X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=README;h=900324ab10717057b3c3827c6b7468c2b775790a;hb=a31e579e879cfb3d67583780c4ebb6f1015ed5a5;hp=985e39a9826cb588adfb96c16c03a2e22f69f0ad;hpb=2d5f2ede55150235352773a976166c3ab68297bc;p=openocd.git diff --git a/README b/README index 985e39a982..900324ab10 100644 --- a/README +++ b/README @@ -42,7 +42,7 @@ e.g.: openocd -f interface/ftdi/jtagkey2.cfg -c "transport select jtag" \ -f target/ti_calypso.cfg - openocd -f interface/stlink-v2-1.cfg -c "transport select hla_swd" \ + openocd -f interface/stlink.cfg -c "transport select hla_swd" \ -f target/stm32l0.cfg After OpenOCD startup, connect GDB with @@ -117,17 +117,18 @@ Debug targets ------------- ARM11, ARM7, ARM9, AVR32, Cortex-A, Cortex-R, Cortex-M, LS102x-SAP, -Feroceon/Dragonite, DSP563xx, DSP5680xx, FA526, MIPS EJTAG, NDS32, -XScale, Intel Quark. +Feroceon/Dragonite, DSP563xx, DSP5680xx, EnSilica eSi-RISC, FA526, MIPS +EJTAG, NDS32, XScale, Intel Quark. Flash drivers ------------- -ADUC702x, AT91SAM, ATH79, AVR, CFI, DSP5680xx, EFM32, EM357, FM3, FM4, Kinetis, -LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900, LPCSPIFI, Marvell QSPI, -Milandr, NIIET, NuMicro, PIC32mx, PSoC4, PSoC5LP, SiM3x, Stellaris, STM32, -STMSMI, STR7x, STR9x, nRF51; NAND controllers of AT91SAM9, LPC3180, LPC32xx, -i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, S3C6400, XMC1xxx, XMC4xxx. +ADUC702x, AT91SAM, ATH79, AVR, CFI, DSP5680xx, EFM32, EM357, eSi-TSMC, FM3, +FM4, Freedom E SPI, Kinetis, LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900, +LPCSPIFI, Marvell QSPI, Milandr, NIIET, NuMicro, PIC32mx, PSoC4, PSoC5LP, +SiM3x, Stellaris, STM32, STMSMI, STR7x, STR9x, nRF51; NAND controllers of +AT91SAM9, LPC3180, LPC32xx, i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, +S3C6400, XMC1xxx, XMC4xxx. ================== @@ -276,18 +277,22 @@ e.g. for cross-building for Windows 32-bit with MinGW on Debian: To make pkg-config work nicely for cross-compiling, you might need an additional wrapper script as described at - http://www.flameeyes.eu/autotools-mythbuster/pkgconfig/cross-compiling.html + https://autotools.io/pkgconfig/cross-compiling.html This is needed to tell pkg-config where to look for the target libraries that OpenOCD depends on. Alternatively, you can specify *_CFLAGS and *_LIBS environment variables directly, see "./configure --help" for the details. +For a more or less complete script that does all this for you, see + + contrib/cross-build.sh + Parallel Port Dongles --------------------- If you want to access the parallel port using the PPDEV interface you -have to specify both --enable-parport AND --enable-parport-ppdev, since the +have to specify both --enable-parport AND --enable-parport-ppdev, since the later option is an option to the parport driver. The same is true for the --enable-parport-giveio option, you have to