+ if (num_prot_blocks) {
+ bank->prot_blocks = malloc(sizeof(struct flash_sector) * num_prot_blocks);
+ for (i = 0; i < num_prot_blocks; i++)
+ bank->prot_blocks[i].is_protected = 0;
+ LOG_DEBUG("allocated %d prot blocks", num_prot_blocks);
+ }
+
if (stm32x_info->has_large_mem) {
/* dual-bank */
setup_bank(bank, 0, flash_size_in_kb >> 1, max_sector_size_in_kb);
setup_bank(bank, num_pages >> 1, flash_size_in_kb >> 1,
max_sector_size_in_kb);
+
+ /* F767x/F77x in dual mode, one protection bit refers to two adjacent sectors */
+ if (device_id == 0x451) {
+ for (i = 0; i < num_prot_blocks; i++) {
+ bank->prot_blocks[i].offset = bank->sectors[i << 1].offset;
+ bank->prot_blocks[i].size = bank->sectors[i << 1].size
+ + bank->sectors[(i << 1) + 1].size;
+ }
+ }
} else {
/* single-bank */
setup_bank(bank, 0, flash_size_in_kb, max_sector_size_in_kb);
+
+ /* F413/F423, sectors 14 and 15 share one common protection bit */
+ if (device_id == 0x463) {
+ for (i = 0; i < num_prot_blocks; i++) {
+ bank->prot_blocks[i].offset = bank->sectors[i].offset;
+ bank->prot_blocks[i].size = bank->sectors[i].size;
+ }
+ bank->prot_blocks[num_prot_blocks - 1].size <<= 1;
+ }
}
+ bank->num_prot_blocks = num_prot_blocks;
assert((bank->size >> 10) == flash_size_in_kb);
- stm32x_info->probed = 1;
+ stm32x_info->probed = true;
return ERROR_OK;
}
@@ -1104,6 +1322,14 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
case 0x1001:
rev_str = "Z";
break;
+
+ case 0x2000:
+ rev_str = "B";
+ break;
+
+ case 0x3000:
+ rev_str = "C";
+ break;
}
break;
@@ -1124,6 +1350,29 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
case 0x451:
device_str = "STM32F7[6|7]x";
+ switch (rev_id) {
+ case 0x1000:
+ rev_str = "A";
+ break;
+ case 0x1001:
+ rev_str = "Z";
+ break;
+ }
+ break;
+
+ case 0x452:
+ device_str = "STM32F7[2|3]x";
+
+ switch (rev_id) {
+ case 0x1000:
+ rev_str = "A";
+ break;
+ }
+ break;
+
+ case 0x463:
+ device_str = "STM32F4[1|2]3";
+
switch (rev_id) {
case 0x1000:
rev_str = "A";
@@ -1161,12 +1410,12 @@ COMMAND_HANDLER(stm32x_handle_lock_command)
target = bank->target;
if (target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
+ LOG_INFO("Target not halted");
+ /* return ERROR_TARGET_NOT_HALTED; */
}
if (stm32x_read_options(bank) != ERROR_OK) {
- command_print(CMD_CTX, "%s failed to read options", bank->driver->name);
+ command_print(CMD, "%s failed to read options", bank->driver->name);
return ERROR_OK;
}
@@ -1174,11 +1423,11 @@ COMMAND_HANDLER(stm32x_handle_lock_command)
stm32x_info->option_bytes.RDP = 0;
if (stm32x_write_options(bank) != ERROR_OK) {
- command_print(CMD_CTX, "%s failed to lock device", bank->driver->name);
+ command_print(CMD, "%s failed to lock device", bank->driver->name);
return ERROR_OK;
}
- command_print(CMD_CTX, "%s locked", bank->driver->name);
+ command_print(CMD, "%s locked", bank->driver->name);
return ERROR_OK;
}
@@ -1200,25 +1449,28 @@ COMMAND_HANDLER(stm32x_handle_unlock_command)
target = bank->target;
if (target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
+ LOG_INFO("Target not halted");
+ /* return ERROR_TARGET_NOT_HALTED; */
}
if (stm32x_read_options(bank) != ERROR_OK) {
- command_print(CMD_CTX, "%s failed to read options", bank->driver->name);
+ command_print(CMD, "%s failed to read options", bank->driver->name);
return ERROR_OK;
}
/* clear readout protection and complementary option bytes
* this will also force a device unlock if set */
stm32x_info->option_bytes.RDP = 0xAA;
+ if (stm32x_info->has_optcr2_pcrop) {
+ stm32x_info->option_bytes.optcr2_pcrop = OPTCR2_PCROP_RDP | (~1U << bank->num_sectors);
+ }
if (stm32x_write_options(bank) != ERROR_OK) {
- command_print(CMD_CTX, "%s failed to unlock device", bank->driver->name);
+ command_print(CMD, "%s failed to unlock device", bank->driver->name);
return ERROR_OK;
}
- command_print(CMD_CTX, "%s unlocked.\n"
+ command_print(CMD, "%s unlocked.\n"
"INFO: a reset or power cycle is required "
"for the new settings to take effect.", bank->driver->name);
@@ -1257,7 +1509,7 @@ static int stm32x_mass_erase(struct flash_bank *bank)
if (retval != ERROR_OK)
return retval;
- retval = stm32x_wait_status_busy(bank, 30000);
+ retval = stm32x_wait_status_busy(bank, FLASH_MASS_ERASE_TIMEOUT);
if (retval != ERROR_OK)
return retval;
@@ -1273,7 +1525,7 @@ COMMAND_HANDLER(stm32x_handle_mass_erase_command)
int i;
if (CMD_ARGC < 1) {
- command_print(CMD_CTX, "stm32x mass_erase ");
+ command_print(CMD, "stm32x mass_erase ");
return ERROR_COMMAND_SYNTAX_ERROR;
}
@@ -1288,9 +1540,9 @@ COMMAND_HANDLER(stm32x_handle_mass_erase_command)
for (i = 0; i < bank->num_sectors; i++)
bank->sectors[i].is_erased = 1;
- command_print(CMD_CTX, "stm32x mass erase complete");
+ command_print(CMD, "stm32x mass erase complete");
} else {
- command_print(CMD_CTX, "stm32x mass erase failed");
+ command_print(CMD, "stm32x mass erase failed");
}
return retval;
@@ -1303,7 +1555,7 @@ COMMAND_HANDLER(stm32f2x_handle_options_read_command)
struct stm32x_flash_bank *stm32x_info = NULL;
if (CMD_ARGC != 1) {
- command_print(CMD_CTX, "stm32f2x options_read ");
+ command_print(CMD, "stm32f2x options_read ");
return ERROR_COMMAND_SYNTAX_ERROR;
}
@@ -1320,16 +1572,20 @@ COMMAND_HANDLER(stm32f2x_handle_options_read_command)
if (stm32x_info->has_boot_addr) {
uint32_t boot_addr = stm32x_info->option_bytes.boot_addr;
- command_print(CMD_CTX, "stm32f2x user_options 0x%03X,"
+ command_print(CMD, "stm32f2x user_options 0x%03X,"
" boot_add0 0x%04X, boot_add1 0x%04X",
stm32x_info->option_bytes.user_options,
boot_addr & 0xffff, (boot_addr & 0xffff0000) >> 16);
+ if (stm32x_info->has_optcr2_pcrop) {
+ command_print(CMD, "stm32f2x optcr2_pcrop 0x%08X",
+ stm32x_info->option_bytes.optcr2_pcrop);
+ }
} else {
- command_print(CMD_CTX, "stm32f2x user_options 0x%03X,",
+ command_print(CMD, "stm32f2x user_options 0x%03X",
stm32x_info->option_bytes.user_options);
}
} else {
- command_print(CMD_CTX, "stm32f2x user_options 0x%02X",
+ command_print(CMD, "stm32f2x user_options 0x%02X",
stm32x_info->option_bytes.user_options);
}
@@ -1342,10 +1598,10 @@ COMMAND_HANDLER(stm32f2x_handle_options_write_command)
int retval;
struct flash_bank *bank;
struct stm32x_flash_bank *stm32x_info = NULL;
- uint16_t user_options, boot_addr0, boot_addr1;
+ uint16_t user_options, boot_addr0, boot_addr1, options_mask;
if (CMD_ARGC < 1) {
- command_print(CMD_CTX, "stm32f2x options_write ...");
+ command_print(CMD, "stm32f2x options_write ...");
return ERROR_COMMAND_SYNTAX_ERROR;
}
@@ -1360,7 +1616,7 @@ COMMAND_HANDLER(stm32f2x_handle_options_write_command)
stm32x_info = bank->driver_priv;
if (stm32x_info->has_boot_addr) {
if (CMD_ARGC != 4) {
- command_print(CMD_CTX, "stm32f2x options_write "
+ command_print(CMD, "stm32f2x options_write "
" ");
return ERROR_COMMAND_SYNTAX_ERROR;
}
@@ -1369,34 +1625,109 @@ COMMAND_HANDLER(stm32f2x_handle_options_write_command)
stm32x_info->option_bytes.boot_addr = boot_addr0 | (((uint32_t) boot_addr1) << 16);
} else {
if (CMD_ARGC != 2) {
- command_print(CMD_CTX, "stm32f2x options_write ");
+ command_print(CMD, "stm32f2x options_write ");
return ERROR_COMMAND_SYNTAX_ERROR;
}
}
COMMAND_PARSE_NUMBER(u16, CMD_ARGV[1], user_options);
- if (user_options & (stm32x_info->has_extra_options ? ~0xffc : ~0xfc)) {
- command_print(CMD_CTX, "stm32f2x invalid user_options");
- return ERROR_COMMAND_SYNTAX_ERROR;
+ options_mask = !stm32x_info->has_extra_options ? ~0xfc :
+ ~(((0xf00 << (stm32x_info->protection_bits - 12)) | 0xff) & 0xffc);
+ if (user_options & options_mask) {
+ command_print(CMD, "stm32f2x invalid user_options");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
}
stm32x_info->option_bytes.user_options = user_options;
if (stm32x_write_options(bank) != ERROR_OK) {
- command_print(CMD_CTX, "stm32f2x failed to write options");
+ command_print(CMD, "stm32f2x failed to write options");
return ERROR_OK;
}
/* switching between single- and dual-bank modes requires re-probe */
/* ... and reprogramming of whole flash */
- stm32x_info->probed = 0;
+ stm32x_info->probed = false;
- command_print(CMD_CTX, "stm32f2x write options complete.\n"
+ command_print(CMD, "stm32f2x write options complete.\n"
"INFO: a reset or power cycle is required "
"for the new settings to take effect.");
return retval;
}
+COMMAND_HANDLER(stm32f2x_handle_optcr2_write_command)
+{
+ int retval;
+ struct flash_bank *bank;
+ struct stm32x_flash_bank *stm32x_info = NULL;
+ uint32_t optcr2_pcrop;
+
+ if (CMD_ARGC != 2) {
+ command_print(CMD, "stm32f2x optcr2_write ");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ stm32x_info = bank->driver_priv;
+ if (!stm32x_info->has_optcr2_pcrop) {
+ command_print(CMD, "no optcr2 register");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+
+ command_print(CMD, "INFO: To disable PCROP, set PCROP_RDP"
+ " with PCROPi bits STILL SET, then\nlock device and"
+ " finally unlock it. Clears PCROP and mass erases flash.");
+
+ retval = stm32x_read_options(bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], optcr2_pcrop);
+ stm32x_info->option_bytes.optcr2_pcrop = optcr2_pcrop;
+
+ if (stm32x_write_options(bank) != ERROR_OK) {
+ command_print(CMD, "stm32f2x failed to write options");
+ return ERROR_OK;
+ }
+
+ command_print(CMD, "stm32f2x optcr2_write complete.");
+ return retval;
+}
+
+COMMAND_HANDLER(stm32x_handle_otp_command)
+{
+ if (CMD_ARGC < 2) {
+ command_print(CMD, "stm32x otp (enable|disable|show)");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ struct flash_bank *bank;
+ int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+ if (ERROR_OK != retval)
+ return retval;
+ if (stm32x_is_otp(bank)) {
+ if (strcmp(CMD_ARGV[1], "enable") == 0) {
+ stm32x_otp_enable(bank);
+ } else if (strcmp(CMD_ARGV[1], "disable") == 0) {
+ stm32x_otp_disable(bank);
+ } else if (strcmp(CMD_ARGV[1], "show") == 0) {
+ command_print(CMD,
+ "OTP memory bank #%d is %s for write commands.",
+ bank->bank_number,
+ stm32x_is_otp_unlocked(bank) ? "enabled" : "disabled");
+ } else {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+ } else {
+ command_print(CMD, "Failed: not an OTP bank.");
+ }
+
+ return retval;
+}
+
static const struct command_registration stm32x_exec_command_handlers[] = {
{
.name = "lock",
@@ -1430,9 +1761,23 @@ static const struct command_registration stm32x_exec_command_handlers[] = {
.name = "options_write",
.handler = stm32f2x_handle_options_write_command,
.mode = COMMAND_EXEC,
- .usage = "bank_id user_options [ boot_add0 boot_add1]",
+ .usage = "bank_id user_options [ boot_add0 boot_add1 ]",
.help = "Write option bytes",
},
+ {
+ .name = "optcr2_write",
+ .handler = stm32f2x_handle_optcr2_write_command,
+ .mode = COMMAND_EXEC,
+ .usage = "bank_id optcr2",
+ .help = "Write optcr2 word",
+ },
+ {
+ .name = "otp",
+ .handler = stm32x_handle_otp_command,
+ .mode = COMMAND_EXEC,
+ .usage = "bank_id",
+ .help = "OTP (One Time Programmable) memory write enable/disable.",
+ },
COMMAND_REGISTRATION_DONE
};
@@ -1447,7 +1792,7 @@ static const struct command_registration stm32x_command_handlers[] = {
COMMAND_REGISTRATION_DONE
};
-struct flash_driver stm32f2x_flash = {
+const struct flash_driver stm32f2x_flash = {
.name = "stm32f2x",
.commands = stm32x_command_handlers,
.flash_bank_command = stm32x_flash_bank_command,
@@ -1460,4 +1805,5 @@ struct flash_driver stm32f2x_flash = {
.erase_check = default_flash_blank_check,
.protect_check = stm32x_protect_check,
.info = get_stm32x_info,
+ .free_driver_priv = default_flash_free_driver_priv,
};